Install XP Over Preinstalled Windows 7?
Dec 29, 2011Can I install XP over Preinstalled Windows 7?I don't like Windows 7.[url]...
View 3 RepliesCan I install XP over Preinstalled Windows 7?I don't like Windows 7.[url]...
View 3 RepliesI have a laptop which came with Windows 7 Home Premium 64-bit. I did not make recovery disks or record the COA serial on the bottom. The hard drive failed, I have replaced the hard drive, and would like to install and activate the same OS that came with the laptop. I do have the Product ID and the original pre-installed (OEM) product key. I have working setup disc for Windows 7, correct edition and architecture - but it's retail. I have installed it successfully, but activation failed with the original OEM key.
The problem is that the COA key on the sticker on the bottom of the laptop is unreadable because the sticker has been worn out. I can read some characters of the key, however, so I have narrowed the key down to a set of 384 keys. However, it is not practical to try each of those possible keys. I think if I had the COA key, I could activate it, but there isn't really a way to get it at this point.
Is there a way to activate with the OEM key, other than what I have tried (i.e. activating from inside the completed install.) ? I think I read once that if you have the iso of the setup disc and can edit the files and repack it, then you can change it from a retail to OEM image by editing one file. Is this true? If so, I think I will try installing using that modified image. Otherwise, are there any other options?
I got a Dell Inspiron N5050, Three weeks of use I started having allot of problems, I restored to factory, three weeks later, same problems came back but Five Times worse. I thought it was a thousand different things and I've found out now that. My issue is a Pre-Installed Corrupted version of Windows 7. Is there anything I can do, short of buying a new version of windows? I've checked for problems with hardware and software, it says there's none, I've tried anti-viruses [Mcafee], Spybot, System Mechanic, Malwarebytes, and all the windows and dell options, every time, everything comes up clean.
So I've no idea why I keep getting a Black Screen, why I sometimes Blue Screen, and why after a Black Screen sometimes it knocks my screen res down very low, or sometimes forces my laptop to zoom in 300%, When it black screens it disconnects my webcam, it sometimes disables my ability to connect to Web Pages, sometimes it disabled my internet, so I am dumbfounded, and after all that, I was told it was a Corrupted Version of Windows.
I have 2 brand new Asus K52JT laptops with the following specs:- i3 380M- 4Gb DDR3
- HDD SATA II 750Gb- ATI Radeon 6370M 1GbThey both came with Free Dos installed.On one of them I have successfully installed Windows XP , tweaking the bios to use the ATA instead of the AHCI controller. Generally the drivers work fine except for the card reader witch doesnt want to install. Being pleased with the results I have decided to leave the first laptop like this and experiment a little with the other one.What I want to do is use nLite software to inject the SATA drivers into an Windows XP installation iso to enable the AHCI controller and install.Then, if everything works fine I would like to install Windows 7 x64 on another secondary partition as the second OS.The problem is that I am not sure witch SATA drivers i need and from where to procure them.My question would be if anyone has tried something like this before and if there are any general rules or knowledge that i should be aware of.
I have a toshiba mini notebook that came with preinstalled windows 7. I hate what MS has done to wordpad. Can I get a copy of windows xp and some how override this peice of dog dung. I've used wordpad for everything
View 14 Replies View RelatedNew laptop with Win7 pre-installed. No Win7 CD. Laptop HDD came with separate recovery partition. Burnt recovery CD and backed up HDD to seperate USB HDD. Then laptop was dropped. Laptop won't boot past blank win7 desktop(with curser). Tried running HP recovery program from recovery CD but program says no recovery partition found and once again, will not boot past blank Win7 desktop. Can't get to chkdsk to run HDD fix.
With the Win7 stuff that I have, I can't get to any point where I can even determine if this laptop HDD is fixable? Is there a Win7 iso file that I can download to boot into Win7 so I can then run chkdsk and then access my backup original installation on my USB external HDD? If not, can I use one of my old original Win XP CDs to boot the laptop, run chkdsk or maybe even reformat the drive NTFS, and then install my backup Win7 setup from the external USB HDD over the now XP installed HDD?
