Locking Down My Backup Drive

Oct 21, 2009

I have a backup drive on my computer (G drive). When G is unhooked Windows will not boot from the C drive. Is there something written on the G drive that's preventing windows from booting off the C drive?

View 5 Replies


ADVERTISEMENT

Locking A Seagate External Drive With Windows 7?

Oct 24, 2012

I am running Windows 7 on my computer and have somehow used windows security to lock my seagate external drive. The computer can tell that the drive is there but I cannot access anything on the drive and also cannot write to it. I have tried talking to tech support from Seagate and they said that since I have used a third party program that I need to contact them. It is difficult to get a response from them. I am a novice when it comes to things like this.

View 7 Replies View Related

Backup External Drive Seen By My Computer, But Not Backup & Restore

May 25, 2012

I'm running Windows 7 64x Home Premium on a Toshiba Qosmio X505 laptop. I just got it back from the warranty repair center, where they replaced the hard drive and graphics fan & heatsink, and reloaded the factory windows version. Before I sent it out for repair, I used Windows Backup to create a backup of all my files on a Toshiba casio 500GB external USB drive (I had over 300 GB of files, so it was easier to use Windows Backup than drag and drop all the files, at least at the time). Now that I have the laptop back, I'm having trouble restoring my files. When I go to Control Panel-> Backup & Restore, a message appears in the restore section, saying "Windows could not find a backup for this computer." I've tried reconnecting the drive as well as restarting my computer, but to no avail. I can see and explore the files in My Computer, so I know the hard drive is properly connected.

View 7 Replies View Related

Use Windows Backup To Backup To A Network Drive?

Nov 1, 2010

Is there a way to use Windows Backup to backup to a network drive?

View 6 Replies View Related

Backup To External HD That Also Has Mac Backup On Same Drive?

Oct 21, 2011

I'm trying to backup Windows 7 to an external HD that currently is used to backup mac.eed to do to make this happen? I'm sure I'll have to format the ext HD then backup the mac using a different file format, but am unsure just what I'll have to do or how to do it.

View 4 Replies View Related

How To Backup FROM External Drive TO Main Drive

Jan 5, 2012

Windows backup is set up to not allow backups onto the C drive (or whatever drive windows is installed on), which generally makes sense. But I have a C drive with a lot of empty space, and an external hard drive that I need to back up. So... is there any way to get around the default behavior so I can back up FROM the external drive TO the C drive?

View 1 Replies View Related

Cannot Backup D: Drive Or External Drive F:

Jul 1, 2012

cannot backup d: drive or external drive f: both come up with the same message have tried chkdsk c: /f and chkdsk /x a no goer

View 1 Replies View Related

Drive Not Available In Windows Backup?

Jun 8, 2011

I have two HDD's installed on my PC. The 1st one is 500GB and has three partitions, in one of which Windows 7 is installed. The 2nd one is 160GB and has only one partition. I plan to use this one as a backup drive.

When I go to setup the Windows Backup wizard, in the list of partitions where I can choose to create the backup, it does not show me the 2nd drive partion. It only shows two partitions from the 1st drive.

How do I make the wizard display the 2nd drive as well?

View 6 Replies View Related

Backup With SATa Drive?

Mar 16, 2011

Having just bought a new PC i was left with a perfectly good SATA HDD which I intended for use in backups. The drive seemed to work ok until it cane to backing up! The drive was 320gb but when trying to back up it shows as only 47gb (not much good for a full backup).

View 3 Replies View Related

How To Backup Directly To Another Drive

Sep 9, 2011

Using windows backup, how can I back up directly to another drive WITHOUT creating the large "backup file" and then using restore on the file? I could copy the files over to another drive, but I want to retain the date modified/created data and copying over would just make a new copy and use the current date. I was thinking of cloning the disk but doesn't that clone the fragmentation and stuff as well?

View 2 Replies View Related

Backup Hard Drive

Oct 1, 2009

At present I use Vista and will be upgrading to Windows 7 o/a 22 Oct.

My total C & D drives use 110 GB so I would like to puchase something in that area and
it would only be used for emergency backup. I have looked at several but I noticed that
all of them only function with XP & Vista and no mention of Windows 7.

I would appreciate a recommendation that will function with Windows 7.

View 2 Replies View Related

Backup To A Network Drive

Feb 1, 2009

I'm using an HP media vault 2210 drive and I keep getting this error (0x8007007B) when I try to backup my C: hard drive onto the network drive.

View 9 Replies View Related

No C Drive To Choose In Backup

Sep 15, 2009

I cant seem to pick the C drive when trying to backup in windows 7 RC only my external drive and my two dvd-drives are available.

anyone know the answer?

