After formatting HD on ASUS Eee PC, installed windows 7 and downloaded Express Gate from ASUS website, installed it and selected the OS switch to start from express gate and always starts from windows, changed to the other possibilities of selecting which to start and does not work. How to make it work as before that on boot gave the chance to select either one.
View 2 Repliesi install windows 7 & i can't access asus express gate
View 3 Replies View RelatedI wanted to use my 180gb ssd as a boot drive and I do not know what to do. I installed windows and some drivers on the hdd but i want to start over and I need some guidance.I am doing a clean install now. once thats done how do i make the ssd the boot drive to make my system scream! also will i need to put drivers on both hdd and ssd?
View 5 Replies View RelatedI downloaded Vaio Gate for my desktop pc but I'm unable to add programs to it. When I drag icons to gate, nothing happens.
View 1 Replies View RelatedI tries installing Baldur's gate II, my favorite game, an hour ago and just after it finishes installing it says something along the lines of showing me a DirectX enabled movie just to test my video card.
Whether I click "ok" or "close", it opens the movie anyway in full screen. The screen goes black and I can't do a thing. No ctrl/alt/del - nothing.
I am forced to restart.
What could be causing this?
I recently upgraded my Sony Vaio to Windows 7 and now find that the Pro Magic Gate isn't reading my Sony Memory Stick Pro Duo, Mark 2.
View 1 Replies View RelatedI was browsing [URL]and saw that mass effect and mass effect 2 were 75% off on GamersGate (expires in two hours)Wasn't after I purchased it when I wondered to myself if I'm going to be missing out on stuff because I didn't get it through Steam...
View 4 Replies View Relatedi always have this problem... my ip is always 169.xxx.xxx and i want to manually set up my ip so i wont this problem..
View 4 Replies View Relatedi am not able to find drivers for my laptop for magic gate or SD card readers,both of these are not working.
View 1 Replies View Relatedhow do i make a rescue boot cd?
View 1 Replies View RelatedI know this isn't really where this should go, but I don't know where else it should go.
I have a hard drive that needs a firmware update. The update is an exe that has to be run from a dos environment running from a cd. how do I make a cd that can do this? I have tons of stuff, but the only cds that will boot don't have the exe, and modifying any dos boot image to add the exe makes it unbootable. I really need to do this, because the hard drive is useless without it. vockleya has chosen the best answer to his/her question.Click here to view the answer that was selected.
how to make a win 7 boot disk then add programs that are avaiable on this site and run them off a dvd to try and bring a Dell laptop that i purchased last year. also if there are other scanning software that can be recommended would be useful. I have some computer background, but not advanced. One last item, is there such a scanning software that can detect injected services that are hooked in win 7 to slow down your laptop?
View 1 Replies View RelatedI'm building a new computer and I heard that you can make a bootable windows 7 boot disk? It could save me $100+.
View 4 Replies View RelatedMy laptop takes longer to finish booting (60-70 seconds) than my slower desktop that boots up in about 35-45 seconds.
My laptops CPU is a Core i5 vs my desktop which is an old Pentium 4 HT. I've disabled the same amount of programs to start up on both so I don't know why the laptop is taking longer. how to improve the boot time?
i did a little researching last night to find out how to make my os boot faster, right now its a solid 40 seconds from pressing the on button to usable desktop. my rig is an i7 960, x58 gaming series with 12 gb of ram. followed a few guides on Internet that didn't make much of a difference that included setting the number of cores to 4 and max memory on the msconfig window. this rig came with a 64gb solid state which had the os on it, boot up was about a 1/3 faster and shut down took less than 5 seconds compared to now at about 12. i opted to sell it due to its immensely small size and stuck with the 1tb hdd which i then loaded win7 on myself.
any other tweaks you can recommend to get this rig to boot up quickly and shut down faster? there are tons of apps in the services start up that i really don't know what to do with and dont want to toggle them off, startup only has 5 required things that need to be active when booting up. outside of that, not sure what else i can do or if this is the limits of what win7 + my rigs specs can achieve. 40 second boot up seems slow on my 1tb hdd.