I bought a PC with Seven Family 64 bit preinstalled, so I have a first legit number. I installed (clean install) on that PC Window Ultimate, retail bought, so with another (second) legit number. My question is: Do-I have the right to install (upgrade install) Seven (Family) - but I'd prefer 32 bit - on my portable with the first number, so the number from the preinstalled Seven (which I no more use). Would It Work? Would it be accepted by Microsoft Would I be able to use a 64bit number with a 32 bit Seven? And if it ever it is a validation problem, or it fails, would I be able to downgrade to my old Vista (without reinstalling all my application or so) I am a little confused with the difference between preinstalled licenses right and retail one.
View 9 Replies View Relatedrestore Alienware m11x theme that came preinstalled?
View 1 Replies View RelatedI am getting an error "cannot install" 0x80070714 when I try to install windows 7 into a clean disk and the installation just stops..
View 3 Replies View RelatedAfter I tried to make a dual boot with Ubuntu and Windows 7 Ultimate (64-bit), Windows now does not boot. I have tried to reinstall and repair the HDD but the disc fails to recognize my HDD (Western Digital Scorpio Black 500 GB). My HDD is Basic, has 3 primary partitions and 1 extended (3 logical). Ubuntu 11.10 can boot fine.
View 2 Replies View RelatedPer microsoft I need to do try a repair install from original disk. Is there a difference between running repair install from Windows or booting from original disk then selecting upgrade install? Is one or the other preferred? Directions say both attempt to preserve installed programs, but not all drivers, and both require reinstalling all the 60 or so windows updates released after my disk. so no differences there.
View 9 Replies View RelatedI've built a brand new PC and decided that I would like to install windows 7 64 bit on my SSD, I got a disk+key from my university before christmas so that'd i'd be ready once i'd built it.
I built the PC yesterday and realised that I'd left my external DVD drive at my university accommodation, I'm at my parents house for christmas break so that's a few weeks left. I can't really wait that long so I used my parents laptop (which I'm posting from now) to turn the disk into an .iso and use the microsoft USB utility to make a USB stick that i could install from.
However when I tried the install gets to 'installing features' and gives 'windows cannot install required files' error code 0x80070570 I looked the code up on google which sent me to a lot of threads here, so far I've tried:
Taking all but 1 stick of ram out and the graphics card. Reseting the bios to default Installing again without rebooting after error. using cmd to select the right partition
First off this is a newly built computer, all fresh components. aftercleaning/activating the hdd via shift +f10 at Windows 7 setup,(which took me a day to figure out) i was very excited to see my hdd available for Windows 7 installation. as i proceed windows does its thing, after installing its time for the first restart. it restarts right back to the initial windows 7 setup ive done a lot of research, and majority of the problems seem to be the boot priority in bios. so i made sure that it was usb-hdd, then hard drive. (Windows 7 on flash drive for me, no dvd burner available). still the same thing, right back to initial setup. i tried maybe to remove the flash drive during the 10 second countdown to restart, but when it restarts, the windows splash screen comes up and then blue screens and restarts real quick. cant see what the error is on bsodthere have been a couple different start up issues, "windows did not start properly" "select version of windows to start from" (or something to that effect.) but its all the same outcome. windows 7 just wont finish installation
View 3 Replies View RelatedI'm working on a re-install of all components following a complete corruption of the boot sector on my drive which could not be fixed with repairs. The last time I installed everything fresh, I had no issues. Between then and now, there have been no hardware changes on my system, but now I am having issues installing the IDT Codecs. I keep getting an error along the following lines: Quote: ExitError: Error=Device Object not present, restart the system and run setup again. Running under compatibility mode, and running drivers from both the motherboard CD and the manufacturer website both have the same effect. The CD, when booted, says "This OS not support!" and only contains 32-bit vista codecs. ECS' website download indicates the IDT drivers as being compatible with Windows 7. Both do not work. It is almost as if the hardware "disappeared," despite the fact that I was using the drivers quite successfully till just 2 days ago, when the boot sector went kaput.
