I've been asked to look at a network that consists of all the os's from 98 to Win 7. The Network worked fine prior to the addition of the Win 7 machine. They were all in the same workgroup and were able to share off each other.
The current issue is that though the Win 7 machine can be attached to the network and can see and access files off the ME machine and the Win 98 machine, they are unable to access files off the Win 7 machine. They get access denied messages. The XP and the vista machines in the workgroup have no problem connecting to the new Win 7 machine and can see what I've placed in the public libraries.
They can see the Win 7 machine on the network and can ping it.
I'm wondering if anyone has successfully networked a win98 machine to Windows 7?
I'm looking at purchasing some PCs w/Windows 7 for a small business that presently has primarily XP Pro machines except for 2 PCs that run win98. The 98 boxes run proprietary software that controls production machines in the shop and they cannot be upgraded. They do however need access to files that would live on the Windows 7 machines.
If anyone has tried this (or would like to just for kicks) and could provide feedback on:
a) it is possible
b) what extra steps would be required to get this working
i switched my bosses computer to Windows 7 here at work, all went fine.. we are using win98 under VMWARE 6.5 for our windows 98.. everything works great, except i cannot get it to access the printer on the Windows 7 machine, it sees it but always gets a access denied error, i have turned off password sharing.. and any of the xp/Windows 7 machines see it fine.. just the damn 98.. and i can't not use 98 cause of our POS software...
I set up my 7 machine on an XP network. The 7 machine sees the shared folders, and I can get to them with no problem. When I try to look at the 7 machine from the XP side, it asks for a user name and password. I never set one up, because I would like to run an open network. (I live a mile down a limerock road with no close neighbors.) Can someone tell me what I'm doing wrong?
Why in the world did Microsoft change the default network name?
I have a new PC running Windows 7 RC, but I can't get it to find the shared folders on my Macs, nor can my Macs see the shared folders on the PC. Any ideas how to get at least one way working?
I'm running 10.5.7 on the Mac, and if I "Connect to Server" and dial in smb:// and the PCs IP address, I get a login window, but it won't let me log in. It says I have incorrect user name or password. But I have no password on the PC.
Also, I followed the advice in another post, Accessing Mac and windows 7 on same network - Mac Forums), but it didn't make any difference.
Right. First off i admit to not knowing a lot about networks but im sure this isnt right. I have a wired network at home and on it i have a Popcornhour media streamer.
With XP as soon as the OS has loaded i can go to the Network browser on the PCH and it sees my work group and the PC and i can access my shared folders. Same thing the other way around. If the PCH needs a re boot its all up and running agin within a min or so.
With Windows 7 7068 i have to wait anything up to half hour before my PCH can see my work group.
Same router, static IP addresses and DHCP server turned off.
They have a peer to per network, formerly with two windows XP computers. On the main computer, they have their main accounting program, which runs on a DOS version of Lotus Works. It's old, but she knows it so well, and it does everything they need. She recently upgraded her main computer to Windows 7, and was able to get Lotus Works running, and, with the LW folder shared, they can actually open Lotus Works from a second computer (running Windows XP) just fine. There is no local copy of Lotus Works on the Windows XP computer, it simply starts the program from a shortcut targeting the LW.exe file as mapped. This has worked fine for quite a while.Over the weekend, they wanted to upgrade the Windows XP computer to Windows 7, (replacing it with a new computer) I was able to set up their peer to peer network, mapped the second Windows 7 computer to the LW share and tried to make a shortcut to the LW.exe file. (both computers are now running Windows 7 Pro, 64bit version) I realize I'm going to have to change compatabilty mode, but the problem is getting a working shortcut on the desktop. UAC is off on the second computer, but I get the following message when trying to make a shortcut.:"Windows cannot create the shortcut check to see if the disk is full" The machine where I need the shortcut is running AVG 2012 Free edition and Windows Security Essentials. What would be preventing me from being able to create a shortcut?
I have three PC's all on Windows 7 running on a home network. I have a good PC which has been replaced, which I would like to put on the network with four hard drives, I would like to backup the data from each PC onto its own HD in the PC.
