User Files Will Be Deleted If Reformat System Partition?
Aug 4, 2012
I'm planning to re-install my OS and I'm backing-up my files. Right now my 'User' files (Desktop, Downloads, My Pictures, My Music, My Documents, and My Videos) are currently located in D: (I used the 'Location' tab in the properties to move each folder from C: to D: ) Now, my question is: Would my 'User' files that are currently located in D:, be deleted when I reformat and re-install my OS in my system partition (which is C:). This came into my mind because in my understanding of moving the 'User' files using the 'Location' tab, means that the files and folders are stored in D:, but still linked in C:
From my husband's Admin account, I deleted my own User Account, but the account is still there (with a lock icon on it) and I am unable to delete it (gives me the message that the folder is open or in use by another program). I changed the owner to my husband (checked the box "Replace owner on subcontainers and objects") as suggested on this thread and I still can't delete it.istory:- My user profile was corrupted, got the message that a temporary user profile was created.- Rather than going the route of going into the registry as suggested here, I deleted the account but kept the files (was this my mistake)?- When I went to create a new account, it appended HOME.DESKTOP to the end of my name
For some reason i have to change my partition table from MBR to GPT. So i made a backup of my c drive using Acronis. But when i tried to restore my Windows, I got a message BOOTMGR missing press cntrl+alt+del to restart. Then i came to know that ultimate edition has a hidden partition called system reserved. Is there any way to restore my windows with same programs and drivers. Something like reinstalling windows 7 x64 ultimate and replacing everything by backup except boot files?
Here is what happened to me, I had windows 7 installed on a SATA HDD. I bought an SSD and installed a fresh copy of windows 7 on the SSD. then I took out the SATA harddrive which I learned it contained the system parition. Now the new windows doesnt boot.
If I open diskpart and do a LIST VOL I only get one which is the SSD and inside I only have one partition with the windows files.
After a few comamnd I was able to see the installation when I start the recovery console. but when boot up. as soon as the little cicles for the windows logo comes up it freezes and reboots.
I tried making the volume parition active, but from what I have read, looks like I need to create a system parition. Is that possible. or do I have to reinstall from scrtach. (the old SATA drive is formated so no going back) Its just so close, i see my data intact on the drive lol but cant get windows to boot.
I accidently deleted my system reserved partition I only have one system installed on my pc, so no dual boot is needed or anything, I think it created a seperate system partition because of a windows.old folder, which has already been deleted now, because it took too much space. So now when I start up my pc i get the error that my bootmgr is missing. I tried repairing it by inserting the windows 7 dvd and using the repair, but when I click on windows 7 and i try to repair it it says it's the wrong version of windows. My language settings are set correctly so that's not the problem. I then tried to do it by pressing shift + f10 to get into the command line and using the following commands: Bootrec.exe /FixMbr Bootrec.exe /FixBoot Bootrec.exe /ScanOs Bootrec.exe /RebuildBcd however the scanos and rebuildbcd can't find any windows installation. If i put in my windows 7 dvd and i startup my pc, it works fine, because it then uses the bootmgr from the Windows 7 dvd. So I thought, let's just copy the bootmgr.exe to my windows. But this didn't work either.
I recently bought a new Toshiba Portege R705-P41 which came loaded with a ton of crap so I attempted to do a clean install but somehow managed to deleted the "System" partition.Now the laptop wont boot and I stupidly didn't create a system restore point so I'm freaking out a little bit.Is there any way I can get whatever was in the System partition back so the computer will boot and I can reinstall Windows 7?
I was trying to get a dual boot setup of Windows 7 and Ubuntu where I had 1 partition for Windows 7, another for Ubuntu, and a third neutral partition accessible from either OS where I would house all of my data. The problem is, my computer already had 3 partitions set up: Windows 7, the system boot partition, and one called PQService. Because I could not find a tutorial to delete pqservice, I decided to delete my system partition, even though this seemed a little more risky (apparently it was lol.) I used this tutorial: TeraByte Unlimited Knowledge Base to copy the boot files to the windows partition and delete it. I then booted into a Live CD of Ubuntu, and used Gparted to move my Windows 7 partition in order to get rid of the 100MB of unallocated hard drive space. I then attempted to restart my computer into Windows and i got an error saying that windows could not boot because of some recent hardware changes. Is there anyway I could get back into windows without reinstalling it? Do I need to figure out some way to restore my System partition? Is there someway I could get windows to boot without doing either of those?
I am Ranko, from Europe ( Serbia, but in the eyes of world not so desired country so I do not mention it... but great food , great parties and the most beautiful girls should compensate )Ok. What I did. During Win 7 installation on my new Lenovo G780 ( 500gb HDD ) , I have deleted system ( 0 ) partition firstWin 7 offered/created 30gb system, 30gb primary, 440gb primary 2 ( unallocated ) and one Lenovo OEM partition 1mb.As my friend said , always first go from behind but I didint. Now I am missing 30gb of space, and can not retrieve it. So if I do installation from the beginning i just have 470 GB of space to alocate to partitions ( for example 100mb system , 100gb Primary & 369gb Primary 2 )So 30GB seems lost. I have installed win 7 and run diskmgmt.msc and only 1 disk with 470gb is shown.I tried linux with that partition software and the same... it shows just 470gb of space...30GB are missing/lost/not existing.Once again... so sorry guys for posting this issue since maybe it is something that is common, but I really do not want to give up. It is not up to 30GB , it is about the principle , I have to retrieve it!
