i have recently updated to windows 7 my cofig is Cpu intel E4400 ,GA945GCMX2 motherboard , 2 gb ram.when i do multi task, it always gives dump error all the time and the display driver also stops working..gigabyte has only lan and audio drivers for windows 7
View 3 Repliesi just finished my build and i have no idea why i went for a motherboard with 2 slots for ram it can hold up to 16gb but luckly ebuyer sent me out an extra 4gb of kingston hyperx ram so i have 8gb all together but theres a problem theres 4 sticks ! obviously i wouldnt want to send it back so what do ya think either upgrade my motherboard and smash the extra 4 gb in there or keep to my original one i dont have money to blow atall im really struggling if its something that will really make a difference ill go with it if not then ill just keep to my original and when i come to buy a graphics card i will get a 2gb graphics card to help with gaming?
View 3 Replies View Relatedwhat i need to know is: do i have to remove the heat sink from the cpu before I reinstall it into another mother board
View 5 Replies View Relatedit is necessary to change motherboard,ram,hard drive when changing processor from core 2 duo to i5?
View 7 Replies View RelatedI have a question about Windows re-activation.
If I change a motherboard/cpu in an Dell PC, will I still be able to use Windows 7 on that computer? I know that I can get the drivers loaded ok in safe mode, but will I need to re-activate Windows 7 to get it working again?
I read something a long time ago about hardware changes and activation, but I don't know if this will happen in this case. No big deal if I just need to ring up, but I wanted to check it wouldn't just break.
On a Win XP machine you could delete the registry keys under HKLMEnum as the last step before removing the MB and when the new MB was installed the Plug & Play would install the your hardware drivers and properly configure the new MB.Is there a similar process that will work with Win 7? There is no HKLMEnum key in Win 7 registry. There is a HKLMSystemControl Set 001Enum.
View 3 Replies View RelatedMy motherboard died on me, and so I had to change it together with the processor and RAM as there were no socket 775 motherboards available locally. However, Win 7 blue screens every time on start up, but very briefly, so I can't see the error message.
Win 7 repair then kicks in, but finds nothing wrong, so it goes round and round like that ad infinitum.
All the repair methods I have found require that you work within windows, which is patently stupid if you want to repair because you can't get windows to work - it's a bit like trying to open a box with a tool that's inside it!
I tried a new install, which has backed up my old Windows as Windows.old, and it goes though all the paces, but then refuses to accept the activation code.
I am now stuck with a non functioning PC, and am scared to add anything in the future in case of this type of thing.
915 motherboard intel support chipset motherboard sound, vga, usb drivers download
View 1 Replies View Relatedi'm not able to change the resolutions in win 7
View 1 Replies View RelatedI just bought a new case for my pc (CM Storm Trooper) and in the top front there is 2 USB 2.0 ports and 2 USB 3.0 ports build in (plus some other stuff) so i was wondering if there is a way that i can get the 3.0 ports working on my ASUS M4A77T Motherboard, which i don't think supports USB 3.0? Is there any adapter/PCI Interface that can make these ports useable?
View 2 Replies View RelatedMy motherboard info shows at the image on the bottom and I was wondering if I need to download drivers..
View 1 Replies View Relatedi have recently purchased an HP computer, that had Windows starter edition, i reformated the computer installed windows vista ultimate and then upgraded to windows 7, i have everythimg working fine, i managed to download most of drivers, my main concern is that card reader that i have in my computer doesnt show when i open my computer or computer,
that about normal mode, but the card reader shows in safe mode, thats wierd, and also these are generic drivers from windows 7, as i was unable to locate any drivers for card reader, may be you understand what my concern is, waiting eagerly for a reply. and my motherboard model no is (Foxconn MCP73M01H1).
Cpu i5 or AMD 1090t or whatever. I can pick out a motherboard that will support USB3 and SATA3 and of course I will have the 2 HD for them. I don't know crap about motherboards but when I pick one out to build my new computer what should I be looking at bus speed and so forth because I don't want to pick out a motherboard that will support them but is slow as mud so why bother so I want to do this right and another hundred here or there don't matter but I don't need a dragster just a Corvet. what I might want to take a hard look at on a motherboard?
View 5 Replies View RelatedI have a dell xps one a2420 computer that I am truly not trying to part with as of yet, is the motherdoard upgradeable?
View 2 Replies View Relatedhow to go about moving hard drives to a new mobo. My current setup is running on an LGA 775 socket, and it's got two drives, one of which holds games and the other has Windows 7 ultimate which I installed. I need to know if there would be any issues if I got a better 775 socket motherboard and transferred the hard drives over. Would everything on the secondary drive stay the same as it was and be a simple swap? and would i have to reinstall windows on the primary drive or would I just be able to type in the product key again?
