Very Slow Copy From One Hardrive To Another
May 13, 2012
I see this complaint all over the internet and no answers other than for users to look at drives and use Tera Copy, disable windows firewall, virus protection, adjust some settings like encryption, fetch off, etc., get drivers, hot fixes. I have done all those like other people suffering problem and like others did no good.I have 2 internal 1 TB SATA III drives and for all practical purposes cannot copy large files between them at most times. Windows 7 professional with all updates (I presume, have auto-update on). I can copy a 700MB file from an XP machine to either of the Win 7 drives in 15 -20 seconds and if I try to copy the same file from Win 7 machine either way between the drives it estimates 30 min - a day or more and goes from 1/mb per second down to bytes/sec. If I go to XP machine and from attched folders there move a file from one of the Win 7 drives to the other Win 7 drive, the move is again < 30 seconds.
Task manager shows virtually no cpu activity during the copy done on Win 7 machine. Note, from Win 7 machine, if I copy from attached folder from xp machine to local folder, speed is fine for main drive (c) but slow on secondary drive.What possible driver or hardware problem could cause snail pace from Win 7 machine drive to drive, but normal (100MB+/sec speed) when copying drive to drive from XP machine over local net?To complicate things: this morning, after 3 or 4 days working on this problem, computer woke up and speed normal for all drives, but I would bet the farm that this will revert back to normal state next time I really need it. It's insane that if I want to copy a large file or folder from one drive to another, I have to go to my XP machine and do it over my local network.
View 1 Replies
ADVERTISEMENT
Aug 9, 2011
when I move, delete, copy...........it takes a long time.It appears that before anything can happen W7 wants to read and load the icons from the files.
View 1 Replies
View Related
Jul 20, 2011
have win 7 ultimate 64, home network over wifi to my wife laptop, router sisco e3000. CPU : qx9850 (@3800 MHz), VGA Ati 5870, motherboard asus p5q deluxe ( or how this model) 8 gb gskill DDRII 1200 MHz . 3 sataII hdd, case xcilio 1000. All stable and not overheating. Games runs good. BUT! When I start to copy files ( like films, music and etc large one) my entire omg fast crazy pc slow down and become really slow!!! And speed over Ethernet is 2 mb/sec or 2,3. Ok, leve the speed it's Over wifi so w/e. I tried to set up netsh rss enable, autotuninglevel disable, chimney enabled . Did link Speed & duplex auto I can remove ipv6 but home network require it.
View 2 Replies
View Related
Sep 25, 2011
I have been getting a request from Avast antivirus to run this file [code] So far I have denied access and moved it to chest. Is this a false positive or is it an infection? Also, a couple of days ago I was greeted by a blue screen while working on my computer. What I can remember from that blue screen is "Technical Error:"What could be the reason for this blue screen? My computer seems to lag and runs slow while performing simple tasks like copy-paste, etc.
View 3 Replies
View Related
Jan 13, 2009
I'd like to know, how would i go about installing Windows 7 onto my second hardrive? I'm running Vista Ultiamte SP1 32-Bit on my main hardrive, but now today I've formatted my other hardrive, so would i have to run the installaton on Windows? Or do i have to run the installation through boot-up and pick the second hardrive?
View 3 Replies
View Related
Oct 29, 2012
My laptop started randomly shutting down a while ago but only when i play a game, but if i have both of my 3d modeling programs, itunes, chrome, and other programs running the computer would run fine for hours on end. A couple days ago the laptop did its usual random shutdown. so i started it back up and the mouse wouldnt work. so after opening it up and reconneting the cable to the board the computer wont boot. It'll get to the starting windows screen but after a minute or two it show a blue screen for about a fraction of a second then restart. It'll keep doing that till i uplug it and take the battery out. I cant start in any of the safe mode options, i cant launch windows repair. Im not able to use a recovery disc cuz the laptop didnt come with one. I basically cant do anything. Now the computer will shut down randomly again but during startup, but the laptop is still cold. So now i decided to take out the hardrive hoping to either save the files or most of them at least or to find the cause of my problem and fixing it. After i hook the hard drive up to my desktop via SATA cable it shows up in My Computer as System Reserved and Local Disk (F: ) but i cant access local disk but i can access system reserve. At the top of the explorer i just get a green bar that never reaches the end and when i click on local disk the explorer becomes unresponsive and what not.
I open devices and printers and it read the hard drive as usb storage so i checked device manager and it recongizes it as a Hitachi Hard Disk. When i click on disk management Nothing happens besides at the bottom it says " Connecting to Virtual Disk Service" for an extreme amount of time. I also tried booting the hard drive on the desktop but it goes through the same proccess as it did on the laptop and i also cant do anything.
View 2 Replies
View Related
May 21, 2009
My first install of Windows 7 was the update version. Now I'm having freezing up issues and want to do a fresh install. So my first thought was to format the hard drive, but it say that it has too big of volume. How do i get around that and do a fresh install? Any help is welcomed.
