Unable To Install HP Photosmart 6510
Feb 20, 2012I am trying to install a new HP printer and I get the following error message. Windows cannot find C:UsersSandyAppDataLocalTemp7zS3FF3HP-DQEXS.exe, I can find one called Sandy-PCUsers
View 9 RepliesI am trying to install a new HP printer and I get the following error message. Windows cannot find C:UsersSandyAppDataLocalTemp7zS3FF3HP-DQEXS.exe, I can find one called Sandy-PCUsers
View 9 RepliesCurrently using win 7 Ultimate RC on a spare rig
Im trying to install this.
1.I have the Install file in XP mode but Im getting errors regarding an missing xxx.exe file (hpxx.exe)/forgot during install. So it doesnt complete.
2.So I leave to windows via update to find it > device driver fails even when it connects to the internet
3.looked at HP site and sais Deskjet 5600 is the compatible driver so I manually CHOOSE from the driver list (within windows) but fails
note>
something I missed? I currently have the RTM PRO version but havent installed it. Waiting awhile till Im near expiry date.
PC= Pentium 4@3.4 with 1gb of ram corsair
+I looked at the HP site only directs me to a guide for alternate drivers (5600)
my mom purchased the hp d110 all in one series printer. it has the scanner, and the fax. she must have had it for nearly 2 1/2 years. Ive tried numerous times to install the printer for her and i havent found the correct way to do it. I connected it to wifi, and it will print, but too many copies and just jibberish. i tried to re install it and it says it doesnt have the correct driver.
View 1 Replies View RelatedI'm trying to install a HP Photosmart Prem C410 series onto a new HP laptop which is part of a home wireless network. It seems like it loads but when I go to "printers" it isn't there. Also when it gets to the "print test page" of the installation nothing prints.
View 1 Replies View RelatedI'm an IT student who got a free Win 7 x64 disk from my school, and I am unable to do a clean install. My system specs are as follows:
Intel Core 2 Duo 3.12 Ghz
nVidia GeForce 9800 GTX 512 MB PCI-e
320 GB Western Digital HD SATA
1 Gb DDR2 1066 MHz and 2x2Gb DDR2 1066 MHz SDRAM
I set my boot sequence to boot from DVD-ROM drive first, and HD second. It goes to the "Windows is loading files" screen and gets hung up. I started the process and went to watch TV for an hour, and it is still on the "Windows is loading files" screen. I haven't gotten any error messages. I've unplugged all USB devices from my computer as I have seen on this forum that it has worked for some people.
edited to add: I originally had only 2 Gb of RAM, and it got hung up at the "Windows is loading files" screen. I thought it was getting hung up because I didn't have enough RAM, so I bought brand new 2 sticks of 2 Gb RAM. I took out one of the 1 Gb sticks and placed both of the 2 Gb of RAM...for a total of 5 Gigs. And, it is still doing the same thing.
i got the printer HP photosmart C4380. wonder if anyone know if there is a way to install it in Windows 7 ( i use build 7229 ) with HP´s software, i know windows 7 install´s it fine on it own, but i would like to use hp´s software.
View 7 Replies View RelatedI have an HP Photosmart Plus B209a-m and have been trying to install the driver on my computer. I have Windows 7 32 bit. I have the installation CD, but that doesn't seem to do anything. I have gone to the HP Customer Care site and tried to install the driver for x32, but my cpu does not show the printer and the device that was added says it needs troubleshooting (which doesn't work). Another computer in the house has a 64 bit system and installed it without any problems. I want to be able to scan wirelessly. What more can I do!?
View 5 Replies View Relatedany software or driver for my printer and scanner?
View 8 Replies View Relatedi am hoping some body can help we have a hp photosmart c5180 printer and ever since i have installed windows 7 all the pics are coming out darker than the picture .
i have tried the printer via network connected or via the usb port and it seems to make no difference
but if you print from my wifes vista computer they come out fine .
has any body come across this before and if so how can i sort it .
