Installing Windows 7 Over Network
Sep 8, 2009
I have the following:
A burnable disc (CD 700MB)
A network connection (I can connect everything)
A windows xp desktop
A laptop I want 7 on
So is there a way to install Windows 7 over a network without the installation media? I am too poor to go out and get a dvd-r even know I have the burner, and usb thumb drive is out of the question. I tried some pxe tutorials, but they require me to run linux on the host machine (the one sending the image)
View 4 Replies
ADVERTISEMENT
Jul 12, 2012
The thing is I don't know is how XP or OS deal with network printer. I have an application that directly request to network printer without judging the installation of the printer.So, after installing a fresh copy of XP if I run my application it add an network printer and start doing the process. where as my application failed completely in 7 Premium also tried to add network printer. While doing this, its gives an error. the snapshot of the error is given PrinterBehave | Flickr - Photo Sharing
View 3 Replies
View Related
Jul 18, 2012
I was following this http://blog.ryantadams.com/2008/02 [...] indows-pe/ guide and all was well. But after it found the DHCP server and said Press F12 for network boot service, I get this error.0xc0000001
View 1 Replies
View Related
Dec 12, 2010
when i try installing windows 7 on my netbook over a network it wont detect my hard drives
View 9 Replies
View Related
Dec 7, 2012
I recently installed Bluesoleil 8.0.356.0 on my pc and my network icon gives me a red x symbol even though I'm connected to a network or if there are networks available. I tried uninstalling and rebooting, but no luck.
View 9 Replies
View Related
Dec 4, 2009
while trying to update network adapter drivers on my gf's pc i had an error.
now i cant get it online.
ive tried using asus latest driver but it fails.
ive also tried a few older drivers.
but says not compatable with win 7
if i do a win 7 repair. will it reinstall the network adapter.
or do i need to do a full format?
View 4 Replies
View Related
Dec 5, 2011
I am on a Verizon FIOS wireless network. We have both a Toshiba and Sony computer. I downloaded the latest drivers for my HP Photosmart 6280 printer and was able to successfully install my printer wirelessly. However, no such luck with my Sony. I download the same drivers, and it goes through part of the installation, but at some point I get a message that 'the system cannot find the file specified', and then it rolls back the install, deleting the download.
View 6 Replies
View Related
Nov 28, 2009
Ok. so I'm trying to install this Intel 802.11bg driver on my Tosh lappy. (I am installing it from a USB Flash drive, since the machine has no network connections.)
I install in XP2 compatability mode, and the report is that the installation is correct. But on restart, "Windows could not find a driver for your network adapter".
Is there a workaround?
View 2 Replies
View Related
Sep 3, 2010
How do I installing something during the Windows Setup Menu's Installing features and Installing updates?
View 3 Replies
View Related
Oct 28, 2011
I have tried installing on 1 stick of ram, the old HDD is unplugged, have deleted the partitions, running bios in AHCI mode using 6gb/sec cable, when I look in the drive some windows files have been copied onto the SSD and it is accessable. It is a Corsair Force series 3 120Gb.
View 4 Replies
View Related
May 14, 2012
Unable to see home network computers in Windows Explorer Network screen.
I have a home network with 2 laptops and 1 desktop. The desktop I use as a "file server" in that all work done on the laptops is stored to the desktop. The desktop computer name is HAL. One laptop is fine and sees the network. The other just stopped seeing it; rebooted the laptop; rebooted HAL; did a number of refreshes without any luck. I opened EXCEL and found a worksheet that was listed that I knew was saved on HAL. Was able to open the file and when I tried the SAVE AS I could navigate through all of HAL just as normal. Went to Windows Explorer and still no HAL listed as a COMPUTER on the NETWORK. I have a internet connection so I know I am making it to the router at least. And when I check NETWORK AND SHARING CENTER it shows an active home network. The laptop is running Windows 7 Home Premium Service Pack 1 Build 7601.
View 4 Replies
View Related
Sep 6, 2011
My problem is windows 7 hangs and freeze when access 2003 server Enterprise edition. This is not a small network, one of the biggest network.i have doubt on individual users on domain. before 2 months we had department wise users mean, for example Accounts@domainname.local. But after we created the individual users like john@domainname.local to all users. this is i believe the cause of problem. When we acess the server via the software it freezed for 5 seconds and then repeat to normal state. And after some time it hangs for 2 minutes.
View 5 Replies
View Related
Nov 2, 2011
Should I turn off network discovery on each Windows 7 pc in a domain network after mapping each pc to server shares
View 2 Replies
View Related
Aug 9, 2012
I have a peculiar issue where I would need to have "Network and Sharing Center" open to be able to see that my my laptop's wireless connection. I would see the signal bar and also see the dreaded red x.Even when I have it open, I can see it refreshing each second; like its losing connection and reestablishing.My internet connection is working and has no issues.
