Corrupt Program File...unable To Be Fixed?
Nov 12, 2011
The laptop (which was running) was OK (battery just kicked in, obviously). (Win 7 32bit)But the PC (I was working on) wasn't !!! (Win 7 64 bit)When the power came on five minutes later, I restarted the PC.Everything appeared fine, however the program which was open and that I was working in, wouldn't "fire up"....and "windows was trying to find a solution to the problem"....as it does, or rather doesn't.FYI The program (.exe) is a data mining,bridge program (between a data feed to a financial platform. (also "firefox", which also was open, couldn't open either).First I looked at "System Restore" and noted that it said that "Rapport" had updated (at the date and time of the power outage), so I contacted Trusteer via their online chat facility. They said that they have indeed had put an update out recently but knew of no conflicts.
I therefore (with fingers crossed) thought it may just be a conflict with "Rapport", so from "programs" I removed "Rapport", then rebooted, then tried to "fire up" the program again....but it again failed to open or run.Next, I did a "System Restore" that put me back a few days (from the 11th of Nov to the 3rd of Nov).I then once again removed "Rapport" and rebooted.Then (with fingers crossed again) I tried the program once more.Again it failed to open and run.I also tried "firefox"...and this also failed to open and run.Next I removed the program from the computer, rebooted it, then re installed the program...and rebooted. ...but still nothing.
I checked (just in the off chance)that the program had not changed since I last installed it (some 10 month previously) by installing it on the laptop....and it installed just fine, opened and ran as it should.So then I looked looked to investigate futher and ran " sfc/scannow " (as administator), thinking that this would throw up some corrupt files in the system, which would give me a starting point from which to work from........but nothing was found. Everything "appeared" to be clear. By that I mean it came up with no faults at all.I rebooted the computer after this scan (just to add a belt, to the braces, so to speak)....and again, the program will not open or run.So...to recap.I have removed "Rapport", which was the only "update" that had happened.I did a "System Restore" to a date where everything was clear....and everything was running. (and removed Rapport) I removed and reinstalled the program which was (is) affected.
View 2 Replies
ADVERTISEMENT
Apr 7, 2010
"windows 7 setup.exe corrupt file the file or directory is corrupt"I'm trying to install 7 32bit OEM Home Premium with the legit bought holographic CD (not a burned image of any kind) onto a Gateway laptop with a brand new hard drive.I was getting this error installing the OS the regular way booting to the cd and installing from it, so instead I copied the contents of the cd to a freshly quick formatted NTFS partition on the new laptop hard drive, then used bootsect and diskpart to setup the disk. It boots just fine and also gets the same error installing straight from the hard drive.
View 9 Replies
View Related
Oct 14, 2012
Geting c program file/winzip driver updater/lang.ing saying unable to continue
View 1 Replies
View Related
Nov 29, 2012
I am currently attempting to install Windows 7 on an SSD RAID Array, and I have encountered several issues (this has been a one step forward, two steps backward affair). The issue that I am currently facing is the fact that I am unable to load RAID drivers during the OS installation.As is normal for this kind of installation I choose "Custom" and I cannot see any drives listed, this is the point at which I click on "Load Drivers" and then I select "Browse". My challenge is that regardless of how I "insert the drivers", which is to say whether I put them on a separate USB drive (FAT32 partitioned), or take the Windows 7 installation DVD out and insert a CD with drivers - I simply cannot navigate to the drivers.Because I am unable to load the RAID drivers I simply cannot proceed with the OS installation.*** Note ****As of writing this I came across a program called RT Seven Lite, which has allowed me to create a "slip streamed" Windows 7 installation - using the program I was able to integrate the troublesome drivers into the Windows 7 installation disk.
View -1 Replies
View Related
Dec 22, 2009
I have a dual boot machine, Windows 7 Pro 64-bit and Kubuntu 9.10. Everybody was getting along just fine.
Today I booted from Windows, no problem; booted Kubuntu, no problem; then later rebooted to Windows. I now get a message that my Program Files (x86) folder is corrupt and unreadable. [While in Kubuntu I did nothing other than look at the list of files using Kubuntu. No file was opened or modified.]
