There are about 40 computers on the LAN and all of them are Windows 7. AC DC is Windows Server 2008. So I wonder if it is possible to install the update (only this update) to all client computers on the network automatically?
View 1 RepliesSystem Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 4
RAM: 16294 Mb
Graphics Card: EVGA 550 ti sc
Hard Drives: C: Total - 114470 MB, Free - 60367 MB; D: Total - 240028 MB, Free - 229143 MB; E: Total - 236906 MB, Free - 199477 MB; F: Total - 114470 MB, Free - 100953 MB;
Motherboard: BIOSTAR Group, TZ68K+
Antivirus: Microsoft Security Essentials, Updated and Enabled
New computer above and my previous computer have Windows Updates for the same file with no KB number. Both computers have tried to install the update numerous times but fail. It says the file is Windows Internet Explorer 9. I get an error code 9C48 for which I find little info The new machine was put together April 11 and shows IE9 being installed on that date and I am already running IE 9.
Unable to see home network computers in Windows Explorer Network screen.
I have a home network with 2 laptops and 1 desktop. The desktop I use as a "file server" in that all work done on the laptops is stored to the desktop. The desktop computer name is HAL. One laptop is fine and sees the network. The other just stopped seeing it; rebooted the laptop; rebooted HAL; did a number of refreshes without any luck. I opened EXCEL and found a worksheet that was listed that I knew was saved on HAL. Was able to open the file and when I tried the SAVE AS I could navigate through all of HAL just as normal. Went to Windows Explorer and still no HAL listed as a COMPUTER on the NETWORK. I have a internet connection so I know I am making it to the router at least. And when I check NETWORK AND SHARING CENTER it shows an active home network. The laptop is running Windows 7 Home Premium Service Pack 1 Build 7601.
After windows recently updated on one of my win7 machines, i can no longer see the other 4 computers on my network. 2 win7 Pro machines & 3 XP, all in same workgroup. I can see the affected win7 machine from all the other computers and can even access its files, the affected machine can connect to the internet as well but i cannot see any of the others. Network discovery is on, but file and print sharing is not and when i click it on and say Save Changes, it does not hold the change; also under: my system settings-system properties-computer name the Network ID button is grayed out so i cannot change my workgroup name even if i wanted to. I am logged on as admin.
View 6 Replies View Relatedwhen i tried to install windows 7 ultimate 32 bit from dvd.i get this error windows could not update computers boot configuration.and setup closes.
View 9 Replies View RelatedI recently came to own a new computer, I've been using it for a while and set up Remote Desktop connection on it with Now i'm going back to my old machine to try and set it up as a media server. Its not going to have a monitor connected to it so i need some way to connect and see whats going on.Both machines are Win 7, although my old one is running 32bit.I have a linksys e1200 router and both are wired connections.it to the network so i can remote into it. I've set it up as best i could but it still wont allow me to connect
View 9 Replies View RelatedI just need to rename the laptop!Woo, that's all fine and dandy, except when I renamed my laptop from Ken-PC (the name shared by both laptop and desktop) to KenLaptop and rebooted, there was a whole slew of problems caused by the namechange. Very long story somewhat shortened, it looked like I was booting up win 95.Multiple error screens, very retro GUI, all fixed by renaming my laptop Ken-PC again.I'm just trying to be able to share my files between the two computers!
View 4 Replies View RelatedSuddenly, Windows 7 will only see one of the 4 other machines on my network. It was working fine a few days ago. I have tried uninstalling Comodo and everything else I can think of - same result. All other machines show all 4 other machines on the network.
My Windows 7 machine only shows one other machine, which is a Vista notebook. The other 3 machines that don't show up are another Vista notebook and 2 XP desktops. All machines can see the Windows 7 box and even print through it. What is going on? Why would one machine show up but not others??
I know that the Windows 7 Homegroups only work with other PC with homegroup.But I'm trying to find my other computers running XP with my windows 7 laptop.