Network and Sharing Center - Open
Network and Sharing Center - Open and refreshed
Network and Sharing Center - Closed
View 3 Replies
View Related
Aug 9, 2011
I'm having difficulty trying to get my new Windows 7 pc set up to share files across my existing home (wired) network which consists of 1 desktop pc running WinXP and 1 laptop running WinXP.I want the 'C' drive on each of the 3 computers to be shared. I've had the 2 Windows XP computers set up and working like this for several years without a problem but I can't seem to get the 'C' drive on the Windows 7 computer to do the same.All 3 computers have the same workgroup name and none of them require passwords to log on to Windows. There are no problems with the firewalls on any of the machines.On the Windows 7 PC when I right click on the 'C' drive and select the 'Sharing' tab, I have set this up to be shared and when I click on the 'Advanced Sharing' button there is a tick in the 'Share this folder' box, the 'Share name' is 'C'. If I then click on the 'Permissions' button, this shows a 'Group or user name' 'Everyone' and this group has Full Control, Change and Read boxes ticked. As far as I can see there is nothing more I can do.
However from my Windows XP computer, when I go to My Network Places and double click on the icon for the Windows 7 'C' drive, I get the message "\Computername is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.The network path was not found"I've subsequently set up a sub folder (of the Windows 7 'C' drive) for sharing by right clicking on the folder, choosing 'Share with' and then selecting 'Specific people'. I then set up a group called 'Everyone' with read/write permissions. Now I can navigate to this folder from my 2 WinXP computers.
View 2 Replies
View Related
Jan 30, 2012
My rig uses a Centrino Advanced-N 6230 wireless mini half-card. It reports the correct name except within the wireless network list. Instead of 6230 it reports 6320. I searched the registry to see if I could find the error, but nothing found. It's only a nuisance, and a minor one at that.
View 1 Replies
View Related
Jan 23, 2013
This sounds really noobie of me but is it possible to improve local network transfer speed by adding a 2nd network card. I was planning to connect one exclusively for lan transfers and another one hooked to a separate wireless router.
Right now only a maximum of 3 users can stream SD videos off the PC before it gets a little choppy.
The pc in question runs on windows 7 and it's board has built in gigabit, I happen to have a spare gigabit card.
View 9 Replies
View Related
Aug 30, 2012
Home network with Wifi and ethernet. Using 3x Notebooks and 3x workstations. One of the workstations (W7 ultimate) keeps changing between Public and Home. When this happens, the internet connection dies. I cannot see other workstations either when on public network. Workstation using wifi. Does the same on cable. When it changes to Public, it disconnects from the internet and I cannot get to the router even though it has the workstation has an IP(DHCP or static). Default gateway and subnet is correct. TCP v4 is being used and nothing else is enabled.
Why is this happening?
- I have tried DHCP as well as Static addresses
- Reconfigured NIC(Netgear WG311T), uninstalled and reinstalled it.
- Removed Wifi connection and re-added it.
- Changed auth type, encryption type and keys to connection
Have I covered everything? The only thing different is that I installed a new router - Duo Plus 300wr. It cannot be the router because all the other notebooks connect to it wireless and so does my iPad, Android device and tablet...so it rules that out?
View 3 Replies
View Related
Feb 11, 2012
I disabled my network adapter then restarted and now the adapter is no longer showing up in my network connections. How in the world do I get it back? I have looked at other options (like under the registry which was suggested on a couple of places). I have never seen this happen before. I even reinstalled my drivers and still nothing. How do I enable it again?
View 7 Replies
View Related
Jun 7, 2012
how do i keep microsft explorer from trying to surf and find other providers and stay on one instead of showing every provider it can connect too ant2twon@yahoo.com
View 1 Replies
View Related
Dec 1, 2011
Today, I managed to redecorate my bedroom; where my computer sat on top of a shaky, wooden desk. That desk is now gone, caput, and replaced by a much bigger, sturdier and prettier glass replacement.Before I dissasembled the computer to re-decorate, I was able to browse the internet at ease. There were no problems at all...However, after the new desk was setup - and all wires replaced in their correct slots, I find that I am unable to connect to the internet, or even the house's network! For the past year, I have been wired to the router using a RTL8168C(P)/8111C(P) Family PCI-E Gigabit Ethernet NIC. It was plugged into an extension cord, in my room, into the Ethernet port in the back of my computer. Downstairs, it's twin was situated no less than 2 feet away from the router - plugged into the first port.Now, when I boot up the computer, the network notification presents the following message: "Unidentified Network. No network access", and sometimes presents a yellow ! next to it. So, I am reduced to typing on my mother's laptop - which has no problems connecting to the network.I am able to use the ipconfig /release command, but unable to use the /renew - it hangs in the command prompt, then tells me that the DHCP server cannot be located. The IP, beforehand, was reverted to 169.254.223.117 - before all of this, I was 192.168.0.5?
View 2 Replies
View Related
Aug 23, 2009
I have a linksys usb600n (v2) using the Windows 7 driver from linksys. It installs and is displayed correctly in Device Manger - BUT it doesn't appear in the Network and Sharing Center as an adapter. This same device and driver were previously working just fine in this system - but I rebuilt the OS (clean install) after testing a number of security products out.