I would like to make my PC dual-boot with Windows 7 Home Premium 64bit version & Linux Ubuntu. I know about Wubi to install Ubuntu within Windows, But would like more space than the 30gb limit that Wubi uses. How do I create an partition with Windows that can be used for a dual-boot. doctorwhovian11-24144041650249291689021989539000 has chosen the best answer to his/her question. Click here to view the answer that was selected.
View 5 Replies View RelatedI have read many articles on how to make your computer boot quickly. I have tried several, but after a month or so they become very slow again. I have four laptops and three PCs in my home. While they are from different manufacturers, they are all no more then a year old and running Windows 7 Home Premium. With my Internet service I have Norton installed. My newest computer can take up to 2 full minutes, while one of the laptops can be as quick as 45-50 seconds. Specifically what is the magic formula or method of how I can get all my systems to boot up quickly and continue to do so in future?
View 29 Replies View Relatedhow to make (and maybe has the time to do it) a windows 7 boot screen of a walking and growling (roaring) bear? i cant find many animation makers that dont require me to draw it. i cannot draw very well at all.
View 2 Replies View Relatedis it possible to make a Windows 7 boot disc from scratch? By scratch I mean, I want all the programs I currently have installed on my PC and some items in my secondary drives to be there too, in other words, can I take my current Windows AND the programs/items I have on my drives, and put them together as one installation, so that when I format my computer and reinstall Windows, my basic programs, like Photoshop, After Effects, etc, are still there, so there is no worry about downloading it? That's my main point, I have to install Windows 7 and the programs I have in like 30 computers, it would take forever if I ALSO have to download programs like Photoshop, I don't have the best internet in town anyways.
View 5 Replies View RelatedI've recently been noticing some sluggishness in my PC, running Windows 7 Professional 64-bit.
[code]...
I have several HDD and one SSD. The SSD was my boot "C" drive and single win 7 OS. The SSD failed so I installed Win 7 on one of the back-up HDD. The install made that drive "C". I replaced the SSD and installed WIn 7 as a second OS on the SSD and it became drive "B". I can boot to either OS install on start-up but regardless of which install I boot with, drive "C" becomes the active system drive, even though the desktops are different (as they shoujld be for the two OS installs). SO, even if I boot from the SSD "B" drive, in windows disk manamgent it indicates that "C" is the "system" and "active" drive while it will indicate that "B" is the "boot" drive.
I want to format drive C so I can change its drive letter and reinstall Win 7 as a single OS to the SSD and make it drive "C", but windows will not let me change drive letters or format the current HDD labeled as "C" - obviously because it considers it the active sytem drive even when I've booted from the "B" SSD.
I've had a Windows 7 PC that's motherboard recently broke so I have been trying to use the hard drive with another PC. The PC I'm trying to put it into has all Windows 7 compatible parts. I get to the starting windows screen and it restarts the computer and gives me the option to Launch Startup repair. I launched startup repair and it says that it cannot fix the problems automatically. I can hookup the hard drive as a secondary hard drive and access all of the files on it but I cannot make it primary it just wont boot. The computer that the hard drive originally came from did not include a recovery/install CD.
View 1 Replies View RelatedI have windows 7 installed on a PC I built a little over a year ago. I recently upgraded to the windows 8 consumer preview, but I didn't like it so I'm trying to switch back. When I install windows it works fine, I can turn my computer off and on as many times as I want and it will be fine, but if I install any video card drivers or any of the updates that windows tells me to install, the next time it boots up I either get the windows splash screen or a black screen right after it says, "welcome to windows", or whatever it says. I have tried installing only my video card driver, I have tried installing only one of the recommended updates, but no matter what I install it doesn't work the next time it boots, so this isn't a problem with one specific driver.The only thing I have changed since I had windows 7 installed before is that I got a new SSD, but I'm still using my old drive as well. I have tried installing on the SSD while the other drive is unplugged and I have tried to install windows on my original HD while my solid state drive is unplugged. I have tried installing on both, nothing works. I have formatted both several times. I have also tried installing both 32 and 64 bit versions, both to the same effect.