My HP Photosmart 7600 series printer won't install or work at all in Windows 7. No updated drivers available. I just love this printer. Nothing wrong with it and it prints beautifully. Since this is a beta OS, is it a possibility that later down the road, drivers might be availablle? This HP printer is a 2003 model, but perfectly good. Newer ones are too expensive in this horrible economy.
View 9 Replies View RelatedI am running Windows 7 RC 64 bit & 32 bit (on separate machines) and am very pleased with the performance compared with Vista. I successfully installed my HP 2610 All in One printer using the latest HP software available (for Vista) and everything works fine, including the scanner. However, every time I start my computer, Windows informs me it is installing Device Driver’, but after a few seconds it then informs me that “Device Driver Software was Not Successfully Installed, (this applies to the HP 2610 Printer). It happens every time I start Windows 7 and is the same on 64 bit & 32 bit installations. How can I stop Windows trying to install the device driver? (as a printer, it does not show in the device driver list).
View 9 Replies View Relatedwhen i tried clicking windows update to get more drivers
i get this pop up message frmo windows saying
windows was unable to get devices list from windows update
please try again
and i've tried so amny times it keeps on saying that.
can someone help me?
i dont want to buy a new printer
cuz i've done this method before and it worked fine
but since i had system restore, it was gone
and not working now.
When I turn my printer on, a window pops up requesting that I download the appropriate driver. I click on the button, it takes me to Hp's website, my OS options are Win Vista, Win XP, and Win 2000 (?!). I have tried all three. It downloads, then I open the file and I get the original window (must download driver)!!! AGH! Has anyone found a solution, short of reverting back to Vista?
View 1 Replies View RelatedRunning Windows 7 RTM 64 bit and looking for drivers or some guidance on drivers for HP 7960. I have tried the vista 64 bit driver from HP for the 7960 printer and while the driver installs without error, still cannot get it to print.
View 5 Replies View RelatedNeed Driver For HP Photosmart C4283 All In One
Edit: ohh, thx, now i dont need help about hp, have me problem with driver "PCI Simple Communications Controller, how i can fix it.
hp psc 2410 photosmart All-in-One Need Driver!Help need frivers for windows 7
View 1 Replies View RelatedI had my P1100 colour inkjet printer for over 4 years; working perfectly under XP-Pro.
After installing Windows 7 (dual boot), the P1100 printer could not install.
HP's web site stated that no drivers would be available. As there were no Vista drivers either, I thought I had to scrap the printer.
Then I had a go of systematically installing printers from the list (Control panelSystemDevice Manager etc.)
Eventually I came to HP DeskJet 970Cse and its driver - BINGO!
The Testpage printed ok and so does everything else, including Duplex printing.
Moral - think outside the box, don't give up
I hope this may work for other printers, where no Vista or Windows 7 driver is available.
I had trouble using the xp64 driver and did not want to download and install the full (huge) vista 64 driver package for this all in one printer. I tried to add printer but there was not an Photosmart 2570 series to pick from the windows driver list. So I tried the available 2600 series driver and some what to my surprise the 2600 series driver works..
View 9 Replies View RelatedI urgently need the driver of HP All-in-One series C7280 for Windows 7.It didn't install it when I choose Vista.
View 3 Replies View RelatedI'm having trouble installing a driver for this printer. I've tried to run the setup file I obtained from HP in any type of compatibility mode and it still won't go into the setup mode for the driver. Any suggestions?
View 2 Replies View RelatedI am in terrible trouble with drivers for an HP C 7280 Photosmart All in One.
The device has been working perfectly well under Windows 7 build 7000, and more lately with 7057 upgrade.
Starting with some unexplained problem in printing I tried to reinstall the driver-I had a file sitting in my Downloads file. BIG MISTAKE!. It found that the installation I had was incompatible and said it would remove these elements (or something similar).
Net result is that now Windows won't/can't recognize the printer when it i plugged in (USB), won't allow any other HP driver to install (doesn't recognize Windows 7 OS) and in some way I don't understand had the effect of slowing my system down to less than a crawl -(it took a good 10 minutes to reboot)-windows were appearing slowly like ghosts (so the nVidia GeoForce card was affected).
