.I originaly partitioned my hard drive and I dual boot with XP and 7.I would like to know how to merge the two partitions back and just use Windows7.Just remember that you are not dealing with a rocket scientest here,hope to make it as easy as possible.
View 3 Replies
why i chose 2 partitions, i thought it could help me organize my stuff better.Now all my stuff is on OS C: Since it's split into two there is less space available..it's screwing with some of my programs that depend on each other.
View 3 Replies View RelatedI want to merge two partitions, D: (doens't contain nothing) with F: (my partition of backup, contain many files).But, is there any problem if the partition D: is on the left side of the F:? It's possible to do this with the Disk Management in Seven?
View 2 Replies View Relatedis it possible to merge these 2 partitions together? F into D? installed RAM is 4GB(2.99GB useable) <- can somebody explain to me what does this means? does another 1.01GB is wasted?
View 7 Replies View RelatedAfter discovering Speccy, I saw this and now I'm curious. Do I have one hard drive that was shrunk to have two 70 GB partitions or do I have two hard drives? If they are two partitions, can I merge them(formatting XP)?
View 4 Replies View RelatedI decided to delete my recovery partition since I can't burn them to disks because I don't have the appropriate program. So now, I have 10.88GB of unallocated space that I want to merge with Partition (C). How do I do this?
View 4 Replies View RelatedI just did a reformat/install of windows 7 home, i created a new partition to install the OS to(422.32 GB), after installing windows 7 to the new partition and deleting the "old installed OS" I tried to delete the partition and merge it back with my new "C" but the extend volume is greyed out and i cannot figure out how to merge the partitions back into one.
View 6 Replies View RelatedHow do I merge partitions? I have just install a new SSD drive as my C Drive. My old HDD was partitioned into two drives (C and D). How do I merge the partitions so that I have one partition (D Drive)
View 3 Replies View Relatedi've looked on Internet and the process of merging two partitions seems really easy. i followed the instructions to the letter but i cannot merge mine for some reason though. the option to extend the main partition is greyed out and i don't know why.lled windows 7 yesterday on my new computer and i decided a little later on to do a dual boot with ubuntu. the ubuntu inngs me to where we are now.
View 2 Replies View RelatedI have included a screen shot of my laptop drive. The C drive is nearly full but I have plenty of space on D . However when I shrink D the available space is after D. How can I extend C given this?
View 4 Replies View RelatedOne of my friends has a windows 7 computer with an account for himself, his mother and his 2 sisters. All the home directorys are stored in drive C. Partition D is shared. The question is, how to get a partition layout like this?
Partition 1: OS + programs
Partition 2: home partition for himself
Partition 3: home partition for his mother
Partition 4: home partition for his sister
Partition 5: home partition for his other sister
Partition 6: shared partition for some photos.
I recorded 4 videos, and convert it to mp4. That's irrelevant. Now, I want to merge those four mp4 videos into one, but I don't want to lose High-Quality. Just to merge, not to compress or anything else.
View 1 Replies View RelatedI'm using the dell inspiron 1545 with Windows 7 64-bit(C. I also have ubuntu installed in D:.
View 7 Replies View RelatedI have purchased a Sony Vaio laptop day before yesterday.I forgot to get the drive partitioned at the store and so decided to to it myself and i made a blunder.I wanted to allocate 60GB to C Drive and rest to the new Drive, but i allocated it the other way.But My when i open the My Computer, there is no partition as such although in Control panel it is being displayed as 50 GB free and upon right clicking I have an option to delete that 50 GB disk but i am not sure if upon deleting it whether i loose this space.Also my HD was 320 GB which now shows to be only 232 GB ( C DRIVE).Where have i lost this good amount of space?I have tried fragmenting but it executes in cycle reading % consolidation.Once it reaches 100 % it starts again from 1%.Thrice it happened and then i stopped the operation and did the restoration but i don't see any change.
View 1 Replies View RelatedWhen I right-click a .reg file, Open rather than Merge appears in the popup list.
[URL]
I want to merge my account into the main administrator account. The main Admin account is basically untouched and can be overwritten in the case of any conflicts.My current account is also an Administrator account. I'm trying to move it to the main one to be able to bypass the login screen. I can not delete the other Admin account because it is the main one and does not have the "delete account" option (however the Admin account I use and have all my files on does have the "delete account" option)
View 2 Replies View Relatedmy hard drive was divided into two partitions. The other half is working while the other half has no disk letter, file type and it cannot be formatted. Would it work if I delete the other half and then expand the working partition?
View 3 Replies View RelatedI have a 320Gb hard drive and made a clean install of Windows 7 Pro 64bit. During the installation, the recommended partition on my 320Gb hard drive was to allocate 50Gb for the system C: and the rest D: for data. Not being any wiser, I agreed to this and the installation continued. It is now only when the installation is complete (it is all working fine at the moment) and the programmes installed (incuding some heavy ones like Photshop and Pinaacle studio14) that the C: partion is very close to being full (only 7.13Gb left). There is, of course plenty of space on the remaining D: (over 200Gb). Is there anyway I can merge or remove the partion so that I don't have to worry about the C. disc filling up as I add documents or additional programmes?
View 9 Replies View RelatedIs there a program I can use to merge my monitors into one. I'm talking about getting the system to recognize it instead of 2 monitors at 1680x1050 it reads them as a single 3360x1050. I have a nvidia 4600, single card.