View 9 Replies View RelatedI have two computers Computer A runs Windows 7 and Computer B runs Vista.I have gone through the set up of trying to link them. I have no trouble when I'm on Computer B seeing A.Problem lies in Computer A seeing B...When I'm on Computer A it does see the folders that I've set up on B but when I try to access them I get the message " YOU DO NOT HAVE PERMISSION TO ACCESS FILE //RALPH-PC// CONTACT YOUR NETWORK ADMINISTRATOR TO REQUEST ACCESS" Now does this mean I have to do something on my B Computer(Vista) or on the A Computer(window 7)
View 9 Replies View RelatedI have used the cmd command "net view" to attempt to list all computers in the network.However, net view appears to list only the computers that lie in the current domain.What command could I use to list all the computers that appear on the network, in any domain?I was even thinking of running "dir" on something like My Network Places or something like that but I don't really know how to do that.Is there a command I can use to list all computers and not just current domain?
View 3 Replies View Relatedi have windows 7 on both machines, where i am so far away from my router i have an alfa wirless adapter hooked in to it and i bridged the conections with my lan and hooked up a new router, everything works fine like the internet but when i try and view files on the network i cant see the computers hooked on the new network and they cant see me eather.
View 5 Replies View RelatedSo, I know this topic has been covered many many times, but this is slightly different.
I had all the computers on the network, a mix of XP SP3, vista and 7 pro of the 32 and b4bit flavors networked and working fine. All of a sudden, i can no longer see the xp computers from the Windows 7, and vice versa. So i thought maybe there was an update that changed the node type (it's happened before on a Windows 7 home comp in the network). All the nodes are hybrid, all still have file sharing and network discovery enabled and my LAN manager is still set to send lm&ntlm.
What's strange is that I can type in the computer name into the address bar and access it fine. But they won't show up on the network map. So, while for a techies like us, who runs IT knows how the users like to have everything the way it was...how to get all the computers back on the network map.
I have 2 computers, 1 a old desktop running on-board lan using a wired connection to my router. my laptop using wireless connection to my router. Router is a linksys wrt110. Ive had the problem for years and it wasn't much of a issue. The desktop orginally ran Vista x64 and my other computer ran XP so i just figured it was a problem between the two OS, But now both systems run 7 and now i still have the same problem.
The problem is initally this: My desktop can access my laptop but my laptop cannot access my desktop. Ive triple checked all network setting,made sure all sharing options are checked, made sure im in the same workgroup. But when I try to access my desktop via my laptop i get "Windows cannot access \0320-pc" "You do not have permission to access \0320-PC. Contact my network administrator."
Ok so there are 3 laptops, 1 desktop, 1 tablet, and one Cellphone connected to our home internet at any given time. However there has recently been a network error on all of them. The phone cannot connect to the iTunes app store and connecting to any page on the internet results in webpage not found error or dns error. same error on the computers. Have Scanned with anti virus malwayre bytes and anti spyware nothing comes up
View 2 Replies View RelatedI could 'see' my shared XP machine and my MacBook from my Windows 7 computer over my wireless network last night be cannot see them now. I can 'see' the Windows 7 from the XP machine on Workgroup computers but I cannot 'see' any computers from my Windows 7 network now.
I have seen another post like this but the solution there was to buy another wireless router but I just bought a new Netgear 11n router and it is working fine for Internet access.
We use a HP932c printer as our network printer but no other computers on our network can see it. Everything is set for sharing on Windows 7 and on the other computers which are running XP and Vista. Anyone have a clue why I cannot get the other computers to see the network printer. Also Windows 7's network map doesn't see any of the other computers on our network. When our dual boot computer(Vista/Windows 7) is in Vista mode all is fine but when I boot into Windows 7 it doen't see the other computers and visa versa..
View 2 Replies View RelatedGetting PC's running XP to show up in the Windows 7 (And Vista) Network Map.
View 0 Replies View RelatedI was just wondering; if i get a laptop that uses the same network as my pc , would they be in sync.