I have looked at several programs to effect a real time backup system but need some advice at to which to use. (preferably a freeby as being retired money is short) If possible I would like to be able to restore each program data seperately if required, rather than have to restore all the backed up data to a certain PC as one file. Any help gratefully rec'd.
Microsoft had tried to get its "Castle" networking scheme into Windows Vista, but the feature will finally appear in Windows 7 as HomeGroup. Essentially a combination of workgroup networking with file and media sharing, HomeGroup makes it easier to create a home network where PCs share pictures, music, videos, documents, printers, and other resources with each other.
I am running Windows 7 RC 7100 (of course) and I'm wanting to get a network setup between two computers over two routers. Here's my story:
I just moved in with two of my friends and we have 6 computers (3 laptops and 3 desktops) and we have 2 360s and 1 ps3. So needless to say my friends 5 port router wasn't enough for all the equipment so we decided to use my router with his.
Now after a day of configuring we have it running smooth and playing games with no troubles but there is one problem we want to access media on the ps3 from all the computers. I can access my media from the ps3 no problem since I'm on the same router as it but I can't access my friend media because he is on the 2nd router.
We have two belkin routers the main one has my friends PC, his 360, his ps3, and my router connected to it. My router has the remaining two pcs and my ps3 connected to it. Does anyone have a solution to this problem? I have tried putting the systems on one work group but that failed.
I also tried connecting to one homegroup but I can't detect his group and vice versa. If anyone could tell me how to set this up I would be grateful. My friend thinks it's might involve the routers DHCP but I'm not sure.
So I want to network my OLD Vista laptop and my NEW 7 desktop. Both are named Chase-PC. I open Networks (on the desktop) and open Chase-PC and it opens my desktop files, not the laptop. If I go to my mothers vista it opens my vista laptop..
I tried to read the tutorials from this forum regarding networking. I am too dumb to understand. They are all Greek to me.
Is there a " How-to for Dummies " instructions for connecting my 2 laptop computers ? Windows Vista Home Premium 32-bit SP2 Windows 7 Home Premium 64-bit SP1
They are both wireless enabled, but because my Vista computer battery refuses to charge, it is always plugged in. ( $124 for a battery replacement ? No way. ) In fact both my laptops are plugged in all the time. ( don't laugh ).
I have a Gigabit router, a Gigabit Ethernet Card and all my cabling is Cat5e, my runs are all less than 50' and it still says I'm connected @ 100Mbps. Is there something special I need to do to get 1Gbps?
It seems that sharing files between win 7 and xp is quiet the common problem. However, I am not finding a clear answer. I read through a lot of posts on different forums, and tried many of the suggestions.
I am running win 7 pro on my laptop, and win xp pro on my desktop. I have both machines in the same workgroup. I ran the wizard for file sharing on the XP machine, and it can succesfully see my other XP home computer on the network. On the win 7 laptop I went through the set up for sharing as outlined in the forums. So basically network discovery etc is on, im not using home groups etc.
If i look in my network folder, I see no other computers, except of course for my own shares. I installed a fix on the XP machine which was suggested, called the link layer something ( i forget the name now, I could look it up). Still nothing.
Here is the twist. If i type in ipadress then I can access the XP machine shares without ANY problems. (copied some files jsut as a test). Similarly, I can access the Win 7 shares from XP using the above method.
Now, how do I get the computers to pop up in my network window, so I can actually view which computers are available and select my shares?
Oh, and I dont believe that I have to wait 15 minutes for the computers to actually get discovered. That would be a pretty big mistake on the part of windows 7, given that Xp discoveres without delay.
I've got a few questions regarding networking in general and then some issues that have popped up since upgrading (in place) to Windows 7.
1) Generic question: If I were to install a Wireless N router would the wireless network default to the slowest connection on the network? For example, if I had two N wireless adapters and one B adapter would the entire network run at B speeds? If so, would a dual band router allow me to circumvent the issue?
2) Generic question: Would the same issue as outlined in #1 be a problem in a wired network? Can I mix 10/100 and gigE on the same wired network and achieve gig speeds between gig-enabled devices?