- I tried dropping to a command prompt to run chkdsk (as recommended by the error screen) but cmd is corrupted
- So I booted off the Windows 7 disk and was able to run chkdsk - no problems found (with the /f and later the /r switches)
When Windows 7 opens, all my 32-bit programs are unusable, and I can't explore the Program Files (x86) folder. Properties lists it as 0 bytes. However, when I browse the folder from a Kubuntu boot, everything seems normal and is accessible.
I (gently) used some Kubuntu ntfs tools (such as ntfsfix to flag the volume as dirty so Windows would check/repair the volume on boot) but got nowhere. [I have no idea if this is useful, but I included the ntfsinfo output from both my Program Files and Program Files (x86) folders.]
View 4 Replies
View Related
Aug 8, 2010
I recently took my pc in for repair of the raid drive. The service center used a software which allowed them to change my password, so that they could access the pc. however I believe it damaged my profile because now, I can not change the password from password and outlook no longer remembers any of my email passwords, I must reenter them all each time I run outlook. I am trying to avoid creating a new profile.I am running Windows 7 Professional 64x with a mirrored 2TB drive. Simple peer to peer workgroup
View 6 Replies
View Related
Feb 27, 2012
I download Combofix to scan for malware(as recommended by a tech).After the download and automatic scan I discovered the following anomalies:Personalizn displays a Windows Explorer "Unspecified error"; the item "Program Uninstall" is no longer in Control Panel; Search just hangs - no activity at all; Properties (in task bar and program list) does nothing. I restored an Acronis full back up that I had done just a few hours earlier but it didn't change anything.My techie tried to tell me I had viruses (but they were just screen saver files with weird names) and still he couldn't fix it.Trying to reinstall from my upgrade CD (I had Vista before) doesn't work as it reports that it found errors but can't correct them. Techie wants to do a complete RE&RE and I don't want that.
View 3 Replies
View Related
Jun 13, 2012
My computer crashed and then crashed again during the restart. Windows tried the start-up repair, did its self diagnosis and said I have a corrupt ntfs.sys file.How do I fix this? I have looked on the Win7 installation disk but did not find any drivers.
View 1 Replies
View Related
May 16, 2012
For what ever reason, I have a file on my 1TB WDC drive:
D:usersuser_namedocumentsxxxxx.pdf
that upon trying to open it, I receive a message that the file is corrupt.I have looked high and low trying to find a way to DELETE this file, but to no avail. There's lot of references about running CHKDSK to check the drive, running FSUTIL to query the dirty bit (which is set on this drive, because of this file), and using CHKDSK to clear the dirty-bit. And, I tried them all. This, however, is NOT a hard drive issue. The drive is fine. It's the file structure that is in error. I just need a solution that will let me DELETE the file. I don't want recover it.
1. Use Paragon-Software Hard Disk Manager 12 to copy the hard drive to another drive. The second drive is large enough to hold all the data from the larger drive.
2. Check the file on the drive copy... (yep, it's there... yep, it's corrupt... yep, the dirty-bit is on)
3. Create a filter in Paragon-Software HDM12 for that specific file.
4. Run the disk copy again using the filter.
5. Check the file on the drive copy... (this time the file is not there and the dirty bit is not set)
Having done this, I think I'm ready to copy the hard drive back. I just haven't pulled the trigger. I want to recable the drives to use the copy just to make sure I can reach everything. Then, I'll pull the trigger.
View 6 Replies
View Related
Apr 21, 2011
I have a brand new computer running Windows Home Premium 7, 64 bit. My mouse will not behave. As an example, when I left click nothing happens and I must right click and then select 'open' or 'open link' from a pull down menu. I think something must be corrupted but I don't know how to fix it.
View 3 Replies
View Related
Nov 13, 2009
I have Vista Home Premium 64 Bit and Windows 7 64 Bit. As you see I am dual booting. I had Vista installed first.I installed Win 7 later.Everything was fine.
I installed cuipid a program that monitors,memory,CPU,etc. on Win 7. I used the PC aftyer that for a couple of hours.I shut doem,the next day I booted up went in to Windows 7(set as Default). It was fine.I resarted and arrowed to Vista to boot into Vista.
