Locking Up On Boot Up / Just Started And Intermittent
Nov 18, 2012
In the last two weeks I have noted that my Windows 7 Ultimate 64 Bit machine will boot, looks good and when I log into a user account the Desktop shows, without gadgets or icons and just sits that way for seemingly ever. Can't break in and must power down. I log into Start Normally and it will boot correctly. This has occurred usually in my user account and once on a rapid restart on the Owner account. I have used chkdsk to see if it is a physical problem. Out of my league but this hasn't occurred for 2 years and just intermittently occurring.
View 9 Replies
ADVERTISEMENT
Jan 2, 2010
shortly after installing Win7 Ultimate, my computer started crash-dumping and locking-up with BSOD's, ran OCCT and all is well, Prime 95 runs and after an hour it stops the error is
FATAL ERROR Roundin was 0.5 expected less than 0.4
Hardware failure detected consult stress.txt file, so I checked it and all it said was there is a problem somewhere, OK so I was looking in the Windows debug file and I see the WIA file, so I am looking and it says
**************** Started trace for Module: [wiaservc.dll] in Executable [svchost.exe] ProcessID:
[3904] at 2009/12/18 22:12:46:244 ****************
WIA: 3904.5028 78 0 0 [wiaservc.dll] ERROR: CEventNotifier::AddEventGUID, Returning failure hr = 0x80070005
WIA: 3904.5028 78 0 0 [wiaservc.dll] ERROR: CEventNotifier::AddEventGUID, Returning failure hr = 0x80070005
WIA: 3904.5028 78 0 0 [wiaservc.dll] ERROR: CEventNotifier::AddEventGUID, Trying to register application for a unknown global event
WIA: 3904.5028 78 0 0 [wiaservc.dll] ERROR: CEventNotifier::AddEventGUID, Returning failure hr = 0x80070057
so what I am thinking that the memory has a problem- anyone have an idea if I am headed in the right direction
View 10 Replies
View Related
May 7, 2012
OS: Windows 7 Home Premium x64
i7-2600K CPU @ 3.40 Ghz
OEM
8Gb RAM
Asus P8P67Pro
Harware & software build around 6 months old
BIOS, Windows updates and Driver updates applied regularly.
A couple of weeks ago i had a BSOD. Since, when trying to boot, most of the time my monitor turns ON, OFF, ON, OFF, etc...for some time, very rarely leading to a successful boot. No problem accessing Recovery options or BIOS.sometimes (very rarely), it does boot up normally.I have tried everything i can think of (with my limited knowledge).
View 5 Replies
View Related
Aug 1, 2011
I am running Windows 7 on a Dell Inspiron 17R laptop. Inside the program "Dell Support Center" it tells me that BITS - Demand Started to Auto Started. I don't know what BITS is. It runs in the System Services. Should I disable the BITS?
Heres a screenshot: [URL]
View 3 Replies
View Related
Oct 9, 2011
I started a glary utilities and a startup manager to turn off some stuff, as my pc started to boot up kinda slow(i have a lot of stuff on it). I turned off some stuff but then i saw something weird and im not sure what it is. Should i turn it off, should i completely remove it, what the hell is this anyway? Here is the picture of startup manager and this thing highlighted
View 9 Replies
View Related
Jul 16, 2011
the problem i'm having is that .exe files are getting locked for around 5 minutes when other programs try to access them this means i can no longer access them for read write copy or delete. once they unlock they are deleted automatically.does any know what the problem is ? i am running windows 7 32 bit and have customized it a lot, by disabled unwanted services, i think it may be one of the disabled services that is causing the problem, but i don't know which one it could be.
View 8 Replies
View Related
Aug 18, 2011
I've been expirementing intermittent crashes on my PC and was looking to get some ideas of what my be the underlying issue. From what is happening, my immediate thoughts are this is a hardware issue. I have re-installed windows, on top of a freshly formatted drive, and the problem persists.
View 2 Replies
View Related
Feb 8, 2010
I have a M2N68+ with a AMD AM3 215 CPU, and had all sorts of issues with CTD, and BSOD's, been pulling my hair out, finally got disgusted and pulled the RAM out and checked the QVL list and it wasn't on there, as a word of warning, if you are having problems with the stability of the system, check the QVL list and see if you have the same problem. BTW my Gigabyte board runs rock solid no matter what memory I use, this is the last ASUS MB I'll be getting for a long time.
