I found out today that my disk dat transfer rate is only 5.9, which makes it a bottleneck, a chokepoint. These are the other scores:Processor: 7.2Memory (RAM): 7.2Graphics: 7.5Gaming graphics: 7.5Primary hard disk: 5.9So, obviously I should improve my hard disk. This one is Western Digital WDC WD30 SCSI Disk Drive. I need a disk drive with a subscore of at least 7.2 - 7.5, in order to eliminate the bottleneck
View 2 RepliesI am wondering if there is something wrong with my windows 7 ratings. My SSD is in perfect working order and everything is blazing fast, but for some reason I only get a 5.9 for a rating. I am using the Intel X25-V SSD. I get the advertised speeds across the board when I benchmark it so I don't know what is pulling down my ratingOthers are getting higher ratings with the same exact drive, and the drive itself is functioning perfectly and I am getting the proper speeds from it, so maybe it has something to do with W7 settings?Mobo: ASUS M4A77TDRam: 4GB Gskill DDR 1600 (7.5)CPU: BFG Geforce GTS-250 (7.0)Processor: AMD Phenom II X4 Quad-core Black Edition 3.2 GHz (7.3)HDD: X25-V (5.9)OS: Windows 7-Pro
View 7 Replies View RelatedI have a Dell XPS 8000 with a quad core, 8 gig ram, 7 pro, 6gb hdd and 6gb controller. I've tried SSD's that were 6gb and still having issues with slow performance. My main program is Arcview Mapping. I"ve tweaked the cache, I've put the Win swapfile on a second 6gb drive, tried 'no swapfile' so it all runs in ram, just about everything I can think of. We have gigabit nic, switch to switch, etc. It uses a lot of updates to the screen straight from internet, but local files should load faster. I have a copy on my local 6gb drive then sync to server at eod trying to r/o net latency. Majority of work is to/from local drive, but still can't wring out more speed. When I open Arcview, it takes 1.5 minutes to get to a workable screen. File size I'm loading doesn't make a diff.
View 4 Replies View RelatedI'm running Windows 7 Ultimate x64 on my Computer(...) and I have recently found a problem that's pretty annoying: The file copying is really-really slower than on Windows XP and I mean that if I want to copy a folder which is about 650MBs over to a USB Flash Drive it takes about 1 day(what??) and the transfer rate is like 300KB/s. I have tried to look for solutions on the Internet but they haven't turned out handy. Could someone please help me asap as I need to give the USB to someone in a couple of hours?
View 5 Replies View RelatedWhile running windows 7, I'm getting really slow usb 2.0 transfer rates 1.21MB/second. Is anyone else experiencing this problem?
View 8 Replies View RelatedLow disk space, Can transfer data on D drive to an external hard drive
View 5 Replies View Relatedi have been having this problem for about three weeks now and my transfer rate is very slow.... and at the end it even takes longer... sometimes it even gets stuck at somepoints but resumes after quite a while
View 2 Replies View RelatedI have a Vantec NexStar TX NST-210S2-BK Hard Drive Enclosure - 2.5" SATA to USB 2.0 wit a 120 GB Segate Harddrive in it connected to an Asus K61-IC laptop and my transfer speeds on all my USB Ports are acting super slow.Also, Just recently I've had a balloon tip start popping up in the taskbar telling me that if I hook my USB Devices up to a USB 2.0 Port it will run faster. I'm pretty sure that all my USB Port's are 2.0.
View 4 Replies View RelatedI have 2 PC's linked directly in a LAN.
PC1 is running Windows 7 Home Premium - 64bit
PC2 is running Windows XP Home Edition - Service Pack 3
Both computers have the same Workgroup PC2 has 2x Hard drives, one of which I have set up as a "Shared" hard drive.PC1 I have changed in 'Advanced sharing settings' - network discovery/public folder sharing/file and printer sharing turned on. Also �File sharing connections� is on �Enable file sharing for devices�..� And I have turned off password protected sharing.
i just notice that my usb transfer is really slow around 11mb/sec for my usb stick and around 20mb/sec for my external hard drive. I noticed this change right after installing SP1. (I'm on windows 7 ultimate 64bit.) The thing is that it happenned in a particular moment, i was transfering files to my external hard drive the same day i installed Sp1 and in the beginning of the transfer the transfer speed was normal, around 60mb/sec. Then my Internet security software (Eset Smart Security) tells me that a process has changed in i think it was taskhost.exe (i am not 100% sure but i know it was a windows process), it ask me do i accept it, i press ok accept the change and then i saw my transfer speed slowed down right away to something like 20mb/sec.
