System Upgrade From 775 To 1366
Jun 10, 2009I'm about to upgrade my computer to an i7 system. Should I do another clean install of Windows 7 after the upgrade, or will Windows 7 do well at adapting to the new hardware?
View 6 Replies
ADVERTISEMENT
Upgrade For An Old System To Play BF3
Jan 12, 2012can't connect HP ScanJet 3300c to Toshiba Satellite L655.
View 5 Replies View RelatedUpgrade System To Window 7?
Feb 14, 2012I just Up-grade my System to Window 7... and My webcam is not drive.
View 3 Replies View RelatedUpgrade My System To Windows 7 Ultimate?
Jun 17, 2012i tried o upgrade my system to windows 7 ultimate but in doing so i wiped out all memory how can i get it back to factory settings without spending a fortune?
View 1 Replies View RelatedOperating System Upgrade From 64bit To 32bit?
Feb 18, 2011i have been having problems with my H.P windows 7 home premium 64bits. Some of my programs are not running smoothly, and my friends with 32bit are running the programs fine, so i was thinking of switching to 32bit, but when i try the 35 bit ultimate of windows 7 it giving me an error message, it there any way i can do it and is there any risk.
View 2 Replies View RelatedInstall Upgrade Onto A Pc With No Operating System Installed
Oct 26, 2009Can I install upgrade 7 Home Premium edition onto a pc with no operating system installed providing I have the disc that it upgrades from ie xp pro or home etc / anyone tried this ?
View 8 Replies View RelatedSystem Refuses To Boot After Memory Upgrade
May 4, 2012I've just tried to upgrade my PC's memory from 8GB to 16GB and have hit a rather worrying problem in that the PC now refuses to boot. Initially, once I'd replaced the old memory modules with the new ones, I got three beeps on power-up, which I quickly established was the result of my not properly seating the modules. Once I'd made sure they were firmly inserted I tried again, and this time all I get is the computer powering up - so all the lights come on and the fans kick into life - but then it powers down again without even attempting to boot: I don't even get to the BIOS. After a few tries I decided that it might be an issue with one or more of the new modules, so I swapped them back to the original 8GB kit and I still get the same problem. My PC is essentially DOA. Whilst I was inserting/re-inserting modules I did try to avoid and issues with static discharge. I wonder if perhaps I've disturbed a connector somewhere, although I couldn't see any signs of this when I re-opened the case to check.
The new modules are a 16GB Corsair Vengence DDR3 dual-channel 4-module kit (4x4GB). They were replacing a 4 module 8GB DDR3 dual-channel kit (4x2GB), so in both cases all four slots were in use. Motherboard is an Intel DP55WG, which is listed by Corsair as being compatable (16GB is the max for this motherboard). I've been running this system for two years prior to my upgrade attempt this evening, and it's been rock solid with no issues.
Maybe I should reset the CMOS for instance? Note that I'm not a hardware guy, and messing around inside the case isn't something I normally even consider trying... But I thought that this would be a very simple, trouble-free upgrade!
In System Upgrade Won't Run, Report It Can Not Install 64 Bit On 32bit?
Oct 6, 2011In system upgrade won't run, it report it can not install 64 bit on 32bit and vice versa.I know 100% it is a Windows 7 pro x64 version and computer properties also claims this.The history is that a week ago I notice most updates has fails since 17 june 2011,But now I get notificed! I tryed to download these MS update fixes, I tried to clean update history etc. But update keeps failing. I read Binck turial 3413 about using in system upgrade to repair, I have the original install DVD. But the upgrade reports I cannot install 64 bit on 32 bit and vice versa, actually both message in the x64 try.I tryed disable all non MS services using msconfig including my NOD32 antivirus doing the in system upgrade. I have loads of programs it will take many hours to reinstall and configur all programs to put data on a separate partion as I require.
View 3 Replies View RelatedPutting Win 7 Upgrade Version On New System Build
Nov 22, 2009I just got my computer up and running today. My next step is to install win 7 on it. So i got win 7 pro 64 bit through digital river with a sweet student discount and also a back up disc that came in the mail. I have noticed that it says upgrade on it though. I have been hearing and being told so many different things that i can not tell what is true.
Please only post an answer if you are certain it is correct
Thank you and with that being said here are my questions
Questions:
Could someone please explain to me what i am exactly supposed to do with the backup disc?
Can i use this on a new computer, ie one without any os on it already?
A friend referred me to this site. It sounds very confusing and i am not very tech savvy when it comes to things like this. Will i need to install it onto a different computer in order to do this boot-able upgrade? does the back up disc come into play? Could someone please explain the instructions in a very simplistic way.
http://www.notebooks.com/2009/10/22/how-to-make-the-student-discounted-windows-7-upgrade-bootable/
Any other ideas or solutions to getting win7 upgrade version onto a new system build?
