So after a clean install of windows 7 ultimate. i installed all updates and hotfixes as well.I installed a screensaver that is 32bit the system can run 64bit as well.I set the screen saver under "screensavers" to run after 1 min. it never executes.I have it set in power settings to turn off display after 20mins never does.I can however put it in sleep and hibernation mode manually no problem but scheduled times dont work. what to do. Biostar said to download latest chipset driver already did, did not work.I have the latest nvidia card drivers installed as well.
Is there something built into Windows 7 that will do a screen saver of a library of photos, yet use *both* displays to show multiple photos? There are a couple in there, but they only seem to work on the primary display. Is there a way to enable multiple displays for these?
I have a nice 3rd party app I purchased in the XP days that does this, but was wondering if there was a way to get 7 to do it natively.
I used AMD Athlon II X2 260 and 2GB 1333Mhz RAM. I plan to overclocking it via FSB on BIOS and change my RAM timing so I can use 1600Mhz RAM, but I dunno where and how.
The only thing I know is increase bus speed and change the timings to 8,8,8,24.
Windows Explorer (not Internet explorer) just sits there for ages (several minutes) before actually displaying the contents of my computer. The structure on the left is all there but the right side where all the files should be is just blank with a swirly "processing" cursor. Strangly, if I go into an application and do file>open I can browse instantly around the computer in that browse window (while explorer is still sitting there like an idiot doing nothing)... In multiple browsers (IE/chrome) I'm getting a problem where some websites are working (confirming there internet connection is ok) and some are timing out. There seems to be no pattern as to which work and which don't and I've just noticed something that makes me think it's related to the first problem - I try to open website A but it keeps timing out. I try a couple of other websites, they work fine. I find another website (b) that doesn't work. Several minutes have passed since I tried website A so I try it again - it works! website b still doesn't work. I wait a few minutes and try again - it works! So in both cases it seems to be searching for something and not finding it, then it eventually finds it (or times out) and then it all works...
the display/monitor uses the generic driver for display and it is 1024×768 or 800x600 but it looks very odd it should be bigger because my screen is bigger. I have a acer monitor but is there something I can download to fix the display size?
Windows 7 64 turns off the monitor 1 signal after startup. At login, it powers off monitor 1 and powers on monitor 2. Windows 7 behaves as though dual display is working even though monitor 1 does not display. It's the same for single display, the monitor will not work on cable 1 except at startup.Both 'Extend these displays' in Windows Screen Resolution and 'Extend' in the Nvidia Control Panel is selected. And changing which one is primary does not turn on monitor 1. Nor does switching the position of display 1 in either (ex.left/right/top/bottom).GeForce 8400 GS; Dual Monitor Solution 59 pin (DMS-59) to 2 VGA adapter -tried two of these adapter cables.atest Driver: 306.23 - installed a clean reset install of the latest Nvidia driver released last week.Same Resolution: 2 of the 4 monitors I have tried have the exact same 'recommended' resolution (1280X 1024), both 60Hz, and even chose 16 bit color for both instead of 32 to reduce resources.
Linux worked: Dual display worked immediately when I tried it in Ubuntu 10. So, it's not the hardware. It works in Ubuntu 12 too but not properly -it won't transfer windows across displays. My Windows 7 64 is an upgrade from Vista 64. One person in another forum with the same problem resolved theirs by reinstalling Windows 7. But another got the same problem only after a fresh clean install of Windows 7 64 with the same GeForce 8400 GS and DMS-59 when it had previously worked in Vista. Dual Monitors - Only One Works at a Time
I am trying to run a Screensaver to install using Windows 7 I was given this to do Go to the attached .zip file and click it to run ,it will return a file called Install.exe right click on this file and select "run as administrator" the Batman screensaver will install. Next find a blank spot on your desktop and right click select personalize open screen savers and select install set you time interval and all should be well. Batman.zip When I click it to run , file called Install.exe right click on this file and select "run as administrator" the Batman screensaver The "run asadministrator"i it always ends up in Windows system c drive runs from their when I
Just setting up a new laptop with Windows 7 Pro. I would like to add a .scr file I created and used in my Windows XP Pro. Can I just move a copy of it into the Windows>System32 directory and then select it in the Personalization window (selecting the theme I'm using and then Screensaver)? In XP of course this was all done by right clicking on the desktop and selecting Properties. This brought up the Display Properties window where everything could be changed.
Anything to be careful of when adding to the System32 directory? Just don't want to screw anything up!
I set my screensaver for two minutes to check that it works properly. I have Windows Media Player running, and after 5 minutes, it still hasn't kicked in. Does it not work if WMP is running? I haven't touched the mouse or keyboard.
If I set my screensaver, It still shows "none" (see pic) I have had this problem on 7077 and 7100 (i think before that too) on this machine the screensaver still works but is everyone else having this issue? I also have power issues on another machine. It keeps turning the monitor on. That could be a mouse issue although I've tried two mice and it still happens. I am having all sorts of issues with themes in general but have any of you seen this?
I am trying to run a Screensaver to install I was given this to do Go to the attached .zip file and click it to run ,it will return a file called Install.exe right click on this file and select "run as administrator" the Batman screensaver will install. Next find a blank spot on your desktop and right click select personalize open screen savers and select install set you time interval and all should be well. Batman.zip When I click it to run , file called Install.exe right click on this file and select "run as administrator" the Batman screensaver The "run as administrator"i it always ends up in system 32 runs from their when I go to the screensaver list install which is the Batman Screeensaver name is frozen can I post a screenshot please can someone run the Batman.zip
Win 7 Home Prem SP1, 64 bit, 8 gb ram. Only using the screensavers that come with Windows, no matter which one I select at varying times it will fail. I can normally reboot and it works again for a time or switch to a new selection where it will work for 2-3 weeks again. I can't find any information on others experiencing the same issue and have been using numerous virus/spyware apps to find anything. MS Security Essentials, Avast, Stinger, Housecall, SuperAntiSpyware and only find tracking cookies.I know it would help if I could get the exact error message and will update when I do get a chance to write it down.
I've asked the screensaver to become active after 10 minutes of inactivity on the computer.For some reason this does not happen. I've tried to disconnect USB services such as wireless mouse, keyboard and joystick without any luck. The preview of the screensaver will start perfectly and moving the mouse a bit stops it, however in normal use of the computer the screensaver will not start.
my screensaver has worked in the past. at some point i noticed it was no longer working, so i messed around a bit. i think all i did was change the time to something different, and it came back to life for another day or so. it has stopped again, and all of my old tricks are no longer working. i'm pretty sure i have all the power settings correct, and i've been using the screensaver window for years, so those are correct too. I've read about wireless keyboards and mice being a problem, but both of mine are wired.
When my monitor powers down after inactivity, music starts to play. I'm assuming this is part of windows 7 themes but I cant find an option to turn it off.
I am looking for a screensaver from the Movie "Avatar" that is coming out on 18th December to go with my Windows 7 Official Theme. Can you point me in the direction or can anyone make one ?
1: Screensaver does not seem to kick in when it should (at all) I am updating my wireless MS 5ooo driver, that did the trick in Vista not allowing the screensaver to kick in....hope that works, or anybody else notice this too?
2: I am looking fo an HP multimedia keyboard driver to use so I can use the buttons to open my cd drawers, etc.... keyboard model kb-0630
Like many others I was having a problem with the screen saver not starting, and the monitors not powering down (had the same problem in Vista).
After going through a series of tests using msconfig and getting no results, I started to un-hook hardware. The first thing I un-plugged was my Contour Shuttle Pro v2 NLE editing controller.
The screensavre started right away and the monitors will now power down.
No solution for the moment except to keep it un-plugged from the USB port until I need to use it.
My hardware:Asus P5E-VM-HDMI mobo, core duo E6750 2.66GHz, 4GB RAM, Nvida geForce 9500 GT and 2x Dell 2209WA monitors.
A trouble report was sent to Contour, and I hope they will respond positivly.
Iv'e recently bought a new laptop and it came with Windows 7 Home Premium x64. I was setting up my computer and decided to set a nice little screen saver. Well I went to the menu and selected one. A message appeared that read "You need to download Direct 3D 9.0" or something like that. Iv'e tried to find it but I cant....Can anyone give me a download link? Or is it some other kid of problem?
MORE: It now appears that Windows Media Player will not play any videos or photos...only audio.
For the longest time now, I'd say about 4 months, my screensaver has not been able to turn on for whatever reason. I did my research online and found that my wireless mouse (Microsoft Wireless Mobile Mouse 3000 is what I have) could very well be the problem. I found, through research that 2 Windows Updates ("Microsoft - Other hardware - Microsoft Hardware wireless mouse driver", and "Microsoft - Other hardware - HID Non-User Input Data Filter (KB 911895)") could resolve it. While it had already said they were installed on my computer, I ended up uninstalling both updates in order to reinstall them but once I did, the screensaver still didn't come on.
I also went through Microsoft Help and they said there were other alternatives such as installing Intellipoint for my Wireless mouse (Which I did) and ending some "PowerDVD service" thing which I don't have. And now my screensaver STILL doesn't work when I have it set. Anyone else have any ideas or tips on what I should do? I also went to CRTL+ALT+DLT to bring up processes and went to the "services" tab and I don't know if there is any service I should END in order for my screensaver to work again.
Our screensaver is supposed to use images from the My Pictures folder, but it also displays symbols from some deep system root directory. These symbols are annoying. How do I stop them?
I have win7 and a wireless microsoft mouse and screensaver wont come when told to. I have heard that the wireless mice might be the problem but what is the answer?