View 9 Replies View RelatedAs of recently (for the last couple of weeks) I noticed that the transfer rate to my external WD Elements SE 1TB drive is very very slow (~2MB/sec). This wasn't always the case, and the drive was much more responsive than that.
I searched about this topic extensively and the only thing I found was an issue with installing Windows 7 SP1 that in some cases screwed up the USB2 drivers. This was supposedly addressed by KB2529073 which is installed on my system. However, I'm still experiencing this ulta slow transfer rate.
I am copying files from a WHS 2003 to a back-up drive on a HTPC. The WHS and the HTPC are connected physically to a router. The back-up drive is USB 3.0 and plugged into a 3.0 USB input on the HTPC.
The transfer rate is only 40MB/second. Why is this? The data is being transferred via CAT6 cables from the WHS/Router/HTPC and then USB 3.0 to the external drive
I know there are very similar threads but like I said I cannot find a solution. [code] I recently noticed the transfer rate really slow, at an average about 1.5MB/s.I have tried enabling Better Performance option but what happens is that it starts really fast and then goes down to about 1.5MB/s anyways and usually just freezes or stops.I also have a laptop, its an Acer Aspire AS5745DG-6681. Specifications are:Intel Core i5-480M, 15.6" HD (1366x768) LED-backlit, 4GB RAM, 500GB HDD, Blu-ray Combo Drive, NVIDIA GeForce GT 425M 1GB, Wireless N, HDMI, Webcam, 9-cell, Windows 7 Home Premium 64-bit.I updated the RAM to 8GB on the laptop.Using the same external hard drive, I can get rates at an average of 30MB/s and better performance is also disabled on the laptop.I Don't know what the difference is they both have Windows 7 64 bit, just the laptop is Home Premium and my desktop is Windows 7 Enterprise.
View 9 Replies View RelatedTransfer rate 56Kps in 30 mins what size is the file?
View 7 Replies View RelatedMy western digital usb 3.0 external hard drive is giving only 1 MB/Sec transfer rate. I know its really very slow. Can any one let me know what we could do increase the speed.
View 1 Replies View RelatedMy problem is slow usb transfer rate - at first it start off real good (70-80 mb/s then within 10 sec it drops down to 3 and even 1 mb/s). 1.5 mb file gets into my flash drive in 10 min or so. Now I've formatted flash drives, no change. Write-caching enabled, "best performance" for flash drives enabled... Tried on a Lap-Top - transfer rate is not so high, but stable all the time - 15-12 mb/s. Remote Differential Compression disabled. Transfer rate within the hard drives in my computer is OK (I got 2). I don't know if it's the Windows 7 problem or the motherboard problem or hard drives config problem.
Here is my info:
Windows 7 Ultimate 64 bit
HDD's: Samsung 500bg and ST 320 bg, both 16 mb 7200
mobo - GA-770T-D3L, v.1.
RAM - 8gb
Phenom IIx6
transfer data from one usb to another usb without PC?
View 1 Replies View RelatedUpon recommendation, I have a new Wintec 4GB Flash Drive to do the transfer but do not have a clue how to do it. My old Dell Inspiron E-1505 notebook had Win XP Media Center and OE email with 1GB harddrive. My new unit is a Dell Inspiron N-17 10 notebook with Win 7 and I changed email client from Yahoo Mail Classic to Mozilla Thunderbird. (full details of my new Dell notebook are below).Tech Support Guy System Info Utility version 1.0.0.1OS Version: Microsoft Windows 7 Home Premium , 64 bitProcessor: Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz, Intel64 Family 6 Model 42 Stepping 7Processor Count: 4RAM: 4010 MbGraphics Card: Intel(R) HD Graphics Family, 1813 MbHard Drives: C: Total - 596476 MB, Free - 568638 MB; D: Total - 14000 MB, Free - 7636 MB; Motherboard: Dell Inc.
