Monitor Do Not Get Signals From New PC?
Oct 4, 2012
When i boot up my PC, my monitor dos not get any signal. Its a new build, with a new case, mobo,cpu gpu and a SSD. got the PSU and ram from my older one.
The mobo is a ASUS P8Z77-V
The GPU is a HIS radeon 7970 ghz edition
The CPU is a i5-3570K
The SSD is a crucial m4 128gb
The case is a CoolerMaster HAF MX miditower.
So i me and 2 friends sat down to build the new system. Every thing is in palce, where it should be. think we checkt every cable and connector like 3 times, all was in place. We started up and all fans and lights in the case started. But my monitor says "no signal"
View 9 Replies
ADVERTISEMENT
May 20, 2011
Once I turn off my monitor and turn it on again my TFT monitor has problems to get input signals again from the (running) computer.It remains dark with an indicator "no input signal" and I have to reboot the whole computer to get everything working again.I think whenever a monitor is turned on then NORMALLY the monitor sends a "hello I am alive again" signal to the graphic card. The graphic card knows then that it has to send stuff to the monitor. In my case there seems to be no such "Hello" signal from the monitor->graphic card.On the other hand I could simulate by manual keyboard strokes such an signal and force the graphic card to resume sending signals.
View 4 Replies
View Related
Jun 20, 2012
I have recently bought a new pci wifi lan card (Ralink rt61 turbo) and have plugged in and installed drivers. Initially the drivers the company I bought it from told me to install didn't work, but after some googling found the correct drivers and downloaded from Ralinks website. However these didn't work either.
When using the Ralink wireless utility it says that the card is disconnected, however in device manage it is both connect and the correct drivers installed and everything is perfectly fine.
I ignored the wireless utility and hoped that windows 7 would still be able to use the wireless card as past experiences have shown to be true. This case however I get nothing. Windows 7 says that the wireless card is experiencing problems, it doesn't show any of the routers that should be shown.
View 3 Replies
View Related
Mar 1, 2012
I'm facing a problem in my windows 7. I'm using sony vaio vpcea33en laptop which obviously having a internal mic near webcamera, thing is mic doesn't pick signals. This I figured out when trying for a web cam chat in gmail. I tried disabling / enabling, start --> troubleshoot mic related problems; no use! I don't want to change my O.s once again.
View 2 Replies
View Related
Nov 24, 2011
I just picked up a new graphics card HD6750 for my HTPC. I am then connecting the HTPC via HDMI to an 1080p LED TV. How do I ensure that I am sending an 1080p signal to my TV? My TV manual states that the tv supports: 1080P 1920 x 1080P. So I know the TV can handle it. Do I simply set the Display settings to 1080P 1920?
View 1 Replies
View Related
Sep 24, 2011
I'm not quite sure what happened but my wireless card just stopped picking up a signal. I went and looked at all the cords there all plugged in correctly. I even pulled the card out put it back in and plugged all the wires back up to it. the computer picks up the card, the card just doesn't pick up any signal. the router is brand new i set it up i even reset it and it still wouldn't pick up a signal.s?
View 6 Replies
View Related
May 9, 2012
I have two HP desktop computers 4' apart..Both uses Windows 7 and are wireless. the problem: my wife's computer is changing screens even unattended (only when i'm using mine, which stays on the screen i'm using) for example, if i'm working in Excel, in her monitor appear my grandson photos or any other screen (unattended)....I discard the wireless function on the 2 computers and use the direct ethernet cables (verizon Fios router and modem) to see if that resolves..but problem persists!
View 7 Replies
View Related
Jan 20, 2013
I have a three monitor set up. Whenever I open up a browser, either internet explorer or google chrome on monitors 2 and 3, after a few seconds it automatically drags my browser into my main monitor(monitor 1, where my start button and status bar is located)
View 3 Replies
View Related
Jul 16, 2010
I have a setup with 6 monitors. Today my main monitor broke and I couldn't find a way to shut the PC down since I couldn't access the main desktop to get to the Start menu.Is there a way to change which monitor is the main monitor without having access to the current main monitor?
View 5 Replies
View Related
Aug 14, 2012
I am running a dual monitor setup with my TV hooked up via HDMI to my laptop.
Everything was working fine before, I always had the laptop as my main display yet I could play a video or a game fullscreen on the TV.
Since a couple of days, as soon as I put something in fullscreen, it immediately goes on my laptop, regardless if it's open on my TV or my laptop. I don't remember changing/installing anything that could've changed that...
I checked a bit in the AMD vision software and the Windows control pannel but I can't seem to solve my problem without switching my TV as the main display. I also made a quick search on google as well as here but the problems were mainly with Flash, which isn't in cause here.
Here are my system specs:
Toshiba Satellite L75D
Windows 7 home premium 64-bit
AMD Radeon 6520G
View 2 Replies
View Related
Jan 6, 2010
I have just did a clean install of Windows 7 ultimate from XP and I am unable to get my dual monitors to work like they did in XP.