For example lets say at work i created files, edited some , created new images ext. when i go to home the new stuff on the laptop will be on pc automatically?
I have a home network that has been set up on a modem with internal router for ethernet ports and wifi. When computers connected to the modem via ethernet cables, they can easily discover each other through the 'network' icon. But when I connect my laptop to the network's wifi, only the desktop computer can see the laptop in 'network' and not the other way. The laptop can't see any computers. When I tried to connect/open the laptop through the computer, error code 0x80070035 network path not found came up.I tried pinging the computers (both with ip address and name), and heres what happened:-when I ping desktop to laptop, it didn't work-when I ping laptop to desktop, there was response. Then the desktop showed up on the laptop's 'network', and I can view/transfer shared files. desktop can also connect/open the laptop's shared files. Pinging from desktop to laptop also works.I've checked things like firewall, make computer discoverable in network, services. They all make no difference to the situation. Where unless if I ping the desktop from my laptop, the desktop won't show up and file sharing won't work.
View 3 Replies View RelatedI am trying to allow only certain computers on my HomeNetwork to access a network drive. My router is a BT HomeHub 3 and thecomputers are all connected by ethernet cables, the computer I don't want tohave access is wireless. The network drive is connected to the network using aUSB on the HomeHub. I can access the network drive OK on all the computers, butI don't want the wireless computer to have access. I have tried and tried towork it out, nut the more I look the more confused I get. I'm sure there mustbe an easy way to this problem. Any help will stop me having sleepless nightsthinking of how to do it.
View 3 Replies View RelatedI am connected to the internet fine and I have another second computer wired up to the router and I can access the files over the network fine, its been working fine now for about 8 months but just recently on the second computer I have noticed that the internet speeds have dropped right of to useless and it even constantly disconnects too. The main computer does not disconnect and it does not slow down, working perfect in fact.
The only updates/software that has been installed on the second computer are windows updates. I've even purchased a new router/modem thinking that was the issue but alas it is not. My wife also has a wireless laptop and that works just perfect too, so the problem seems to lie with the second computer and I don't know what to do to resolve it. It will connect to the internet but its dam slow and majority of the time is useless, its a wired connection via ethernet straight into the router.
Here's my setup:
* I am using a Blackberry to USB tether to my desktop (internet works on pc)
*Ethernet to WAN (from PC that has internet to wifi router)
*I get DNS is not responding now from any other computer connected to the network either wired or wifi
* Set up my network as following: Tether has internet sharing turned on and connected to Local Area Connection
* Local Area Connection has IP4 configured as:
IP address: 192.168.0.1
Subnet: 255.255.255.0
Default: blank
Preferred DNS Server: 192.168.1.1 (my ethernet connection so the internet connection is sent to wifi router)I have tried everything...I mean days of effort and searching. IP6 is disabled. Microsoft Virtual is disabled.This SAME exact setup was working perfectly a week ago with an older Linksys Wifi router. Then I bought a new Linksys E2000 and because I wanted something new (Bad move). That setup no longer worked on the new router....now it no longer works on the old router.
A while back I shared all my main pc drives on my newtork by right clicking on the drive in my computer then clicking the share tab. I then later un-shared them by unclicking the tab but all the computers could see the drives that had been previously shared from my main computer. They could even access them even though they had been unshared. I then later reinstalled windows7 on my main computer but the drives are still visible and accessable from computers on my network.
View 1 Replies View RelatedIrritating problem: When I fire up my systems, about 30% of the time one or more of the computers or the Network drive will be missing from the list of devices on the LAN and be inaccessable except from some programs. I have to power down all three computers then power them back up to get everything to show up and be accessable.
Configuration: Linksys router, WD Worldbook 1T drive connected via Ethernet, Toshiba laptop connected via wireless, two desktop systems connected via Ethernet. One desktop running Win 7 MSDN distro, other two running RC 7100. Computers use WD network drive for backup and Outlook 2007 mail. Computers and WD have fixed IPs. It appears that the cause was too tight settings on the COMODO firewall running on the desktop and the laptop, and possibly a delay in the wireless connection being established with the router and other systems.
