Sony Optiarc AD7261S OEM Drive Failed After Erroneous Flash To V1.03?
Jul 31, 2012
Thought I was doing something good and proper, and I did know it was an OEM, and I did see the warning on the Sony website (I'm a dunce, I know; I just didn't think...didn't think...) to not flash an OEM drive with their firmware, but I did anyways.I'm wondcering if there's any way I can trick the drive into working again.I've downloaded all the legacy firmware I could find and am contemplating just trying all of them in succession just because I don't seem to have anything to lose at this point. But wondering if anyone has any better ideas.
When I tried to burn images to disk earlier today using FreeStudio Free Disk Burner my DVD RW drive started making strange pulsating griding noises. Now it can't read disks. It can open and close by pressing the button and by via windows too but can't read or write any more.
I did a clean install of windows 7 ultimate 64 bit and everything seems to be fine except that in windows explorer it is showing an extra CD-Rom drive that I don't have.
i tried uninstalling both of my dvd burners (1 ide & 1 sata) and that didn't solve anything.
the drive doesn't show up in computer management/storage/disk management.
i guess this isn't really hurting anything but it is very weird and i'd like to get rid of it as it is rather confusing.
A few months ago I've been having issues with attempting to install Flash Player and QuickTime. I'm currently using Firefox 7.0 and Internet Explorer 8 as a backup browser. In Firefox, the installation works, but whenever I restart the computer, it requires another installation. Whenever I attempt an IE installation, I get the "failed to register" message, citing problems with the ActiveX control. Prior to all this, I hadn't any problems with either browser's handling the Flash Player.I've tried several corrective methods online, but nothing seems to fix the problem.I've also had issues with QuickTime installs; install attempts have been met with the "Error 46: Could not load or find the QuickTime ActiveX control" message.The ActiveX control seems to be the culprit in both cases and I'm beginning to suspect it might be a registry problem, but I'm not sure
How can you copy one flash drive to another flash drive,on the same computer?
Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit Processor: AMD Athlon(tm) II X4 630 Processor, AMD64 Family 16 Model 5 Stepping 2 Processor Count: 4 RAM: 3839 Mb Graphics Card: ATI Radeon HD 4200, 256 Mb Hard Drives: C: Total - 702932 MB, Free - 657555 MB; D: Total - 12368 MB, Free - 1523 MB; Motherboard: FOXCONN, 2AB1 Antivirus: Norton 360, Updated and Enabled
I went to re-install my phones Firmware today, had to install the Update Service. That went fine, loaded up the Update Service and tried to connect my phone, this is where the problem came up.
Turns out Windows doesn't have a driver for the SEMC flash on the phone (the bit with the firmware on it). Any Suggestions?
Disk read error ctrl+alt+dlt to restart your system.
1. Have sony vaio E-series vpcea23en 2. Fail to load windows 7 3. Even recovery dvd stop to load 4. No option in bios to run diagnostics. 5. Try to install windows 7 64bit clean install but also failed to load it. 6. Have no money for new hdd. 7. How can I format my laptop. full
Before I even go further: yes, the "hide empty drives" has been unchecked)I had to reinstall my machine and I was able to to see the drive letters for the internal flash card reader. However I think something might have gone wrong when I give my external HDD a drive letter that was held by one of the flash card reader).I wrote "I think" because I am not really sure since I never wanted to use the internal card reader till today so I never noticed there was an issue. Anyway, the internal card reader does not show up even when I insert a card in the reader. Basically nothing happens. I have uninstalled the "USB Mass storage device" and it gets installed without any issue but the problem is still there: I can't see the reader. the INTERNAL flash card reader has a USB slot and when I insert a EXTERNAL flash drive, the EXTERNAL flash drive shows up.
I know, should have a backup, I was actually about to create a backup when the flash drive failed on me unfortunately. My newest backup is from about 5 days ago, so I'd prefer to be able to restore the current files.
I moved the drive over to another computer and tried to save a file but when I checked again the file was gone, like it never saved at all. Subsequently, after removing and plugging it back in the computer did not detect the drive (or see it in disc management). It does show up as a generic USB drive in the device manager, but there are no properties for it.
When I add it to a computer, it still adds drivers for it, but then nothing happens after that. It may also be a hardware problem, since the drive fell on the ground pretty hard a while back, but seemed to be working fine. There isn't an easy way to open it up and check.
I also tried using a few data recovery programs, but they couldn't detect the drive either.
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
I recently ran into a very weird windows 7 bit problem after installing it on my desktop. I cannot copy large files/ holders into usb flash drive or write large files to cd/ dvd. The copying/ moving process would stay on for about 5-10 seconds then freezes then I get an error message. That is:
H: refers to a location that is unavailable. it could be on a hard drive on this computer...
I have all the latest drivers.
And windows/ nero 9 can't use my dvd drive to burn files.
Some info about my system: AMD X4 630 CPU. MSI KA780G (AMD 780G chipset) mobo. I have 2 sata hdds, non raid mode. The DVD drive is IDE. 4gb ram ddr2 ram. windows 7 64 bit.
