Install Both X86 / X64 On Different Partition?
Nov 27, 2011
I wonder what happen if I install Windows 7 x86 as main OS (C and create another partition to install Windows 7 x64. Will they have compatibility problem? I plan to install more than 4GB ram on my pc, but as I stated, my main OS is Windows 7 x86, and it will only recognized/read my ram capacity to 4GB, right. If I want to play games, I just restart my pc and boot to Windows 7 x64. Is it a good idea? Or any software or tricks that I can use (while I am using/active on Windows 7 x86, and switch to x64 mode without restarting the pc)?
View 6 Replies
ADVERTISEMENT
Oct 26, 2009
I bought Premium the other day stupidly forgetting about my Wireless Adapter (Netgear WG11v2) got home and found out there isn't any drivers for it not surprisingly really.
I made a 30GB Partition for 64 Bit install a few minutes ago. I want to dual boot just to see if there's any chance of the adapter working on 7. If it works will I be able to upgrade Vista and then delete the boot sector and that partition? Or won't it work because I'd have already used the product key?
View 2 Replies
View Related
Nov 14, 2009
ive an hd with 2 partitions, c and e, ive installed Windows 7 in e: can i make a second installation in c: with Windows 7? if i make a new installation of Windows 7 in c: i will be able to boot both os (the old Windows 7 in e: and the new one in c
what im afraid of is that after installing the new Windows 7 in c: i will loose the boot option to log in the old previous Windows 7 installation in e: but im pretty shure that i should be able to log in both Windows 7 cause the new installation will retain the second os boot option.. theres someone can confirm?
View 3 Replies
View Related
Dec 15, 2009
I have a new Dell Studio 1747 with Win 7 Pro 64.
I would like to do a fresh install of the same OS (Win 7 Pro 64) to a new partition to get rid of all the 'bloat ware' that came with my system. I want to keep the factory partition and OS in the event that I have problems with the fresh install.
Would I be correct in assuming that this case would be similar to installing XP to dual boot with an existing Windows 7?
Do I need to worry about losing the ability to boot to Dell's diagnostics located in a separate partition on the same drive?
View 2 Replies
View Related
May 7, 2012
I have a valid Windows 7 upgrade CD. But I want to install Windows 7 in its own partition and keep Windows Vista. I have a boot manager which can boot multiple OSs.
View 5 Replies
View Related
Jun 17, 2012
I have recently bought Asus G75VW and tried to install W7 DVD as i usually use to but I could not install W7 because it was a gpt partition= Disk 0 containes 4 partitions: 1=System 200MB, 2= MSR 128MB, 3= gpt 95,4 GB and 4=Data 118,4 GB. Disk 0 is a SSD.
Disk 1 is 750GB so thera are two seperate disks. How can I install W7 on my SSD? This must be the same problem for coming W8.
View 4 Replies
View Related
Jan 17, 2009
I have an odd problem - I have 2 drives - one SATA one IDE on the motherboard to choose from. Both blank. The install program sees them, apparently can partition them (let's me into advanced options), but when i select either one to install to, gives an error that it cannot create the partition.
View 6 Replies
View Related
May 15, 2009
I'm currently running the 7100 build and I'm wanting to install 7127 using a new partition.
Basically my idea was to create a new partition and install 7127 on that and then uninstall 7100 but keeping my files so I can move then across to the new partition. Thus having a clean install but without losing any files.
Is this possible? Will I be able to uninstall the 7100 without deleting my files?
Also can I change the size of the new partition after I have made it - in order to resemble the set up I have now (ie: 2x 250GB).
View 9 Replies
View Related
Jun 4, 2009
I'm trying to install a fresh copy of 7 RC onto a separate partition on my hard drive. Everything will go fine until I select the partition. This is the message that pops up above the next button:
"System was unable to create or locate an existing system partition. See setup file log for more info."
I don't know why it's popping up this message. I create a new 50GB partition in Vista (per Vista forum) and formatted to NTFS. Am I suppose to right click and mark as an active partition?
I have ACHI enable in my bios. I've also disable that and still a no go. I had 7 beta on with no problems.
Update #2: So I redownloaded 7 and burn it again at the slowest speed, still a no go.
Update #3: So I try to install 7 RC from within Vista. Everything checks out and it will let me select the partition that I want to install it on. I did not know that you can install a new OS onto a new partition from within Vista. So install is going as planned.
