I have 3 laptops 1 x Win XP and 2 X Win 7. I have installed this printer on 2 of the laptops no problem, the 3rd l bought today networked fine and can print if the other printer(XP) is turned on. I wanted to install the printer on the new Win7 laptop so I can sometimes just plug the printer into it and print, to save turning other laptop on. But the printer driver will not load!! Each time the installation goes fine, but when l look in printers and faxes the yellow exclamation mark is there.If l connect the usb cable to the new laptop it says installing printer, but then says printer driver not installed.
I have an Acer Aspire 5740G and for some reason it hasn't allowed me to install my new wireless internet usb stick. I have an older usb stick already installed that I use, but it won't let me install this new one which works fine on my PC.
When I plug in the usb stick it makes that beep beep noise to indicate it detects the device but when I go into my computer the device pops up and then suddenly disappears.
I have my new HP eprint printer installed on my PC however when I plug the usb cable into my laptop after installing the CD it won't connect. This is during the setup when it says "connect usb cable" or whatever - but NOTHING HAPPENS!
Need to install Mitsubishi printer cp3020du on pc with windows 7 64 bits. I downloaded the newest driver from Mitsubishi but when I try to install system looks for a inf file n can't find in folder where I have the download.
My daughter has an XP PC and an XP laptop that talks OK to a wireless printer. She now has a Win7 laptop. Am I right in thinking that the Win7 laptop cannot be made to 'see' the wireless printer because it has been set up on XP? It would be helpful to know before I get over there to spend some time investigating.
I have got a Epson SX235W. It can be used with either cable or wifi. I have beenunsuccesfull in setting the wireless side up, cable is ok. The laptop does not find it when scanning to look for it during the setup phase. I uninstalled it and run setup again but only tried to do the wireless part and still no joy. The Epson site is no good and does n The WiFi on the computer and printer is switched on and I had the printer on the table beside the laptop so distance apart was not an issue. I have read that I need to go to register the mac address with the computer but dont know how to do this or even find the mac address for the printer.
I am not able to print in program(ie works, notepad ect.) to my network printer. The printer is a Kodak ESP 5250 connected via usb to my desktop cpu. Desktop is hp running win vista, laptop is an hp running Windows 7. All printer sharing is enabled. I have another laptop( aser) running Windows 7, it's hooked up the same way and it prints just fine. Here's the tricky part, I can get my hp laptop to print a test page from within the kodak program, but it won't print from within any other program. It acts like it spooled but then nothing come out.
I want to install my Okidata printer on my new computer running Windows 7 Ultimate 64 bits. I have two cables, LPT1 and USB to connect my printer to the computer. My computer not came with LPT, so I wanted to connect it using USB cable. I chose the option to install new printer. The first thing Windows asks me is to choose the port on a list. The list shows the following ports only: LPT1 to LPT3, COM1 to COM4 and XPSPort(local). No USB on that list. Must I configure something that I missed?
I have found the HP 2000c XP print drivers included on the Win XP Pro install disc work for Vista/Win 7. The component names start with HPV and there is an NTPrint.inf which contains the HP 2000C printer description. I used these components, and installed my networked (via a HP print server) HP 2000c using the JetDirect 7.1 Network Setup Wizard. I have all functions and services working.
i have a 1315 hp printer. i downloaded the hp printing software from hp website for windows7 64 bit. during installation after the i agree page, the installation box suddenly vanishes. i tried disabling anti-virus but no go.
I have a Sharp printer/copier (MX3501N connected wirelessly) whose driver will not completely download from Sharpusa.com as it says I have an unsupported operating system. Windows 7 64 bit is what we have are running, I downloaded the driver for the 64bit Windows 7 and Windows 7 is supported by Sharp for this printer.
The only printer in my network is on a computer running XP, and my 7 laptop needs to connect to it. How do I do this? I already used my XP computer to set up a workgroup, but I can't figure out how to connect to it on 7.
I have a brand new printer Canon IP4850. The driver installed like a dream on an old desktop win XP, on my laptop which is Win 7 32bit. Only on the Acer Desktop Win 7 home edition 64bit it refuses. Windows claim it encountered a "catastrophical error" (????) and error 0x080000FFFF. I tried the driver on the cd which came with the printer, I tried the download from the Canon site: nothing. Microsoft claims it is a Canon problem and Canon states it is a Microsoft problem. I tried to rename the softwaredistribution folder (result: 0). As to me there is something in the setup of Windows (Acer only delivers image dvd's, not original Windows dvd's) which stops drivers from installing. As this desktop is the printerserver of the house, I would like to get it to work!
I have a HP Laserjet 3050 PCL 5. The scanner software worked great with XP but won't install with Windows 7. Has anyone found an alternate software? The printer is an all in one and it doesn't make sense to have to replace it because of the software. HP has been no help.
i have window 7 and install printer hp laserjet p1007 on same pc which is on lan network. The said printer was working properly till date but from today it does not print any document.
manually i follow the instructions and manage to install.device manager show all driver install without any exclations mark. but when i check in printer and fax it shows printer icon with exclations mark. when i right click at printer icon and propertise - it shows that printer woring properly but i cannot use the printer. look like the printer driver its not working at all.. my question is "why still got exclations mark at my printer icon at printer and device."?
I have recently started using Win 7 on a Toshiba laptop (4gig Ram, i5 processor) but have been unable to connect with the HP Laserjet 1200. I have followed the threads provided in this forum but am unable to print to the 1200. The printer is connected via a USB port. The printer/USB port is recognized as USB printing support. I have previously loaded the HP laserjet 1200 PCL5 driver and have now tried loading the HP Universal Printing PCL6 driver. In both situations the printer driver is seen under the printers/fax (in the Devices/Printers page) as either the Laserjet 1200 PCL5 or the HP PCL6.
I cannot find a driver when trying to install the printer over my home network.Printer is installed and working on Dell XP 3100 Printer has prevously been installed via usb on Tosh Win 7 Printer & file sharing are set up on both computers Files and printers can be seen from the Tosh that are on the Dell. When i try to install, I get error message that a driver cannot be found. Remeber the printer is installed locally on both machines... so drivers are present. Does anyone know how to direct to the driver? I do not have an printer install disc... installed from download.
