I have a question about my Cooler Master Real Power M620. I have a lot of cables inside my computer to power my GTX 580. It has these cables hanging to it:
- one 8-pins power connector
- a two-6-pins to 8-pins adapter to cover the second 8-pins slot.
The point is that I have one 6-pins cable from my PSU and 2 molex to a 6-pins to the adapter.
The last bit requires the use of a lot of cables and adapters. Therefor my question is: would I be able to hook up my PSU with two 8-pins power connectors, thus getting rid of the unnecessary adapters?
Checked replacing the RAM to another slot, checked by replugging the video card, but still couldn't able to get the display, checked all power cables also that is well connected.
I have set the Power Options>System Settings - Define power buttons (When I press the power & sleep button) to "Do nothing", yet i can still shut down my desktop via Start>Shutdown and by pressing the physical power button.
My laptop was hooked up by broadband cable to the faceplate and was working fine, but now both cabled and wireless internet don't work, however I can connect to wifi on mobile. The troubleshooter does not run, it just reads error. I bought a brand new cable but still no luck, have tried undoing system updates but it has merely made it worse
This all started whenever I wanted to change my text size different by changing my DPI settings. What I did was right click, go to screen resolution, and clicked on "Make text and other items larger or smaller". From this I changed it to 100% from 125%. I noticed it had changed my font size to the 100%. It then made everything SUPER small when I changed my theme settings.Whenever I right click and go into personalization settings, I do the usual customizing to my likings. Since I want to save the theme, I do so by naming it, blah. Now I want to use the blah theme by click on it, and I do so. Everything is fine and dandy until I right click my desktop to refresh(out of habit). This is the before and after of the font sizes.
Before After
My workaround was to set a custom DPI setting, log off like it prompts me to, then changing it back to 100%, again prompting to do so. It is so annoying to do so.
What is the difference between dual link DVI and single link DVI cables? Would I see a noticeable difference if I switch to dual link cables? Would I benefit any at all from switching from single link to dual link?
I've done a lot of searches using variations of the above title and came up empty or just plain missed the answer.I'd like to know, if it is not asking too much, the following points:
1. What exactly is the function of Link State Power Management in the Power Options Advanced Settings, PCI Express?
2. What are the implications of using the options available:
a) Off.
b) Maximum power savings.
c) Moderate power savings.
d) Which option is the best selection for my Dell laptop.
I use my PC for audio production and I have a few external controller devices that are USB powered, for example a midi keyboard. I recently had to build PC due to a theft....long story short after building the new PC I've noticed that my USB buses have continual power to these external devices after I've powered down the PC. My old windows 7 PC did not do this. Is there a setting I can change to shut off power to the USB buses when I power off the PC? Or is this a hardware issue?
i've tried to set the option for pressing the power button to 'Do Nothing' so no body can shut the computer, and yet it shuts down by pressing the button, so why is that and how can i work this out?
Over the past 2 years my PC has been afflicted with random power off/power on/reboot events.It will go for months without these and then have multiples of the events in a day. (I had 8 of them 3 days ago.)I assume I have a hardware problem, but nothing has been found and I'm grasping at straws.The time between power off and power on is several seconds.I had assumed this rules out a software cause, but maybe I'm wrong. I know Windows can schedule a power off, but can it tell BIOS (or something) to power back on in a few seconds?I know blaming the power supply is a much more simple explanation, but then I'm left with explaining the intermittent nature of the failure.
From many days the battery icon is missing from the taskbar, the notification icon is greyed out even if the laptop is not on AC. i followed the the tutorial System Icons - Enable or Disable but nothing happened.
My computer wouldn't shut down, even with holding in the power button, and so I just let it run out the battery. Then it wont turn on. I tried holding down the power button to clear out any charge that might be remaining. I have managed to get it back on, but I have to make a connection at the clip where you plug the power button ribbon into the mobo. Also, this is the second time I have had to do this. The computer works fine afterwards...or seems to anyway.
My daughter has a Hp laptop and it was working fine, but the screen was coming apart. so my husband put it back together, Now it will not come on. It's getting some power but not coming on at the power button. The lights flashes when you push the button then nothing.
I just did a recent new build and have a SSD drive for my OS and some apps and a 1TB SATA drive for everything else. I installed windows and it installed it to C:, my SSD, but after thinking about it I believe it would be easier in the long run to have my OS/few apps on the SSD to be X: or something else since most apps/games default install to C:, which I want for my 1TB, so I won't have to edit it for every install. Will simply renaming the drive letter cause any problems (nothing installed now except ASUS MB drivers, EVGA drivers, and Firefox)?
I've decided to give my older laptop to a close family member. Since this computer was no longer used for business, no sensitive data is on the hard drive. The OS was upgraded to Win7 Home Premium from WinXP Pro SP3. My User Name was created and is still visible in CUsers, and I would like to change it to another entry. When this is attempted under User Accounts, Users"My User Name""New User Name" is the result. Is there any way of achieving Users"New User Name" without a clean install? I dread this option, since I would have to reinstall WinXP Pro then Win7 Premium Upgrade.
Ever since I changed to Win 7 my mp3 files will every once in a while will change to .TMP. I then have to change them back to mp3 by showing the extention and then editing the name to change it back. Why is it doing this? I have tried re-converting them to mp3 (dispite being mp3's) but it doesn't work.
Now, when I was volume leveling everything, 860 songs changed their extention to .TMP. Is there a way to get them back to mp3 without editing them one by one. And, again, why is it doing this.
First my PC just started to turn off itself like there was no power I changed the PSU to a new one, but when I started to get BSOD's, I made a fresh clean Win 7 64 bit Prof install, installed all the drivers all windows updates and now....BSOD's continue. I'm attaching all the files. W7F_16-01-2013.zip
I've installed the 32 bit version and it's running fine and after reading up on it I would like to change to the 64 bit version, is this possible without doing a complete reinstall or would I need to start from scratch?
using windows 7, I recently sent a picture with print (attatched it to email) it was sent in jpg and sender could open it today I sent a similar document w/picture (saved the very same way, or so I think) and it was unreadable in ccf mode.
I downloaded the IE9 update a couple of weeks ago, and since then I can't download anything from anywhere. I can't download files from the web, I can't download pictures that are attached in emails I receive in Hotmail or anything. If I click on anything that leads to a download, IE9 stops working and a pop-up message tells me the same. Then it shuts down all instances of IE, and restarts one browser.
IE 9 ....Google is set to homepage in english, But now it sometimes changes to norwegain. Yes I live in norway but I dont want it to change from english. And yes I did tools internet options set homepage.
So what i want to do is change my key functions on my keyboard (example: rather than ctrl-c i want to use command-c "aka windows-c")but i don't want to change the command key to be ctrl but make it so windows recognizes it as copy when i push command-c also want to change other stuff like ctrl-alt-del and paste and closing windows
the reason i don't want to change command to ctrl is if im in an application that i need to control i want to be able to hit the actual ctrl key.
i basically want to make my windows feel a little more like macintosh not in the way of looks but function of keys. hope it makes sense and hope someone knows how to do it.