I am currently installing windows and my installation is going extremely slow, I have no idea why. This usb key worked perfectly on my laptop and yet on my new computer it takes forever to reach the "starting windows" logo screen. [code]
View 3 RepliesMy internet speed has really decreased since I installed windows 7 I have realised that my internet is so much more slow than usual. I'm prepared to upload screen shots of anything required I have tried doing a search for an update for my ATHEROS PCI-E ethernet device and it came back as sayin it was up to date.
View 3 Replies View RelatedFollowing the clean oem reinstall tutorial to a tee, I finally got the Recovery Management to start copying files to system and completing to 100%, which took only 12+ hrs. The next step of restoring and updating system started and has been running 14+ hrs and is only at 27%... Slow as Hades is an understatement. Something isn't right. Should I let it keep going till it fails or finishes? Or start it over?
View 7 Replies View RelatedI've been troubleshooting this computer for some time now. At first, I disabled RAID because of the blue screens and I found that one was bad and the second of the RAID 1 appeared fine. Well, I installed XP to ensure it would work and that was extremely slow. My client didn't have a disc to XP MCE, but instead bought Windows 7. The installation took about 12 hours and the system is often unresponsive. On resource monitor, the 2.13Ghz Conroe CPU is barely tapped and the 2GB of RAM is barely at 30%. However, the system takes forever to boot and it very often stops responding for a period of time.
I did my research and found out that this model--original specs--can handle 7 better than this. I told the client it was probably an HDD error, as it seems to hang everytime the system must access the HDD. I can't even run the Index to find out what the systems rating is. I mem tested the RAM and chkdsk the HDDs before removing the first because of its clear faults in its inability to hold an OS installation. I recently installed the 2.5.3 BIOS update, but I haven't had a chance to install a newer version of Intel Matrix Manager.
specs are im getting all this info right off the system info)
Processor: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00 GHZ 2.00GHz
Installed memory(RAM): 3.00GB
Sytem type: 64-bit operating system
Hard drive - 80GB
Motherboard: Desktop board media series intel DG33TL
I just clean installed windows 7 ultimate 64-bit i have tried 32 bit as well but i have had no difference in booting up i did not install anything yet as the boot up is very slow i have tried different hard-drive as well i have 2 80 GB hard drives one is maxtor and one is WD both are IDE...i disconnected everything extra that i had on my comp like Nvidia Geforce GTX 460 video CARD using on board video card i had a wireless card installed took that ooff as well took off the extra fans i had. Previously i had windows xp installed and it working very smooth so i have no clue what can it be as there is no virus before i installed it i had cleaned it up and installed it clean.
I just reinstalled Windows 7 64bit from an OEM Disc i bought awhile ago for my system. Now that i have installed it, and updated it to the fullest, my boot time when windows is loading is really slow. 35-50 seconds to get to the Desktop. It used to take 5-15 seconds. I looked to see the Start-up services so i could disable extras, but being a clean install there wasnt any.
I also updated my BIOS, and the problem is still occurring. The Only things that are connected are my Mouse, Keyboard, and my External HDD (Which is unplugged when i boot up the system)
Here is my Configuration:
Windows 7 Home Premium (x64) Service Pack 1 (build 7601) 3.20 gigahertz AMD Phenom II X4 840 Processor
16Gig of RAM
500Gig HDD ATI Radeon HD 5770 Graphics Card
Acer V223W [Monitor]
DVD RW Drive
Blu-Ray Drive
Internal Multi-Card Reader
730 Watt Raid Max PSU Board: Gigabyte Technology Co., Ltd. GA-880GMA-UD2H
Bus Clock: 200 megahertz
BIOS: Award Software International, Inc. F5 09/30/2010
I am getting an error "cannot install" 0x80070714 when I try to install windows 7 into a clean disk and the installation just stops..
View 3 Replies View Relatedtell me if a re-install from a system image file on my notebook is as good as a clean install from say a retail disk.I can not format all my drive and start a fresh. Can my System image file become glitchy or infected with a virus.?
View 5 Replies View RelatedI'm working on a re-install of all components following a complete corruption of the boot sector on my drive which could not be fixed with repairs. The last time I installed everything fresh, I had no issues. Between then and now, there have been no hardware changes on my system, but now I am having issues installing the IDT Codecs. I keep getting an error along the following lines: Quote: ExitError: Error=Device Object not present, restart the system and run setup again. Running under compatibility mode, and running drivers from both the motherboard CD and the manufacturer website both have the same effect. The CD, when booted, says "This OS not support!" and only contains 32-bit vista codecs. ECS' website download indicates the IDT drivers as being compatible with Windows 7. Both do not work. It is almost as if the hardware "disappeared," despite the fact that I was using the drivers quite successfully till just 2 days ago, when the boot sector went kaput.