View 7 Replies View RelatedI am thinking about dual-booting my system with Windows 7 as the main OS, and linux ubuntu as a secondary. I have a few questions:
1. How much space should I leave for ubuntu's partition?
2. How do I make a swap partition (or whatever it is called, for swapping files between OS's)?
3. Can I set it up to automatically boot into windows unless I am holding down a specific key, or something similar?
BTW, my HDD is ~500gb, but my current (factory) windows partition is 450gb.
A while ago I was using Windows XP Pro on my laptop. I was then forced to switch completely to Windows 7, but because I had so many application and configurations done on the XP, I created a VHD from it (using this) before replacing it. Now, I want to know if its possible to set that VHD beside my current OS as dual boot.I searched and found solutions, but those are either to add a new VHD (Windows 8 mostly) to the dual boot, or loading VHD in virtual machines.Also, if it is possible, can I copy the VHD on my external HDD and load it every time from there?The whole idea is because my laptop is not so powerful and it wouldn't handle VMs very well. Because of the same reason, XP Mode is not an option.Normal dual boot also is not preferred for two reasons:
1. I want my configurations which are already set on the VHD,
2. My laptop's HDD is only 150GB which does not have too much capacity left already. I can spare like 20-30GBs for XP, but I really cannot deal with the dual booting mess now! I will rarely use the XP for specific tasks, so VHD would be much easier if I will have the option.
I recently installed a SSD into my setup. I didn't have a Windows 7 64bit disk, so I booted into the HDD's OS and installed via .iso (I didn't want to burn it, as that always seems to fail.I wanted to get the System Restore partition installed on the SSD, so I tried booting to a Win 32bit disk and formatting the drive that way. Problem is, the System Restore is not recognized as such, and was visible so I ended up deleting it
that works fine, except I now have this:
Disk0: Hard drive
Disk1: SSD
Disk2: Irrelevant
1. Can I move the System Restore Partition to the SSD?
2. How can I make this boot off of the SSD? It currently boots off of the System restore on the HDD
3. The drive letters are screwed up, but whenever I try to change the SSD's drive letter it says "the parameter is incorrect", no matter which drive letter I choose.
I have two hdds (500gb 7200rpm) in my laptop and have 260gb of data on the second one. I wanted to create a partition for games at the beggining of the 2nd drive (the left side) as i heard it increased performance to put games in anoher drive and at the beggining of the drive.Will it make difference to make a partition at the beginning or at the end of this drive when it comes to gaming performance?My cousin showed me one game in the same drive installed in the 1st of four partitions of a 500gb 7200rpm (the same i have) performing with 3-5 fps more than that game installed in the 4th partition of that same drive....
View 9 Replies View RelatedI want to make a recovery disc to reset my entire 4 partition dual boot hard drive back to its current state. the recovery would reset both xp and win 7 which i have dual booting. can i make one single image to do this without it screwing up my boot loaders etc? what should i use? 3rd party software?
View 9 Replies View RelatedI have Win 7 installed on my netbook, for watching movies would be XP better. So I have divided the disk into 2 partitions, I have an installation file with Win XP on my disk... I have read some tutorial but still am not sure how to do that - as I do not have CD/DVD on my ntb (and an easy way, hot to repair a system)?
View 3 Replies View RelatedIs it possible to make a windows xp vhd boot from windows 7 bootloader ?
I need a how to if it's possible.
Is Outlook Express still available with Win 7?. I don't found it.
View 2 Replies View Related