Windows has installed its own default set, which do nothing to power the 8mm jacks which I use with my speakers, but instead put sound through the HDMI, which is useless because I use a dedicated graphics card. I have tried uninstalling this codec and re-installing IDT, to no effect. Windows replaces with its own default codec.I have referenced this thread here, but offered solutions do not seem to work for me: Intel IDT Audio Driver will not install
How do I install a Super Multi Drive to a mini computer HP 110? I have the device and the installation disk, however, the computer does not seem to be detecting it or providing an installation wizard for me to proceed.
View 3 Replies View RelatedDoes anyone know whether there is a difference in performance between doing a clean install of Windows 7 vs upgrading Vista? Any better stability? I'm just wondering whether it's worth the trouble of the clean install.
View 3 Replies View RelatedNT Kernel & System rises to top of list in task manager and then just totally stops installs from proceeding. I have fought NT Kernel & System on 3 computers running Win 7 x64 ever since Win 7 has been out. No one yet that I know of has been able to solve the issue. I now need to install Java and can't because of NT Kernel & System stops it. I have tried everything on every forum and sites l find with Google searches. Nothing has worked yet.
View 2 Replies View RelatedInstall LG Super multi drive install disc for windows
View 1 Replies View RelatedI am part of a large organization that has a large amount of computers on our domain controller. I have Administrative rights to the computers only, and network access rights on our network. I keep a number of computers up to date, including various 3rd-party programs (i.e. java, flash, etc), and I currently manually remotely connect to each computer and install the updates to the programs from a network share, then run Windows update, select all the critical updates (as well as all the applicable optional updates), then disconnect and move on to the next one. Needless to say, time quickly adds up.
View 3 Replies View Relatedyou will need VISTA install disc and a windows 7 install disk..first upgrade XP to vista then upgrade XP to windows 7
View 1 Replies View RelatedI have seen a lot on clean installs but all guides are from like 2009. Is clean install still a way to install windows 7 with upgrade disc on a new hdd? since i have a hdd with vista on it and i have the licence how do i install 7 with the licence and a black hdd?
View 9 Replies View RelatedI get as far as connecting USB - Windows acknowledges the connection but then never finishes the installation. Downloading and installing a driver from HP site didn't help.Know that I had originally following HP's instructions and attempted install w/o CD and with the printer USB connected during first installation. This failed same as all subsequent installs. I'm also running XP mode on this machine but had not started XP at the time of printer install.
View 7 Replies View RelatedI now have a laptop running windows 7 and cannot find driver or a fix or a patch to connect my 'old' HP Laserjet 1012 printer.
View 1 Replies View RelatedI have recently finished building my computer and brought a copy of windows 7 (home premium) 64bit to go with it. But when I try to install I never get past "collecting information" where I am being asked to "Select A Driver To Install" as a driver for my "DVD Device" is missing (apparently). I assumed that the driver I needed would be on my motherboard driver disk. I clicked the disk and told it to "rescan" and it only said "There's no device drivers were found. Make sure that the installation media contains the correct drivers". When I navigate directly to the sata,raid & ide drivers sometimes I get a: nVidia nForce Serial ATA Controller on the screen but when I click on that it says the same thing after about 10 seconds or tells me it cannot install and I need to get a new driver from my distributor (I have tried the drivers of the Asus website but the same result). What do I do?
PC:
AMD Phemon X4 965 @ 3.4ghz (black edition)
2gb RAM
250gb HD (sata)
DVD-ROM (IDE)
Note: it's brand new and doesn't have an existing windows installation.
