I recorded some footage with Fraps, opened each file in WLMP and Saved Project. Tried to open it in Windows Live Movie Maker and it wouldn't work. I have each file in a zip file: Clips.zip. I deleted each original file after saving it as WLMP.
View 3 RepliesI just recorded most of season 2 of the walking dead series yesterday. when i try to play the file in wmc i get the following message:
"Copying prohibited. The broadcaster prohibits this content from being copied. You can only play this content on the same computer on which it was recorded."
That is exactly what I am trying to do. Play it on the same computer I recorded it on.
Explorer.exe file and svchost file corrupted??how do i find them? i am running Windows 732 bit?
View 1 Replies View RelatedI would love 2 load my video footage on my pc. software doesnt wanta load properly n its like th usb lead can't be recognized.
View 4 Replies View RelatedI started up my computer around an hour ago and found the following message; "The file system32/hal.dll is missing or corrupt.re-install the file." So, at a loss as I'm not a Tech-person in any yway, I turned to the internet and found, after several XP posts, some to do with Windows 7. I'm on 64-bit, and have tried inserting my installation disk as well as the system repair.I've looked at this, but seeing as I'm Windows 7 & not XP I can't see why it would work; Error Message: Windows could not start because the following file is missing or corrupt I'm following another Microsoft guide that asked to me run a command in a command prompt, Bootrec.exe which in turn gave me 4 options, only I'm not sure which option to choose.
View 5 Replies View RelatedHow to Repair a Corrupted pst File ?
View 0 Replies View RelatedI was having troubles with deleting some files and folders in windows 7, I used a software called longpath. It works fine. Do I have any other options to do that thing? Or is it ok to be with longpath?
View 2 Replies View RelatedI need to down load my Sony Hand cam to Windows ultimate 7 so that I can email video clips, but I can't find the right software or drivers. The handy cam come up when I connect using the USB but it wont show the video clips just the pictures
View 1 Replies View Relatedproblem either stopped on the usb data transfer from windows 7 PC to a usb HDD or flash drive; or crashed and give errors. However, i dont encount this sreious problem but rather annoying problem.
As soon as i use my Windows 7 PC to copy a file to usb stick, the process is all ok, but when i read the file, it seems to be corrupted, example, if i have put a avi file in the usb drive, it will play as skipped.
I have updated the hotfix http://support.microsoft.com/kb/976972 but still doesnt fix my problem. I have updated the chipset driver from nvidia web site, still no help.
I know for sure that problem occured after i fresh installed to windows 7 from xp pro. I have also tried to uninstall the usb root hub but still give me the same driver as it was.
I have an Acer Aspire 5734Z with Windows 7 Home Premium 64-bit installed and ever since I got my computer I've been having trouble starting Windows normally. Like many time before, a week ago my computer started again freezing at the Windows logo every time I put it on. Here's what I tried to do to get things back to normal: 1. I ran CHKDSK /r, and got my computer working, Two days later, I had the same problem. So, I ran CHKDSK /r (found 48 unreadable file segments, deleted 60 index entries, corrected and deleted file names..), but it froze at stage 3 of 5, "verifying indexes", and after 19 hours I shut it down. Still having the same freezing problem, I ran CHKDSK /r once again (found 13 bad clusters..) and I noticed the line "Windows has made corrections to the file system". After the check was complete Windows wouldn't still start. I tried all the different Safe Modes, but got stuck at loading "windowssystem32DRIVERSAVGIDSEH.sys" or the file after that.
View 9 Replies View RelatedI cannot delete files. Error message comes saying that files are corrupt. How to empty my external hard disk? I don't want to save the files.
View 1 Replies View RelatedEvery time I try to start my computer, it says "windows is loading files," which it normally doesn't, and then Startup Repair pops up. I let it run for about an hour, and it finally finished, but it said it could not find the source of the problem. I looked in the log for the Startup Repair, and it said that everything ran smoothly, except for the file scan. it took over 100,000 ms for it to process, and it said the test failed, along with mentioning that the system32 file was corrupted. I don't know much about computers, not do I remember getting an installation disc. (The computer was a gift to me.)
View 1 Replies View RelatedI'm using Word 2007 and it gives me the option of saving a file to the .doc format instead of .docx. However it gets corrupted and it ends up looking like a notepad file when I open it.
