The folder titles on my external hard drive are in green when I open them up with one laptop and I am unable to see my pictures and video. However, when I plug the drive into my other laptop... I can see them fine?? Both laptops are identical Compaq 6910p running Windows 7 with 4 gigs of Ram and 320 gig hard drive .
View 3 RepliesI am using folder lock 6.0 to lock folder on my two laptops. I have a WD External hard drive. I want to lock (password protect) some folders on the portable/external harddrive. I don't want aany encryption because I may forgot the password and may not be able to recover data. I also don't want to lock complete partition. I just want to make it hidden/password protected from casual users. Is it possible using folder lock? It has a portability feature but it requires to transfer all data to a locker. I have a very large amount of data which I want to lock (~100GB). Folder lock has a feature to lock any folder on hard drive but it dosn't work when it is external/portable hard drive.
View 9 Replies View RelatedI was using Ace Utilities to scan an external hard drive and I noticed that 35.5GB was taken up in a folder called $recycle.bin. Can I empty the contents of this folder and all will be ok?
edit to add....theres also a folder called RECYCLER which contains 3.3GB...can this be emptied too?
I am using Windows Seven ultimate x64 and I started having a problem when trying to access user's folder under documents and settings or users on any attached external hard drive on my computer. i didn't have this problem before, it started on the same installation of windows and without any changes to my system settings or user settings.
I am a computer tech and I use my computer to backup data before repairing computers so I attach the hard drive to my computer using a USB enclosure. This is limiting my work since I didn't find any solution yet. It's giving me the error below: "you don't currently have permission to access this folder" This is happening on any external hard drive I want to access the user's data.
A folder has disappeared from an external hard drive, as confirmed by plugging it into another computer and checking, searching for several filenames it should contain on all possible drives (with hidden files shown), and searches with Recuva and testdisk of deleted files. There is no discrepancy between the size of the remaining folders and the reported size of the folder that contained it along with the remaining folders.
The drive in question is a 2TB WD Mybook external that may be showing its age- another folder had a cyclic redundancy check error, and the folder in question developed one several weeks later. I'm making plans to move my data off and have already duplicated the most important files on it.When the folder developed the CRC error mentioned in the previous paragraph, I ran scandisk. It was after running that utility that I found it had disappeared, so that is the most likely reason. However, the other folder remained (with error unfixed, eventually resolved by using testdisk to copy the folder to another drive.)
Last week I've reinstalled my Windows 7 because my notebook was slow and I wanted to went back to the factory setting. I've picked my Seagate external HD (2TB) and moved everything I had into a folder called "[Acer]".
Well, I had some problems with external hard drives this year, I've lost many information from an external HD, and I found out that it was because I've connected this HD in a Macintosh. I really DON'T KNOW WHY, but every folder that I had opened in my Macintosh went CORRUPTED in Windows 7, with no chances to repair the files.
Since then, I haven't plugged my external hard drives into my Macintosh.
I don't know if it's a Windows 7 problem or a problem with my Seagate HD, but the quantity of issues that I had with this external HD since then was crazy. Every time I disconnected this HD and then connected again, Windows asked me to repair and scan the files. And the amount of time to scan everything was, like, one and a half hour... so it was bugging me a lot. But the real problem is: yesterday I've plugged my external HD and my backup folder (called "[Acer]" simply disappeared from the drive. I've tried to run "chkdsk E: /F", with no success.
Now I'm running a "chkdsk E: /R", and it will take me a lot of time, and I'm really not positive to recover my backup folder.
All the old folders are there, everything is fine, but this folder disappeared, only this folder (and everything that were inside of it) disappeared.
I've also tried Recuva (Recuva - Download) to recover my folder, but it haven't found it.
How do I make a folder on my External Hard Drive able to be accessed and useable, but also unable to be copied/moved/cut/deleted until I switch it back and how do I switch it back?
View 7 Replies View RelatedI have windows 7 on an AMD processor computer, it's a new computer with some upgrades. I'm trying to delete a folder on my external hard drive and it gives me this error message despite the fact that I am the administrator. You require permission from S-1-5-21-3908285926-3313324932-2694402914-1000 to make changes to this folder.
View 6 Replies View Related.I didn't wait for the computer to tell me it was ok to remove the drive in the usb port. Now my computer no longer recognizes the external drive After removing my external hard drive (without the ok) my computer no longer recognizes the external hard drive. What do I do.
View 1 Replies View RelatedI have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
View 3 Replies View RelatedMe and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
View 6 Replies View RelatedI have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
View 2 Replies View RelatedLow disk space, Can transfer data on D drive to an external hard drive
View 5 Replies View RelatedWell, I've been fiddling around through my settings and I'm wondering if there is a way to lock the Folder View? I heavily prefer the "tiles" format when viewing folders and I would like if there was a way to set that as a default viewing style for every/any folder (including new folders upon creation).
It's not too big of a deal to change it upon creating new folders but it'd add a bit more ease if I could lock it to that specific view.
I use the external for backup and I have a critical folder with a couple of years of backups that I can't open There is only one user defined for my Windows 7 PC and it has administrator privileges. I might have directly accessed the drive from a laptop that is part of my Workgroup.