During the installation process of Windows 7 it is possible to load drivers, e.g. the downloaded SATA, LAN and Graphics drivers for a specific motherboard (MoBo ASUS P7P55D).However, these files are compressed zip files and Unzipping delivers a set of folders with in each a number of files. Which are the device drivers?
View 9 Replies View RelatedI plan on reformatting Windows 7 x64 due to some hardware issues. Basically, I would like to be able to have things like Windows 7 settings, themes, ect imported. Any tips on how to do this? I do have separate partitions/harddrives to backup files, program data, ect.
View 5 Replies View RelatedMy Acer 7736Z-4809 laptop (pre-installed w/ Windows 7 Home Premium 64bit, so I don't have the Windows 7 CD) was recently hit with a virus. I constantly got the BSOD "iaStor.sys" and a black screen. Startup Repair at first couldn't complete repair, but when I tried again, it found no errors. Tried System Restore to no avail. Was able to do a System Image Recovery using a backup on an external HD, but none of the programs worked (wanted to use Ad-Aware and Spybot to eliminate the virus). When I clicked on programs on the desktop or Start menu, nothing happened, didn't even get an "Open with." Even in Safe Mode, none of the programs worked. I checked the Task Mgr, and explorer.exe was still there, but RAID wasn't. Went to Control Panel Programs to uninstall/repair programs, but got message that programs seemed to be already uninstalled...it was like the programs weren't even recognized. Once in awhile when I clicked on IE8 in Windows Explorer (not via desktop shortcut or Start menu), IE8 actually opened, so I downloaded Hijack This and Avast anti-virus, but when I tried to install them, I got the msg: "Installation must be on a local hard drive."
Continued to get the "iaStor.sys" BSOD. I read to run Verifier and disable it, so I tried that (not sure if that made things worse). Tried to do another System Image Recovery, but this time it couldn't recognize the backup on the ext HD. Tried Startup Repair, and it couldn't complete repair. Went to Recovery Management to reset the OS, but my User ID(?) couldn't be found. Decided to do a Factory Install - during "Setup is preparing your computer for first use" I got the error msg: "The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click 'OK' to restart the computer, and then restart the installation." Every time I try to restart it, I get the same error msg.
I have an OLD computer with a 2.4 GHz processor and 1 GB ram, running XP 32 bit. I wanted to upgrade to Windows 7, So I tried to install 32 bit windows 7, knowing my computer couldn't handle 64 bit. However, at the end, it simply told me "Installation Failed" and reverted to XP, with all my files. I tried multiple times, then I tried installing 64 bit windows 7, and surprisingly, it worked. However, it is laggy beyond belief, so I tried installing 32 bit again. Again the installation failed. Now I'm thinking of reverting BACK to XP.
View 1 Replies View Relatedi cannot do anything with my laptop it restarted unexpectedly during install and i tried a windows 8 install but no hdd found what can i do?
View 9 Replies View RelatedI'm an IT student who got a free Win 7 x64 disk from my school, and I am unable to do a clean install. My system specs are as follows:
Intel Core 2 Duo 3.12 Ghz
nVidia GeForce 9800 GTX 512 MB PCI-e
320 GB Western Digital HD SATA
1 Gb DDR2 1066 MHz and 2x2Gb DDR2 1066 MHz SDRAM
I set my boot sequence to boot from DVD-ROM drive first, and HD second. It goes to the "Windows is loading files" screen and gets hung up. I started the process and went to watch TV for an hour, and it is still on the "Windows is loading files" screen. I haven't gotten any error messages. I've unplugged all USB devices from my computer as I have seen on this forum that it has worked for some people.
edited to add: I originally had only 2 Gb of RAM, and it got hung up at the "Windows is loading files" screen. I thought it was getting hung up because I didn't have enough RAM, so I bought brand new 2 sticks of 2 Gb RAM. I took out one of the 1 Gb sticks and placed both of the 2 Gb of RAM...for a total of 5 Gigs. And, it is still doing the same thing.
im having a hard time with fixing my computer's view how can i get it back?
View 2 Replies View Related