View 2 Replies View RelatedI have Dell 15r, which runs on win 7 home basic, i recently started using toshiba hard disk,i have some files in the external hard disk when i try to move them or delete them i will get this kind of error message. Error : 0x80070570 The file or Directory is corrupted and unreadable.
View 1 Replies View Relatedafter surfing the net. watching videos from Internet, my computer suddenly shuts itself off. after rebooting my computer. the folder icon became corrupted and i can't seem to delete it. it gives the message ' windows is not responding '. after restarting the computer once again, the folder becomes accessible again but the file icon is still corrupted. i tried changing and restoring the icon but neither seem to work.
View 1 Replies View Relatedwhen I ran sfc scan recently it found a problem that can't be repaired (I've run the scan numerous times). upon checking sfc details, this appears to be the problem.Cannot repair member file [l:22{11}]"PINTLGB.IMD" of Microsoft-Windows-IME-Simplified-Chinese-Core, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch Cannot repair member file [l:22{11}]"PINTLGB.IMD" of Microsoft-Windows-IME-Simplified-Chinese-Core, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch This component was referenced by [l:202{101}]"Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.WindowsFoundationDelivery" Could not reproject corrupted file [ml:520{260},l:62{31}]"??C:WindowsIMEIMESC5DICTS"[l:22{11}]"PINTLGB.IMD"; source file in store is also corrupted? This laptop is only 3 weeks old. I ran sfc scan on my old computer (about 5 years old), expecting many corrupt files but it showed no damaged files.
View 2 Replies View RelatedAfter I used "Acronis Disk Director" in a HirenBoot CD to cut some space from my D drive to my C drive (boot drive), I've got this "Windows is checking the D drive" then "Corrupted master file table. Checkdisk is aborted" on my D drive. After doing some homework, I've tried corrected it by using testdisk's Fix MFT function but "Both of the MFT files are corrupted. Can't fix". I did not back up the whole partition. I do not really want to buy $60 + commercial software that TestDisk recommends just to fix this possibly once-in-a-lifetime issue. However, if recovery softwares is the only option left, then I have to use them.
View 1 Replies View Relatedrecently i've been having a problem when trying to move ISO files from one harddrive to another. I've tried with 3 different ISO files and all come up with the same error:"An unexpected error is keeping you from copying the file. If you continue to receive this error, you can use the error code to search for help with this problem.Error 0x80070570: The file or directory is corrupted and unreadable."First time I got this error i just thought something had gone wrong with the download so i deleted the file and downloaded it again. Same problem. This made me think that maybe it was just that download but now I have tried 2 other files and gotten the same error every time. This only happens with ISO files though as in case it was the harddrive or connection issue I tried transferring some other .avi files and they went across without problem.
View 9 Replies View RelatedI converted an old XP machine to a VHD with disk2vhd. Once imported into virtual pc the machine starts up but fails before booting with the message: missing or corrupted file: system32driverpci.sys
View 1 Replies View RelatedI am a moron and I messed up the disk partitions on my laptop. I was tryin to increase my Cdisk space by allocating the free disk space from my D. I used this software called "partition magic" and just when everything was going smooth..some error occured and the partition did not take place..to make things worse..I can't acces my D, The error message says "D: is not accessible.The file or directory is corrupted and unreadable."No clue what to do..I NEED to recover my data from my D drive..What should I do?
View 3 Replies View RelatedI got pop up in utorrent says a directory is corrupt, I start to run chkdsk on that drive. In this case in have drive letter E. I click on computer, then go to the drive, right click, properties, tools, check now. It says the drive is need to to forced to dismount. I click on ok. then in computers, the drive just show the letter, not size or disk meter. In the open windows on task bar, I did not see scan disk running, or maybe I accidentally closed because I was switching between several programs.
I thought restart pc the drive will show again, but after restart, the drive does not show up, it says 'E: is not accessible, the file or directory is corrupted and unreadable.' I tried to start pc 2 times, still same. I downloaded Partition Wizard Home Edition (minitool partition wizard home edition 5.2) and running it, it showing my files are still in the drive, but not accessible in windows. I also run chkdsk in recovery environment, but still says disk is corrupt, chkdsk cannot continue.
Every time the computer is turned on or restarted it runs Starup Repair. When i look at the diagnosis it says 'boot critical file c:\ci.dll is corrupt'. I have already tried to restore the computer but i don't have the discs where i have backed up the computer. I have also run a virus scan with Avira and it did pick up 4 viruses and i removed them but the error still occurs.