System Shows 64 Bit On Windows 7 Pro And 32 Bit On Vista After Upgrade
Jan 22, 2012I had windows vista 32 bit earlier. Then I got windows 7 professional upgrade in trial period. I didn't notice how it happened. Of course it must be my mistake. Now when i boot from windows 7 it shows 64 bit and in vista it shows 32 bit. The system asks before booting which one to choose. It's today only that I have installed but I am not facing any problem as such except that i need a product key within 30 days. Should i leave as it is or uninstall vista somehow. Would i be able to reboot my system using the 32 bit vista CD?
View 1 Replies View RelatedUpgrade Entire System But Not Reinstall Windows 7?
May 4, 2012want to upgrade pretty much my entire system except for my video card and my hard drives, mouse and keyboard. I read somewhere that someone did this, they booted into safe mode, removed all the drivers, upgraded and windows loaded fine, and operated fine.
View 6 Replies View RelatedWindows Fails To Load After System Upgrade?
Dec 4, 2012Old office computer:
Dell E510
P4 3.4 GHz
4 GB RAM
Radeon x800 PCIE
Crucial M4 SSD 120 GB
Windows 7 x64
New internals:
CPU: AMD A4 5300
Mainboard: MSI FM2-A75MA-E35 FM2
8 GB RAM
Corsair 450 watt PSU
Cheap Cooler Master Case
After assembling the new computer, I ran it without the system disk installed to make sure everything was kosher, and memory timings, etc. were correct. After verifying that, I shut it down and put the SSD into the new unit and booted it up. The system posts fine, but once the Win 7 startup image shows, the system restarts and brings me to the "start windows in safe mode/start windows normally" prompt.
System Requirements For Windows 7 Ultimate 64bit Upgrade
Apr 5, 2011So I am planning to upgrade into Windows 7 Ultimate 64bit. I just wanna know what are the system requirements for it? at the moment I have Windows 7 32bit Home Premium, 2GB RAM, and Pentium (R) Dual-Core CPU 2.60 GHz (going to upgrade the CPU soon.)
View 9 Replies View RelatedInstall P2P Driver And Do Upgrade - System Cannot Be Repaired Automatically
Nov 26, 2012I recently bought a dell latitude E6410 laptop running windows 7 ultimate. A few days ago it started playing up, at first I thought I had a virus of some sort as my protection had run out, so I downloaded another protection plan and ran a test which came back clean. Then a message came up up from windows saying that I needed to install a "P2P driver" and do a upgrade. So I downloaded the driver and did the upgrade which seemed to work. The next day I started up and it went straight to the start up repair, which came back saying my system cant be repaired automatically. I can get as far as the system recovery options. I tried a "system restore" and that didn't work, and a "windows memory diagnostic" and still nothing. I haven't done a back up disc or have any other discs so I'm pretty much stuck in a loop now. I've been looking into the "system image recovery" but have no idea what that means or what to do.
View 4 Replies View RelatedAfter Windows 7 Upgrade, System Goes To Blank Screen (Vaio Laptop)?
Feb 18, 2012An upgrade installed and now the system hangs (could be something else, I don't know, but upgrade installed right before hang)Vaio logo comes up, then repair or start Windows regularly - If start regularly, goes to blank screenIf repair, then the sytem goes to Startup Repair and Searches for problems for hours.Repair, and login as owner, go to system restore, choose a restore point, and click next, system hangs. Don't have a system image or a good backup (My backups always hung.Will make sure I have one from now on)Had memory checked. Did not change, blank screensafe mode hangs on black screen, low res video hangsUsing Windows 7 installation disc (borrowed from a friend), the repair option hangs on "Searching for Windows Installations..." and on the other window, I can see it found my windows installation but I can't get to it, because the "Searching for Windows Installtions..." never stops.
View 1 Replies View RelatedAsus EEEPC With No System Disc - Hard Drive Upgrade
Jul 9, 2012I want to format and 0 write and wipe the entire hard drive in an Asus EEEPC with no system disc and re-install windows 7 home premium. The windows registration number is on the back of the computer.
Did not come with a windows disc or recovery disc from the factory, IE windows 7 home pro was pre-installed.
I created a system recover boot disc/CD. This machine has no CD/DVD drive, but I do have a USB CD/DVD drive.
If I format and write the drive, but leave the partitions will I be able to re-install this version of windows that came with the machine ??
Ultimate Family Tree Compatibility Upgrade To 64 Byte System?
Nov 3, 2012Ultimate family tree compatibility upgrade to 64 bite systemhow dies it work?
View 1 Replies View RelatedWindows Explorer Crashes And System Freezing After Video Card Upgrade?
