Cards Says Read Only Not Getting Data Browsing
Dec 18, 2012My sd card says read only. how do i change that. not sure what happened but i had centurylink.
View 2 Replies
ADVERTISEMENT
Can't Read SDHC Cards Anymore
Apr 19, 2012Have a windows 7 desktop pc and all of a sudden my pc wont read sdhc cards. I have read to disable the sdhc host but when my card readers are plugged in i cant see anything that says "sdhc host" but did disable and then reenable the card reader itself. I also read about uninstall of generic sd/mmc usb device but that did not fix the problem also. I have been having an issue where when i reset my pc it sits at "Marvel adaptor init 88se61xx" for a few minutes then loads so not sure if that is effecting the sdhc cards.
View 2 Replies View RelatedPc Won't Read Data Cds
Mar 10, 2011I have a brand new notebook with windows 7 and a brand new external CD-ROM drive.
View 1 Replies View RelatedRAID5 Data Read In Windows 7?
Aug 15, 2012Can we read RAID5 data on windows 7?
View 1 Replies View RelatedAccess A System Partition To Read And Copy Data?
Jul 16, 2012How can I access a system partition to read and copy data? Two partitions were merged together and ended up as a system partition. All of my data files are in there.
View 5 Replies View RelatedError Occurred While Attempting To Read Boot Configuration Data
Jan 13, 2013I'm getting this every time I boot up my computer. It happened after I had my computer on "sleep". When I woke up and tried to open my laptop, it shut off and showed me this:
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows installation disc an restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: BootBCD
Status: 0xc0000001
Info: An error occurred while attempting to read the boot configuration data.
It simply takes me to the same screen when I hold "F8". So I cannot get the "Repair your computer." Option. I do not have the windows installation disc. Also, all I can do is basically start up my computer and it takes me to that screen every time.
An Error Occurred While Attempting To Read The Boot Configuration Data
Jan 27, 2011im getting that message upon startup. Im running windows 7.It requests for the windows recovery CD to be inserted, so when I put the CD in to boot I get a "windows is loading files" then a starting windows with the windows logo then just a black screen with a cursor, I left it like this several times for at least an hour an nothing happened.I can't press F8 to access safe mode etc, nothing will happen.Pressing F12 to boot from CD just does the same thing as putting the CD in normally.
View 1 Replies View RelatedAn Error Occurred While Attempting To Read The Boot Configuration Data
Jan 13, 2013I'm getting this every time I boot up my computer.It happened after I had my computer on "sleep". When I woke up and tried to open my laptop, it shut off and showed me this:Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows installation disc an restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: BootBCD
Status: 0xc000000
1Info: An error occurred while attempting to read the boot configuration data.
[code]....
An Error Occurred While Attempting To Read The Boot Configuration Data
Apr 20, 2012I have built my own computer and I have a ASUS P9X79 Pro motherboard, an Asus GT440 graphics card and a Corsair 120gb SSD. I'm trying to get win 7 to install on this brand new SSD. No other drives connected. The BIOS which has been flashed and is up to date finds both the DVD drive and the SSD. I've set boot priority to the DVD drive and I keep getting this MSG below. My SSD is brand new and this would be new install........ Windows failed to start. A recent hardware or software change might be the cause. o
File:EFIMicrosoftBootBCD
STATUS: 0xc0000178
Info: An error occurred while attempting to read the boot configuration data.
An Error Occurred While Attempting To Read The Boot Configuration Data - 0xc0000001
Aug 7, 2010I'm getting this error after a forced shut down. I'm told to insert installation disk and repair but I don't get this option, I'm just returned to the same error message. I have tried restarting and loading windows from the installation disc. I'm told that windows is loading and the windows logo appears but after a while it goes to a black screen with only the mouse cursor showing.
File: ootBCD
Status: 0xc0000001
Info: an errr occurred while attempting to read the boot configuration data
Windows 7 Won't Load - Error Occurred While Attempting To Read Boot Configuration Data
Feb 11, 2011I'm trying to get a Toshiba satellite L300D to start Win-7. It gives an error message:
"An error occurred while attempting to read the boot configuration data"
Not really sure what that means, but my guess is thats a file that it isn't finding. My pic isn't very clear, the Status is 0xc000000f, again not sure what that means. This machine has been running and well behaved for a long time.
Change Flash Drive Read Only Read Write?
Sep 17, 2012change it to read and write mode, and also to remove write procted in it.
View 1 Replies View RelatedBest Type Of DVD To Use For Read-only And Read / Write Applications?
Apr 12, 2011What's the best type of DVD to use for read-only and read/write applications? I'm a little out-of-date on this, haven't bought any in awhile. I remember things like DVD-R/RW and DVD+RW and such. I have a new machine running Win7, and an older laptop running XP.