When I put a flash USB drive in my Windows 7 machine it gives a beep and tells me that the drivers have been loaded and the drive is ready for use.But I can't see it anywhere, it shows in 'Devices and Printers' but won't open from there.How do I get it to show up when I open 'Computer' from the Start button please.Tech Suppot Guy System Info Utility version 1.0.0.1OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 32 bitProcessor: AMD Phenom(tm) 9950 Quad-Core Processor, x64 Family 16 Model 2 Stepping 3Processor Count: 4RAM: 3583 MbGraphics Card: ATI Radeon HD 3600 Series, 512 MbHard Drives: C: Total - 305141 MB, Free - 183571 MB; E: Total - 953867 MB, Free - 669909 MB; Motherboard: ASRock, N68C-S UCC,,Antivirus: Microsoft Security Essentials, Updated and Enabled
I have a staples relay flash drive on my dell latitude E-6500 I have down loaded info on it and when I try to recover the info i get no message or icon to tell me it is working I bought it 2 months ago could you tell me what the steps are to use it?
I have a problem with my DVD drive. When a DVD begins to burn I get an error, "Burn Process Failed". There is no firmware upgrade for my DVD player, what is the cause.
I am using Windows 7 RC and I try to encrypt 500 GB external drive. There was a power failure when the process was 30% completed. When I try to access to the drive it says.BitLocker drive encryption failed to recover from an abruptly terminated conversion.This could be due to either all conversion logs being corrupted or the media being write-protected.The password is right because when I type a different password I see message.The password you typed is not correct.
Downloaded MP3 Rocket from Cnet but requires a flash player 11. Downloaded it but kept getting a mesage: "A newer version already installed" which is not true. Tried to install an older version but Adobe won't let me install it as it says there is a new version of it.By the way, I had Adobe Flash Player before and it worked!
I just purchased a new USB 256 GB flash drive to transfer documents from my desktop to the flash drive after the process completed I rebooted the computer when I opened my computer the flash drive was showing invalid characters when I opened a flash drive document they also had invalid characters labeled to them and I get the following error " The filename, directory name, or volume label syntax is incorrect."
I unfortunately forgot my windows 7 password of my netbook. However, I was able to find this bootable iso image that removes and windows password. it works great when burnt on a cd and booted from bios but as u know netbooks dun have cd drives. so my qeustion is is there a way to burn the iso image to a usb flash drive from which i can boot from it?
I tried to install Malwarebytes Anti-Malware on a flash drive to be able to run it on another computer but I get an error message. It appears that the data file containing the list of possible infections was installed on my C: drive. Is it possible to run this program on another computer from a flash drive? The error I receive is 'Run time error 13...Type mismatch'.
How do I download a file from a flashdrive to Windows 7? I did this once before with no problem, but for some reason was unable to correctly do it today.
Is there a way I can partition my USB flash drive without any third party tools? And, is there any way I can use an autorun.inf file in Windows 7? It works fine in XP and Vista but what about windows 7? I have a batch file on it where it will run silently and take a users documents and transfer the files to the USB.
If I plug my flash drive into my PC using Windows XP, it works fine.No problems.But when I plug it into my laptop, using Windows 7 it will not load it.It says newhardware detected, installing new hardware, Hardware installation failed.If I go Device Manager, It is listed under Unknown Devices.I have tried to uninstall all the USB Root Hubs, Restart the computer, in-order for it to auto re-install with the USB in / out of the computer. But it still fails.
about my a4tech pocket usb when i plugged it to my toshiba satellite e1802 it read as generic usb but when i plugged my usb flash drive it doesnt read by my a4tech pocket usb hub.
I know that this question is not associated with this topic but i need help.Ive typed in following command in command prompt bootsect /nt60 and my flash drive is not readable any more...is there any command to reverse mentioned command?I was trying to make bootable usb drive and now i cant access my usb flash anymore and i had some important files on that flash.
I have never needed to do this before, so I have no knowledge on the subject. I have a user who will be taking data home once a week, so I want to encrypt or at least password-protect her flash drive. It will contain regular, typical Office documents.Now, the tricky part is, she has a Dell PC running Windows 7 Pro in the office, and a Macbook laptop at home (not running any version of Windows). Does something exist, especially free, that will allow me protect her flash drive, and make it accessible to her on either computer?I need to do this for now, temporarily. I'm trying to convince my CEO that DropBox and others are just as safe and roughly the same process....but for now, I have to make the flash drive work.
I installed the Chrome OS IMG file on my flash drive and tried to boot from it, but it turns out my flash drive is now un-recognizable. I tried assigning a different drive letter in computer management, but it doesn't show up there. Sometimes it will show up and Windows will say that I need to format it, but the format always fails.Other flash drives are recognized by my computer. I am using a Lexar Jump Drive, but I'm not sure what model it is.
explicitly creating bad sectors in a flash drive. Is making bad sectors possible by repeadly disconnecting flash drive during file write process? How can a flash drive develop bad sectors in its memory ?
Have a Sandisk 32 GB USB Flash Drive that I use for selective storage of certain files.If I purchase a Sandisk 64 GB to make a complete backup will I have to configure each one every time I swop usage.Why I ask this is that when I tried to introduce the new Sandisk to my laptop it could not be recognised as my computer was still configured to my old Verbatim 4 GB USB.