3) Specific: I have an HP dv9500t that I upgraded to Windows 7. HP has not released Windows 7 drivers for this machine but I have been able to work around the few issues that I encountered. However, my wireless connection to my Linksys AP (Wireless-G broadband router WRT54G2 with up-to-date s/w) seems to be dropping and recovering on a regular basis. I have not seen the issue on any other wireless network. If I am downloading a large file (say 1G) the d/l will proceed at full speed for ~45 seconds and then drop to zero for ~45 seconds. I'll usually get the "limited connectivity" alert but then the link will restore itself and begin transferring again.
I've run some of the Linksys diags when it is down and it usually tells me that the default gateway is unavailable and resets my wireless adapter and the whole routine starts again. Quite frustrating. I've worked with Linksys tech support (they claim no known issues with Windows 7) and their supposition is that it is an interference issue and they suggest I change wireless channels.
I've tried 6 different channels and the issue does not change. I have tried upgrading the adapter drivers the the latest available from HP (Vista drivers, not Windows 7) and have also tried drivers from the adapter manufacturer (Intel Wireless WiFi link 4965AGN, Win 7 drivers) but the issue is still there. I have also rest my AP back to factory defaults to no avail. It certainly could be that I have burned through yet another wireless AP but before replacing it I wanted to see if anyone might have suggestions.
4) Since, as far as I know, Homegroup cannot be used unless all of the PCs on the network are Windows 7 I am trying to utilize Workgroup settings to config my network. The problem is that my wirelessly connected laptop does not seem to have access to my wired workgroup unless I set the SSID of the AP to the same name as my workgroup. Is this normal operation or is there a good tutorial around showing me how to set this up?
My main server at home runs Win 7 Pro (64). I configured its sharing so that another one of my PCs that runs XP Home (32) can access public shares on the server and access a shared printer on the server...and life is good. I can access those shares and the printer without a username and password.
The problem - another desktop that I have running Win 7 Home (64) cannot access those shares without entering the credentials for the server Win 7 Pro server.
I am confused. How can the XP server access the files without any username/password but another client running Win 7 Home is required to enter a username/password?
I've spent 2-3 days now trying to solve the networking mysteries of Win 7.
In a nutshell. This computer (Windows 7-64) cannot see the other computers and shares on our small studio network except for the windows 7 machines (also Windows 7-64). (the other computers/shares are all XP)
We have 2 identical machines side by side, one can see all the computers, this one cannot. Both are fresh installs.
There are approx 8 other machines/shares on the network.
Both computers have vista installed on a seperate drive that see the network fine if booted into.
Both have homegroup turned off, and have workgroup enabled with the same workgroup name "WORKGROUP". Both have discovery and file sharing enabled. Both use the same network controller, and have the same updated Windows 7 driver.
-I have tried turning on/off iv6 (which I see some people think/don't think is an issue).
-I have disabled FIREWALL
-I have disabled anti-virus
-I have rebooted after each change
-I have tried different locations/cables on the hub
-I have tried the cable/hub location on the Windows 7 computer that is seeing the network computers.
ps. I forgot to mention that if I type in the IP address in addres bar I can access one of the other machines, but it will not show up in the network window.
I am really at a loss, and have read about every post I can find, and tried every suggestion.
Is there a dummies guide to networking? I am totally confused how to get this to work. Explanation of the basic terms such as home groups, work groups, networks, public folders, sharing, accounts, etc, etc would really help. Our house has several pcs running Windows 7, vista and xp.
Trying to network my XP desktop and Windows 7 desktop. The Windows 7 machine is connected by wire to a 2-wire wired/wireless router. The XP machine is connected via wireless D-Link DLW-G510 to same router. I have internet connection from both devices with no problem...but cannot get either to see each other from the other. Using the 2-Wire interface I can see both devices on the network thru the 2-wire router. But I cannot see either machine from the other via network in windows.
I have Windows 7 machine set to Work network, sharing and discovery enabled, and passwords required turned off. On the XP machine I used Network Setup Wizard to setup the network on that end. On both ends the workgroup s named "WORKGROUP" and the machines have unique computer names...Windows 7 is USS-Excalibur, XP is USS-Excelsior.
Yet neither sees each other. In addition, I have a work laptop running Vista connected to my corporate work network via the same 2-wire router (wired). And I can see that laptop device from the Windows 7 machine when I show the network map, but not the XP machine.