View 10 Replies View RelatedMoving Boot Data To Data Drive
Aug 18, 2012So I've been using my 64GB ssd as my windows 7 boot drive and i have a 1TB hdd as my data drive. Recently the my computer has begun to freeze up with errors like "explorer.exe" has stopped responding or "windows" has stopped responding and half of the time when i try to boot it says it cant find windows. This has lead me to believe that my ssd is dying despite being only a year old. I need to RMA my ssd but to do that i would be losing my boot drive for weeks. So I thought id try to create a system image so that i can simply put my boot drive on my hdd, but when i try to create the image it says that the image would be 711GB because its including all of my hdd (which contains all my user libraries and downloads). My question is: how do I make windows stop thinking that my hdd is a system drive so that I can create a reasonably sized image, or more generally: how can i easily move my boot drive to my hdd? Also, I've read some posts about using "easyBCD" to accomplish the latter but I'm not sure that's exactly what i need in this situation.
View 4 Replies View RelatedAmd Data Change Update New Data To Dmi?
Dec 3, 2009just did a fresh install of Windows 7 Ultimate on my second pc, all went well apart from it gets to amd data change update new data to dmi then..... stops, it wont budge, i haven't touched anything in the bios or added any new hardwear.When i reboot, same again, went into the bios and made sure i have it set to boot from hard drive first.
View 6 Replies View RelatedStoring Data On Data Drive?
Jun 2, 2011forum i have a question. I have a kingston 30 gb ssd i use as my windows drive, and a 750 gb wd hdd for data/game storage. I have heard that you can ghost a file on the data drive into the x86 folder so that all new installs go there and then you still recieve most of the benefits of your ssd w/o clogging it up. I have an amd based system (dont know if that matters or not)
View 1 Replies View RelatedDVD Writer Cannot Read DVD But Read Cd?
Jun 5, 2011my dvd writer reads cds but not DVDs in windows 7
View 2 Replies View RelatedSLI With 2 Different Cards Same GPU
Oct 17, 2009I have two 9500GT video cards one id Evga and one is BFG they are both 1GB DDR2. I have looked into it but you experts will know. I think it's possible to set up a crossfire configuration. It might not be worth doing but i would mostly do it for fun and to see if I can get it working. My current mobo supports it and would like to play with it.
Is it possible with the same GPU but different companies and possibly slightly different specs on the rest of the card? I thought if it the same GPU you could do it.
http://www.newegg.com/Product/Product.aspx?Item=N82E16814143150
http://www.newegg.com/Product/Product.aspx?Item=N82E16814130395
Also you might know if I can make a USB install flash drive with professional and use it to install home premium or ultimate as long as I have the licence keys?
A Disk Read Error Has Occurred But Disk Can Be Read
Jan 11, 2011TLDR: I get the "A disk read error occurred" error but the system disk is readable and checks OK in the recovery USB. So, I have two hard drives--a terabyte drive with some data on it and a smaller drive with the Windows 7 installation on it--and a USB drive. I made the USB drive into a recovery USB using the instructions here Installing Windows 7 System Recovery into USB Flash Drive | Raymond.CC Blog with the addendum found in the comments. I made a system image of the smaller drive via the control panel and then put the image in the terabyte drive. I then replaced my smaller hard drive with a new drive of a comparable size.In order to restore the drive, I booted into the recovery USB, formatted the new hard drive with ntfs, made it active, and ran wbadmin start recovery -version:xxx -items:C: -itemtype:Volume -backupTarget:C: -recoveryTarget: where C was the terabyte drive and D is the new drive. I may have the drives mixed up here, but I assure you I had them correct when I actually ran the command
After a reset, I got some generic error so I went back into the bios, and set the new drive to be at the top of all boot lists, and then rebooted. It was at this time I got the above error. I feared that my drive was actually DOA, so I booted back into the recovery. I did a D:;dir and saw that all of my old files did indeed exist, so I figure it was a boot issue. I ran the boot repair utility in the recovery menu and it said there were no errors and I should restart. I didn't restart, and instead ran a chkdsk D: /f and found no errors. I did a bootsect /nt60 /all /mbr and restarted and still nothing changed. I even tried a "bcdedit /timeout 10" and I do not see the boot loader before getting this error. Not sure if that is expected or not but I'll throw that in here.
2 Different Nvidia Cards?
Jul 31, 2009Just a thought. I'm currently running an XFX 260 Black Edition on my Asus P5Q Pro MB.
I still have my old card- A BFG 8800GTS OC 512MB.
I kept meaning to ebay it but never got round to it.
Is there any way I could usefuly use it in my present set up?
Possible To Put 2 Video-cards In One Pc?
Jun 5, 2012Is it possible to put a Nvidea GTX 560 + Nvidea GTX 670 in one pc, and get them work both with one monitor?
View 7 Replies View RelatedATI Cards And Samsung LCD
May 5, 2009i just installed the latest build of Windows 7 (build 7100). and there are a few problems with my graphics options. There are 2 systems that i tried this on and both are having the same problem. The first setup has a Ati Radeon X1650 by MSI, and the drivers install, signed by WDDM. Now the monitor/tv that i am using is a 42inch LCD TV, and has the 1920x1080 resolution, that is its native resolution. Windows 7, supports the resolution and has it as the recommended resolution, however, when i select it, my monitor says "mode not supported" this is the same problem i have with the HD2600XT card from ATI.