I was manually deleting a virus on my computer because no antivirus software could detect it and in the process I accidentally deleted a couple of system files, i think one of them was spider.exe, now my programmes wont open properly, only some of them will open and i have to right click and run as administrator for it to actually open, i really don't want to restore my computer, does anyone have any suggestions. I'm running windows 7, starter pack of that makes any difference?
I just reinstalled Windows and I mistook my C drive for my Windows.Old file and I highlighted everything and clicked delete even after I was prompted about system files. My machine is running fine and I'm getting no warnings but I want to know what files I deleted and if there's a way to get these files back without losing everything that I reinstalled. Is there a utility to scan for any missing system files?
I accidently managed to delete all files in my c:/users directory and now my system won't go into standby or hibernate mode. It just shows a blank screen when I choose either or these but the PC never hibernates or sleeps and the only way to get it out of this state is a hard shutdown. I deleted all Files/Folders except my own user folder.
s, I have an Asus laptop. I had windows 7 installed on it twice, and my brother decided he "didnt need one of them" so he deleted the original install.He literally deleted all the original system files and apparently the drivers for the hardware as well. My disc drive no longer works. When I try to load windows 7 from a USB stick, it will go through the entire process, and then it will restart and say it doesn't work. So basically, I'm doomed? 64bit, as well as linux ubuntu 11.10 None of these will boot.I've tried installing it into the hard drive, as well as just booting from the USB stick I have, and no luck.And I'm not doing anything wrong that i can see, I've installed OS's from USB and discs tons of times.
In XP, I re-directed My Documents to a Data partition. In my old computer with Windows 7, I think I used TweakUI (which worked) and Junction for my iTunes folder.In my new Windows 7 laptop, I read about this mklink feature (which seemed to pass me by). Before I got a chance to use this, I selected all of the visible (non-system) folders in c:usersmyusername and cut 'n' pasted them to d:usersmyusername.To cut a long story short, this worked. Obviously i know it didn't move system related folders but it works.Basically it looks like Windows has automatically changed the target of the folders I moved . Is this right?
I just bought a second hand Dell Latitude E6510 laptop on which I need to do a clean install of Windows 7. I have been able to do this, but it's been years and I forget.
I used Partition Wizard 6.0 the last few times, but need some guidance now. So, I have:
- A used machine I want to wipe clean and then start from scratch, eventually allowing it to boot from the Windows 7 installation disk.
- Umpteen utilities besides Partition Wizard
- A keen desire to have this happen while I'm still young
I have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me error saying Setup was unable to create a new system partition or locate an existing system partition.
I have a copy of windows 7 from a friend. (USB, possibly enterprise)It runs well, is official and can be re installed and is verified through the Microsoft site, so the media doesn't seem to be a problem.I was able to install Win7 Ult x64 on my WinVista HomePrem x86, but I went back through to clean the hard drive (it was full, I didn't format before) and after low level formatting I cannot reinstall the OS. The harddrives are completely empty, and I get stuck at "Setup was unable to create a new system partition or locate an existing system partition," after hitting next when you are selecting the HD partition to install on. I tried a couple of things already:
-Installing on another harddrive -Formatting using Hiren's bootcd -Using a hard drive with XP installed to see if it is an upgrade and not a full version (no luck, still wouldn't install) -diskpart > list disk > select disk 0 > list partition > active \ in cmd..I have three hard drives attached to the computer right now, they can't all be broken. T.T
Is it safe to delete the system reserve partition when I reformat or just leave it as such. Few programs are corrupting my system settings and I need to do a clean install.
I just got a new computer. I had my User Account setup, had a password on it. I was making sure Windows was up to date, had to restart, then restarted on its own again(I'm assuming part of the update), and when it booted back up, it said my account has been disabled. Please contact your system administrator. I can sign in under Administrator, or Other User. The password I set up with my account doesn't work for Administrator. Is there a default password?
Just recently i had to reformat my computer, i had some pretty personal documents where i placed in a password protected folder. I forgot exactly how i password protected it but to access the file i would click on a file called locker, and a black screen would open up, i would type in the password push enter and the file would appear, then to lock it i just open locker again and push "y".
I had to reformat my computer so copied all the contents that was inside the folder (and not the locker) onto a hard drive and reformmated my computer, however, now i cannot access these files. I can see them but they all say access denied due to permission rights.
I've followed all the security changes ive found and made myself the owner, set security settings to full control etc however, still cannot access these files. They are really important and was wondering if there was a way i can access them again or is there any programs that can unlock them? Ive tried all the programs similar to |unlocker"