View 18 Replies
View Related
May 24, 2012
I've been having issues with Windows 7 locking up and failing to boot. At first, I could get into windows and it would freeze with an error message saying something about processes causing it to stop responding. The mouse wheel would just keep spinning and I couldn't type using the keyboard or even ctrl-alt-del out. I ended up having to hard shut down. When it rebooted, it wouldn't even load Windows and it would just stay stuck on the BIOS screen...I couldn't even F2 into the set-up at this point.I shut everything down and disconnected the SATA connections (the HDD and the CD/DVD). This time I was able to F2 into setup and checked the settings. I don't overclock and everything was set to default. I hooked the HDD and CD/DVD back up and restarted. I got into Windows Safe Mode. It ran through a driver install and had me restart. When I restarted...Windows came back up and immediately did the freeze thing again. Once again, I had to hard shutdown and it wouldn't go past the BIOS screen or let me into the F2 set-up.
I started up and shut down a few more times trying different sata ports with the HDD and CD/DVD. One time I got it back into safe-mode but most of the time it just stops at the BIOS start screen. I switched the RAM and reseated the video card thinking it might be a hardware issue.
View 4 Replies
View Related
May 31, 2011
Kind of a wierd one, at least for me. All of a sudded, whenever I type the letter"l" in any program, I get the blue locked screen. All I need do is hit enter or click the user icon( since it is not passworded) but does anyone have any idea what's going on here.Running Win 7 professional 32 bit.
View 7 Replies
View Related
Oct 16, 2011
I recently bought a Dell Inspiron 17R (N7110) that was on sale at Costco. It arrived on Thursday, October 13. However, from the beginning it doesn't always start up correctly. About 4 times out of 12 it got up to the "Starting Windows..." screen, but the 4 lights don't come together to form the windows logo (that's the startup animation). Each time I did a hard reset, and then it would ask if I wanted to run Startup Repair.First time: I think this was before I even installed any of my own programs. Tried running Startup Repair... which failed to start up, and I reset again.
Second time: Immediately following the first, I decided to run Windows normally without Startup Repair, and it worked.Third time: I decided to try Startup Repair again. It went through this time, and when prompted to try a System Restore I did.Fourth time: ...apparently that didn't work, because it happened again. This one happened when I started it for the first time this morning, 10/16. I noticed that the Seagate Drive was attached when I started it this morning. I did another System Restore.Fifth time: 10/16. Pressed F8 and tried to start with Boot Logging. Not sure if ntbtlog.txt recorded the failure, or only the following time when I tried to boot in safe mode. (Safe Mode did work the one time I tried that)
View 4 Replies
View Related
Oct 16, 2011
I have a compaq presario v2000. For the most part, my laptop screen says nothing like 'windows is non genuine', but there are some times when it does. The funny thing is , when I go to start, right click 'computer', click properties and see the computer information screen, the bottom part of that screen eventually says windows is activated, and after that the 'windows is not genuine message on the desktop goes away to reappear at a later date, maybe two or three days later
View 2 Replies
View Related
Jan 13, 2012
Laptop keyboard will lockup. It is a HP laptop model G72-259WM. I was able to hook up a usb keyboard to log into computer but it will also lock up when I tried to do some typing in Word. Uninstalled keyboard from device manager and everything worked ok for two weeks and it started acting up again. Had him uninstall keyboard again from device manager. For now it is working ok.
View 8 Replies
View Related
Oct 22, 2012
Just randomly, regardless of what my CPU, Memory, or Hard disk usage is, and regardless of how long the system has been running, it seems like at some point, every time the system hangs to a point where I can move the cursor and the numlock lights will still change when pressed, but that's it. Nothing else. I'll look down at my tower; no hard disk activity. All of my programs will show the hour glass cursor (in my case a spinning black and blue ball similar to the spinning beach ball in OSX (aside from the point.)A look at the Event Log shows these events occuring, some occuring at different times, but all of them occuring with the same Error Code of (7011): A timeout (30000 milliseconds) was reached while waiting for a transaction response from the Schedule service.That error has appeared shortly before each of the freezes it seems, and has occurred for these different services: NlaSvc, Ralink UPnP Media Server, CryptSvc, NIS, and Dnscache.I tried reseating my SATA cables, and so far the system hasn't hung again, but I'm a bit worried that my hard disk might be failing at the same time.
View 3 Replies
View Related
Aug 4, 2012
I built my system about 2 years ago and I've done my research and ran the memtest and stress tests and they all passed. But, I still get BSODs and it seems very random, if I'm listening to music, playing games, or just surf the net I get a BSOD now and then. It happens once every month but in the past week it crashed multiple times so I'm at my wits end.
View 4 Replies
View Related
Feb 16, 2011
Everytime a file is created in a particular folder it becomes Locked, I have not turned anything on, or changed anything, I even did a system restore to 2 days ago when this behavior wasnt taken place...I have assigned "Everyone" as permission to these files, but everytim a file is locked.why has this behavior changed, and how can i leave the file as "NORMAL" meaning no need to assign permission for eveery file that is created!