Eventually I was forced to a system restore. I removed all of the HP files from the system I could. Rebooting was again a 10 minute job, etc. Eventually I did another system restore to an even earlier time, and at leas the system is working sufficiently for me to send off this plea for help from anyone.
How can a printer driver wreak such havoc on a system?
I upgraded my laptop from Vista to Windows 7. I'm on a wireless network and tried to print onto my HP Photosmart c6180 and it didnt' work. So I figured I would go to HP's website to see if there was an additional patch to download and sure enough there was. But it still didn't print.
Long story short, I uninstalled and then went to HP's website to reinstall for Windows 7. The file name was: AIO_CDA_FSW_Full_Win_WW_130_140.exe(1/1 , 290.27M).
I kept getting "timed out" errors from their website during the download process so after a few tries, I ended up calling HP's tech support to ask why their version for Windows 7 was not working? They told me that my printer was not compatible with Windows 7 yet it simply was available on for download on their website. What gives? Can anyone please help me to get my new Windows 7 to work with my printer?
I bought a hp photosmart 5100 printer and I cannot get the cd to install software and drivers. Can I download these?
View 1 Replies View Relatedhow to check ink levels on the hp photosmart 6180 all-in-one when using windows 7?
View 2 Replies View RelatedI got the Vista 64-bit drivers for my printer, but when it ask whether I wanted to connect via USB or network, and I clicked network, it just kept re-opening. It presume it is having difficulties connecting to the printer. Any good drivers you can recommend that might work? I am running 7 in 64-bit.
View 5 Replies View Relatedwill HP Photosmart C4580 printer be recognized by my copy of Windows7 which I intend to install at the weekend?
View 6 Replies View RelatedI tried to install the HP driver for a Photosmart 3210 all-in-one printer (Vista 64 bit version) and it worked with the compatibility mode.
Now the printer/scanner works, but everytime I boot it will try to update the driver, then it fails and tell me that the driver could not be installed. What should I do?
I began to add programs and printers and when I added my HP Photosmart 2575 and then its Vista drivers. I then made another backup of the what I had added to that point. I now get a 9F stop on shutting down after I have done something with the printer as simple as printing a page.
I restored to the original installation and added the Photosmart using only the RC's driver. All is well under that setup and would like to go back to the second backup and uninstall the Vista drivers and use the RC's drivers but can't find any way to roll back the driver to RC one. If I try 'New Driver', the system seems only to find the Vista driver.
How can I delete the Vista driver from my system so that I have only the RC drivers?
I have problem installing driver for my HP Photosmart 7550 printer.
I do everything that is told on the official HP website - Installing and Configuring an Alternate Driver in Windows Vista HP Photosmart 7550 Printer - HP Customer Care (United States - English)
I can't do the following that is told in this guide in step 2:
"9. After a message appears on the computer that the product was added successfully, connect the USB cable to the product and to the computer.
10. On the Found New Hardware screen, click Cancel".
In other words this found new hardware pop-up appears but there is no way to cancel it in windows 7. It always installs drivers by its own and I can't interrupt this process!
However I have no problem actually getting the printer to work and even print the test page.
But I have this thing in the Control Panel -> Printers section (screenshot).
I tried many times to remove all drivers for my printer and printer itself, but every time I plug it to my PC found new hardware appears and installs its own drivers... How can I stop it from doing this because actually this printer is already installed in my system and works flawlessly.
I am running on my new HP Pavilion ds6 and need this driver if it exists.HP e-mail support advised to create a new driver using the properties fora HP Deskjet 970cse but that did not work for me
View 4 Replies View RelatedI could not print with my HP photosmart on windows 7. HP have a driver now, so I plugged in the printer and started trouble shoot, it fixed it, and now I can print directly onto DVD CDs. I had previously asked HP to let me know when a driver was available, but they have not.
View 5 Replies View Related