View 2 Replies
View Related
Jan 3, 2012
before this i have post about my problem on installing Windows 7 on HP notebook. The error is 0x800057(partition Problem), i already got solve with the problem but after few month the problem came back and now i try t o clean format the notebook , using diskpart but still got same erro
View 2 Replies
View Related
Jun 13, 2012
I started with a 250GB Sata HD running XP,and installed Windows 7 on it by booting from the CD.The drive had a first partition C: @ 40GB and a second, New Volume H: @ 200GB.I installed to the C: partition and noticed the option to install to H: partition,so figured all was good,as C: is where I wanted it-leaving H: for programs,documents,etc. Well,the install went smoothly,and everything seems to be working fine,with the exception of not seeing New Volume H: in My Computer.It is,however,found in Disk Management. I now have the following in My Computer
Floppy Disk Drive (A
Local Disk (C
DVD RW Drive (D CD ROM
Is there a way to make H: appear in My Computer so I can access the files?There currently appears to be no way to open it in Disk Manager.
View 2 Replies
View Related
Jul 12, 2012
I have a OEM CD from my manufacturer. I have two separate partitions in which I am going to be installing Windows on, one that is going to be connected to my Domain at my work, and then the other section of Windows that would be for my own personal use. Using the OEM disc would be the easiest to install it and then use my Windows Anytime Upgrade on to get it running on Ultimate and connect to my domain at my work. Thing is, when I go to run the OEM CD, it gives me three options for installing the OS and all on my hard drive:
Recover Windows to first partition only
Recover Windows to entire HD
Recover Windows to entire HD with two partitions
I'm trying to find a way to install it without erasing all of my data. The first option seems like it would work perfectly, but how would I know which partition on my computer would be the technical "first partition"? I searched around a bit to see if I could find a step-by-step guide or possibly even a picture or maybe what even happens after you tell the process to start, but I couldn't find anything.
Anyone have some experience with using a OEM CD and could tell me what would happen or what I could possibly do? Trying to do this on a ASUS-G72GX
View 9 Replies
View Related
Sep 20, 2009
After clean installing Windows 7 to second partition dual booting with XP, I notice that the Windows 7 paritition is marked "logical drive" in Disk Management. XP is marked primary active.
Are there any reasons why an OS should not be installed to a logical drive?
View 5 Replies
View Related
Jan 15, 2013
I have a new HP laptop with Windows 8 installed, I reformatted the primary drive with Windows 8 on it and when attempting to then install a copy of Windows 7 it states "windows cannot be installed on this disk. The selected disk is of the GPT partition style"There is about 5 different partitions all labelled things like "system reserve" "backup partition" etc and every single one of them seem to give me the same issue.I gave up and went and got a copy of Windows 8 to just put it back to what it was, and now its giving me the same error even though its the same copy of Windows 8? I've been reading many forums regarding how to get this to work but no luck. I tried gpart live which gave me some error when booting so I'm really lost in what to do?
View 4 Replies
View Related
Feb 11, 2013
I reinstalled windows 7 today, When i got to the part where i have to format my SSD it wouldn't let me so i clicked "New" Then started the install.Once installed, I go to disk management and i see "100mb EFI System Partition" Now, Before i re installed windows i had just 100mb Windows Reservered, Why do i have this EFI thing instead? When i started up my PC Before it would take about 16 seconds, Now it's around 2-3 Seconds more.why it installed this partition and can i remove it?
View 1 Replies
View Related
Dec 31, 2009
I've Toshiba Notebook and Win 7 Home Premium x64 OS installed on it. I want to have Win Server 2008 R2 x64 also in my PC. I tried two options:
1 - Made VHD and tried to install in that, but it didn't. Gave error that Win 2008 cannot be installed on VHD.
2 - Created new partition but got error message that you already have max number of partitions, so can't make new partitions.
What do I do? Is it the problem due to Home Premium edition? If yes, shall I first upgrade my primary OS to Ultimate or Professional? I've already checked my PC for upgrade compatibility by Microsoft Upgrade Advisory and it says that my PC can be upgraded to Win 7 Prof or Ultimate.
Please suggest what do I do?
My ultimate aim is to run Win Server 2008 R2 x64 on my laptop - either in VHD form or in hard disk.
View 3 Replies
View Related
Mar 15, 2009
I have an older computer that is or was being used for Win XP Pro. I put a new hard drive that is partitioned with 25gb on the C drive with two other partitions of different sizes. I set the the hard drive as cable select (later tried as Master only)
Windows 7 in cable select saw all the partitions. When set to Master it only saw Partition 1 and the rest as unallocated which seems weird.
I have the boot order in Bios set as Floppy, CD Rom and then Hard Drive.