I got a Black sctreen saying: Windows failed to start. Hardware or software change may be the problem. I went into 7 and restored the system back to before I installed Cuipid,No Luck.
The screen that comes up when I try to boot into Vista says:
1 Insert windows Disk and restart.
2.Choose your choose your language and click next.
3. Click repair your PC./
I tried a repair on Vista and &.
On the page I also get error: File/windows/system/32/Winload exe.
Status: Qxc000000F
then selected entry could not be loaded because the application is missing or corrupt.
I know there is a way to restore the Boot manager from Cmd??
I would appreciate it if anyone could advise me how to restore the Boot Sector.
I have 2 hard drives both partitioned.
C: and D:
E: and F:
View 1 Replies
View Related
Jul 11, 2011
how to delete..
View 5 Replies
View Related
Jan 10, 2012
I have several corrupt files and cannot delete them
View 4 Replies
View Related
Oct 2, 2012
i have this corrupt file on my computer, my OS is windows 7 and no matter what i seem to do the file wont delete. This file is like a ghost, its not on my hardrive and there's nothing in it, its just sitting in my library in my pictures section. The file location is C:UsersStevenPictures, and the file name is 50292_132656813424_564_q. Like i said this file is like invincible to everything i throw at it. Ive tried unlocker and renaming it and also tried using CMD commands to try and delete it but my computer cant find it.
View 9 Replies
View Related
May 16, 2012
Last night, my computer rebooted itself unexpectedly while I was accessing a Word document. I was constantly saving the document, so I expected that it would come back up when the computer rebooted. Every time I try to open it in Word, it says that the file is corrupt and cannot be read. I have tried the Open & Repair function. I have also tried the Extract Text from All Files function. When I did the latter, the document came up to about 1,000 pages worth of different codes. When I open it in WordPad, the most recent things I saved did not come up. I am absolutely sure that I saved what I was working on. Is there any way I can fix this corrupt file? It is a crucial part of an assignment.
View 1 Replies
View Related
Aug 30, 2012
There is one specific folder in the Documents library, which when opened directly (like from a shortcut on the dekstop) only shows "corrupted" files with unusable strings for all file names and extensions.However, when opened in tree view, the files appear as they should. So at least it's reassuring that the folder contents are still there and can properly be read and changed. But the issue is still inconvenient and worrisome.I have already tried chkdsk /f on the partition and even mirrored the whole volume to a new harddrive, but that didn't help. I also tried copying the whole folder to another location, it shows up just fine that way as well.
View 1 Replies
View Related
Dec 9, 2012
I'm trying to re-install my firefox browser, but every time I try to run the executable file it loads to 4% then closes.It gives me a window that says..Extraction Failed ile is corrupI'm also trying to update my drivers. But every time I run my graphics driver installation file it tries to "verify installation" then I get the following window...SIS ErrorInstaller Integrity check has failed. Common causes include incomplete download and damaged media. Contact the installer's author to obtain a new copy. [CODE]
View 14 Replies
View Related
Feb 27, 2011
When I was launching Turbo Tax I received this error message: c:windowsMicrosoft.netframeworkv3.0wpfgfx_v0300.dll is corrupt and unreadable. Please run Chkdsk utility What I have tried already:
1- Ran chkdsk utility -no issues
2-Scanned wpfgfx_v0300.dll for viruses and it came up Clean using Malwarebytes and Alvira
3- Ran a repair install on Framework .NET Framework 4 Client Profile then rebooted - still have the problem
4 - tried to simply delete the wpfgfx_v0300.dll system won't allow
5- Tried overwriting wpfgfx_v0300.dll file from a back up - system won't allow
6- Both Acronis File Shredder & Malawarebytes File Assassin SAID file removal was successful but the file is still there.
One other thing: Windows keeps wanting to run a disk check for "consistency" at boot up. I let it run but it doesn't seem to find anything. how I can delete, repair or replace this file???
View 1 Replies
View Related
May 25, 2012
I was asked by a friend to try and fix her laptop. I don't know any of the history that lead to this problem, So trying to fix this has become a bit difficult.When trying to boot it loads in the BIOS screen what seems like a little too long, and then it will start to load Windows7/Vista (I don't even know what OIS is running, that's how much I don't know about this laptop)(It was just dropped off at my house with a note) and I get the Windows Startup repair screen. After running the startup repair it says that the problem cannot be fixed automatically and in Signature7 of the repair it says CorruptRegistry. I have tried a backup point and there weren't any ever created. I try to run system restore or the Toshiba recovery and nothing happensI am aware that I may have to restore the laptop but I'm not even sure if the person has the disc anymore[CODE]
View 3 Replies
View Related
Jul 25, 2012
I had Windows Vista and I upgraded using the 'clean install' to Windows 7. I had been experiencing BSODs (blue screen of death) and I thought a re-install, or an upgrade would solve those issues. However, I continue getting those BSODs now with Windows 7 as well.I can't quite recall the stop errors and names, but they were mostly IRQL_NOT_LESS_OR_EQUAL. I also had 'memory management' sometimes.Recently I powered on my computer and realized everything was running slowly, and I've noticed the BSODs have stopped. I ran everything, anti- malware, virus, spyware programs and they found nothing. I ran memory diagnostics and it came up with nothing. There's nothing really on this computer to be slowing it down since I haven't fully replaced all my files and it's a new OS.The only thing that found anything out of place was after running SFC /scannow, the CBS.log file says this in several places:
[code]...
What I could understand from that is it's saying that a file, called msdrm.dll.mui, is corrupt. Apparently it's in the 'en-US' folder (assuming). It also says on the last line, 'file is missing'.Now, I've replaced from the actual Windows 7 installation CD, the file msdrm.dll.mui in the en-US folder, and in another folder that had the same file. After restarting, the computer still runs sluggishly.My question is, why would the system file still be corrupt even after replacing it from the installation CD? The CD is fine, no scratches or anything like that, and it's virtually new.Also, could my system be missing something that the file msdrm.dll.mui needs to function properly? (I ask this because it says 'file missing') What can I do about this system file to fix it?Note: I looked up the system file msdrm.dll.mui and I read that it's needed for system performance (and performance right now is my issue so I'm guessing this is what's making my computer run slugglishly).
View 3 Replies
View Related
Sep 5, 2012
My sister asked me to install her windows 7 after formating (I did this before, on my laptop and others PC's) this time I met a problem. After selecting partition place for installing, on step 2 - Installing Windows at 7-8% of Expanding files I recive this error : Windows cannot install required files error 0x80070570The file may be corrupt or missing.. Make sure all files required for installation are available and restart installation.The DVD is in good conditio
View 1 Replies
View Related
Feb 17, 2012
Running win 7 64, when i try to download something as simple as live essentials installer, or itunes setup, the dialogue box comes up and it won't let me open from that location, just save. Trying to save it fails until I hit retry, but the downloaded file prompts the "open with" box. This is a brand new machine and install. The only thing I really did was follow the tutorial on here to move the default locations for my files. Oh, and if I transfer the file from a zip drive, it works fine.
View 4 Replies
View Related
Nov 6, 2011
I just did a clean install of Windows 7 x64, and now I have 2 pop-ups telling me somethings wrong.They are both called Name Setup, and they say:1 - efm sys file corrupt. Reinstall2 - rmorsm.dll not registeredI did a SFC /scannow as stated in SFC /SCANNOW Command - System File Checker and although it found and repaired some errors, none were of the 2 I mentioned above, and they reappeared also after doing the SFC scan.I even did several scans, but the problem still occurs.Googling either of these 2 error messages only yields: Missing Files but no side effects, which led me to the SFC scan in the 1st place, which solved the problem for him, but persist for me.
View 1 Replies
View Related
Aug 10, 2012
I purchased a 1 TB Seagate Hard Disc about four months ago.It has two Partitions One 50 GB with Windows 7 New and other a 950 GB with movies,music important documents etc.I also have two more Internal Hard discs with Windows 8 and another windows 7.For last one week or so had problems in booting into new Windows 7 got message that it should be repaired through Windows DVD.Did the needful and booted up.The next day same problem and my action the same. This happened about 7 times or so.Today same problem.My reaction the same.But while booting I got a message that the 950 GB partition cannot be accessed because MFT is corrupt.Browsed through Windows 7 Forums and as advised in one of the threads downloaded Testdisk.Ran the program but unfotunately the dreaded message that both MFT and Mirror MFT are corrupt.Have lot of badly needed Data and I really want to recover it.
View 3 Replies
View Related
Jan 19, 2011
I had a bsod randomly and decided to run a /sfc scannow. It found 1(2?) problem files
2011-01-19 00:44:56, Info CSI 000002ac [SR] Could not reproject corrupted file [ml:60{30},l:58{29}]"??C:WindowsSysWOW64en-US"[l:28{14}]"iassdo.dll.mui"; source file in store is also corrupted
2011-01-19 00:45:50, Info CSI 000002fc [SR] Could not reproject corrupted file [ml:60{30},l:58{29}]"??C:WindowsSysWOW64en-US"[l:28{14}]"iassdo.dll.mui"; source file in store is also corrupted
iassdo.dll.mui a 6kb file found in the syswow64en-us folder.I tired extracting file from my win7 disk however it still keeps the error on rescan. I was wondering if someone could upload the file so I could try that, dont want to do a full repair install for one file.there's 2 files with the name iassdo.dll.mui, the problem ones are the 6kb not the 45kb file.
View 17 Replies
View Related
Dec 23, 2011
When I start my PC it shows a message that "your file named NTFS is corrupt". Then PC screen becomes Blue and shutdown my PC! Should I change my hard drive?
View 2 Replies
View Related
Aug 27, 2012
I had a BSOD when Windows was loading and couldn't get back to Windows anymore. I just kept happening and it was so fast couldnt see what caused it. So I decided to reinstall Windows 7 from the scratch. Installed it on SSD after formating boht SSD and HDD. Installation went to 100%, computer booted and now i got this message.
windowssystem32configsystem
File missing or corrupt
0xc0000001
Tried reinstalling for second time, formating all drives. Same thing happens.So I tried using the repair function on the DVD, and manually replacing the SYSTEM file but its also missing from the backup folders.Is there any way to get the missing file to the right location? Like does Win7 DVD have it somewhere?
View 4 Replies
View Related
Feb 10, 2013
Corrupt files in System File Checker - now whaIn trying to fix a still unsolved problem with my WLAN network connection (detailed here, if relevant: WLAN issue - WiFi can't connect - Tech Support Guy Forums), it was concluded that a main problem is corrupt files identified by the System Files checker.This is the message I get when running the checker toold corrupt files but was unable to fix some of them Checking the log, I searched for cannot repai but nothing comes up. Searching for in the logs turns up some cases of annot verify component files for Microsoft-Windows-Security-Kerberoarch for turns up nothing. Not sure what to do now. My computer is a Dell XPS 15 Z
View 8 Replies
View Related
Aug 19, 2012
I just installed windows 7 on my pc and when I am trying to install firefox aurora or firefox latest versions its showing error "File is corrupt". I used these software in previous version and when I am trying to changing its compatibility. There isn't any option for "Windows 7" compatibility mode. I tried many tips but not successful ...
View 1 Replies
View Related
Aug 30, 2010
I am running OS Windows 7 Pro 64bit in my PC. I keep on having a corrupt file whenever I extract RAR files especially larger files. Almost all larger RAR (more than 3GB) will have this problem. So far smaller RAR I have no issue. I have tried extracting the same under different PC (OS Win XP) but without any issue. Which I believe not the RAR files been corrupted by itself. The corrupt files seems to be random.. Sometimes, I manage successful extraction, but sometimes I don't. I have the same problems even after clean installation. I have run memtest without any error. I am using 6gb ram
View 4 Replies
View Related
Aug 5, 2012
I have been trying to install JAVA on my PC, and when I go to Java.com and try to download the latest version, I get an error message - 'Downloaded File Is Corrupt'.The file is Java 7 Update 5.
View 4 Replies
View Related