View 9 Replies
View Related
Oct 26, 2009
I'm rather new to Windows 7 but I've done my fair share of installing versions of XP and Vista to my machines and I've never run into this issue.
I have a Dell XPS M1330 computer with 3GB ram. I chose to install the 32 version of Windows 7 Pro from Vista Home. Everything, including Aero was confirmed would work when I ran the upgrade advisor. I did a clean installation after backing up all my files and loaded the most current drivers from the Dell website that were applicable to my serial number.
My problem is that when the OS is shut down or restarted PROPERLY, some drivers don't load properly and I'm stuck with a frozen home screen. I definatly know that my trackpad and video drivers aren't loading because the cursor will not move and the screen resorts to the lowest resolution possible.
However, if I do a hard re-boot by pressing and holding the power button, effectively triggering my safe-mode prompts, everything loads properly. It seems VERY strage to me that this would happen - I would expect it to either work or fail - not a combination of both!
I'm just curious if this is something anyone else has come accross - or if I should call Dell and make sure the drivers are current for 7 and try re-installing everything.
View 0 Replies
View Related
May 3, 2009
I've been working with windows 7 and I recently reformatted up 7100 x64.
I am noticing a new problem that I didn't experience in build 7000 x64. Basically my the screen locks up but I am still able to use the mouse and do things but the screen doesn't update. For example Im running FL Studio, and I load some module, then the screen freezes. Now I can still play sounds, exit software etc but nothing changes on the screen, its like clicking on a picture and navigating by memory. Eventually, the cursor disappears and I am forced to restart by holding the power button.
As I said, I have did a clean install of 7100 x64 the only other change is that I am using the 171.81 nvidia drivers instead of the older ones.
View 5 Replies
View Related
Aug 5, 2011
I'm experiencing intermittent monitor black outs which last for about 3 seconds before the monitor comes back to life. They occur randomly and I've got no idea what is causing them. It has only started happening since I switched to HDMI from DVI. I'm using an Nvidia video card and a BENQ monitor.
View 9 Replies
View Related
May 2, 2012
I wanted to hop on the SSD band wagon a few months ago so I grabbed a 64GB SSD down my local store.I'm pleased with the fast boot times and applications like Photoshop (which always used to take 10-15 seconds to open), which now open within a second.I have been having an annoying issue though since the purchase which has got me considering going back to my old drive. I have formatted and reinstalled windows and experienced the issue basically within the first few hours of the format, so i assume its the drive. Below are a few things I experience...
*I will be navigating directories and exploring files when all of a sudden the hour glass will appear and make me wait for 5-10 seconds before allowing me to resume doing what I was doing.
*This happens in all windows applications like firefox (while browsing webpages) or within photoshop while navigating in application menus.
*sometimes the application or windows menu will hang for a couple of seconds.. sometimes 30 seconds !
*I never experience any actual application crashes.. just 'hanging'
*If I ctrl+alt+del .. nothing happens UNTIL the computer decides it wants to 'wake up'.
*If I continue to do things while the computer is hanging, when it 'wakes up'.. it will 'fast forward' many of the actions I did while it was hanging (if that makes sense). It does this Intermittently.. sometimes I have a good hour.. sometimes it can be an issue for a few hours etc.
View 2 Replies
View Related
Oct 21, 2009
I have a backup drive on my computer (G drive). When G is unhooked Windows will not boot from the C drive. Is there something written on the G drive that's preventing windows from booting off the C drive?
View 5 Replies
View Related
Mar 17, 2009
In Media Center when playing a DVD about every 5 minutes the video will hang for a second and then go into slow motion and then catch up with the audio.
Its terribly annoying. If you know the answer, please share.
I have a HP 7680n (core 2 duo/2GB ram) with a kworld ATSC tuner and a 256MB Asus (ATI) video card using HDMI out.
View 1 Replies
View Related
Jun 2, 2012
I created a five year pro forma financial model for my business. The spreadsheet makes extensive use of worksheet formulas and macros. I also added a sheet to track actuals (numbers extracted, by hand, from QuickBooks monthly).Certain formulas in the spreadsheet are based on values that do not change over time. For example, I assume that my widgets will sell for some unit price and monthly revenue forecasts are calculated as the projected sales volume times the unit price.Here's the problem - let's assume that my sales price changes at some point in time, after sales revenue has been generated. If I simply change the price, which is applied globally, then the historical 'projections' will be wrong.Just to be clear: When the model was first built, it assumed that widgets sell for $100 apiece. Assume that unit sales are the same as the month number. Thus, my revenue for the first six months would be $100, $200, $300, $400, $500, and $600. Assume that for the first three months, I hit my revenue numbers. In this case, the sheet that tracks actuals would show a $0 difference, for each of the first three months, between projected revenue and actual revenue. Since business is doing so well, I decide to increase the price of the widgets to $150 on a forward-going basis. Suddenly, the spreadsheet now shows that I failed to meet projections for the first three months, when, in fact, I did meet them!It seems to me that there should be some way to lock cells in the spreadsheet based on the current date. For example, when I open the spreadsheet in June, I should be able to programmatically protect cells from May and earlier. Is this possible?
