I tried to install the HP driver for a Photosmart 3210 all-in-one printer (Vista 64 bit version) and it worked with the compatibility mode.
Now the printer/scanner works, but everytime I boot it will try to update the driver, then it fails and tell me that the driver could not be installed. What should I do?
when i tried clicking windows update to get more drivers
i get this pop up message frmo windows saying
windows was unable to get devices list from windows update
please try again
and i've tried so amny times it keeps on saying that.
can someone help me?
i dont want to buy a new printer
cuz i've done this method before and it worked fine
but since i had system restore, it was gone
and not working now.
When I turn my printer on, a window pops up requesting that I download the appropriate driver. I click on the button, it takes me to Hp's website, my OS options are Win Vista, Win XP, and Win 2000 (?!). I have tried all three. It downloads, then I open the file and I get the original window (must download driver)!!! AGH! Has anyone found a solution, short of reverting back to Vista?
View 1 Replies View RelatedNeed Driver For HP Photosmart C4283 All In One
Edit: ohh, thx, now i dont need help about hp, have me problem with driver "PCI Simple Communications Controller, how i can fix it.
hp psc 2410 photosmart All-in-One Need Driver!Help need frivers for windows 7
View 1 Replies View RelatedI had my P1100 colour inkjet printer for over 4 years; working perfectly under XP-Pro.
After installing Windows 7 (dual boot), the P1100 printer could not install.
HP's web site stated that no drivers would be available. As there were no Vista drivers either, I thought I had to scrap the printer.
Then I had a go of systematically installing printers from the list (Control panelSystemDevice Manager etc.)
Eventually I came to HP DeskJet 970Cse and its driver - BINGO!
The Testpage printed ok and so does everything else, including Duplex printing.
Moral - think outside the box, don't give up
I hope this may work for other printers, where no Vista or Windows 7 driver is available.
I had trouble using the xp64 driver and did not want to download and install the full (huge) vista 64 driver package for this all in one printer. I tried to add printer but there was not an Photosmart 2570 series to pick from the windows driver list. So I tried the available 2600 series driver and some what to my surprise the 2600 series driver works..
View 9 Replies View RelatedI urgently need the driver of HP All-in-One series C7280 for Windows 7.It didn't install it when I choose Vista.
View 3 Replies View RelatedI began to add programs and printers and when I added my HP Photosmart 2575 and then its Vista drivers. I then made another backup of the what I had added to that point. I now get a 9F stop on shutting down after I have done something with the printer as simple as printing a page.
I restored to the original installation and added the Photosmart using only the RC's driver. All is well under that setup and would like to go back to the second backup and uninstall the Vista drivers and use the RC's drivers but can't find any way to roll back the driver to RC one. If I try 'New Driver', the system seems only to find the Vista driver.
How can I delete the Vista driver from my system so that I have only the RC drivers?
I am running on my new HP Pavilion ds6 and need this driver if it exists.HP e-mail support advised to create a new driver using the properties fora HP Deskjet 970cse but that did not work for me
View 4 Replies View RelatedI could not print with my HP photosmart on windows 7. HP have a driver now, so I plugged in the printer and started trouble shoot, it fixed it, and now I can print directly onto DVD CDs. I had previously asked HP to let me know when a driver was available, but they have not.
View 5 Replies View RelatedI want to download the driver for Hp Photosmart C4400 series.
View 1 Replies View RelatedLooking for Windows 7 third party printer driver for HP Photosmart 1000. HP doesn't offer it.Sad companies force consumers to buy products they really don,t need.
View 1 Replies View RelatedI have a hp photosmart 1115 and I cannot find a driver for it for windows 7
View 1 Replies View RelatedFree printer driver for HP Photosmart 1000 / windows 7
View 2 Replies View RelatedI need the driver of HP PhotoSmart 1000 for Windows 7, Vista
View 1 Replies View RelatedI purchased a pair of FX-7s and I'll be moving to Win7 x64 soon. I'd like to keep using them but it appears no such driver has been released by ABS. Can anyone help me locate a beta driver or something that may allow me to use them with my upgrade?
View 1 Replies View RelatedYesterday i upgraded from 7229 to 7232.
I had Hamachi installed and after installing Windows 7 7232. it didnt work.
Now i went into Device Manager but i can not uninstall it.
It uninstalls it but it stays in the list somehow.
I did a clean install of Windows 7 RC on a Dell 1545 which had been running Vista Basic.
All was well except that the DVD writer vanished from explorer and Device Manager at random intervals.
I re-installed the Vista Basic and the drive worked perfectly. I backed up the driver so I have a cdrom.inf and cdrom.sys from the working Vista system.
I then upgraded the Vista system to Windows 7 and sure enough the DVD drive problems came back.
I cannot find a way of replacing the Windows 7 driver with mt nice working Vista driver.
I can't update it as Windows 7 says the current one is the best, I can't delete the driver because apparently I need TrustedInstaller permissions, I can't give myself permissions as Windows 7 doesn't give me the option under the security tab on the driver folder.
am trying to install win7 (no beta) on Qosmio F30-140. I start the installation and the files are copying to the hdd. Then the computer starts again for the installation.