I have a DVI Radeon graphics card plugged into the agp slot, and a Nvidia geforce vga adapter plugged into a pci slot of my dell optiplex 755. When I am in the screen resolution settings the second monitor cannot be detected.
In bios I have 2 options under primary video adapter and they are auto, and onboard card. When set to auto the Nvidia card gets a signal but the Radeon does not. There are no conflicts in the device manager, and all of the drivers are up to date.
When I change the bios option to onboard card the Radeon adapter gets a signal but the other monitor cannot be detected and in device manager there is a yellow exclamation mark next to Standard VGA adapter and a code 10 error that states the device could not be started.
I have powered down, and unplugged every cable, I also tried to use the integrated VGA adapter to the Intel G31/G33/Q33/Q35 Graphics Controller but the computer will not even boot. I get
"System Halted
Attention Unsupported Video Configuration Detected"
I have two monitors, both work fine as standalone but Windows will not detect either as a secondary.
Please help me someone, I am so used to having my helpdesk email open in one monitor and all of my other work in the other monitor.
View 3 Replies
View Related
Jul 4, 2011
This computer is running an ATI Radeon HD 2400 Pro. It does support dual monitors...(I've had dual monitors active on this card before, but never on Windows 7.) But since installing windows 7, I can't even get it to detect the second monitor. I want to run the setup with the CRT as the primary monitor and the HD as the secondary.
View 7 Replies
View Related
Oct 21, 2010
I recently had an older HP Pavilion Media Center m7760n Desktop PC rebuilt. The old power supply fried the motherboard so I need to get a new power supply and motherboard. Here are my current specs.
Mainboard : Asus P5QPL-VM EPU
Chipset : Intel G41
Processor : Intel Core 2 Duo E6420 @ 2133 MHz
Physical Memory : 2048 MB (2 x 1024 DDR2-SDRAM )
Video Card : Intel(R) G41 Express Chipset (Microsoft Corporation - WDDM 1.1)
Hard Disk : WDC (1000 GB)
[code]....
As you can see from above, the "video card" is actually integrated into the motherboard.The computer works perfectly except for one major problem. I have 2 monitors, one is 22" with 1680 x 1050 resolution and the other is a 15" monitor with 1024 x 768 resolution. At the back of my computer I have a VGA port and a DVI port. The 15" is connected to the VGA port and the 22" is connected to the DVI port.When first starting the computer, the 15" monitor was recognized as the primary monitor while the 22" was recognized as the secondary monitor. No problem. I simply went to the display settings and set the 22" to be the primary monitor and the 15" to be the secondary monitor. Unfortunately, this setting seems to reset as soon as I reboot the computer. The 15" is always set as the primary monitor on start up, forcing me to set the proper settings all over again. What's worse is that even after I have set the proper settings, they sometimes revert back when using Media Center or other programs. Worse yet, sometimes the monitors both go completely black ... as if the monitor settings were about to switch but got locked up some how.I'm assuming that perhaps the on board video has a primary port (VGA) and a secondary port (DVI) but even still, shouldn't Windows 7 be able to over-ride this and save these settings so that the monitor settings remain the same during startup and regular usage?
View 2 Replies
View Related
Feb 3, 2011
I'm using a television (32p) as a second monitor in extended mode so that I can watch a movie in the TV and play a game in the monitor (this was my main goal). Monitor and TV lays in two different ambients, both connected to the same pc, one by normal VGA cable and the other by HDMI. I managed to differentiate the audio output so that VLC player sends it's audio to the HDMI (so that only the TV plays it) and the rest of system sounds, media players and games outputs to the speakers (basically only the VLC audio is directed to another output device). I reached my goal so that I can watch a movie fullscreen in the TV and play a game in the monitor fullscreen too without any interference from one another (nor audio or video).
The thing is, because I have the TV in another ambient I can't actually see what's going on in it, as I just "throw" the VLC window to the TV from my main monitor. And here's the question: There's a way to see the TV's desktop in my monitor? Without having to set it as main monitor so to not really switch between desktops.. The perfect thing would be if I could see the TV's desktop in a window like in remote desktops applications.
View 4 Replies
View Related
Sep 27, 2011
I have AT&T DSL and it just drops out, I have a 2 wire router and the DSL and Internet lights will flash red when it drops, I have had this problem for almost a year and AT&T will run a useless test and tell me everything is fine. I have searched for 3 days trying to find a Broad Band Monitor to let me know when it drops and for how long, also how many times while I am at work, or just not on the PC.
View 2 Replies
View Related
May 5, 2012
i just got a dell optiplex 755 running windows 7 and i tried hooking it up to my tv to use as a monitor and it starts up and goes through untill it says starting windows (where its supposed to take me to log in screen) and then my tv just says not support but if i start in safe mode it goes through i just dont understand why it doesnt work i even tried lowering the resolution then hooked it up again and same thing its driving me crazy why it wont work i have a 32" HCT tv
oh also im using VGA to hook up since computer doesnt have hdmi out
View 7 Replies
View Related
Jan 16, 2013
Computer was slow and seemed to have too many things running all the time, freezing, etc. I ran Malwarebytes and Webroot Secure Anywhere; they didn't find any problems.So restored it to a week earlier then everything ran just fine for a few days. Now it seems to be doing it again. I went to Task Manager and found several items I can not clearly identify after searching online for them:Monitor.exe *32?