View 4 Replies View Related

Backup To Flash Drive

Nov 10, 2009

I am looking for a good External HD, but most reviews indicate that they do not last too long and have other problems. I am proficient with a flash drive. I want to make a system image on an external drive, but a limitation of Windows 7 System Image is that you cannot put it on a flash.

If I download Acronis or another similar appl. would I be able to make an image on a flash drive?

View 4 Replies View Related

An Image Backup Of C Drive

Nov 11, 2009

I think that's what it's called. anyway something more then just a backup. One that you don't have to reinstall your software to get it into the registry.

Do I need special software? or is there a utility in Windows 7. If not what do I need to buy?

I just.. just finished Windows 7 installation. Now my D drive is failing. Both drives are the same make model and old, in fact they were in an older computer and almost everything in the pc was updated except the harddrives because they are more then sufficient in size.

So maybe I should replace them both. But I don't want to go through the pain of reinstalling. Anyway, I usually have to reinstall due to my husbands email "joke sharing" practice usually gives us a virus about twice a year.

This backup would be very helpful, I just never looked into it until now.

View 6 Replies View Related

Backup For SSD Boot Drive?

Apr 18, 2011

About to install windows 7 on an SSD as boot drive and programs/user folders on a hard drive. Does it make sense to have a primary partition on the hard drive being an image of the SSD so that I could boot from that partition in case of SSD failure?

View 6 Replies View Related

If A 64 Gb Flash Drive Would Be Enough Space For A Backup?

Jul 13, 2012

I would like to backup my files using Backup and Restore by Windows 7 and I was wondering if a 64 gb flash drive would be enough space for a backup? Someone told me that the program compresses the files, i do not know if that is true or not but, If I right click on local disk drive it states that I have used 178gb of 288gb. I would really like to Backup just my music which is about 27gb and some other stuff which is which is about 10gbs and whatever Windows 7 needs to back up. [code]

View 3 Replies View Related

[BACKUP] C Drive Is Marked As Inactive?

Jan 26, 2011

i not using english OS at the time, so i directly translated the message, but the actuall mesage is:The selected volume is on a dynamic disk when i select the location to save.hi, I so just reinstalled my os a few days ago, and today, i finally finish installing all the basic programs, so i opened up windows back up and select my data drive to backup on (D: ) but under it, theres that yellow triangle notification saying that the selected partition is on a active drive.for my understanding, active drive is only suppose to be my C: drive, so i opened up diskmanagement to check, and C: drive is actually inactive, but it is my system drive tried marking D as inactive with diskpart, but it doesnt change anything, it still says it is active, and if i mark C as active in diskmanagement, the OS wont load. So i put my Windows 7 disk back in and change it back to what it was

View 2 Replies View Related

Way To Configure Windows Backup To C Drive Only?

May 26, 2011

I have my C drive, another internal drive and 2 exterior drives. I have used Cobian backup for several years to backup documents daily. Just started using Win 7 recently and decided to use its backup for system files in case my C drive fails. My second external is new and it is 500gig. After the backup it only has 154gig remaining. Is there any way to stop it from backing up the other 2 drives? This is probably very simple, but i did google it and didn't find anything.

View 6 Replies View Related

Windows 7 Backup For All Stuff On C Drive?

Aug 18, 2011

I've been reading about win7 backup. It says that it wont back up program files, recycle bin and other things. I cant tell if these exclusions are only if windows chooses or also apply to when I choose. My question is: can I get win7 backup to backup everything on my C drive, and if so how do I proceed.

View 2 Replies View Related

Can't Backup To External Hard Drive

Oct 1, 2012

I'm trying to backup my data on my laptop to an external hard drive. Windows isn't recognizing it for some reason.

The laptop is an HP running windows 7 and the hard drive is an Eagle Cansus. Using the windows commands in the control panel don't seem to help.

View 3 Replies View Related

Backup A FAT32 Usb Drive In Windows 7?

Aug 17, 2010

got my new PC with Win7 64bit.I work from home and have all my work related correspondence on an external drive secured by Truecrypt. I used to back this up nightly with Vista without problem, but now I find that Win 7 won'tlet me.Does anyone know a way around this, or software that will do it

View 3 Replies View Related

External Backup Drive Connection?

May 15, 2012

My external backup drive is a SimpleTech StorageSync unit used with an XP OS. I recently purchased a Dell 64 bit desktop. Can I just connect the backup drive to the new PC or should I make other adjustments?

View 4 Replies View Related

Windows Backup To Drive With Data Already On It?