View 3 Replies
View Related
Oct 3, 2012
Have a legit windows 7 ultimate(sp1) from my work. I haven't updated in a while but I doubt that is the cause. I tried uninstalling or disabling kb971033 but no luck. I've also run malwarebytes with no luck. I've run hijackthis and I will post log since I am not sure what to delete.
View 5 Replies
View Related
Jun 12, 2011
this problem started yesterday, randomly last night my Computer just locked up, out of nowhere, couldn't click anything, mouse icon was gone, keyboard unresponsive when I pushed caps lock the LED didn't change and ctrl+alt+del did nothing either, had to hold down my power button and restart that way, when I did restart however everything was fine again.
Then today, I'm on my computer for 4-5 hours, I get this random lock up again, so I restart everythings fine...then an hour later, I get it again.
I haven't installed any new software recently, I did install the new windows update AFTER the lockups today though. I built my computer myself 1 year ago the specs are as such
CPU: i7-930
RAM: 6GB DDR3 1600MHZ Tri-Chan Corsair XMS3
PSU: 650W Corsair HX
Mobo: P6X58D-E
GFX: Radeon HD 5770 XFX 1GB
I'm not hearing any weird sounds when the system locks up (no beeping or anything to indicate any hardware issues) and it's 100% not a heating problem as on stress test my CPU/GFX doesn't go over 50/52 @ 100% for around 2 hours.
View 2 Replies
View Related
Apr 8, 2012
I came across some article some time back talking about how windows 7 will manifest itself inside the motherboard particularly the newer ones with the UEFI bios such that you will be unable to upgrade the motherboard at a later date and that it will also block installations of other OS like linux for example. Not that i have had to replace a motherboard before but starting with my new build im getting soon I'd like to keep my options open. What truth is there to these claims and if they are true are there at least ways to get around it; and then how do these fail "features" apply when win7 is running as a virtual machine rather than the host OS?
View 4 Replies
View Related
Jan 26, 2012
when sending mail with large photos windows mail keeps trying to send it and i cant cancel or delete it , and i cant open up live mail because its trying to send it ,
View 1 Replies
View Related
Oct 21, 2012
I have a Sony with win 7 64-bit and 4 gigs of ram. About a month ago I started to notice my computer running slower. When I checked windows task manager (performance) it was using 3.5 gigs of my memory. I restarted the computer and it went down to 1.5. I have on occasion had to restart twice to get the memory down. I have run virus checks and reg cleaner but it still occurs.
View 4 Replies
View Related
Feb 22, 2011
Having an issue with intermittent BSOD with no common activity. Decided to turn blue during idle, surfing the web and playing games. I am not over clocking but i do have the RAM set to what OCZ recommended, DRAM frequency to 1333Mhz, CPU/NB voltage to 1.2v, DRAM Voltage 1.65v, DRAM timings to 9-9-9-20. Currents set up is as follows.
View 11 Replies
View Related
May 8, 2012
My computer has been acting up of late. It's been freezing up at random times (even if I am running nothing). Trying to open up Task Manager, I don't see anything that could be using the CPU, but yet it says that i'm running at 100% capacity. MalwareBytes isn't picking up anything. Neither is Avast.Also, when I try to run anything Microsoft Office related I usually end up with a lot of lag. I'm not sure if these two are related, but I just thought I'd mention it.
View 7 Replies
View Related
Apr 6, 2012
I tried searching first but I seem to have trouble finding the proper terms to narrow the search enough... So I just post this.I put together a HTPC for 24/7 usage (windows media center and iMON remote control, spotify, PowerDVD for Blu-Ray movies). Minimal amount of additional software installed. The problem is it locks up often. The whole Windows 7 goes fully unresponsive (all you can do is power off -> on). It rarely stays responsive for 48 hours. No crash dump is generated. The event log shows nothing special, mainly two error items, one related with errors on Microsoft Security Essentials and the other is Circular Kernel Context Logger session failing to start.The main question is: what is there to do, is there a program that could monitor which other program seems to halt the system? I'd hate to go through eliminating each and every software/hardware component... The second question is: just in case, does anything below ring any bells what might cause the problem?
[code]...
View 3 Replies
View Related