View 9 Replies View RelatedI'm currently running dual monitors on my one graphics card. My motherboard has a HDMI port. Would it be possible to use that HDMI on my motherboard and get a 3rd monitor? I would like to hook it up to my TV just to watch video files off of my computer and maybe Blurays off my Bluray drive.
View 5 Replies View RelatedUntil a couple of weeks ago I was quite happily running my Nvidia 9400 GT GPU with no issues. Windows update wanted to update as it does every now an then and afterwards I get a black screen?? I switched to my on-board graphics everything is fine - I try the 9400 and nothing........ it gets weirder....... couple of days later I turn the computer on again and the 9400 is working again..... does so for a few days then black screen again I've been out today and bought a Nvidia GT 620 and plugged it into the motherboard but even that isn't showing up in device manager
View 2 Replies View RelatedMy PC is not working It turns on for five seconds, turns off for five seconds, then reboots but the screen displays nothing. I have checked the video card on a different PC, checked the HDDs, and the power supply - those are all working fine.I have assumed that the motherboard or CPU have died and need replacing (is there a way to find out for sure?).My main point for this thread: Could anyone please recommend me a really kickass motherboard, CPU, and RAM? I am also hoping to have one dedicated HDD for Mac OSX , so a processor/motherboard that will be compatible with Windows and Mac would be excellent (is this even possible?)have one HDD dedicated Mac OSX so I can use Final Cut Pro and avoid spending $2000+ on a Mac Pro.
I was recommended this processor: Newegg.com - Intel Core i7-2600K Sandy Bridge 3.4GHz (3.8GHz Turbo Boost) 4 x 256KB L2 Cache 8MB L3 Cache LGA 1155 95W Quad-Core Desktop Processor BX80623I72600K
Looking for a Micro ATX 775 Motherboard with raid for under $75.00 and at most $100. I just can not seem to find one with raid support.
Needs:
DDR3 Support
1 Pcie x16 lane
1 PCI slot
About half a year ago my computer began to not always start. When I power it on, the fans will get power (they are directly connected to the PSU) and spin up.When it does start, LED's on the motherboard light up - fans drop in rpm and the system boots.When it does NOT start, LED's wont light up - fans stay at max rpm and screen keeps black.Keep in mind that when the system is up and running, everything works perfectly.It never crashes.It performes like it should in demanding applications such as games etc.Temperaturs on CPU and GPU are normal.It should not be a problem with the PSU as I have had the problem with different PSU's.One thing to note is that let's say I unplug the power to my additional HDD's the computer starts pretty much every time, but not always (9 out of 10 or something)With both my HDD's connected is when it starts to become more like 50/50 if it's going to start or not.I'm thinking there might be a problem with the motherboard, but I'm not sure since the system runs perfectly once it's up and running. If it was anything major I assume the system would either not boot at all or it would have alot of hardware related crashes.
View 9 Replies View RelatedI'm RMAing my current motherboard (Asrock P55 Pro) and CPU (i5 760) and am planning on purchasing an AM3 motherboard with a Phenom II x4 965.
Would I need to get a new Windows 7 Disk if I bought the OEM version before?
Which is the best motherboard to be installed on pc
View 2 Replies View RelatedHaving installed win 7 I get the following error message
"The drivers for this device are not installed. (Code 28)
Data error (cyclic redundancy check).
To find a driver for this device, click Update Driver."
The mother board is a MSI K9N Neo V3
Any ideas on how to fix, have looked on MSi site and no updates have tried reinstalling and nothing works.
845 motherboard VGA for windows 7?
View 1 Replies View Relatedi want to buy a computer which have i3 processor,4 gb ram,500 hdd and a intel mb.now suggest me some name of i3 supported MB..intel & others..
View 3 Replies View Relatedhow to get cd driver motherboard rc 410 1 1
View 1 Replies View Relatedhow can a motherrboard be affected by DVD, CD and any sort of hard drive?
View 3 Replies View Relatednot show motherboard dvd my window 7 64bit
View 1 Replies View RelatedI am going to change my motherboard and CPU. I only have a Windows 7 OEM that i already used with my first motherboard.Can i just change the motherboards and boot from my HDD to use the same Windows 7 licence, or do I have to reboot my computer and try to re-install my already used license?
View 5 Replies View Relatedmy notebook desktop icon all change to Microsoft word icon also the extensions change to LNK file (.lnk) except my computer and recycle bin icon, I used windows 7 ultimate x64?
View 2 Replies View RelatedI am building a new computer and confused by something. The new 1155 mobos seem to have video VGA and DVI ports, but no graphics chipset. Was wondering what this meant? Does it mean the chipset has to come from the intel chip or does there have to be a separate graphics card? If a seperate card, why put the ports on the mobo in the first place?
View 11 Replies View Related