View 14 Replies View RelatedGuys actually i want to transfer some data from my mobile (wifi enabled) to my laptop (wifi enabled) over wifi...
View 9 Replies View RelatedI have a Asus G74SX and I want to transfer data from old internal 60gb hard drive to laptop. I have a usb 3.0 on laptop. What do I need exactly to do this. I have 2 hard drives on old desktop which is 6 years old. One is Operating system the other is just for backup.
What is the process that goes on when data is transmitted between two routers?
View 2 Replies View RelatedMy Windows 7 system won't boot up and I gave up trying to fix it. I bought a new PC and want to preserve my settings, programs, etc. All of the transfer solutions that I've read require the old hard drive to be bootable. Is there a way to transfer everything over to the new PC from just the hard drive?
View 4 Replies View RelatedI have a desktop with W.7. Ultimate - connected to Internet by WIFI - and I have just bought a laptop, which has W.7 Home Premium, to use when away from home.I have just returned and would like to transfer data from the laptop to the desktop. I do not seem to be able to do so.I could obtain a memory stick and transfer via that, but I was wondering if I could obtain a cable (USB) that I could use.I have a second HD inside my tower from my last Computer .- which contains my music collection - and I can access that through the Start button/Computer. I do not have a cable with a USB connection at each end - only an extension USB cable for my reception of WIFI which is an ordinary USB for the computer and a larger size to connect the radio receiver.
View 4 Replies View RelatedI have backup DVD that contains data and pictures that I would like to transfer into a new computer. What steps should I take. I have W7 and use Mozilla Firefox or IE. I have never worked with a hard drive and don't want to screw it up.
View 1 Replies View RelatedOld PC currently running on Windows Vista Home Premium 32bit and new PC on Windows 7 Home Premium 64bit.
So far I've did a full backup via Acronis True Image 2012 (read online about it) and I'm lost on what should I do next? Do bear in mind that I'm a "noobie" in tech stuff
problem either stopped on the usb data transfer from windows 7 PC to a usb HDD or flash drive; or crashed and give errors. However, i dont encount this sreious problem but rather annoying problem.
As soon as i use my Windows 7 PC to copy a file to usb stick, the process is all ok, but when i read the file, it seems to be corrupted, example, if i have put a avi file in the usb drive, it will play as skipped.
I have updated the hotfix http://support.microsoft.com/kb/976972 but still doesnt fix my problem. I have updated the chipset driver from nvidia web site, still no help.
I know for sure that problem occured after i fresh installed to windows 7 from xp pro. I have also tried to uninstall the usb root hub but still give me the same driver as it was.
how to improve my computer rating score of 5.9 while still maintaining a decent overall PC temperature; I understand that, that is the highest windows 7 will allow? rating is low due to low disc data transfer. How to improve?
View 6 Replies View Relatedi have a Samsung spinpoint F1 1TB 7200 sata 2 transfering 40 GB's to a Western Digital 3TB Green Caviar sata 3 5200.i dont believe i have set anything to do with sata transfer rates.its taking 10+ minutes to complete the 40 GB data transfer.Is this normal? if it is not. What is Wrong? and is there a way to fix it?
View 5 Replies View Relatedinstalled a 60GB SSD a couple of years ago when they were quite expensive. I planned to use it solely for the operating system (Windows 7 Ultimate x 64). However over the years, it has become full to overflowing. I would like to clean it up and return it to the operating system only. Unfortunately I do not have the original disks or access to the installation programs for most of the information on the SSD. I have two other hard drives in the system - a 500GB Velociraptor that I originally wanted to hold all the programs and a 1000GB for the data. Can anyone tell me the best way to transfer the data off the SSD without screwing up my system?
View 3 Replies View RelatedI am attempting to help my friend. Has old laptop, been making system image backups with Macrium Free on external usb WD Hardrive. Now wishes to get new laptop and transfer pertinent data and programs to the new computer.He had not installed the HD programming, using macrium instead.
View 3 Replies View RelatedCanon camera has firewire port but computer only has USB. Is there a cable that has firewire connection on one end for the camera connection and a USB connection for the computer?
View 1 Replies View Related