Okay, I just got a new laptop with windows 7 on it and I am trying to network it to my xp home network. On my xp computers, laptop and desktop, I can see my windows 7 computer but can't access it. Even turned off the easy file sharing and still can't access it. Cant even ping the windows 7 from them. The windows 7 laptop doesn't see either of the xp computers. I can ping them from the windows 7 laptop but can't actually see them on the windows 7 laptop.
I am using a linksys router and can access the internet just fine on the windows 7 laptop and it is connected wirelessly. I have read through several threads trying to figure this out but most people can see the xp from the 7 but mine is the oposite. I made sure they are all setup on the same workgroup name that is how the xp can see the 7 but that is as far as i can get.
After installing windows 7 Ultimate on to two computers and having all types of trouble to get a network working correctly. I am networking 2 desktops and a laptop with XP and also have a media center in the lounge room all connected by Ethernet cable. Under windows XP and the same configuration I had no problems. I would like to know what DRUGS the programmers at Microsoft were on when they come up with this package. Why the *** they changed the networking setup to a home-group witch has completely ruined a good system up.
when i update my windows 7 to sp 1 doesn't show other computers in my wireless network and can't ping other PCs but when i connect to wired lan every thing work fine firewall is off,network discovery is on,no antiviruses has installed and microsoft security essentials is fully disable?
I do try to network my files over a wifi connection but can't access to all of them...
PC1 Vista: Sees all the others
PC2 XP home: Sees the same
PC3 Win 7229: Sees the same
1) I can't find where is the password on Vista!!
2)Vista won't accept my user-name and password for Win 7
Vista won't access to XP Home
3) Xp won't accept my user-name and password for Win 7
First can someone indicate the way to find the damn password on vista, please!
I can see all the computers and their nicknames through the network on the three on them...but nothing work even with WMP who sees the others WMP shared on the three computers.
I have a Toshiba Satellite running Windows 7 home pre and a desk top running the same. I want to network the two together so I can share external Hard Drives and such. I want to do this so the files can only be seen and or read by my two computers. I have a room mate who is also running windows 7. What can i do to make sure he dose not have access to my computers?
Both are connected to the internet VIA wireless connection. ( router in room mates room ) I have both computers connected together via a cross over cable also.
i am quite disappointed to see the lack of support for Microsoft's Virtual PC networking configurations. If there is anyone that can help me with this,I have Windows 7 Ultimate x64 as primary OS installed. I have also installed Microsoft Virtual PC 2007 (not Windows XP Mode). Inside this virtual machine, I have installed Windows XP Professional (x86). I need to have the Windows XP connect to Windows 7 via networking. According to most threads, I need to install Microsoft Loopback Adapter in Win 7 to be able to connect the VM to Win 7. I have configured the loopback adapter (on Win 7) to use IP 192.168.1.1, subnet 255.255.255.0, no default gateway and DNS server addresses. On the virtual machine, I have set the LAN connection to use IP 192.168.1.2, subnet 255.255.255.0, no default gateway and DNS server addresses. No connection.
im currently Networking a HTPC with my main rig, now i can pass info from one machine to the other but it will only see the Windows 7 HDD in the main rig..??, is there no way i can access the Vista HDD..??, or does it have to be the same OS to network..??
i tried to add a shortcut to the vista HDD into the user account on Windows 7, but upon opening it on the HTPC all folders are empty..??
I have been having problems networking my wifes computer ever since she got it. I want to share files and documents over the network and also stream movies from her computer but for some reason nothing can seem to find my wifes computer successfully. I have tried every setting under the sun made sure everything is exact and it still will not work.
I know it will more than likely be a stupid simple setting and aside from reformatting my wifes system and reinstalling windows I have no idea of what else I can do. I have managed to be able to get her laptop seen by my Desktop PC but it will not place it in the map and it puts it at the bottom saying the following discovered devices cannot be placed on the map. I have set up TVersity on her computer and that is not seen by my PS3 either.
I have no idea what other settings I can change on her computer to make it work. I have changed homegroups etc., and still no luck. I can see my system from hers but cannot access files and vice versa. Although I have managed to get some pictures off of her system but when it comes to video it says I do not have permission to get those even though they are all in the same folders.