I have an external usb DVD reader for the install disc.
When i start the pc, then press to boot from CD, it sees the install disk and the install process starts. I get to the point to select where to install and I get this Notice:
"Windows can NOT be installed on to Disk 0 Partition 1"
I hit the more info button and get this notice:
"The computer hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the BIOS Menu."
It should boot to the hard drive the way I have it setup. At least it does for Win XP.
I was wondering if anyone has any suggestion as to how to get around this issue.
View 6 Replies
View Related
Jul 19, 2010
I'm trying to install windows 7 64bit OEM but in the custom install options i can't format the partition i want to install to. The partitions were created under XP on a secondary drive, which will now be the primary drive, XP will be wiped later and that drive i have actually disconnected for the time being. The only options i can access are "refresh" and "load driver"
I'm not too sure whether i need an updated sata driver controller (asus M2N AM2 mobo - nforce controller) or i need to make the partition active using something like the diskpart utility.I've looked at the asus website and there are no updated sata drivers for windows 7 or even vista 64bit, only a beta raid driver.
Or is it the partitions themselves since they were created under XP (although i don't think its this)I've found some posts on here with similair sounding problems but hoping someone with a bit more knowledge can tell me which is most likely to be the cause and save me a bit of time.
View 4 Replies
View Related
Oct 29, 2009
If you install win7 on a new hdd, I understand it will create a 100MB hidden partition to hold critical system files. What exactly is its purpose, compared to say, System Restore?
View 5 Replies
View Related
Dec 30, 2011
I've just built a new computer, and, because I can't afford a new HD as well right now, I'm trying to use a 600GB SATA drive from my old computer as the boot drive for the new one. Specifically, I have a 100GB empty partition at the beginning of the HD, and a 500GB partition with data on it that I want to keep. I set up the HD in this fashion in Windows XP with Partition Magic.The new build went perfectly fine, but, when I go to install Windows 7 on the 100GB partition of the HD I described, I get an error message saying that Windows can't locate a partition or create a new one. Both partitions show up just fine, and I am able to select the 100GB partition, but can't proceed any farther.
Initially, I had two HDs connected, and the other hard drive kept showing up as disk 0, even if I swapped the SATA connections, so I tried switching the order in BIOS, and then I just disconnected the other disk for now. So the 600GB drive, of course, is now showing as disk 0 with the 100GB partition as partition 1. But I still get the same error message.Also, I disconnected everything I could disconnect, including everything USB, even the mouse. Still the same problem.I'd really like to get this to work, but I'd also like to save the data I have on the 500GB partition. I don't have any space elsewhere to copy it to, so I'd like to avoid any options that would involve reformatting the entire drive. I realize, for example, that I could use DISKPART and CLEAN if all else fails, but I don't want to lose the data.
View 4 Replies
View Related
Jan 14, 2010
i tried to change the partition of my laptop but while in the process, i got an error. when i tried to reboot it, it already says disk error. so i tried to reinstall windows but after the "press any key to boot from cd" msg, i only get a blank screen. now i cant reformat my hard disk and cant reinstall any os on it. i even tried hiren's boot cd but i always get a blank screen after booting from it.
i cant also start the laptop on safe mode or even the last known good configuration. when i tried the safe mode, it says about the partition error (long lines of error like "partition (0)disk...system..." something. i am most certain that the cause was the erroneous or interrupted partitioning.
View 4 Replies
View Related
Nov 2, 2012
Does it matter if I install the drivers in the partition that doesnt contain OS? (ie, faster boot time) Because it took 8 secs to boot after fresh install. and it jumped to 18-21 secs after the drivers are loaded.
View 4 Replies
View Related
Oct 9, 2011
I want to install a Linux Distro on my laptop. I will post as much details as possible so that you can guide me about how to free up some space so that I can create new partitions for my Linux Distro.I currently use the Linux VM images in VMWare Workstation, however there are certain tasks I need to perform which require, Linux to be installed as an OS instead of running as a VM.I have an HP Laptop which came installed with Windows 7 Home Premium OS.
There are 2 partitions:
C: Drive (Windows Installed on this one)
D: Drive (Recovery)
DiskPart output:
Code: DISKPART> list volume
Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
Volume 0 E DVD-ROM 0 B No Media
Volume 1 G DVD-ROM 0 B No Media
[code]....
The column alignment is not proper, but hope it's clear that which is is the System Partition and which is the Boot Partition.Now, how do I free up some space on my HDD to be able to install a Linux Distro?I need about 25 GB of Hard drive space for linux including the swap partition.
