Connecting Broadband To Tablet Using USB LAN Adapter
Jun 18, 2012
I have a micromax funbook. It has a microusb port and I have a micro to USB adapter. In teh manual they are saying I can connect to net using a lan cable via a LAN to USB adaptor. So I bought a LAN to USB adapter (by ENTER, Costs 450/-* MRP) .. I checked it at the shop using their net connection, which was in PPPoe mode(Doesnot need a dialer). It was working and I could get kind of ok connection speed.
At my home I have Broadband in Bridged( I need to dial to get connected) mode. So I have to create a dialup connection dial to connect to net. So when I use the adapter at home cannot connect to net. How to get bridged to get working on a Tablet? I am using bridged because I can keep my modem on and can connect to net quickly when needed. If there is no other way I will switch to PPPoe mode. But don't advice to "buy a modem with wifi" etc..
ive got a tablet that im trying to connect it to my windows 7 laptop with out the use of a usb cord ive enabled file sharing on the tablet and laptop.when i type in the ip adress on the laptop it shows a screen with 2 folders certs and media this is correct up to now,when i try to open the media folder it hangs for about 3 mins then gives the error 0x0070035 file name not known check spelling 0r sometimes media does not have permision to use this network resource contact admin to see if you have access permision specified network name not available. ive connected it to a old xp laptop with no problems at all.
i have a fresh windows system and i noticed when i put my usb broadband dongle and connect to the internet with it, I always get a BSOD 0x0000000A after it connects dunno whats the problem.
OK so I already wrote all this once so give me a break if this gets brief. I have AT&T DSL and at the most inconvenient times I get sent to an AT&T page that states " The Broadband Link is Currently Not Available" It has a reset button at the bottom but there is no need because I can wait a moment and refresh and it will say problem solved please close the browser. This has the ability to cause lost work.I have read alot of forums blaming everything from the wiring to the phone lines in the house to the hardware, anyhow everything on this house is Wifi so I don't know if this problem persist over hard line but I assume it does because others have complained of it.
I have noticed that some times my internet connection can get a download speed of 5mb/s for some time (from minutes to some hours) and then drop at 500kb/s-both wireless and lan.The speed might rise/fall at random points but it is also somehow related to me disconnecting and then reconnecting to the internet.Most of the time I will have the low speed unfortunately.
After installing a new Virgin Superhub and finding I had internet access I thought that everything was working fine but later on this morning I found out that my Home Network ie wifes pc and the broadband connection to my main television set was offline. After googling a while and finding an article at the Virgin Media site I found out that the Default setting when installing the virgin superhub was as a router which meant that it had blocked off my Buffalo Airstation router and hence the no internet on secondary PC and TV. I had to enter the admin pages of the Virgin superhub and re-install it as a cable modem and when I eventually rebooted my system, and after a couple of tweaks I finally had my home network up and running again. I use Comodo Dragon as my default browser and a couple of hours ago I noticed a slow up of my main Win7 OS PC broadband connection which shouldn't really be as I have upgraded from a 10Mb connection to a 30Mb connection and my internet has seldom hung like this. It seems to be an entry of svchost.exe that is causing the problem. I did a scan with Process Explorer screen shots below. The svchost entry with PID 1892 is linked to "Local System Network Restricted" and to the service Superfetch. On the Comodo CIS Summary screen at the same time I saw that even though Comodo Dragon is running it is not shown and again svchost is using 90+% of my bandwidth. And when checking the Firewall Events screen I saw that some of Comodo Dragons functions had been blocked.
I have a router with one ethernet port and one usb port. but i don't use that usb port. I use a ethernet switch to connect my 2 computers and the router. I can share data between 2 PC without any problem. but the problem is i can't use broadband in both pc simultaneously, when one PC is using broadband then in other PC when I'm connecting broadband it says that the router is busy and then shows error 678. please help me to use broadband in those PC simultaneously.
I bought a computer with a Windows 7 OS and can't connect with my ISP. Windows 7 diagnostic says I need a user name and password from my ISP to establish a connection. My ISP offers no user name or password under it DHCP service. How do I get online??
I have recently moved to Sky Broadband and I am experiencing difficulties regarding my wireless connection.
The device in question is a Sony Vaio FW56E (Windows 7, home premium , 64 bit). I initially contacted Sky regarding the connection but as all my other wireless devices (Blu Ray, Ipod, Vista notebook) connect without any issues they could not help.Sky have confirmed that it is not a fault with the Router and that it must be a software/hardware issue with my Vaio.
My Vaio is connecting to the Sky network but I cannot actually access the internet. I have checked all the settings and checked my wireless password. I have also looked into my firewall settings and tried to connect with windows firewall disabled.
Listed below are all the steps I have taken to try and resolve this issue.
Reset the Rouer Removed the Sky network and reconnected again. Checked that the wireless is actually enabled. Changed the wireless channel several times. Updated the VAIO via windows update using the Ethernet. Reset the router.
If it is of any use the Rouer Sky provided is a Sagecom F@ST2504n.
Up until around two days ago, i have been using 3G broadband on my Windows 7 machines. This has worked as it says on the tin, until the software supplied with the devices did not want to connect anymore. Having tried all the tricks, like reinstalling drivers, using safe mode to do same, checking all my software is up-to-date etc. i still cannot get the devices to install correctly, as the "Modem" part (e.g. "ZTE Proprietary USB modem" on my ZTE MF626) fails to load it's drivers WITH ANY DEVICE WHICH USES A DIALUP-STYLE CONNECTION. The exact error I found in Device Manager is: "This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)"This happens if i plug in a USB dongle, or use bluetooth to link to my cell phone. Does anyone know how to force the drivers to load, and/or make this problem go away? I suspect there has been an update recently which has broken this.
I've been using my tablet pretty well stationary on my desk or the last year. When I installed windows 7 beta, I enabled the tablet function and it worked fine. Fast forward a few months; I installed windows 7 professional, but never could figure out how to enable tablet functionality, but I haven't really missed it until now. The computer doesn't detect the stylus near the screen. I've enable, disabled and re-enabled Tablet PC Components. I don't know what to do...
Can´t find a answer so decided to make this post. Using Sticky Notes on Win 7 is really nice, but sometimes I would use my tablet to write/draw manually to a note.
The problem is if I make any mistake or just want to delete, erase, part of what I wrote its no possible (i think).
I can at any time delete/modify etc my text but not what I drawn. The only way I found was delete the note and start over. There is anyway to get around this?
Box: HP-Pavilion OS: Win 7 Home Basic Ver. 6.1.7600 32Bit BIOS: American Megatrends 5.11 Sound: Realtek High Definition Audio Modem: HUAWEI Mobile Connect - 3G Modem CPU: Pentium(R) Dual-Core CPU E6500 @ 2.93GHz, 2936 Mhz
I am trying to find out how to keep my Broadband connection active when I switch users. I have 4 accts. on my computer, one for each family member. Whenever I switch accts, my Broadband connection shuts down. You can start it up again after the switch with no problem. I would prefer, however, to have it stay connected during the switch, as this would just make my life easier. For instance all users connect to the same torrent software, and I have the files for it synced. So, no matter who is logged in, the torrent info is the same. When the connection drops, the torrent software has to reload all the DHT info. I have googled this, to no avail. I assume it is a matter of where the BB Modem Drivers are installed? Or maybe a Registry tweak.
Recently installed Dell vostro Laptop - Windows 7 Professional - Windows Live Mail.
using a Verizon USB Mobile Broadband adapter - works great on the Internet, but when I try to use Live Mail for Gmail account, the connection keeps dropping.
When using the Internet to get google Gmail - all works perfectly.
It is just when using Windows Live Mail that I drop the broadband conection?
We changed our provider today and are back with satellite instead of broadband. I have wireless for the computers but now I've lost my wireless printer. It's a Canon MP 560. I tried setting up the connection from the computer and from the printer.
i have bsnl broadband connection.whenever i tried to connect it through my win 7 it gives me error 651 with pppoe.. I am on a wired connection through a modem,..modem is workng well with win xp..but not with win 7.
i have a severe problem. whenever i use connect option and get connected to internet, data starts to downloaded automatically. i fear some programmes are running in the background unnoticedd. how can i stop this so that i can save my banwidh and hence money?
I have a Wacom Bamboo tablet and whenever I try to draw online, it uses the Windows 7 Tablet input. I'm unable to make quick marks due to the "flick" and if I hold the pen down for too long, the cursor will spin in a circle and a pop up box will appear, kind of like a right-click. I'd like to turn all of this off- everything that has to do with the tablet that was already installed on the computer, except for the basic Bamboo Driver.
when i used windows 7 RC 7100 the genius drivers from windows vista worked ok. But now under RTM 7600 these drivers dont work. I'll thanyou if someone know how fix this problem, i need the tablet to work.
I have a Tablet running windows 7 and have seen some Desktop pc,s that have a Dock at the bottom of the desktop in the middle with icons in it and just wanted to know how can I get that on my desktop for my tablet.
I can't find the Windows 7 64bit drivers for my Medion MD41217 tablet anywhere and I know they exist, because people have mentioned them.Jumping mouse problem [Tablet] My tablet is refusing to work without the drivers, I've changed all the batteries and I've been into the control panel to try and adjust settings there but nothing's working.I've got the tablet to sort of work - the mouse is doing fine. The tablet won't sense the pen is near, though. The light keeps flashing rather than becoming constant.