View 1 Replies View Relatedi need to merge file that was splitted into 1gb files but it failed (more than gb when merged)
View 7 Replies View RelatedRight now i have c: partition and system reserved partition which is 100mb and active bootable partition. How can i merge system reserved and "c" partition and make system bootable. When I am trying to merge those two using acronis disk director ,it says cant merge. [URL]
View 2 Replies View RelatedI've got Win-7 installed on my laptop. Since the space on C drive is very less, is decided tht i'll extend it. I had another partition (D) that had loads of free space. But when I opened the Disk Management tool to delete this partition, the option thr was not active.thr's some file in D drive that cant be deleted. I was trying to format the D drive, but that's not possible either. It keeps on poppiin some kinda error ""Windows can format this drive. Quit any disk utilities or othe rprogrammes using this drive and try again". I also tried to locate the programs runnin any files from here. But there are few processes that i cant kill.
View 8 Replies View RelatedI have a couple of folders that I want to merge into one folder. What is the best way to do this?
View 5 Replies View RelatedI will be upgrading my Vista-64 bit OS to Windows 7 when I get my pre-ordered copy in late October. The laptop currently has an used partition to the left of the Vista OS partition (as seen by Disk Management). When I install Windows 7 will I be able to delete and/or merge those two partitions?
View 2 Replies View RelatedMy © drive only has about 2GB left free for use but my partition drive/extra drive (E) has 90GB free,
My documents is the one taking up the majority of the room on the © drive, it is possible to operate my documents out of (E) drive rather than © or will this cause problems when using iTunes, installing programmes/programme updates etc.
Would there be any benefits or draw backs from moving it over to the (E) drive or would it be more hassle then it is worth?
I used MiniTool Partition Wizard Professional edition to merge two partitions and now my daughter's computer won't start.I installed a new 750 gb hard drive to replace her 320 gb drive. Everything was fine, but when I cloned her 320 gb hard to the 750 gb drive, it partitioned the drive so that 320 was allocated to the active boot system and the other 400-some were unallocated. I needed to merge both partitions so that all the space would be usable. This is how the drive was partitioned.B: System 199 MB --> C: Bootable Active 285 GB --> D: System Recovery 12 GB --> Unallocated 400 GB..MiniTool Partition Wizard will only allow you to merge two partitions that are next to each other, so in order to merge partition C with the unallocated partition I had to delete partition D.Everything was fine, but then MiniTool said it couldn't finish the merge process because partition C was in use. It told me to restart my computer to finish the merge process.I restarted the computer and now it won't boot. I download a Windows 7 64 bit recovery ISO and burned it to disk then popped it in the drive and restarted the computer but it still won't boot. I even went into BIOS settings and made sure that the CD/DVD drive is first in line in the boot order. It still won't boot.Not sure what to do from here. I'm a Mac user, my daughter has the Windows 7 computer, so I'm not exactly very well-versed in that operating system. Upgrading the hard drive on my Mac was very easy, no merging of partitions needed. How do I get my daughter's computer running and get the partitions merged?
View 6 Replies View RelatedI guess that almost says it all, except when I attempted to clarify this in an edit, I suspect what I am trying to do is a document merge with fields I would need to create on the document that has the labels, one file has all the data and the other has a layout of six labels.I have a custom label sheet (8.5" x 11" paper, 2 rows, 3 columns with margins) that I wish to use in a merge for name tags. The sheet is NOT printed, so I am not feeding it through a printer for the merge, I wish to do the merge on the computer and send the completed label merge file to a printer at a later date. Part of the reason for this is that I do not have a color printer here and the label picture itself uses color.Where it gets a little more complicated is that though each of the six labels per page is the same, it is a picture (when I double click any one of them the "Picture" ribbon comes up).
View 1 Replies View RelatedI'm trying to print out a christmas card list using mail merge in Word. I've entered the names and addresses and the list is fine but when I try to print the addresses on the envelopes, they don't align properly on the envelopes. I've tried different size envelopes from the list provided by Word but the only two that print properly are the size 6 3/4 and the size 9. Unfortunately, I cannot find christmas cards that size. I also tried the custom option on the envelope list to size an envelope but that doesn't work either.
On the menu, I've tried manually adjusting the position of the address block instead of using the auto choice but that doesn't work either. I use an H P C 4700 series printer and I am inserting the envelope properly (along the left side of the paper feed). I've also downloaded lotus symphony and open office in the hope that the printing would work in their wps but there was a file recognition problem. I have used Word 2002 and the Microsoft Word Starter 2010 and my printer works fine.
I have downloaded a small file that is supposed to make a few changes to the Windows Registry.My problem is that a number of folders are locked, since I upgraded from Windows XP to Windows 7.This little "take ownership" registry file looks fine, there is a tutorial attached, etc. but my problem is that the file does not get merged into the Registry. The file gets opened in Notepad. and that is all..I need help how to let the Merge function work and the opening of the file in Notepad to be avoided.
View 8 Replies View RelatedI've just upgraded to Windows 7 and have installed Office 2010 which I also had on Vista, in Vista however my email [URL]was part of personal folders, but now they are separate, I'd like not to see a separate menu for [URL] but instead have all my emails under the Personal Folders menu
View 3 Replies View RelatedI just spent like 18 hours copying 600K files, 1.33 TB, from a USB 2.0 ext. drive to a 1.36 TB USB 3.0 partition, but at the very end I got a handful of prompts to replace folders that already existed in the newly created folder, asked me to merge the original folder with the one just copied on the destination drive, eventually asking for permission to replace thousands of items and that's what it's doing now. I don't know what's going on. It appears that all files are there in both folders on each drive (with the exception of half a dozen that wouldn't copy due to long filenames).
Nearest I can guess is it is writing DOS names in addition to Windows names so the computer is going to spend more than a dozen more hours doing that. Windows Explorer copy wrongly offers to merge folders Windows Explorer copy wrongly offers to merge folders. The folder being copied that is being merged is called Drive(D), probably from a backup of Win 98SE being restored onto a Win XP machine, so it may resemble a system folder to Windows 7.