View 3 Replies
View Related
Oct 22, 2012
This may seem like an elementary question, but is it possible to run 2 PC's on 1 monitor (seperately of course)? If so, how would it be done since there is only one hookup to the monitor? Some sort of splitter?
View 2 Replies
View Related
Jul 8, 2009
I just d/led windows 7 RC and im having problems connecting to my 2nd monitor, the screen on my laptop is working just fine.
i have a HP - Pavilion Laptop with AMD Turion™ X2 RM-75 Dual-Core Mobile Processor with NVIDIA GeForce 8200M graphics
my monitor is a Samsung t240 HD
In device manager
Monitor is showing - Generic Non-Pnp Monitor
Display is showing Standard VGA Graphics Adapter
im not experienced with this kind of stuff at all.
View 8 Replies
View Related
Sep 11, 2011
Im using my gtx on my samsung led monitor And some times I use it on my 32'' led as htpc or sometimes play games on it My question is will the card heat up from this setting ? I only use one monitor and other one is turned off but the cables remain plugged
View 1 Replies
View Related
Oct 18, 2009
As the topic suggests, which one is better? LCD TV or LCD monitor?
Also, why in the world do LCD TV's have a lifespan in hours (ex 60,000 hours) associated with them?
What would happen after the lifespan expires?
Sorry if these are n00by questions but considering I am just now gonna shift to LCD monitor from my 2002 15" CRT, yeah I'm a certified n00b!
View 1 Replies
View Related
Jun 7, 2012
I use my TV as my desktop through an HDMI cable from TV to my Tower but because of lag is there any better way to set it up i've tried VGA that didn't make a difference so please could k of lag i know it's the tv as i tried laptop to tv would there be any settings on tv to stop this?
View 4 Replies
View Related
Apr 21, 2009
You have multiple monitors and even a TV hooked up to you PC.
Again if your like me you hate that MC locks the mouse so that you cant use your PC while MC has the floor.
Well Not Anymore...
I have found the best and most important tool I have for MC
and its called The Maxifer and yes its FREE
It will launch MC to what ever screen you choose Full Screen with out the Lock Down.
So you will be able to use you PC and run MC full Screen!
It just runs in the taskbar and with a Rt Click will make all your dreams come true!
View 8 Replies
View Related
Jul 17, 2011
whei i open my computer i cant see anything in monitor.what can i do?
View 1 Replies
View Related
Feb 7, 2009
I really love native resolution, but you can only go up to 1024x768 with a VGA monitor. Does anyone know where I could get a DVI monitor for, say, under $150 thats 15" or above?
View 9 Replies
View Related
May 16, 2011
When I connect my laptop to my LCD TV I can see windows 7 starting to load on the TV screen. As soon as Windows has installed the TV is not visible and windows can't detect it. Also some icons dissapear off my laptop screen.
View 1 Replies
View Related
Dec 19, 2011
Seems like whenever I use this specific monitor this BSOD occurs or maybeit's cause I have internet. Well, I got this issue after I built my computer and borrowed my friend's monitor and got internet, but whenever I don't use this monitor or this specific internet I do not come across this problem.
View 6 Replies
View Related
Apr 7, 2009
I have a dual monitor setup and my TV in another room as the third monitor.
Is there a way to set the two actual monitors up with a shared wallpaper and a completely separate wallpaper for the third monitor (TV)?
Or even a separate wallpaper for each screen would work...
View 7 Replies
View Related
Aug 26, 2009
I just completed the build of a new system and have the Windows 7 RTM software loaded on the system. Since the system is new I just have it connected to an old tube monitor which isn't so great. I was looking at getting a new 23 inch LCD that can do 1920 x 1080 but I'm wondering if I'm going to need a specific driver for the monitor or whether Windows 7 will see it automatically as plug and play?
So far one monitor I'm looking at only has a driver for 32-bit Vista and my machine is 64 bit. The other monitors didn't have any drivers so I'm worried about buying something now. Should I be concerned?
View 4 Replies
View Related
Nov 3, 2009
when I upgraded from vista premium 64 to to windows 7 (same) my 23" inch monitor developed a 1" wide black boarder there by reducing the entire size of the monitor how do I remove it, I hope I am in the right place with my question.
View 4 Replies
View Related
Nov 29, 2009
I installed win 7 on my laptop. After completing the instalation, I started with update all drivers through device manager. When monitor software was finished with updating, monitor have had a black screen. There is no signs of life after many times of switching off the laptop on switch button.
I have tried to remove drivers in safe mode, but f8 or f10 on starting up does not run. Simply, screen is black, as it is no part of laptop.
I remove the battery, but with no results.
Model of laptop is fujitsu siemens, model of monitor is samsung.
How can I resolve this?
View 2 Replies
View Related