Both of these cards work in Vista Ultimate, Vista Home Premium, Vista Business, and XP Pro SP3 and XP Home SP3, and even tried Server 2008 and server 2003. all of those OS's work with the native resolution on the monitor except the Windows 7 builds. anyone have an idea why this would be??
also, for the HD2600XT i did install the latest ati driver 9-4, and nothing is fixed. right now i am running it at 1280x768, but its skewed.
if anyone has any info on this it would be great, as i have tried everything.
i have also tried installing the 9-3 drivers on both cards, manually and using the installs. the manual way was to unzip the driver package and in device manager install the drivers myself.
The one system i have plugged into it now is a Shuttle Barebone SG31G2B, 4 GB of ddr2/800 ram, quad core q6600 2.4ghz, and the hd 2600xt.
What Are Smart Cards?
Oct 31, 2009Microsoft says that Smart Cards can be used in conjunction with Encypting File System (EFS) to keep the encryption key off the computer.
What are smart cards, and is that the only it can be done? Why not a regular SD card or flash drive?
Pci Cards And XP Mode
Sep 30, 2009Will pci cards such as ones for connecting CCTV cameras to a PC work in Win 7 XP mode.
View 1 Replies View RelatedCards Not Seen In USB Card Reader
Dec 30, 2011When I put a CF or an SDHC card in the internal (USB) cardreaderor in an external (USB) cardreader, those cards are not seen, although the readers are seen alright.When I disconnect the internal reader, put a card in it, and connect it again to USB, the card is seen. Take the card out, put it in again; no card. Same with he external reader.I checked Device Manager on possible wrong settings, but couldn't find anything.
View 6 Replies View RelatedNo Memory Cards Working
Jul 11, 2011The problem is that no kinds of storage cards are currently working perfect on my computer.For an example no phones can be connected, have tryed 2 htc's with microsd cards, and a sony ericson with an m2 card, and same problem. Also if i try to open any SD cards, like camera it dosent work.The thing is that it comes up as removable drive, but when i try to open it it just says please insert card. I have tryed deleting, installing reformatting drivers, and cards like crazy and its the same. I have also tryed changing the drive letters around but the issue is the same.The only thing that makes the work is the following: If i leave the card in the cardreader, or a phone connected, then restarts the pc whitout removing the card or phone, then it works when its rebooted. but asoon as i remove the card/phone and reinsert them the issue is still there "please insert card".I have even changed the motherboard, cpu, and memory, and formated the computer 3 times but still same issue. So im thinking that windows is installing wrong driver or something? [code] Also the issue was the same on my old computer also running windows 7 that had a socket 775 build.
View 9 Replies View RelatedToshiba Flash Cards
Mar 9, 2009Dont know if it should be in here Toshiba Flash Cards is a program that runs when you press 'FN' it displays a top flash card thingy that allows you to use the FN -> F2 etc... keys cant get this to work on windows 7 though anyone got any ideas ill try a few more things i think might be able to fix it but does anyone else have any ideas?
UPDATE: seems to be a error with KeNotify.exe...... When i press FN it crashes KeNotify
UPDATE 2: Running in Compatibility and/or Running as administrator still makes it crash.
Information About Capture Cards And How To Use Them
Jan 15, 2013i usually record PC games using fraps and it got me thinking to how do people record console footage and then put it on the computer.The problem is i dont know the first thing about gaming capture cards and how they work, i do know however that some of them are PCI cards.
1. if a console is connected to a T.V how is the footage captured from the console to a PC?
2. Does using capture cards also provide audio or do you need certain cables (3.5 jacks, hdmis, etc)
2 Graphic Cards ATI + NVidia
May 22, 2009It is possible to run ATI and nVidia cards together in Win 7? Because of nVidia PhysX. I know this was't possible on Vista's but I heard rumors that this is possible now.
View 2 Replies View RelatedUse 2 Different Video Cards On A HTPC?
Nov 29, 2011I built a HTPC with a video card that does DVI and hdmi. The motherboard has a VGA.
But I also need either: s-video or composite What should I do? I don't want to like "downgrade" the video card and just use an old one for everything. Can I run them both? Like switch back and forth? "Simultaneous" is not required.
Also, I would already be using the PCIE 2.0x16 for the video card. I have PCIEx1 and PCI slots open. EDIT: I found this... [URL]
Would this work in letting me switch between the onboard video and the video card?
Use 2 Graphics Cards At The Same Time?
May 23, 2012i have got a new PC and was wondering if i could use my Nvidia Geforce GT 440 with my Nvidia Geforce gt 220 at the same time? I want this setup so i can get more fps on my games. I have a custom built gaming PC and i really want good gaming proformance.
View 6 Replies View Related