May 24, 2011I very recently graduated and as a congratulations, my brother-in-law gave me a brand new Nvidia 9800GTX for my computer. I was running Windows 7 Professional 64-bit when I installed it and I immediately saw a drastic increase in performance. However, when I turned my computer off for the night, I noticed that it would hang at the shut down screen and never actually turn off.Refusing to believe that the new card was at fault, and having next to nothing on my C partition after my most recent formatting, I decided to go ahead and reinstall Windows to hopefully fix the issue. This is where my other problems started in. Suddenly Windows Explorer was crashing whenever I tried to use my disk drive and my system would randomly lock up. After assuming my install went wrong, I tried reinstalling twice more and neither worked.Finally, I got fed up and reinstalled my 32-bit copy of Windows 7 Professional and it still didn't work. As of now I've removed the new card and put my old 9500GT back in to find that I'm not having a single problem with the 9500.
View 6 Replies View RelatedSystem Goes To Black Screen Before Login/welcome Screen After Windows 7 32-bit Upgrade?
Sep 2, 2012My son has a Toshiba Satelite P205 that he just upgraded from Windows XP Home Premium to Windows 7 32-bit. After the upgrade completed the computer booted fine. The within 20 minutes he got the BSOD and the system rebooted. Now he can't get Windows to fully start. We've tried all of the options from F8 with no success. We have the Toshiba System Recovery Disk but it won't launch. (The Boot sequence has been changed to boot from CD/DVD and then the Hard Drive.)The Memory Diagnostic from the Windows 7 disk ran fine with no errors. I'm thinking I might need to re-format/wipe the drive to start fresh but don't know where to obtain a boot CD(no floppy drive on this laptop). Does anyone recommend a software that I can purchase to clear everything without destroying the CD/DVD accessibility so I can then use the System Recovery Disk to put it back to the original factory Settings?
View 1 Replies View RelatedUpgrade Path Problem - Win 7 RC To Vista To Win7 Upgrade
Nov 13, 2009I installed Win 7 RC on a new build and purchased Vista Home Premium 64bit OEM with upgrade to Win 7 Home premium. The Win 7 upgrade disc has arrived. I understand that Vista must be installed and activated for the upgrade to work. Attempts to install Vista with Win 7 RC running or booting from the Vista disc lead to error code 0x80070103, insufficient free space. My HDD has > 450 Gb free space in 2 partitions. Do I need to reformat the HDD in order to install Vista over Win 7?
View 9 Replies View RelatedUpgrade From Vista 32-bit To Windows 7 64-bit With The Upgrade Disk?
Aug 7, 2009I ordered the 50$ Windows 7 upgrade disk. I realize that Windows 7 will need vista or XP already installed for the upgrade version of Windows 7. But if I want to upgrade my Vista 32-bit to Windows 7 64-bit, Will I be able to do it with this upgrade disk? after all I will need a fresh install (because 32 to 64) and this is the upgrade version...
View 9 Replies View RelatedContinue The Upgrade / Merging Upgrade Process
Nov 30, 2009Customer dropped off a laptop telling me that his Windows upgrade had failed.
It's a new HP DV6 that had Vista pre-installed on it.
I've taken a look at it, and there's a "Windows.old" folder on the root of C:, which is of course a back up of all his data.
There's also a batch file inside the folder with the following inside of it:
"REM Dummy file for NTVDM"
I'm wondering if there's a way to "continue" the upgrade / merging process? He has asked me to re-install all of his software the way he had it. So i'm hoping there's an easier way to continue where he left off.
I know Windows 7 creates a "Windows.old" folder when upgrading from XP. Not sure why one was created for a Vista to Windows 7 upgrade though.
Revoting Previous Upgrade To Upgrade To Windows 7?
Dec 24, 2012I have a pc with Windows XP pro 32bit retail version. First I have made an image, just in case. Then I have upgraded it to windows 8, 64bit by using the retail upgrade DVD and clean install. However, I found out that my motherboard is so old (5 years old) that there are no drivers for win8 and after asking ASUS they said that the motherboard is not supported any more and that there will be no new drivers for it. I tried using win7 drivers but it did not work and without correct drivers a lot of things does not work (in particularly hdmi port).What I want to do now is to revert to my image (windows xp), buy a Windows 7, 64bit upgrade retail DVD and upgrade windows xp to windows 7 for which there are drivers for my motherboard.
1) Can I use windows xp retail (whose product key has already been used to upgrade to win8) image to upgrade to windows 7 retail? will the activation of windows 7 succeed? I want to use clean install again since i upgrade from 32bit to 64bit
2) If the answer to question 1 is a yes, how does microsoft prevent users from using the same windows image file to upgrade different pc's? I mean, theoretically, I can make an image of pc1, copy it to a hard drive of pc2 (even if it will result in erroneous installation due to different specs) and upgrade both systems by using two VUP product keys which are cheaper than one VUP + one retail product keys
3) Can I use windows 8 upgrade DVD which is not used any more to upgrade another PC?