View 2 Replies
View Related
Oct 28, 2011
I have a 1TB hard disk and I want to install win 7 on it only. I do not want to store any other data on it or use it for other purpose.
Is it better to partition into 2 parts and install win 7 in a small partition and leave the other partition empty, or is it better to install win 7 without partition the disk?
View 6 Replies
View Related
Sep 5, 2010
When I try to install XP, with 7 already installed, no partition is displayed. The only thing displayed is my external hard disk (though not when I unplug it) , when it lists a bunch of unnamed, empty disks.I have a 10gb partition listed as O and named XP Disk that shows up in win 7,but not when isntalling XP
View 2 Replies
View Related
Sep 7, 2011
Is there a way to install Windows 7 in a different folder than the default Windows and on a different partition than the boot. For example, I have XP installed on my Laptop that has 3 partitions C:, D:, E:. C: is my boot partition and D: is where I have XP install in directory D:OSWINXP and E: where applications are installed and data is store.
I like to install Windows 7 and have C: as the boot drive and install it on D: in the sub directory D:OSWindows or D:OSWindows 7.
View 3 Replies
View Related
Aug 18, 2009
I'm trying to install Windows 7 on an HP DV6-1253cl notebook from a USB flash drive and running into problems that are preventing the install. (Note: It's not the rig that is in my system specs.)
When I try and clean install Windows 7 64-bit over the existing Vista system partition (C), I get the following error.
"Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information."
Thing is, setup shows that partition as well as the HP recovery partition and an external USB drive that is also connected to this notebook and offers all of those as choices for installing Windows 7 onto.
Can anyone help me figure out why Windows 7 won't install on the existing Vista C partition and tell me how to get it to install?
View 9 Replies
View Related
Sep 6, 2009
I'm using a 500GB hard drive that is split in to 2 partitions. The primary partition is 50GB, primarily for the OS. The second is the rest of the usable space on the drive, and has all the photos, documents, etc stored on the computer. Today I decided to finally install the Windows 7 RC that I've had sitting around. I moved over any important information on the C drive, the primary partition, over to the D drive, the larger partition, popped the disk in, and in setup, formatted the C drive. I finished the install without incident, but upon getting in to Windows 7, found my second, larger partition, had vanished.
View 7 Replies
View Related
Sep 6, 2009
I installed windows 7, on the first boot I could access my D drive which is the drive that contains all media, files, resumes, etc etc etc. Windows 7 itself is on the C drive. I rebooted, and I open up 'computer' and now the D drive just says 'D: (Spare) NTFS' if I try to open or browse it says 'Access Denied' in a pop up window.
If I try to change the drive letter in disc management; 'Virtual Disk Manager: The parameter is incorrect'.
If I right click the drive and access security it says I don't have permission to view security and that I should try to take ownership. If I try to take ownership; 'access denied' Windows 7 literally stole all of my stuff. I suspect it's still in there but I cannot access it. The windows vista I installed on that drive as a work around incase I needed to grab drives and 7 couldn't get online, loads from that inaccessible drive, but cannot browse it. So i know it's intact and has the files on it.
Is there a way to brute force my way into it. it's my stuff and I want it.
I've been looking for how to fix this for around 16 hours now and have only found half tutorials and convoluted nonsense. how do i get access to my drive without formatting? I'm on the verge of turning into one of those people who just goes around spamming fbombs everywhere. I'm at my limit of sanity and patience with this. there was no reason for windows to lock it away from me in the first place.
View 1 Replies
View Related
Sep 25, 2009
I will be upgrading my Vista-64 bit OS to Windows 7 when I get my pre-ordered copy in late October. The laptop currently has an used partition to the left of the Vista OS partition (as seen by Disk Management). When I install Windows 7 will I be able to delete and/or merge those two partitions?
View 2 Replies
View Related
Nov 15, 2012
I have a Sony Vaio with two partitions, a main one that 412 GB and another one that is 39GB. The operating system is on the main partition (412GB) but I have been having a lot of problems with it so I want to install a new Windows 7 Home Premium version.
The problem is that I do not have an external hard disk drive and cannot afford one right now. I have the Windows 7 DVD that came with the computer (Home Premium 64-bit) and I also created a USB drive off of it, and will probably be using the USB since it's much faster and smoother.
Anyway, my question is how do i install Windows 7 to the main partition (400GB one) without having to format it? I am aware that I can probably install a new version of Windows in the same partition and then the old Windows will be moved to a folder called Windows (old) but in the past I have struggled with deleting that folder and it created more problems than anything
View 2 Replies
View Related
