I just got a new Windows 7 machine. It is networked to my older Win XP machines and it's able to access the files on the XP machines, but I'm unable to access the Win 7 files from my XP machines.
View 1 RepliesI have Windows Seven 7600 and i'm trying to share files with a XP SP2 machine!
Problems:
-XP machine can see Seven machine but can't access shared folders!
-Seven machine can see XP machine but when i'm trying to see shared folders it gives me an error(see on screenshot)
-Network map doesn't work(see screenshot)
-Both machines have same workgroup MSHOME but when i go to homegroup it says there is no people in the homegroup!(see on screenshots)
Other info:
Before i couldn't turn network discovery on,every time i was set it to on he was going to off so I searched on this forum(great forum) and finally i was able to turn it on,maybe others have this problem so there what i did:i go to start=>run=>services.msc and i turned on(also i switched them to automatic startup) these services DNS Client, Function Discovery Resource Publication, SSDP Discovery, and UPnP Device Host services.
IPv6 currently is enabled!
well i'm try to copy files from my xp machine to my win 7 machine i can see the xp machine but i get a message that says "make sure that the xp machine allow incoming connections for file sharing" and i have done just that i think but its a no go i've just about everything.
View 1 Replies View RelatedI have gone through my Network and Sharing Center in Windows 7RC and turned everything on except Password Protected Sharing. I have joined both Windows 7 and Xp machines into WORKGROUP. I can access my Public folder and my shared printer from my Windows 7 machine on my XP machine. I'm trying to share my Mp3 folder, thats on a secondary HDD in my Windows 7 machine.
Path being "E:StuffMp3z". No matter what I change as far as permissions, adding HomeGroupuser to the Advanced Sharing dialog...everything I've tried, my XP machine can see the share, but I get the ".......is not accessable. You may not have permissions...." error in XP trying to open the shared folder. And what's up with not having a folder icon with a Share symbol in Windows 7 so by looking in Explorer you can tell a folder is shared?
I recently obtained a newer Windows 7 Home Premium x64 machine (custom build) after my Windows XP Pro x32 machine (also custom) bit the dust. Now I'm using my old "C-drive" HD as an external HD. I want to access my old folders (very important stuff) but they are in green text. I've read that this means they are encrypted, which I never did intentionally. How do I access them now? I get a msg that I need permissions that I don't have. I've tried to grant my admin acct with "Full" permissions, but still can't access these folders.
View 7 Replies View Relatedwin 7 home pre x64, problem: kmplayer.Laptop, 2 user accounts, one is admin, another is "standard" user.I installed KMplayer, the admin account can use it no problem, but the standard user is not able to use it. Moreover, the KMplayer does Not show up in the "start" -> "program".
View 2 Replies View RelatedI am trying to share folders on my deskop with my laptop, but I need something that will allow me to edit photos in lightroom on my laptop that are stored on my desktop via Lightroom. Thought that maybe windows 7 "homegroup" feature might allow me to do this, but when I try and setup a homegroup on my desktop it says "Cannot create a homegroup on this computer"Accessing my desktop via logmein.com, to try and set this up. My desktop is currently several miles away, and I need to access those files. I read something about deleting a file in /peernetworking/idstore.sst - Deleted it and rebooted, still get the same error.
View 2 Replies View RelatedI am trying to connect my Windows 7 laptop with a computer running Windows NT Server 4.0 through a 8 port hub using network cables for file sharing. I changed the IP address, subnet mask of my laptop to suit the IP address of the NT machine and could ping the computer from laptop and vice-versa. But when I try doing 'Run' -> \(IP address of computer with NT) it asks me enter a Network password and it does not accept any User id or password. I tried various solutions going through various forums like
1. Truning the firewall off
2. NetBIOS over TCP/IP enabled
3. Creating a user account in the computer with NT with a same user id as the one on laptop with Windows 7
4. Logging in both the systems as administrator and without a password.
I have 3 computers. Computer A is a desktop runing Windows 7 Professional. Computer B is a desktop running Windows 7 Home Premium. Computer C is a laptop running Windows 7 Home Premium. FIOS is connected to Computer A. A Network of all 3 computers and a Homegroup have been set up from Computer A.We use Office 2010, mostly Word 2010 for our word processing tasks.I realize that with a Homegroup, you can create a Word 2010 document on Computer A, save it to the default location (Libraries/Documents), then open that document on Computer B, make changes to it, save it to the default location, and then open that same document on Computer A, which will show the saved changes made on Computer B.I would like to know if a Word 2010 document can be created on Computer A, then be saved to a specific folder - not a default saving location - on Computer B, so that the user on Computer B can modify the document, save it to a specific folder - not the default saving location - so that the user on Computer A can open the document from its specific folder and view the saved changes.Would this involve advanced sharing, or permissions, or some type of change on the network?