Upgrade Key - Use The Upgrade Anytime Through Windows
Feb 27, 2010I purchased Windows 7 Professional through the Ultimate Steal.
Downloaded it, put it on a disk also.
It will go through the start of the setup and copy files etc, and then it will give an error and say to install from a current version of windows I need to use the upgrade anytim through windows.
But when I go to upgrade anytime it asks for an upgrade key, but all I have with the purchase was a product key and it says that I can't use the product key.
any help?
edit: also i have windows 7 home premium installed right now
and here is exactly what it says:
"To upgrade from one edition of Windows 7 to another edition of Windows 7, use Windows Anytime Upgrade. Cancel the upgrade, open the Start menu, and search for Windows Anytime Upgrade. "
Use The Windows 7 Professional Student Upgrade To Upgrade From Windows 7 Home Premium?
Aug 26, 2011can i use the windows 7 professional student upgrade to upgrade from windows 7 home premium?
View 4 Replies View RelatedCan Win7 Upgrade Upgrade Win 7 RC?
Jul 7, 2009If I bought Windows 7 Upgrade for 49.99... could I use it to upgrade windows 7 RC instead of vista or XP assuming it even supports XP.
View 5 Replies View RelatedUsing An Upgrade Key With Anytime Upgrade
Oct 27, 2009I have Windows 7 Home Premium installed on my my machine, but is is not activated yet. I will be getting a Windows 7 Professional key from the student offer, and I would like to use that. Is it possible to use that key in Anytime upgrade?
View 7 Replies View RelatedWindows 7 Upgrade Or Not Upgrade?
Mar 20, 2010I'm considering whether to upgrade from Windows XP to Windows 7. IMHO, the new OS seems to be not sufficiently "mature" yet, and it is better to wait for the first service pack to come out before actually upgrading.
View 9 Replies View RelatedDell XPS Crashes .System Repair,system Restore ,safe Mode Don't Work
Mar 8, 2012I am having the following system configuration
XPS L401X Base
Genuine Windows(R) 7 Home Premium 64bit (English)
Intel(R) Core(TM) i7-740QM Processor
6GB 1333MHz DDR3 SDRAM (1 x 2GB + 1 x 4GB)
640GB 7200RPM Hard Drive
Lately whenever i try to start my computer it pass the Dell Bios and then directly goes to the screen which states
Repair your system or Start windows normally When i chose repair system , it start downloading windows files and then launch the windows , but hung up at the sky blue login window with only movable cusor . When i choose to start windows normally it gives me BSOD momentarly ( hard to see the message) and then restarts again . i tried with the advanced boot up options like
repair my computer , all safe modes , restore to last good configuration but it does the same and hangs at windows loging sky blue window .I Tried to run the Dell PSA+ Diagnostic and it returns with 2000-0146 error . As per the Dell online solutions for this type of error ,I tried to reinstall the Hard disk but the problem still exist.
Windows 7 Won't Boot - No Operating System Listed / System Partition Not Valid
Oct 19, 2011Suddenly my Win 7 Home Premium x64 will not boot. The system starts, POSTs then loads the DVD driver, then the screen goes black (not blank but "lit up" black if that makes sense). Then nothing. If I use Hiren's boot cd I can boot up using the "boot from HDD" option fine and Windows operates normally. System restore to a previous configuration made no difference to the original problem. I cannot boot into Safe Mode. F8 just offers me boot order options.
- Running the Windows 7 DVD I find: "No operating system is listed on the Repair Windows option."
- Running Startup Repair finds the following error: "the partition table does not have a valid system partition" which it claims to have repaired, but the error remains and Windows will still not boot.
I followed this advice:
Boot 7 dvd to system recovery options command prompt. Type: Diskpart
list vol (find the vol letter e.g C or partition number e.g. 1 for the system partition )
Sel vol C ( or sel vol 1, obviously use the correct letter or number)
act exi
My system partition was easily identified and listed as healthy so I selected it and made it active. The problem still remains exactly the same. My system is self built just over a year ago, to my knowledge has been running fine, without any hardware issues. I'm prepared to do a clean install if that's what it takes but if there is a way to fix the partition problem without that I'd like to explore it first.
Missing Operating System" Error Massage When System Starts?
Feb 18, 2012"Missing operating system" massage is coming when i start my system and i am not able to start. I think because , i had given "mark partition as active" option for one hard dive (E) in disk management when last time i opened. it did not have any data. i did not know, this will make any problem. Now i am not able to boot windows re installation dvd also. i can only take BIOS settings.
View 6 Replies View Related