The initial install went fine - no problems that I remember - just plug in the adapter and install the drivers obtained from Linksys (Ver 3.00.01.0). I tried the same thing on the re-build and it looks fine until I go into the Network Center and can't set up wireless networking since the adapter does not appear.
SIW shows TWO (2) linksys USB adapters under Hardware/Network Adapters, but does not show the network adapters in the Network Information section.
Any ideas?
View 3 Replies
View Related
Nov 1, 2009
Installed Windows 7 on two home-network computers. Everything appeared to be good, including networking, but I could not access printers (linked through each computer) with the opposite computer. Windows update offered an update for the Broadcom 802.11n network adapter, but when I installed the update I completely lost the network.
I had to revert to the old driver in order to reastablish the network. But the printers still are not recognized. The network adapter on the secondary computer is a Linksys WMP300N. I did try turning the router off for ten seconds with the updated driver but that had no effect.
Anyone had this problem?
View 0 Replies
View Related
Jan 14, 2010
How to Set the Windows 7 Network Location Type ?
View 0 Replies
View Related
Apr 19, 2011
Windows did not show any network connections in the network connections window. I tried everything that I could find online but nothing worked. As a last resort I decided to reinstall the driver for my Intel 82566DC-2 Gigabit network connection. I uninstalled the old driver and then installed the latest drivers but now I get code 31 (cannot find the driver software) in device manager and the connection doesn't work.
View 5 Replies
View Related
Oct 8, 2012
5 month old Dell XPS 8500 Win 7 64 bit Pro as main computer connected by Wired Adapter, Upgraded Gateway 5632E also running Win 7 64 bit pro as second connected by Wireless. Both running Kapersky successfully. no network problems for 5 mo.
Both were successfully linked using homegroup. Had to take Gateway to a remote location to do a business demo. While there had to link to a local public WiFi. While connecting made mistake and left homegroup.
When Gateway returned to homebase a few days later it was fine, had no problems finding wireless but could not see or rejoin Dell machine homegroup. It would let me set up a new homegroup.
Went to Dell box and found 1) homegroup no longer existed, 2) router and network and wireless printing no longer found - Red X on the taskbar) even though internet was still working fine.
Took nearly a week of trying differernt fixes, on adapter- off adapter- different adapter reboot network, router, even updated router firmware (Yes I went through every ipconfig reset, renew, redecorate etc. I've used netsh functions to try to get evrything to reset. Changes services.msc settings per other posts. Finally in desperation, deleted every sub key in the registry related to network locational awareness and got the Dell to find the network, let me set it up as a "home" network and then even see the invitation to join the Gateway's homegroup.
Then I hit a wall- when I try to join- Win 7 says I can't join the homegroup because the network is not a "home network". Of course troubleshooting is useless and goes into an endless loop. Have searched in desperation for any way to make Win 7 return to a clean slate so it can sense that it really is on a home network without success. Applied the fix-it and hotpatch for when Win 7 gets stuck in public mode. No joy. Deleted the hide wizard subkey as suggested elsewhere. No Joy. Gut feeling says problem must lie in the NLA or peer networking somewhere but where?
Does anyone know of a method or set of steps (short of a clean reinstall of Win 7) to completely clear every thing the OS knows about my network and force it to acknowlege my network is a home network? Is there a registry hack that will clear the problem?
I know I could abandon the homegroup and do conventional file/print share but I am concerned that using that solution won't last as whatever is screwing up the homegroup could eventually screw regular sharing and then I'm back to reformating/reinstalling. I'm just about ready to join the Apple folks so I never have to work on Windows again.
View 2 Replies
View Related
Nov 17, 2010
I want to add additional icons to the 'system32pnidui.dll' file. That's where you pick which icon you want to represent the active named network in the Network And Sharing Center. I did a search in this forum on 'network icons' but didn't find anything. Aside from all the permissions restrictions what app can be used and what kind(s) of files will work in W7? I have lots of .png images that I would like to use if they will work. Lenovo T500 W7 Pro-64 Current Updates.
View 1 Replies
View Related
Jan 20, 2011
New windows 7 Home Premium desktop that can print when the printer is directly connected but can't print when the printer is connected to an XP pro pc. It can see it but we're getting a "driver cannot be found on the network" flag.
View 9 Replies
View Related
May 12, 2011
Recently when I try and connect to the internet my wireless connection network says it is an unidentified network with no internet access. This never happened before.
View 2 Replies
View Related
Oct 22, 2009
Okay so I've installed windows and everything is working okay except i can't connect my laptop to my computer via LAN because it won't let me change it to a HOME NETWORK. It is just gets set to an unidentified Network. any possible suggestions?
Also I've look at removing this from the services but its not running it when i go under task manager, unless it somewhere else.
"##Id_String2.6844F930_1628_4223_B5CC_5BB94B87 9762 ##"
View 1 Replies
View Related
Nov 2, 2009
How to change network type to private network in networking and sharing centre with out showing UI to the user and it need to be done pro-grammatically.
View 2 Replies
View Related