View 8 Replies
View Related
Jul 15, 2012
i am having issues installing windows on a gateway GT5622 it gets stuck on expanding i tried three cds and three different images. I also tried to reinstalled vista it can't seem to expand anything. I have also tried this with only one ram stick... nothing works am i missing a setting in the bios thats not allowing it to write to the disk?I would like to install the image on the hardrive outside the pc with my laptop i have a dock and plenty of images just don't know how to put a new bootable copy of windows on the disk
View 5 Replies
View Related
Apr 2, 2012
I've been directed over here by the malware board. My computer has a rootkit virus and it has been recommended to me that I reformat my hardrive. I am terrified of doing it wrong and would feel comfortable if one of your clever folk could help me through it. I have windows 7 home premium on a sony viao with a 64bit operating system. I can't seem to find any recovery disks,on the system restore options its seems i can only restore it to an earlier point in time.
View 1 Replies
View Related
Jul 2, 2012
My XP machine HD started to fail and after numerous tries to fix it, I purchased a new Windows 7 machine. I took the internal HD out of the Xp machine and put it in a docking station to USB and it shows up as Drive K on the windows 7 machine. I wanted to drag and drop some files from it, but can't find most of them! What is odd, is most files aren't showing - no music files, no doc files - the drive seems to be working/reading ok. I also noticed there are no individual user accounts. I've turned on "show all hidden files" and I"ve given ownership of the whole K drive and folders to everyone and my username, but no files show. The drive shows it is almost full, so SOMETHING is on there.
View 7 Replies
View Related
Dec 17, 2012
I recently had to get a new hardrive on my laptop. Before this change, I disabled the laptop mousepad and used a regular mouse. I disabled it by going to control panel, clicking on mouse and disable something called 'elan'. (sorry, not computer literate LOL) . Anyway, since the hardware change, this elan option is not there. I am still using the regular mouse but the laptop mouse is still going
View 4 Replies
View Related
Jan 8, 2012
I had this problem last week when all my folders in my hardrive turned into a .lnk file or shortcuts. They said that it was a virus and i tried to unhide all the folders including hidden files, system files, etc. throught attrib in Dos command (c: attrib -r - a - s - h /s /d /l g:*.*)I finally got all my files and folders and deleted all those shortcuts and .lnk files, then scan with my antivirus,antispyware and malware. It all worked out. But the thing is... all the folders/files that supposed to be hidden is now showing. I have a 500GB external drive with a thousand files on it.I dont know which files/folder should hide and others that shouldn't be. Is there any command/system/software to be used in order to make my files/folders in external hardrive back to where it should be?
View 2 Replies
View Related
Apr 23, 2012
I got my hands on a product key for Windows 7 64bit enterprise for my spanking new PC build. How can I go about using it? Do I just burn any Windows 7 64 bit ISO to a blank dvd and install it on my new hardrive? Does it have to be a specific copy?
View 2 Replies
View Related
Jul 16, 2012
i am trying to put a boot-able image of windows on a hardrive for another computer without using the pc. I have the hardrive in a dock. How can i put a bootable windows image on a hardisk other than the one in my computer.
View 10 Replies
View Related
Jul 16, 2012
I have a segate 250GB hard disk, previously i had a HP laptop windows vista OS so it was easy for me to see hidden files on my harddisk but now in this windows 7 there is no option of viewiing hidden files
View 4 Replies
View Related
Jul 17, 2012
how do i transfer my portable hardrive to new computer windows 7?
View 1 Replies
View Related
Apr 9, 2011
I have built a new PC, I had it working at the start. for couple of days. i started then to update and install drivers off the chipset support disc. I have a ASUS P5G4IT-M, the installion of these drivers seemed to go alrite. Then when I downloaded the updates through windows and tried to restart the PC it wouldn't restart. i tried repairing the error. The first time it said windows had repaired the errors but it still didn't work. so i tried it again, it keeping saying that I recently attached a device to the computer, such as a camera or portable music device. which i didn't. then i says remove and restart. When i restart after the windows repair it goes down the list of files loading in safe mode and it stops when loading some of the drivers. Is there some way of clearing this error or wiping the memory off my hardrive and loading windows again onto the PC??
View 4 Replies
View Related
May 14, 2011
I'm looking at getting an external storage device to store my files on, and I can't decide what to get.Is there a massive difference between between an external hardrive, and a Desktop hard drive? These are the ones I can't decide from..Western Digital 1TB Elements External Hard Drive | Littlewoods.com..Is there much difference between the two? Which one would suit me better? I'm running a samsung rv510 laptop.
View 4 Replies
View Related
Jan 15, 2012
I have one internal drive with 1 TB. The data there is very important to me , so I bought External removable drive for backup. Now, I want to copy the data from one drive to the second drive but I have to be sure I have a perfect copy of the data. The data is mostly songs movies and documents. I'm using windows 7.
My question is this:
1.If I'll transfer the data through windows 7 by copy and paste, I could be sure i have a perfect copy? 2.There are tools for comparison Between the original data to the data that was copied?
View 4 Replies
View Related
Nov 11, 2011
What is the best free program that can copy discs to ISO files and also burn them, even if they are copy protected?
View 4 Replies
View Related
Mar 17, 2012
How can I get Windows 7 to name copied files using the scheme "Copy of" (used in Windows XP and earlier) instead of the default scheme "- Copy", whenever a file is copied to the same directory as the original file?In other words, if you copy a file named "Foo.txt" in a directory to the same directory, Windows XP would have named that file "Copy of Foo.txt", but Windows 7 names the file "Foo - Copy.txt". I want the copy to be named "Copy of Foo.txt".There are several reasons why I prefer the XP style file name:
1. It is familiar :-)
2. I have existing files that use the XP style file names, and I want all my file copies to use the same naming scheme. I guess I can do a massive file rename across all my backups, but that would solve only one of my problems.
3. Most of my folders are sorted by name, and using XP style would sort all copies together. On other forums it has been suggested that one can simply sort by date (to get the copies sorted together), but that advice assumes that all copies are created after all other files are created, which is actually not often the case.
4. I often work with long file names, which means that the end of the file name is often obscured, unless I have wide windows (not always possible) and use lots of horizontal scrolling every time I want to select a file. Hovering over a file to get its full name is a cumbersome solution.
5. On other forums some have given the advice to always make copies in subfolders, but I often make copies or copies of copies while I work (it allows me to roll back or to check earlier versions of a file quickly, during my work), and using subfolders would slow me down tremendously (not to mention confuse me).
I know that when TeraCopy is made the copy handler, it renames files in a different way than Windows 7 does, though unfortunately not the way Windows XP did it. Also, if one installs a third-party directory program such as Opus, it asks for a file name every time a copy is made, but I need something that simply names the file correctly immediately.
View 1 Replies
View Related
Nov 30, 2009
I have installed windows 7 evaluation copy build 7201 and i want to find out if i will be able to upgrade it to the original copy and how? Any suggestions?
View 3 Replies
View Related
Nov 23, 2011
I reimaged my computer because I was having a whole bunch of trubble with it (no of which really matter now). After reimaging I tried to access some of the files I saved on my external hard drive, but no matter what I tried I could not get access to the files.The drive appears in device Manager and in the USB Device pages, and I have tried uninstalling and reinstalling the drive. But for some reason I just can't access the device.
View 3 Replies
View Related
Dec 27, 2012
Today when I was surfing on my laptop (G74S Series) I wanted to restart the laptop because the internet crashed and it usually helps to restart. But I restarted it holding down the power button thing.So, I restarted it and while I was waiting, staring in to the screen, the blinking "_" thing when you start up was doing that for a while and nothing was happening, and a couple of seconds later the computer tells me that it can't boot the laptop/pc because no drive was found. I saw an error code but I didn't catch it, but it was something like "0x0000".So then on later, it sent me in to "Image Restore" But I have no image to restore with, so I cancel it, and then it sends me into the menu where. I can choose to "Restore Computer" or "Scan for startup errors" or something like that (I don't really have a such accurate memory.)And on the top it also says "os unknown on (unknown) local disk".Everytime I start the computer it sends me to that menu where I can choose to restore my computer etc..And I can't really do much about it since I don't have the windows 7 disc/dvd thing either.And this all came all so sudden I don't really know what to do.I don't have any backu or anything, and windows can only detect my /D: drive and not /C:, and I have my OS on /C/
View 2 Replies
View Related
Nov 18, 2011
I bought this Fujitsu laptop for less than a year. Its only for my school work. It takes forever to bootup, startup and it sometime hangs when I open up a program or typing.For the bootup, it takes very long time on the window logo, after that the black screen, followed by the welcome page with the loading cursor. Each of this process take a long time. For startup, its not so long but its still quite lag. For the opening up of program and typing, everytime I open up my visual studio, it will take a long time to show up and even if it showed up, it will be "not responding".So I will have to open it a second time before I can start using itWhen I am typing my codes, it will randomly hang and show that the program is not responding. I am still able to move my cursor though.
View 9 Replies
View Related
Jan 15, 2013
Win 7 Slow thru-out, especially loading of IE9 and Firefox. [code]
View 4 Replies
View Related
Dec 4, 2010
Do you know how to add "Copy path" and "copy name" to context menu? Like this screen shot!
View 9 Replies
View Related
May 25, 2011
i have Windows 7 x64, i need a copy of ci.dll it's located C:WindowsSystem32ci.dll
View 4 Replies
View Related
Dec 14, 2011
I added a 2nd hdd by sata!can i clone my hdd so i can boot the 2nd one with the same windows 7 for games e.t.c and boot the first one for just internet a system files.
View 9 Replies
View Related
Jan 7, 2010
got a question about copying a dvd i have here. It was a dvd made for me of P90X and im trying to make 2 copies of it. I have blank DVD's on hand, dvd burner ready to go..just not sure of a good program to use. If you guys have any recommended free-ware, or if windows 7 now incorporates this action, please let me know.
View 3 Replies
View Related
Oct 4, 2012
The situation is that i'd have to copy some files from a pendrive but without being able to control the computer during that time. So i was wondering if there's any way to start a program which copies files with the same beginning and do this on pendrive connecting.
View 3 Replies
View Related