I had restricted "system" and "taskhost" from accessing the Internet. When I changed the settings to allow all input and output from any IP, and delayed looking at the network devices for a minute or so, the problem went away. (So far - fingers crossed it stays away.)
Bottom line - if you're running COMODO, let it make the access decisions initially, then check the Network Security Policy rules after a few days to see if any of the system programs need a more relaxed setting. If you have a wireless system in the mix, it may help to wait a bit, until the router lights stop flashing at least, before checking on the Network.
Computer 1: Windows 2000 Pro. Drivers are all updated. Connection to router is normal (as in web pages load, for example).
Computer 2: Just updated to Windows 7 RC x86. Drivers are all updated. connection to router is normal (as in web pages load, for example).
Router is Linksys and DSL is pretty generic SBC/AT&T with filter on phone line.
Running an MMO (World of Warcraft) on both computers. This has never been an issue before. Since the update, computer 2 when attempting to log in is getting most of the way then failing and disconnecting. Trying to debug that on the MMO end, but the odd part is that it is killing the connection computer 1 has at the same time. This never happened when Computer 2 had Windows 2000 Pro or Windows XP installed - only since upgrading to Windows 7 this morning.
I'm about to try giving Computer 2 a static IP - something it has never had - but is there anything else specific to Windows 7 that I might want to check?
I am having some issues with my computer booting off the other computers here. I have a computer with windows 7 and it is booting the other two computers from our wireless connection, both of the other computers run Windows XP, and belong to others here, and when I use my computer it keeps booting the others offline and they have to reconnect and my computer ends up slowing their connection. Does anyone know why my computer keeps booting the other two computers off our connection.
View 4 Replies View RelatedI'm out of ideas. I've been running Win 7 on this machine for more than a year without issues in updating etc. Now it will not search or update/install critical items. I'm running Symantec (even tried turning the firewall off without any success). I get an error code 80072F7C. When I run hijackthis, I get an error message that my system denied write access to the Hosts file. I proceed with the scan but am unable to produce a log file. I've included a screenshot from the windows update error as well as the error I get when trying to run hijack this.
View 1 Replies View RelatedI am running Windows 7 on six computers. I can see all of the six and they can see mine. I have finally figured out through some internet research, how to get their computers to access mine. However, when I go from my computer to theirs, I get asked to enter a network password. All of the password protection is off. It's saying something I'm not understanding underneath the user name and password request boxes. It says Domain: and has my PC name on it. How can I get the access to go on their PC's?
View 5 Replies View RelatedI've got a Sony Vaio labtop I bought 10 months ago in the US. I'm in Australia now but have no international warranty. Sony tells me to send the labtop to Sony repair so they can look at it. They trouble shooted over the phone but it didn't help. Asked me to reformat the hard drive which I really don't want to do. This is the problem:
The computer works fine and I can connect and browse the internet with my wireless connection. However, as soon as I connect another computer to the wireless network (or if I'm in a hotel using wireless it also happens because other computer are connected to the same network) I get the BSOD.
The problem is that I cannot say exactly when it happens. SOmetimes it happens within 1 minute of being connected and browsing. Yet sometimes it takes 20min or maybe 45min. I don't think I survived longer than 1h though with 2 computers on the same wireless network.
I didn't notice the problem at first because I only used the one computer. So, I think the problem has always been there but I didn't notice it until I connected a 2nd computer.
To get the blue screen I don't even have to actively browse. I could just scroll down on a page and it happens without warning.
how do I configure the printer through the router so that the other computers can use the printer's scanning capabilities.
I have 6 wireless computers on a home network. My wireless router has an input to accommodate a printer. Currently the printer is connected to computer 1 via USB and all the computers can print from the printer as long as computer #1 is turned on.
My question is how do I configure the printer through the router so that the other computers can use the printer without #1 computer being turned on?