Windows has installed its own default set, which do nothing to power the 8mm jacks which I use with my speakers, but instead put sound through the HDMI, which is useless because I use a dedicated graphics card. I have tried uninstalling this codec and re-installing IDT, to no effect. Windows replaces with its own default codec.I have referenced this thread here, but offered solutions do not seem to work for me: Intel IDT Audio Driver will not install
Does anyone know whether there is a difference in performance between doing a clean install of Windows 7 vs upgrading Vista? Any better stability? I'm just wondering whether it's worth the trouble of the clean install.
View 3 Replies View RelatedI have seen a lot on clean installs but all guides are from like 2009. Is clean install still a way to install windows 7 with upgrade disc on a new hdd? since i have a hdd with vista on it and i have the licence how do i install 7 with the licence and a black hdd?
View 9 Replies View RelatedI originally did the upgrade install of Windows 7 from Vista to Windows 7. I am seeing that I now am running "ChkDsc" every time that my computer is shut down. I was told that I would be better off to do a clean install and reinstall programs and files. Can I do a clean install with my upgrade disc, or will I be creating additional problems ?
View 5 Replies View RelatedI'm an IT student who got a free Win 7 x64 disk from my school, and I am unable to do a clean install. My system specs are as follows:
Intel Core 2 Duo 3.12 Ghz
nVidia GeForce 9800 GTX 512 MB PCI-e
320 GB Western Digital HD SATA
1 Gb DDR2 1066 MHz and 2x2Gb DDR2 1066 MHz SDRAM
I set my boot sequence to boot from DVD-ROM drive first, and HD second. It goes to the "Windows is loading files" screen and gets hung up. I started the process and went to watch TV for an hour, and it is still on the "Windows is loading files" screen. I haven't gotten any error messages. I've unplugged all USB devices from my computer as I have seen on this forum that it has worked for some people.
edited to add: I originally had only 2 Gb of RAM, and it got hung up at the "Windows is loading files" screen. I thought it was getting hung up because I didn't have enough RAM, so I bought brand new 2 sticks of 2 Gb RAM. I took out one of the 1 Gb sticks and placed both of the 2 Gb of RAM...for a total of 5 Gigs. And, it is still doing the same thing.
I'm finding this decision quite hard to decide on and can't decide what to do. I am very picky about wasted space or unnecessary stuff on my hard drive, yet I'd rather not install everything all over again which will take about 20 hours or so.
My question is...if I do an upgrade-install, can I just delete everything in the Windows.old folder and have everything practically the same as a clean install? Or will there be still be some left over things from the hundreds of programs I've installed and uninstalled?
Edit: I've ran the Windows 7 Upgrade Advisor and everything seems ok.
My 2 year old laptop is starting to get sluggish so I'm wondering if I should try to do a clean install of my Home Premium Windows. Problem is, the computer came with no disks. Also, I'm assuming that the Backup and Restore function that's built in would only give me a copy of my crap-filled hard drive contents if I "made" the backup (to an external disk, presumably) then "restored" it to my freshly formatted internal drive. right? So, can I make my OWN clean disks with some utility on the machine? Or do I have to BUY another copy of Windows 7 Home Premium? Or will Best Buy provide me with one if I take my machine in? Or will Lenovo provide one?
View 3 Replies View RelatedI'm about to buy the Windows 7 Professional Upgrade version. Is it possible to do a clean install from it? (I have a preinstalled Windows 7 Home Premium on my pc). If not, what is the preferred product to do this?
View 9 Replies View RelatedI am currently running build 7600 of Windows 7, I did a clean install without formatting the drive over windows vista premium 64bit and then removed the windows.old folder via the directions found on this board. My question is, that when I download my copy of Windows 7 off of digitalriver (I'm a college student) what is it I need to do in order to have a clean install? I've heard numerous reports that say I wouldn't have to install anything because build 7600 is the final version, and all I would need to do is enter the product key given on my upgrade version.
View 9 Replies View RelatedI've purchased and downloaded the UPGRADE 64-bit version of Windows 7. I have a blank HDD waiting to go into my machine. Am i able to just do a clean install of this straight onto the new HDD, or do i need the full retail version of this?
I'm currently using XP Pro 32-bit on my existing HDD, hence getting a new one in preparation.
i purchased a crucial m4 256gb ssd coming in Wednesday anyways i was wondering how can i make a clean install of windows 7 64 bit on the SSD, i have my HDD backed up but unfortunately i lost my window's 7 cd... what can i do? is there a program i could use to transfer from my HDD to SSD, but with clean install? i have 480gb used on my HDD...
View 2 Replies View RelatedIs there anyway (at all) that I can convert my version of windows 32bit and all my software to 64 bit without doing a clean install?
View 3 Replies View Relatedi've had enough of 7, I use my PC for music and after months of installing/uninstalling/re installing/researching/driver checking etc. i've decided i'm just not going to get things working with 7.
I have my XP disc and i'm ready to do a clean install, but i'm struggling to get it going... what do I do!? Inserting the XP disc brings up the autopay but the option to install is greyed out, which I understand as it's a step down. However, when I press f12 on booting to try to boot my pc from disc it just locks on the boot menu. What can I do to get a clean install of XP going?