View 2 Replies View RelatedWindows 7 Pro 64 SP1. He has 2 accounts on his PC (administrator, and 'user'). Both have admin privileges. When he logged in this morning using his user account, the file associations for all applications appear to have been corrupted. In his user account, all programs launch with the IE download manager which gives me an option to run or save. When 'run' is selected from IR download manager, a window quickly flashes on the screen and closes. I am unable to run any application including windows explorer, regedit, cmd, etc, including system restore.
He has Symantec Endpoint which also launched in IE download manager. My friend does not recall installing anything recently. I tried booting in safe mode and logging into the user account and the behavior is exactly the same. When I log in using the admin account (in regular mode) everything seems to be fine. The system restore option is available as are all the file associations. A Symantec scan using the admin account shows nothing other than a single tracking cookie. The only thing I can think of doing is a system restore from the admin account but thought I'd post this to the group to see if there was something else I should try first.
I have Vista Home Premium 64 bit and I'm trying to upgrade to 7. I bought the college copy so I only have the download, no DVD.
When I get to like 10% of installation I get error 0x80070241, and it says that a file is corrupted or missing and installation cannot continue.
I know everyone hates n00bs who ask questions that have already been answered, and I did google this first (and call Microsoft), but the results I found on google went right over my head and Microsoft was not helpful at all (I shot them off an e-mail thinking I might get better service that way, but they haven't responded yet.)
Anyway, what can I do? I really really want Vista off my computer but it like refuses to die lol.
My company computer (hooked up to our internal network; no homegroup) has just had a fresh install of Windows 7 Pro 64-bit. I went through the process of mapping network drives and had a problem when it came to connecting to IP addresses and folders in the format of '\servershared folder'. Turned out that I had to change a security setting.
Following the instructions on this site, I was able to resolve that issue. These network locations are CNC machines and the files that I am placing on the machines contain CNC code (G&M code and X, Y, Z values for 3D machining). Basically, G&M code cannot have multiple X, Y or Z values on the same line (it wouldn't make sense to go to two X locations in the same move).
When I transfer CNC files from a network location (all of our files are stored on a server) to the CNC machine, they occasionally get corrupted where part of one file is contained in another file. I have tried transferring one at a time and in bulk, both with the same result.
I have a Sony Vaio VPCEB23FM, At first when I tried to go to windows i got a black screen that said "Operating System Not Found", so my friend tried to fix it with a windows 7 repair cd. But here is the problem he accidentally formatted the Hard Drive which deleted all the files and file the manufacture put in it, he also tried to mess with the ranish partition manager, so he tried to install a fresh windows 7 OSX but the laptop shutoff, now he tried it again and we get a message saying "setup cannot continue due to a corrupted installation file" I cant get to my desktop either.
View 1 Replies View Relatedi am trying to record some game play for a Internet channel and i keep getting lag spikes on 1 game. when ever i play league of legends i always will have a frame rate drop. i usually get around 120-90 fps without recording and 60-40 fps with recording but for some reason there will always be a drop to around 1-10 for about 2 secs.
View 9 Replies View RelatedIf I connect my TV to my PC via VGA and start playing a game on PS3, will it appear on my PC screen and can I record that with FRAPS?
View 3 Replies View Relatedive recorded a few clips in FRAPS and they were saved as avi files. When I try to open them in windows media player, I see a small thumbnail of the first frame, and only the sound plays. I installed DivX, and it says AVI is unsupported, and I cant find avi codecs for DivX. Since that didnt work, I tried K-Lite codecs, but I still receive errors. gspot says that it uses the FRAPS codec, which is installed.
View 4 Replies View RelatedI plan to record PC gameplay using Fraps, which creates very large files. In order for me to do so whilst still maintaining high FPS in game, I have to record to my SSD. However, this fills up very quickly.make a program that automatically moves the recordings over to the HDD as they are created. Fraps has an option to split the recording up into 4GB segments, so what the program will need to do is detect when the second section has been created, then move the first across, then detect when the third has been created and move the second across etc.
View 1 Replies View RelatedSo today I decided to record some gameplay with fraps, but once I was done recording a message popped up saying:
"The application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information."
I've looked this error up, I have reinstalled the C++ redistributable packages, and it does not work. Basically whenever I am finished recording a fraps video, or even if I navigate (via Windows Explorer) to the directory in which the video files are located, I will get this error. As well as playing or moving the files. I have uninstalled and reinstalled a newer version of fraps, but still, no go.