Was using Office 2007 on Windows 7 x64. Did a complete uninstall, cleaned up registry, removed ALL add ins. Rebooted, everything working OK.Did a clean Office 2010 (technet rtm) 64bit full install. Imported from backup my pst file and rules, contacts, etc.Outllook works fine except preview handlers. I can preview pdf (using acrobat 9 handler), jpg, txt, but I CAN NOT PREVIEW OFFICE FILES, AKA EXCEL WORD OR POWERPOINT.The preview handlers are installed, I downloaded Stephen Toub's Preview Handler Association Editor, the handlers for office files ARE present, but I get a message in preview pane saying "This file cannot be previewed because there is no previewer installed for it!
This just started recently. Most messages come through with images but certain ones, and it seems to be from the same senders, the just have a place marker...the little box with the red X. The pic below is from [URL] If I open the email in another email program, the images are there so it isn't on their side.
I have looked at the Trust Center and that is set correctly.
We have a Dell laptop with a unique problem.. An email showed up today from a person in our company.. date was today, however, the preview pane date had a date in the far future.. All other persons that received this same email have had no problems. Any idea why this one laptop would future date in preview pane?
I have Windows 7 64 bit and IE9 and Firefox loaded. When I click on a hyperlink within a trusted e-mail it says "This operation has been cancelled due to restrictions on this computer. Please contact your system administrator." I am the administrator but cannot get this to work. This has happened since I updated my IE a few months ago. I have tried the usual fixes but not registry key fixes as I try to leave them alone. Is that the only solution or is there something else out there? Should I remove IE9 and start over?
I've been using Contact Groups on previous computer, but when I moved over to my new PC and loaded Office 2010 along with Outlook, the contacts groups in OUtlook does not seem to work.
None of the groups I had before were imported, although I have imported all of the contacts themselves.
When I create a new Contact Group it seems to be fine - it allows me to create it, add some contacts, and save it. But, I go to create an email and want to use the contact group, nothing will come up as a group. Also, when I look directly into contacts folder there are no groups there.
Earlier this week I was having a problem with another program that I thought was being caused by something corrupt in my workstation's domain user profile. So using the machine's local admin user, I renamed my domain user profile folder to something else, deleted the registry key for that user profile, then rebooted and logged back on with my domain user name. This created a new user profile folder in C:Users. Then I went about copying my files over, bookmarks, set up all my e-mail accounts again and imported calendar and contacts from the file in the old user profile, etc.
Well now my Outlook 2010 will not display a desktop alert when new mail arrives, and sometimes won't even make the sound for new mail. I have 3 different IMAP accounts on my Outlook, with my office e-mail being the default account. Desktop alerts have always worked fine on this machine, with Outlook 2010, with this e-mail account, before recreating my user profile. Now suddenly it doesn't want to work at all. The little mail icon shows on the far lower right, but I run dual widescreen displays and I don't always see that icon way over there. I'd rather have the desktop alert pop up near the middle (right of left screen, or left of right screen) where I'm more likely to see it.
I tried turning desktop alerts off and back on in Options. Also tried right-clicking the Outlook icon in the system tray and turning Show New Mail Desktop Alert off and back on. Nothing seems to be working.
I am running Windows 7 Ultimate (64 bit) with Service Pack 1 and Office 2010 Professional (32 bit). Before installing Windows 7 and Office 2010, I formatted my hard drive and did a clean install. I am having an issue with previewing JPG files within Outlook 2010 -- when I try to preview JPG files I get the following error message: �this file cannot be previewed because there is no previewer installed for it�. Of course if I double-click the JPG attachment, it instantly opens in Windows Photo Viewer. I can preview ALL other types of attachments within Outlook, just not JPG files. All the proper File Preview Options are selected under Trust CenterAttachment HandlingAttachment and Document Preview
I've been trying to create a Task in Outlook from a Word Document that I have created on this computer. The idea is that a shortcut to the document is created as an Outlook Task. Click on the shortcut, and voila - there is the document.The "Create Microsoft Office Task" icon DOES send the document to Outlook as a Shortcut in a Task, however, when I open the task, Outlook says:"Outlook blocked access to the following potentially unsafe attachments: Shortcut to 'document name'."It's NOT an unsafe attachment; Outlook WILL OPEN this document if I send it as an email attachment. Outlook will open .docx files types.
I am trying to move one pst file from one laptop which has Outlook 2010 32 bit to another laptop which has Outlook 2010 64 bit installed, steps taken 1) Copied the pst file from the User/AppData/Microsoft/Outlook folder to usb. 2) Pasted the file from usb into User/Documents folder. 3) Tried to open the file in Outlook and I get the error that Outlook encountered errors while opening the file. Now how is that possible when the file is working perfectly in one laptop but when I copy and paste it into another it gets corrupted? Is it due to 32 bit to 64 bit outlook? I tried to repair it using scanpst and it brought back few mails?
I have disabled the quick access toolbar for the users in .accde file, so no toolbar appears when the Access 2010 application starts. When the users preview reports, I want to enable the print preview button only.
I have a new Dell Inspiron 14Z running windows 7 pro 64bit and i'm using Microsoft office 2010. I'm trying to retrieve archived emails that i backed up on an external hard drive from a previous computer, the files are .pst which is an outlook format but i keep on getting an error message saying the file is not an Outlook data file (.pst). i dont have any other way to retrieve these emails since they were deleted from the server and its about 1.5 years of work emails. Not sure what to do? should i move the files from the external driver to a different location on the computer and open them, or are they corrupted and need to be fixed?
I have a recurring issue that drives me nuts to no end: Everytime I put my computer to sleep (I'm 99.5% sure this is the cause), Aero preview crashes, and prevents me from switching to an application with more than one window open (that is, using the taskbar). I have to kill and relaunch explorer to bring it back, but as I shut my laptop lid often, this is hardly ideal.
i am running windows 7 64 bit i have microsoft office 2010 minus outlook, so i have just bought outlook 2010, installed it,but every time i try to open now i get a pop up saying the server is unavailable?
I'm running Windows 7 Professional 64-bit and Microsoft Home and Office 2010. Everything was working fine yesterday, but when I came back to work today and attempted to open Outlook 2010, I instantly received a message saying: "Outlook failed to launch in safe mode. Do you want to start repair?" If you try to open it again, it opens a second process of OUTLOOK.EXE*32 in the Task Manager. Here is what I've already tried to do while troubleshooting:
- Restarted the computer - Performed a MS Office Repair, it completed, rebooted (Did this twice) - Uninstalled MS Office 2010, rebooted, reinstalled it, rebooted, but same problem occurred - Verified that the other Office programs work (Word, Excel, etc) - Tried to run "outlook.exe /resetnavpane"
I'm currently stumped at the moment. I cannot even access the profiles through Control Panel > Mail.
There are a lot of questions about this and none of the proposed solutions seems to work for me. Now that MS has moved on to the 2013 version of the software, it still does not work on 2010. What did people do? Here is the problem have a .pst file from Outlook 2007 on an old computer. I want to use that same .pst file on a new computer running Outlook 2010. I want all my new mail to go to the old .pst file and nowhere else. Now here is what I've tried and what seems to happen:When starting O'2010 it needs your email address. I create that but then it creates a new .pst file named firstname.lastname@example.orgAnd it creates it in C:/Users/myname/AppData/Local/Microsoft/Outlook. If I try to move the new .pst file to the folder entitled C:/Users/myname/Documents/Outlook Files, then when I restart Outlook it recreates the deleted .pst file back in the AppData folder
I have just completed transfer to a Solid State Drive using a clean install of win 7 and all programmes etc.Everything appears to be running well but I need help in restoring my Outlook account. On first starting Outlook on the new drive I was asked to set up an account but obviously don't want to end up with two of them so I backed out.I do have my original .pst file backed up to a memory stick.
I`d like to know how to backup the outlook :contacts,emails, archive. I try this way ! File/open/export/export to a file/Outlook data file( pst.) browse location/Select Folder to Export From/etc.maybe i did wrong!I have 8 gb to backup and the is a sign said that icant backup more then 4 gb .
I do not get a Page set up dialog box when I click Print - only a Print Options with Properties that if you change gives a message saying that some of settings changed may not work in Outlook and to use the Page Setup dialog box
I used to be able to conect to my office email from my home computer but I now get an error message code 20 that mentions something about a "proxy server". Is there a fix within Microsoft 2007, itself, that can fix this? Or do I have to purchase one of the MANY registry repair programs?
I'm trying to move outlook 2003 .pst to outlook 2010 on a new computer running windows 7. I have copied the ..pst from the 2003 XP machine to a flash drive and copied them into the outlook folder on windows 7 under documentments/outlook folder which is new in 2010. I have already created a single pop account in 2010 and been using for a couple of weeks while trying to move the old 2003 pst file. It seems simple, have read enough how to's but nothing seems to work. How do I do this.
I am running Outlook 2010 32bit with Windows 7 Pro 64bit. After installing google outlook sync (and subsequently uninstalling) an annoying popup window continues to appear when I start outlook. It asks me to Choose Profile. I have only one profile named "outlook". When you click "options" you can check a box that says "check as default profile" This does not make the annoying popup go away. It still pops up the next time you start outlook. After searching the web for a fix I found one promising work around. Access control panel then select "mail" here you go in to outlook profiles and check make outlook the default profile. The problem is this doesn't work with Windows 7 64bit and Outlook 32bit. In the control panel "mail" is grayed out and when you click on it nothing happens. How you can access Outlook profiles with this set-up?
I run an accounting program called PASTEL ACCOUNTING which generates emails that are sent to OUTLOOK 2010's outbox. i can see them in the outbox and they are subsequently sent correctly. i know this because they are received correctly by the recipient. However once the mail has left the Outbox it is not stored in the SENT folder and i therefore have no record of its existence! PASTEL tell me that since it has found its way into OUTLOOK it must be an OUTLOOK problem! i have a feeling MS will tell me its a PASTEL problem..
I have just brought a new dell laptop, and office professional. I have tried to set up a pop email in outlook 2010, but I did it wrong, so I deleted it and started again, but instead of creating a new one it called it (2) not just the normal name. I have gone through the process and it says it works, but theres nothing coming into my inbox, and what I think is happening is that its going to the original inbox of the one that I named wrongly.
I would like to synchronize my Outlook 2010 (where I have all my contacts etc.) with iphone (where I have none - but I do ical and reminders). Can anyone help? I read a thread here saying one could do it via Google - but I don't really use gmaIl (I do have one account but not a very active one).
Our clients are Windows 7, 64bit, with IE9. We have a SharePoint 2007 farm (Windows 2003 Servers) and we would like to store EML files inside Document Libraries. When a user clicks on an EML file we would like to open the file in Outlook 2010. We have set the file association to open the EML files through Outlook in Windows but the files when a user clicks on an eml file are opened through IE9.
We are currently using 3 computers.. one using outlook 2010 and the other 2 the original outlook express that came boxed with XP.Problem I have is with my outlook 2010 computer. Normally when we receive emails whoevers computer they go to first is the sole person that receives them but with my outlook 2010 computer I receice them and they also go to all the other computers.Is it possible to change the settings in outlook 2010 to correct this?