I have been having numerous problems over the past wk. The firewall won't stay on, can't do windows updates etc. I have run Vipre as my anti virus and also mbam and superantispyware and everything is coming back clean. Today I decided to just backup my documents etc and then do a clean install. Now the problem is that the DVD burner doesn't show up in the BIOS. It shows up in my computer and it's running fine. If I format it out of the computer can I get windows to install from that DVD drive?
View 2 Replies View RelatedI have been having a lot of blue screens for the past few weeks. I have tried running a disk check and memcheck and those didn't find any problems. I just did a fresh install of windows 7 64 bit and have been having the same problems.
View 9 Replies View Relatedi wanna Format my C:/ drive and Clean install Windows 7 beta..
im inserted W7 DVD and restarted my computer.. bt doesn't Boot From Windows 7 DVD .My first boot Devise is DVD rom.second Boot Devise is HDD...
I didn't notice until I tried 2 burns. Then I resorted to downloading elsewhere and after 3 more downloads I got the right file(verified by hash) for 64 bit Windows Pro English. Burned the iso to my thumb drive fine, seemed to install fine and fast on this system: [code] Have 2 500GB spinpoint F3s in raid 0 and 1(setup in bios correctly and in raid menu bios fine)190GB raid 0, 375GB raid 1 using Intel raid after mostly done with install it said it had to restart so it did, but since I used a USB thumb drive it tried booting from that again instead of finishing install. I redid the install after fixing partitions and it seemed to go fine this time I removed the drive when it restarted. I was actually finally in windows 7!After installing a couple drivers I needed I restarted then things went bad.Could no longer enter windows normally because once it loaded the screen went blank.It automatically installed gfx drivers but the monitor drivers aren't installed and I was incapable of installing them after 1-2 hours trying to figure out a way. Monitor didn't show up in device manager.Monitor is an Acer2051w.I could get into safemode and try to mess with stuff.I was able to uninstall video drivers then boot into windows normally but it would automatically install the same driver and I wouldn't be able to get back in again. Automatic driver installation was off by the way.
So I couldn't fix this so I decided to reinstall Windows 7. The install went through fine, said it had to restart to finish up and after restarting the screen would stay blank forever. Doesn't seem to be installing properly now.So I can't get it installed again, and when it was it wasn't working properly. I have the monitor drivers even but no way of installing them so Windows is screwing up setting a bad resolution/ settings for the display that I can't fix hence the blank screen issue.
I have a retail Upgrade DVD for Windows 7 Home Premium which I purchased. I did a clean install by wiping my hard drive using the format partition option on the Windows 7 DVD. I had Vista installed on the HDD before the upgrade so the installation program could "SEE" that I had a qualifying version of Windows to validate the upgrade key.Activation was successful.Now, I want to start a clean slate. However, I don't have Vista installed anymore, just Windows 7.Can I reinstall with an upgrade key on a blank, reformatted hard drive? Will activation pass?Or do I need to reformat with the installation program on the DVD?Finally, I made an image of my Vista operating system before I upgraded, do I need to restore the image so my Win 7 DVD can once again "SEE" the qualifying Windows version?There are forums out there that say different things, yes you can, no you can't, well it depends.
View 3 Replies View RelatedI have a couple questions I have been trying to hunt the answers down for. Im super paranoid considering the not so easy to find rules and regulations Microsoft has for its software.I currently have an OEM version of Windows 7 Home on my laptop. I was wondering if:
1. I can upgrade from a Windows 7 Home (which was pre-installed on my laptop) to Windows 7 Professional using Windows Upgrade Anytime? If so,
2. Will problems that I have on my current windows transfer to the upgraded version? If not,Is it possible to do a 'clean install' of the upgrade?
I am not sure if I am in the correct forum or not. Before I post all of my system details, etc., I wanted to ask a few questions about cleaning this new dell xps 17 L702x out and reinstalling the OS and getting the drivers from dell vs the cd's that came with it ? I have a few more questions about that, but wanted to make sure I was in the right place before spewing out all the details.
View 4 Replies View RelatedAs I will build a new computer, I need windows 7. (I only have Vista on my old)Is it, as described in this video, good enough to buy upgrade version for this?
View 1 Replies View RelatedWindows 7 Pro x86 (32-bit) Original installed OS OEM Age of system (hardware): 2010 December Age of OS installation: Two days. I did complete SFC /SCANNOW without any errors. I've run a diagnostic on the memory that didn't turn up anything and my case is running cool. I have several others from the same lot that are all working well (including the one I'm on now). I did get my first BSOD this time around after install of SP1 install without restart yet. After installing AVG (I know...) it occurred again. I can't really give this computer to anyone until it doesn't crash randomly.
View 5 Replies View RelatedI have a new, 120gb solid state drive I want to install windows 7 pro, 64-bit on. Does windows 7 take care of whatever formatting is needed automatically? Does it let me pick allocation size and type of formatting (e.g. NTSF versus another type)?
View 5 Replies View Related