View 2 Replies View RelatedI found it somewhat difficult to completely Unshare files and folders on my HomeGroup Network and still allow Printer sharing in Windows 7 (Home Premium).
Initial UnSharing still allowed files like those below to be viewed on other home network computers:
C:/Users/
{user x} (folder)
AppData (folder)
Default (folder
Public (folder)
desktop.ini (file)
Other computers on the home network could step through many levels of hiarchy in the AppData folder and appeared to have "Delete" access!!
To completely decouple the computers, I had to go through the following several different Sharing/Unsharing assignment locations, till I could completely break the linkage.
I would appreciate any clarifications or simplifications.
File UnShare Confusion on HomeGroup Network
There are several different Network Sharing/Protection assignment locations in Windows 7.
To prevent all sharing between computers on the Homegroup Network, but allow Printer Sharing:
1) Start->Control Panel ->Network and Sharing Center->Choose Homegroup and sharing options.
Uncheck sharing boxes that you don’t want to share. Save changes.
2) Start->Control Panel ->Network and Sharing Center->Choose Homegroup and sharing options->Change advanced sharing settings.
Click “Turn off Public folder sharing (people logged on to this computer can still access these folders)”.
3) Start->Control Panel ->Network and Sharing Center->Choose Homegroup and sharing options->Change advanced sharing settings.
Choose Media streaming options.
Click “Block All” button. Turn off. Click OK.
Anomaly Note: You have to close Control Panel and repeat all step 3 again for the change to take effect.
4) Open Windows Explorer.
a) Select “C:/”, select “Users” folder with single click, then click “Share with” in toolbar.
b) Select Advanced sharing.
Under Sharing tab, select Advanced Sharing. Uncheck box labeled “Share this folder”. Apply and close.
5) Open Windows Explorer.
Select “C:/Users/”, select all folders and files under "Users", then click “Share with” in toolbar, then click “Nobody”.
6) Verify success by going to other home network computer(s) and trying to access your files and folders. You should only be able to see there is a computer and not be able to see any folders of files.
I have main PC [office_PC]. On that PC is basically everything. music, pics, videos etc. It is the primary computer but I also have a laptop and a tablet that access that data too. I need/want full access to everything on the office-PC read/write. no problem easily done and I have had no issues currently until today. (64 bit win 7 system)
My daughter saved up and purchased a netbook [Morgan-Netbook] (OS:win 7 starter). I got her on the network and when connected it asked about homegroup so I said yes and now I see her and she sees me. BUT she has full read/write access to everything on the PC. I can access everything I would expect via the homegroup but then under the "network" icon I can see all my shared folders and she has way more access.
I would like her to have read access to pics, videos and specific folders but not necessarily everything else. I have tried adding her as a user in the sharing permissions but my Office PC only wants to see Location as "office-PC" so I cannot choose her from a list to restrict her access specifically. If I limit the access globally then I lose it for me as well. How do I limit access to just her so that she can see the folders we want but she only has READ access?
I have windows 7 pro on two computers, how do I access complete network drives without sharing individual folders and and using passwords, I hate using passwords, and I don't have anything on my computers worth protecting, I wish windows 7 would just let me turn off all that security crap. I never had a problem with XP.
View 1 Replies View Relatedi have Lan, all computers are windows 7 proffisional and one machine is windows 2003 , workgroup . i made shared folder in windows2003 , some computers can access the shared folder and others can not.when i open network , i see the 2003 computer, when i try to access it , it asked for user name and password. the user is administrator for all , when i enter the user and password from many computers in the lan it is work correctly but in one machine with the same settings its says , you have no permession to access this computer.
View 3 Replies View RelatedI have de-commissioned an older machine that I had installed W7 on, I wish to install the W7 from this machine to another, is this possible -if so how?I think I have read somewhere, that once W7 is installed on a machine - it can NEVER be used on any other machine, is this correct?
View 1 Replies View RelatedI replaced an XP machine with a Win7 machine. When I VPN into our 10 network I can't get to any 192.168 addresses. The XP machine works fine only the Win7 doesn't. I looked at a lot of settings but I can't find anything out of sorts.
View 3 Replies View Relatedive got 2 computers hooked up to a router by Ethernet sharing an internet connection, the internet connection works fine for both computers. i would like to share documents also between the computers
-one is a windows xp 32
-one is a windows 7 64
ive set up many networks in the past with a bunch of xp machines without any trouble but now i am having trouble my first step was on the windows 7 machine, i went to control panel -> network and sharing center -> setup a connection or network -> set up a new network this is where i believe i am making a mistake of some kind, it seems that the windows 7 machine is assuming that i want to set up the network wirelessly, when it is connected to the router via Ethernet. it simply brings me to a screen that says choose the wireless router or access point you want to configure, and hangs there with a greyed out next button everything seems to be going fine on the xp machine, i created a new network called "share bear", told it that the computer connects through a residential gateway, enabled file and printer sharing, rebooted the machine, and confirmed that there was a new folder in the network places for shared documents..i went back to the windows 7 machine where it was still hanging, rebooted it, looked for the new network in network and sharing center and it wasn't there, i tried again to "set up a new network" on the windows 7 machine with the same hanging screen
I have a small network of six computers. Five of them run XP and I just added a Windows 7 machine. I've got a Microsoft Access 2003 database that all of the computers share that is hosted on one of the XP machines. The Windows 7 machine can access the Access database through the network just fine, as long as no one else is accessing it. However, if someone else on an XP machine on the network is using the file, it won't open on the Windows 7 machine. Doubling clicking the file on Windows 7 gives me the circling blue icon for a second or two, then nothing happens. If the XP user exits the database, then I can open it fine. Permissions on the XP that is hosting the database is set to allow everyone. And all the XP machines can access it at the same time.
View 9 Replies View RelatedInstalling W7 using an old HDD on an old machine to install W7 on a new SSD to be used on a new machine.I'm currently using this old machine from '09 and its performance levels have died down a lot. I bought all the components to build a new machine except I didn't want to spend extra money on another HDD to install the OS on my new 180GB Intel SSD. So basically, I want to use the HDD from my old computer, install W7 onto the SSD, then transfer the drive to my new computer, and use it on the machine and just reinstall all my other files.
View 5 Replies View Relatedi use BitLord to download random stuff anyways the Downloads Folder Shows up like this : Now when i open Nero up it shows this Weird thing is if i hover over the folder from normal window it says the Downloads folder is only 800mb (as it is only showing me one item) yet from Nero it says the folder is over 9 Gigs. Im set as Owner of the folder and i have all permissions set for me however i am still unable to see these files outside of nero and i don't know why.When i go and try to change the permissions on the folders (the locked ones) windows says the files/folders doesn't exist...
View 1 Replies View Relatedive got 2 computers hooked up to a router by Ethernet sharing an internet connection, the internet connection works fine for both computers. i would like to share documents also between the computers
-one is a windows xp 32
-one is a windows 7 64
ive set up many networks in the past with a bunch of xp machines without any trouble but now i am having trouble my first step was on the windows 7 machine, i went to control panel -> network and sharing center -> setup a connection or network -> set up a new network this is where i believe i am making a mistake of some kind, it seems that the windows 7 machine is assuming that i want to set up the network wirelessly, when it is connected to the router via Ethernet. it simply brings me to a screen that says choose the wireless router or access point you want to configure, and hangs there with a greyed out next button everything seems to be going fine on the xp machine, i created a new network called "sharebear", told it that the computer connects through a residential gateway, enabled file and printer sharing, rebooted the machine, and confirmed that there was a new folder in the network places for shared documents.i went back to the windows 7 machine where it was still hanging, rebooted it, looked for the new network in network and sharing center and it wasn't there, i tried again to "set up a new network" on the windows 7 machine with the same hanging screen.
I have a small three PC home network. Two PC are running Windows 7 and one running Vista.
All three machines have the same homegroup settings. The ability to view machines on the network is very patchy. One machine can see the others, while another machine can only see one other machine. Sometimes machines cannot see any others on the network.
All machines are connected wirelessly with strong signals through a BT 2700HGV Business Hub router. All of the machines can access the Internet without problems.
All machines run Eset Smart Security with the Windows firewall is turned off.
Any advice to create a stable network would be appreciated.
I connect to a remote machine C from Machine B which is connected from Machine A, How can I send ctrl+alt+end to remote machine C ? I cannot access m/c C from m/c A, I need to go through B to access C.
m/c A --> Remote destktop to m/c B --> remote desktop con m/c C.
I have just done a clean install of Win 7 Pro 64. I have set up four accounts and for each one I have moved the user folders to a separate hard drive by using the Right Click Properties > Location > Move. I have done this for the following folders:
- Desktop
- Downloads
- My Documents
- Favorites
- Links
- My Music
- My Pictures
- Videos
I have done it exactly the same way on each account (and more than once! I've been imaging the disk and have restored backwards a few times.)
The problem is, on three of the accounts, when I move the My Music, My Pictures, and Videos then they do move correctly but three rogue folders appear named Music, Pictures and Videos. And I can't delete then since they are system folders.
But the weird thing is that this does not happen on one of the accounts!
how to get rid of the extra folders as they're cluttering up the users home folder and causing confusion.
In Windows 7 how can I change "Folders View" for individual folders without changing them system wide. For example if I select "always show icons" all my folders are set this way, and that's fine. But there are a few folders I have containing jpeg images, and I want to view those as "thumbnails" without effecting the others which are set to always show icons.
This was very easy to do in Windows XP but I can't figure out how to do it in Windows 7.
I have problem, recently all new folder are created optimized for video content with big pictures and such. How can I fix that so they are created as normal folders, because this is driving me nuts having to change this for every new folder.
View 3 Replies View RelatedThe structure of my photos library is Y/Y_M/Y_M_D, e.g. 2010/2010_04/2010_04_16 for today. I want to change all the '_' to '-'. Does anyone know an easy way of doing this?
View 9 Replies View RelatedThe structure of my photos library is Y/Y_M/Y_M_D, e.g. 2010/2010_04/2010_04_16 for today.I want to change all the '_' to '-'.
View 3 Replies View RelatedI am using MS Virtual PC v6.1.7600.16393.I had created a virtual machine on my system, which has been deleted now, but I have .vhd file created for that virtual machine.Now I am trying to create a new virtual machine by using the previous .vhd file.Unfortunately, when I start this newly created virtual machine, it asks to Insert Boot Media in selected Boot Device.I want to retrive few of my data stored in previously created virtual machine.
View 1 Replies View RelatedMy LAN consists of a gateway/router and 4 PCs A, B, C and D. A thru C are Windows 7/64; D is XP32/SP3.
Until a few days ago, everyone saw and could access everyone. Then C stopped seeing D. C can ping D, but it cant see it (in Network or in the network map).
C can still see itself and also A and B.
A, B and D can still see everyone.
Ive tried all the usual fixes from this and other forums: verified that all have same Workgroup name (no Homegroup); checked the IPs and other adapter settings; checked sharing settings; disabled Cs firewall; rebooted everything and everybody. Also tried to use the LLTD hotfix, but Windows reported that my XP-SP3 install already has it.
Have had a string of problems pop up over the course of the week. First thing that happened was that I had an error window pop up stating that there was a hiccup with a hard drive (don't have the details of error). Desktop rebooted and system started up fine but then noticed that most desktop icons were missing and program listings were missing from STARTUP.Friday night got a malware for WIN 7 Antivirus Software.I used Spybot to clean the system. Back to normal now but Sat morning while looking at video on MSN screen went black and system rebooted. Next came grey window stating that system files could not be found to start up.
Tried restoring last good setting but still not bootable. Noticed in windows error report that Win 7 was on (F:). Got into DOS mode and discovered my drive C: is now drive F: all other HDs are correct. Current C: is blank no file or directories.
Can I get hyperterminal on a windows 7 machine?
View 1 Replies View Related