View 7 Replies View RelatedI can see my external hard drive in device manager, but not in my comp
View 3 Replies View RelatedI recently replaced a Freeagent Pro with a Goflex Desk. Both the new and old drives were permanently assigned drive letter H and the new drive fitted in seamlessly about a week ago. The old drive is not used My Synctoy backups (run via Task Scheduler) all worked fine daily from 28th July until today when H was not found.I checked the properties and sharing was unchecked (not by any human hand!)The drive is permanently attached via USB.
View 2 Replies View RelatedI just got an external hard drive yesterday, and have been asking a few questions on this forum. So far, people have managed to be very helpful with the previous questions, hopefully someone can do so here too.Reinstalling all my games to external hard drive, need to know if they will / how to make them appear / function properly in my GEF, whether added automatically or manually.I am basically going to have EVERYTHING put onto my 1TB external, and by everything I mean "Music, Pictures, Videos, Documents, Games, and maybe Programs". So, I made a folder for each of those things on it,and only now that I am reinstalling my games into the Programs one have I realized something.I am a bit obsessive about having a fully functioning Game Explorer Folder (GEF) with all my games visible in it. It's my assumption that when I install into an external hard drive, none of those games will be automatically added into the GEF. However, if I add them in manually (using the regedit method in the tutorial), should everything function properly, so long as I have my external hard drive on whenever I use the computer?I just need this to be confirmed before I start reinstalling more. Also, if not, please let me know if there IS a way to get them to show up in my GEF properly, or possibly move the GEF to the external hard drive or get it to recognize things from a different directory.
View 6 Replies View RelatedIn order to make upgrading via a clean install easier -- and because I've been considering one for awhile anyway -- I'm looking at picking up a decent external hard drives right now... and can't seem to find a clear answer to something:
Will I see any drop off in quality of playback or computer performance if I use a drive like this (external, USB) to store all of my recorded videos. The tuner and Media center would save everything directly to this drive and play everything directly from it. Would that cause any problems at all? I notice that it requires no power adapter since it's USB powered, and it has a Interface Transfer Rate of 480 Mbps -- not sure how either of these apply to my potential use of it.
if I could use my external hard drive to install windows 7 on a new build with a new hard drive?
View 2 Replies View RelatedAttached an external sata hd with an esata connection. After power boot, external drive not recognized and also secondary internal sata hd not recognized.
Do I need to do something to the BIOS?Sinch stonooka has chosen the best answer to his/her question.Click here to view the answer that was selected.
My windows vista computer died. I have backed it up on and Iomega external hard drive but can't figure out how to restore the information to the new computer which is a windows 7.
View 12 Replies View RelatedWhenever I power up my computer, my external hard drive does not always come on line. I have to unplug and replug it for it to come on line.
View 1 Replies View RelatedI just got a new Packard bell go external hard drive which I used for a couple of days with no problem. btw it has never fell or had any physical damage. I plugged it one day into the PC and it couldn 't be detected in my computer. it shows up in devices and printers and also in disk management. I read on some forums to try and initialize it but it gives me an error saying cyclic redundancy check. I 've tried everything but still not working. this is a new hard drive which has never fell and no physical damage. and please don' t tell me to return it cos it was bought in another country. the only option right now is to fix it?
View 14 Replies View RelatedRunning Win 7 home, acer 1800.About a week ago I installed a Buffalo 1.5 TB external drive and automatic back up package, it was working very well, however it now shows as " Not Connected".I have replaced the usb lead but no change in status.It is also no showing up with other drives?Any one had this problem and found a fix?I did a search but found nothing quite like this.
View 2 Replies View RelatedI have a 2TB Seagate hard drive that keeps dropping out in Windows 7. I use it as my main backup drive and when writing to it using either of the two backup apps I use the drive usually "disconnects" and I have to switch it off and on again to use it.I've tried using a different USB port and a different USB cable - same thing. I have run Windows 7 error-checking checking which reports no errors.When it disconnects, device manager shows that it is still connected and working but it definitely doesn't work. For instance, I can double click and open it but it shows no folders. Switching it off and then on fixes this but only temporarily.
View 2 Replies View RelatedWhenever I try to eject a certain external hard drive using the little icon in the task window, I get a message that it is in use. I am very careful to be sure it is not in use but still get the message. This is a data storage disc. I am not aware of any programs on it that may be running in the background. Is there a way to examine a disc to see just what is being used on it at any given time?
View 9 Replies View Relatedafter plugging in the external hard drive after a while I get you need to format the disk in F:\ do you want to format?After a while throws another warning saying F: is not accessible, Data error (cyclic redundancy check)It was working well until last week but then suddenly started giving this error message.
View 1 Replies View RelatedI've recently spent 2 days indexing an external hard drive and now the index has appeared to have gone, for most of that drive.
1) if I index an external drive and remove, re boot, and re attach the drive, will the index still work for the external hard drive?
2) if the answer to question 1) is yes, why can I not search all but the most recent files on this re attached drive?
I'm trying to backup my data on my laptop to an external hard drive. Windows isn't recognizing it for some reason.
The laptop is an HP running windows 7 and the hard drive is an Eagle Cansus. Using the windows commands in the control panel don't seem to help.
I have been using a commercial company to back up my computer for the last 2 years. Now I have decided to do my own backups. I already did the first back up to the external drive. Now its time to back up again, when I back up again, will everything be backed up again? Or just the files that have changed?
View 1 Replies View Related