But every start is ending in a blue screen with error: stop 0x0000007E.
i have a joystick with 3D movement and vibration effect. on the joystick it is written that it is compatible with win 98/me/2000/xp/vista. i use win 7 32 bit. the joystick is recognized by the win7 and i'm able to run the self test of the joystick. however this joystick doesn't work in any of the games. i have to use mouse and keyboard. do i need to get a driver for win7 or what. kindly guide.
View 1 Replies View RelatedJust upgraded my Compaq Persario SR1550TX to Window 7 32 bit. The NIC card was not recognized. After chatting with HP they said there is no driver, as of yet, for the built-in Motherboard NIC for windows 7, good luck. (RealTek Sis)
So i went out and bought a Trendnet TEG-PCITXR NIC card. Windows Compatibility Website says it is compatible for Windows 7. After a reply from Trendnet technical support, there is no driver for Windows 7 for the NIC card.
Can anyone recommend a cheap NIC PCI card that has windows 7 driver? I have tried D-Link, Netgear and a lot of others but when I see if they have the driver for windows 7 they do not.
Anything under $25 bucks would be great. After 3 days of struggles any suggestions would be nice!
I have purchased and downloaded both 32 bit and 64 bit Windows7 Professional (no CDs or media here only download version)
I sucessfully upgraded from Vista 32 to Windows 7 32
Then I upgraded my hard disk (140Gb 500GB) and RAM (3GB to to 4GB)
Now I would like to go from Windows 7 32bit to 64bit
When I try and run the Windows 7-P-retail-en-us.x64.exe file it upacks the box then stops with this error:"We are unable to create or save files in the folder in which this application was downloaded. Please check the folder properties to make sure that you have security permission on the folder to write flies and that that folder is not read only".
I am the System Admin and I have full rights, and have moved the exe and the setup box files to My Documentsand I have modified the directory properties/attributes but I still get the same error over and over.
I searched the posts and some people stated one needs a clean install others say you can upgrade from any version so I am trying the upgrade here especially since the upgrade from Vista 32 to Windows 7 32 was smooth and did require all the extra work of a reinstall.
help me about the driver of D-Link DSL210 driver for Windows 7 64bit
View 2 Replies View RelatedDymo DiscPainter: Does anyone have information on where to get Windows 7 64-bit driver/software or when it will be available?
View 1 Replies View RelatedI have an Sony computer PCG 2D1M and I use the HDMI slot to connect with my Bose sound system.
Under Vista I had sound, after Upgrade Windows 7 Ultimate I have no sound, but all others works well.
My acutal driver is Sigma Tel High Definition Audio Codec, as producer is named IDT.
i just bought this new computer and every part of it seems to work like it should (atleast so i belive) and everything is starting nicely and everything is found in bios.
however when i try to install windows 7 x64 and when i come to the part where i have to choose which driver to install my windows 7 on, it cant find any driver.
I am having a problem with windows 7 Home premium. I have a PC with 3 ATI TV Wonder HD 600 USB ATSC tuners installed.
Everything works great, I can record three shows at once, with no issues on them, the problem comes when I let the PC sleep or hibernate. When it wakes from sleep - only one of the three tuners will work. I can go in and see that the signal strength on two of the tuners is showing red, while one shows green. If I reboot, they all show green in the signal strength and will work again.
I have tried plugging them into different USB hubs, problem persists.
I have tried the ATI drivers for the ATI USB 600 cards, and have tried the diamonmm drivers for the cards, and both still have the same issue. I have tried updating the vidoe drivers on my PC for the video card and problem persists.
I would really like the PC to go to sleep, but at this point it appears it will need to be on 24/7 in order to record with any reliability. Has anyone else seen this issue? any resolution? any suggestions?
I have an Asus P5K-e/WiFi AP and am interested in installing Windows 7. I looked on Asus' support site and they dont have a wireless driver for Windows 7, only a LAN driver.
Anyone come across a wireless driver for this mobo for Windows 7?
Do you have driver for HP Compaq Presario F762AU? I'm currently having crashing driver. I don't know which device that crash. After clean installation, my audio not detected. Internet can't be connected.
View 1 Replies View RelatedGetting the following "issue" and not sure how to proceed?
I went to intel and installed all the latest Windows 7 64bit drivers
I verified I have the latest bios from intel
I have the Intel DP35DP
I also am getting a PCI Simple Communication Controller that I can't find a driver for..I assume this is the old dell modem I have installed (Conexant RS56/SP-PCI - R6793-17)
Address a problem with Intel Active Management Technology
Your version of Intel Active Management Technology isn't compatible with this version of Windows.
Go online to the following article for more information about possible solutions to this problem:
Click to go online to the Microsoft website for the KB article
Which version of Windows am I using?
You are using Windows 7.
Computers that use Intel vPro technology may have devices that are unrecognized in the Windows 7 Device Manager.