Aug 14, 2012

Got a new PC (Windows 7 Home Premium 64bit) with a 1TB drive. I added an extra internal drive which happens to be one of my old 300GB XP drives (231GB free). There are some apps on the old drive (Photoshop 6.0) which still run & I'd like to use them. Can I run Windows Backup and create an image on the old drive even though there are 70GB's of apps & files on there already?? Does the backup wizard partition or format the selected drive in the process of backing up? Obviously I'd like to keep accessing that stuff if I can.

View 3 Replies View Related

Macrium To Backup To A Network Drive?

Aug 24, 2012

my son set up a backup strategy. He has a Seagate GoFlex 2TB network drive that he planned to do backup with. It comes with software to backup files and folders, but not the system image. He has Windows 7 home which apparently can't do backup to a network drive. I see Macrium is recommended here. Can the free version backup and recover a system image to a network drive?

View 1 Replies View Related

Completing Boot Drive Backup?

Sep 26, 2012

I have a Windows 7 system that had a failing boot drive. Since I build all systems with a motherboard RAID-1 array, it survived one drive failure but soon started showing problems on the remaining drive. I have the usual knotty problem of wanting to move the boot drive to a new HDD, but complicated by the fact that the new drive is a software RAID-1 array.Most of the free and trial tools will not do a disc-image copy to a software RAID setup. I downloaded the trial of Norton Ghost only to find that its disc-image feature is not enabled in the trial copy. I used Ghost to make a complete backup of the failing boot drive, skipping bad file sectors, and restored the backup to a newly created RAID-1 array. After some mucking around with repair and boot disk settings, the system will boot, but stops short of giving me a desktop - I get only a blue background, with a Windows build notice (and a bogus-copy alert) in the bottom corner. I can call up Task Manager and switch logins to an incomplete desktop.

I really don't want to buy a copy of Ghost to enable the image-copy feature only to find that it won't work on my system... and I hate having to buy such software because my very infrequent uses of it mean I get about one use out of each license. I feel like I'm one simple step from getting my backup to run correctly... can anyone point me to what file or files might have been missed, and what files I can copy from the original boot drive to make things work correctly?

View 1 Replies View Related

Backup To Network Drive Runs Out Of RAM

Oct 1, 2012

I have been using Win 7 Professional, Backup and Restore sucessfully for almost a year where I have been backing up my computer (250Gbyte Sys Image and 150Gbyte User Folder) to a network dual RAID 2TB each hardrives. A few months ago, these backups failed to complete sucessfully, causing the computer to lock up. At first, I thought it was becuase I left the computer running for too many days but it seemed to lock up every Sun morning which is when I discovered that it coincided with my scheduled backup time. What happens is during backup, the RAM memory slowly increases until it gets into the mid 90%, the computer locks up and displays an error message, not enough memory.I have reduced my backup size from 150Gbyte to 50GByte and I still get the same result, I have completely started over with a new backup setup, selecting the network drive etc. No luck there.

View 1 Replies View Related

Backup To External Hard Drive?

Oct 10, 2012

I have been using a commercial company to back up my computer for the last 2 years. Now I have decided to do my own backups. I already did the first back up to the external drive. Now its time to back up again, when I back up again, will everything be backed up again? Or just the files that have changed?

View 1 Replies View Related

Using An IDE Hd For Backup Image From A Sata Drive?

Oct 10, 2012

I have a couple of these older drives in good condition is it possible to install one and backup my OS/image file from my sata drive, and be able to restore in case of system crash? Or should I get another Sata drive or usb flash drive instead?

View 3 Replies View Related

Backup RAID / Recover To New Drive

Jan 5, 2013

until recently I had an XP PC with a single main OS IDE HD. To backup I performed monthly an Acronis clone to an identical 2nd IDE HD that I bought for this purpose. Easy.
Now I have a Windows 7 PC with two identical SSD's in RAID0 as main OS drive and a 2nd internal HD. I would like to perform a backup of this system so that I can later restore it to any HD configuration I choose (for example a single SSD, or a single HD, etc). Is this possible or the restore will need to be done to the same original configuration (two SSD's in RAID0+2nd int HD)? What would be the simplest software that will accomplish this?

View 4 Replies View Related

The Drive Is Not A Valid Backup Location

Jun 15, 2009

I'm stuck in your "How to Create a System Image Backup in Windows 7". I (think I have a backup) on an 5yr. old 40g portable done with HDClone. Now I'm trying to follow your Win 7 Image Backup, I do have a few more older HDD's but I want to use a new 32g Corsair flash, but "Create a System Image" keeps giving me a

"the drive is not a valid backup location." Do you have any ideas if/how to get around this?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved