Connecting 3 Monitors On Ati HD 5450 Easy Way To Do

Jun 29, 2011

Currently have 2 monitors connected to my xfx ATI 5450 (has 3 ports: 1 DVI, 1 VGA and 1 HDMI however the box says it also supports displayPort so i presume that the HDMI is also the DP).I am currently using a vga and dvi port on this card and would like to connect another vga monitor.I currently have 1 VGA female to DVI male converter.

View 1 Replies


ADVERTISEMENT

Windows Easy Transfer Not Connecting

Jul 23, 2011

I have a new computer (windows 7 64 bit) and my old computer is windows 7 32 bit. I connected both computers via gigbit router. When I load up windows easy transfer program on my old computer it gives me a 6 diget code, then load up my new computer windows easy transfer program and enter the code. They then try to connect but never do. It times out after a few minutes. Any ideas on what to do? They are both connected to the network and both are set up to share files. I can browse the internet with both but I cant connect the easy transfer program..

View 1 Replies View Related

Connecting 3 Monitors In Windows 7?

Nov 30, 2009

I have 3 monitors connected in windows 7 64 bit; VGA, DVI & HDMI/DVI cable. The displays are all there, but I can only get two to work at one time. I can readily switch between them but not get all 3 to be as one extended desktop.I have a feeling I'm missing something simple, like another piece of hardware to extend them as-one.The system is an ASUS CG5270, Quad Core2 Q8300 with Intel G45/G43 Express Chipset (display).I was pleased that I could use the HDMI output to a DVI monitor for the 3rd monitor. It doesn't appear that Windows 7 wants to allow three displays together as one expanded desktop

View 13 Replies View Related

Connecting 3 Monitors In Windows 7 Using HDMI / Display And VGA Port

Jun 6, 2012

I have an xfx radeon hd 6790. I am using the hdmi port and the display port for two tvs and I am using the vga (I think its called the vga) port it sez right on the box that it supports 3 monitors. I can switch between any two that I want but I cant get all three to work at the same time. I try to use all three at the same time I get "to extend the display another display must be disabled".

View 3 Replies View Related

Cannot Find A Driver For Radeon HD 5450

Jun 6, 2012

Have a VTX Radeon HD5450 silent GPU and I cannot find the driver from either the VTX or AMD sites. The download which half an hour from VTX was in Latvian (no insult intended) or some such language and included a heap of Microsoft stuff.

The AMD site doesn't throw one up when I click on the HD 5450 download am at a loss as what to do!

View 9 Replies View Related

Slow AMD Radeon HD 5450 Graphics Card?

Aug 24, 2012

The performance scores on my less than 2 year old computer are :- Processor & memory, both 7.3 Graphics 4.6 gaming 6.1 and hard disk 5.9. I have tried AMD fo poor graphics score, they suggested downloading their latest Catalyst driver suite. I followed their instructions to the letter and, no change. They now suggest that I upgrade to their Firepro range.As a pensioner, I never intend to play games on my computer, but do intend to try and record the family's life in photo slide shows and video, so only need the graphics side of the graphics card to work well.As I seem to have a slow card, I thought I'd go up on the internet and buy a faster one for £50 approx. (I want an AMD/ATI card, as I have an AMD Athlon quad core processor.) Trouble is all the review sites only deal with the gaming speeds of the cards, not the side I would use for video editing.So can anyone tell me, or guide me towards a web site that can, how to choose a reasonably good compatible graphics card that is geared towards video and photo editing

View 6 Replies View Related

Ati Radeon 5450 In Compatible With Intel Dg965wh?

Nov 4, 2012

AFTER INSTALLED POWERCOLOR ATI 5450 2GD DDR3 GRAPHICS CARD ,MY PC NOT WORKING PROPERLY.AFTER BOOT IT SHOWS BLANK SCREEN. AFTER MANY RESTARTS IT BOOTS. AFTER UNINTALLED GRAPHICS CARD I FACE SAME POSITION BLANK SCREEN.

View 1 Replies View Related

Free Download Graphic Card Driver 5450]?

Mar 11, 2012

i want to download graphic card driver

View 1 Replies View Related

Single Wallpaper On Monitors Monitors

Jan 5, 2010

1. Is there a way i can make a single wallpaper be stretched across both monitors (not just the image twice)

2. Is there a way to stretch the taskbar across both displays?

View 9 Replies View Related

Easy Transfer Using DVD?

Oct 25, 2010

Can I use more than one dvd when using Easy Transfer? I am planning on doing a clean install of Windows 7 Ultimate. I do not have an external hard drive at this time. I tried to use Easy Transfer on my Vista machine (before doing the clean install of windows 7) and the file it makes is bigger than the capacity of my DVD disks. Will it ask for the second disk when I try to put the easy transfer files onto the dvds.

View 2 Replies View Related

Easy Transfer - USB Problem

Nov 4, 2009

Installed Windows 7 last night on my XP machine. Installation went through fine & is running like a dream. BUT I've got an issue recovering files via Easy Transfer...

Used it in XP to transfer files onto my 4g memory stick - used up about 2.4g. When it came to moving the files back over to Windows 7 via Easy Transfer I get an error message saying "Can't connect to Files".

Is this something to do with drivers?

View 9 Replies View Related

Windows Easy Transfer

Sep 23, 2010

My problem is I don't know if I can merge 2 different pc's into the new laptop using easy file transfer or will it wipe out the first transfer that I have already done? Different users on both old computers.

View 9 Replies View Related

Windows Easy Transfer

Mar 10, 2011

I'm getting ready to replace my son's hard drive (Dell computer) plus upgrade his OS from XP Pro to Windows 7 Home Premium. I've downloaded the XP version of Windows Easy Transfer and ran it backing up the files to an external drive but I'm wondering if something went wrong. Looking at the backed up file (on the external drive) it doesn't look like what I've seen in tutorials which shows an icon named Windows Easy Transfer - Items from old computer. The file I get is a file that doesn't know what program created it although the size seems right. I've ran Windows Easy Transfer twice with the same results.

View 1 Replies View Related

Using Windows Easy Transfer

Jan 12, 2010

Ok so i bought a Belkin Easy Transfer cable to use the Windows Easy Transfer feature, the reason being is that I have several PCs in the house, 2 of them are gaming PCs, the others are HTPCs, I also have a laptop and not to mention my sister & dad uses one too, so I often have to copy files across one another, whether it's a movie, game or whatever.The files i copy and share across the PCs are usually large in size, so the best way i found was to use an external hardrive to copy files to it, and then transfer the files to the PC i want to copy to.But doing this is slow and annoying, and my external hardrive is a piece of crap and often gets corrupted (it's a cheap Seagate brand and unreliable).So I thought, maybe I should buy a cable that lets me connect 2 computers through USB port, and transfer the files that way. So I did, I got the Belkin Easy Transfer Cable yesterday and it works really nicely, transfer speed is fast and no setup is required unless you're using Windows XP, but it's not complicated to setup anyway as it gives you a manual guide with pictures showing you what to do.

Anyway it works fine except that it takes a few minutes to establish connection and scan for the files on the system. Basically, you connect the cable, and you choose the system you want to copy the files "FROM" as 'Old Computer', and you choose the system you want to copy the files "TO", as 'New Computer', and then it'll start scanning for all the files you can copy on from the 'Old Computer' (because you're copying files "FROM" it). The scanning takes quite a bit of time, depending on the size of your hardrive and how many GBs of files you have on it, for me it took about 5 minutes since it was on a laptop with 150GB HDD.So my question is, is there any option to bypass this scanning process?? Because I only want to specify a certain amount of folders to be scanned as those are the folders that I copy files from all the time, there aren't any options on how to change this during the Windows Easy Transfer process.Also, is it possible for me to right click on a file or folder and send to the other PC through Windows Easy Transfer this way, instead of connecting them both and let it scan, and finally be able to select the files i want to copy?

View 10 Replies View Related

Driver For Easy Note MX

May 18, 2012

I have a PB Easy Note MX, unfortunately I do not know if it is M36, M37 or M52 because the sticker is gone! I boughyt it about 4 years ago. How do I know which sound driver to download? I have recently installed Windows 7.

View 2 Replies View Related

Driver For Easy Note MX

May 18, 2012

I have a PB Easy Note MX, unfortunately I do not know if it is M36, M37 or M52 because the sticker is gone! I boughyt it about 4 years ago. How do I know which sound driver to download? I have recently installed Windows 7.

View 1 Replies View Related

Is There Any Easy Methods To Migrate Profile

Apr 26, 2012

Is there any easy methods to migrate profile. i mean if we are changing profile all the old settings should come like desktop items and outlook mail configurations etc. into newly created profile.

View 1 Replies View Related

Windows Easy Transfer Keeps Popping Up?

Aug 31, 2010

Great forum you have here. I just recently did a clean install of Windows 7 Professional 64-bit on a computer I use for recording digital audio. For some reason, the Windows Easy Transfer dialog box keeps popping up, even though I'm not doing anything to initiate it. Any ideas as to how I can prevent this or disable it? I did a forum search before posting, and while I found a lot of threads about Windows Easy Transfer, I couldn't find any related to this specific issue. I'll be happy to provide additional details/technical info if requested.

View 4 Replies View Related

Use Windows Easy Transfer To Migrate To SSD?

Aug 24, 2011

Unless anyone has inside knowledge that ssd prices are going to half in next few months, Crucial M4 64GB at around $100 is just too tempting to ignore.

In my current setup, user profiles are already on a different partition. I'm looking for the best way to migrate as much settings as possible. Among programs I have to reinstall and config are vs2010, sql server 2008, office 2003, quicken, vmware. Glad I made concious decision to use as much portable programs as possible.

View 9 Replies View Related

Easy Transfer - 2nd Hard Drive

Aug 9, 2009

I have read up on how Windows Easy Transfer works and on the page that gives the options for storing the back up file, you have one option for External drive or USB external drive.

No mention is made of being able to use an already installed 2nd internal data drive. Has anyone been able to successfully use an internal drive with WET?

View 7 Replies View Related

Backup DVD For Quick Easy Access

Nov 13, 2009

I am looking to backup my dvds for quick & easy access on the computer instead of having to search through & load up each one. What is the easiest way to do this in 7?

View 9 Replies View Related

Easy Way To Switch Off External Monitor

Dec 28, 2011

I 'm looking for easiest possibe way to switch between external monitor/external+internal extended view laptop LCD. Most likely this could be done by Fn+F8 which cycles among internal/external/internal+external (cloned). What I'd need is to cycle between External output only/internal+external (extended) and optionally internal only. So int+ext in cloned mode has no use for me. I know that it can be switched by Win+P which gives to choice whether cloned or extended view, but I'd like to have this changed in the cycle by Fn+F8 from cloned to extened, is that possible?

View 2 Replies View Related

Easy Transfer Utility And My Documents

Nov 24, 2010

I am using The Easy Transfer utility to make copies of the files I want to keep once I have installed Windows 7 on my WinXP PC and I will be making the file on an internal hard disk drive, which is E: As the My Documents folder has been directed to my D: drive and WinXP is installed on my C: drive, do I have to include My Documents in Easy Transfer or will the clean install onto C: leave my D: and E: drives intact?

View 9 Replies View Related

Easy BCD Cannot Automatically Detect Windows XP?

Jan 2, 2012

Firstly I am sorry for posting the same old problem. I have read other forum posts on this subject and have tried some of the posted solutions. however whatever I try I cannot get to work.I did have it dual booting once, but I have restored my system since then, and now cannot get it to dual boot into XP.At start up it will dual boot into windows 7.

View 3 Replies View Related

Easy Transfer Drive Mapping

Oct 26, 2009

I am having issuse with an XP-win 7 upgrade.

When I use WET utility it tries to install all my files onto my small C:drive. The original .mig file comes from a computer with C: J: K: drives... the new comp just has C: and D:.

Why isn't it giving me an option to map the drives when I upgrade?

It tries to install on C drive then gives up when it runs out of space.

When I look at the map drive tab in WET it says 'no drives are available for mapping.'

View 1 Replies View Related

Easy Transfer Error Message

Nov 10, 2009

I hope someone can help me. I recently installed Win 7, and I used easy transfer to move from 32 Bit Vista Home Premium to Win 7 64 Bit Home Premium. I did a custom install, but I did not format the partition. Everything worked great - iTunes, Outlook, and all of my pictures and movies came over.

I repeated this same process with the same transfer files on an identical machine and I am getting the following error:

'Windows Easy Transfer couldn't open the file' I'd believe this except that the same file worked 2 hours ago.

Has anyone seen this error? Anyone have any ideas to get all of my files out of this archive?

View 4 Replies View Related

Windows 7 Easy File Transfer?

Jul 10, 2011

I used the Windows 7 Easy Transfer for the first time and much to my surprise it worked without a problem.I previously asked questions of file transfer but after the answers I received I thought there might be a easier way to do this.My situation was migrating files from a laptop HP dv7-1247 x64 to a Netbook Acer 722-BZ197 x64 which both use Windows 7 HP SP1.Inititing the file transfer they utilize the terms from " old computer to new computer on this procedure. There is no mention of Windows 7 and only XP and Vista. Windows 7 was placed on the market 22 months ago but is not included on the instruction.As I proceded with this operation there a three methods available, migrating cable, flash card and network. Since I do not possess the cable nor flash card I selected the network After I intitiated the transfer from my " OLD HP with Windows 7 " it proved me with a code number to be used with the " NEW Acer with Windows 7.Proceeding to tha ACER it asked me for this code which I placed in the box. A new screen appeared but much to my surpise it asked if this transfer is from XP, Vista or Windows 7. I selected the Windows 7 and the complete transfer of my files was accomplished in less then 29 Min.

View 1 Replies View Related

Windows Easy Transfer Not Working?

Dec 13, 2009

Following the Windows Easy Transfer directions, I spent 12 hours transfering files from old computer to an external hard drive. Transfered total of 178 GB. Disconnected hard drive and plugged into new computer. The C: drive of which has 643 GB of memory. And yet, I got a "There isn't enough disk space available to transfer your files and settings. Free up some disk space and try again," message.No where in the WET setup did I see an option to select a target hard drive. I suspect the program might be trying to transfer the data to the new compters D: drive which only has 12 MB free.

View 4 Replies View Related

Free Slideshow Maker For Web Easy 8?

Mar 30, 2012

I want to run a photo gallery slide show in a web easy 8 made website. Not an online solution. In order to achieve that, the slide show should be able to be inserted as a HTML component into web easy The slide show doesn't have to be fancy, but it should be able to set auto start, and manual choice of picture using the PC mouse. It should be free for private and business use.

View 3 Replies View Related

Windows 7 Easy Mode Edition?

Apr 20, 2011

So here is my dream scenario. I do a fresh install of windows 7. Then i install all of my apps and codecs that i want. Once i have it configured exactly the way i want, i use a program to convert my installaltion into an iso that fits onto a dvd or dual layer dvd. Now, whenever a client wants a new computer, all i do is pop in that dvd, install and enter his license code. No more need to download, execute and click next for 2 hours. This install would be exactly like the one i set up beforehand.What i need is a program that does this. Open source is a requirement. I know i could swim through google, find a list of programs that does all this and then slowly weed them out till i find one that is decent. But it would be great if someone who does this task often could share how they do it with me, saving me hours/days of mind numbing labor.

View 3 Replies View Related

C180 Kodak Easy Share?

Mar 18, 2012

C180 kodak easy share?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved