I have a customer's laptop that will not start. Upon start up, it looks like bootmgr is corrupted or missing. I have managed to boot using a Windows 7 disc and get into the CMD promt. However, when I try to run "diskpart" it just gets stuck and will not give me a prompt to start erasing/formatting the drive(s). I have tried re-installing Win7, as well as tried repairing so that I could roll back the drive, and none of those work. This is an HP G72 laptop (Win7 - Core I-3).
while formatting c dirve by using system repair disk and using command prompt after step 8 ,i am getting message formatting 3M. can't format. drive is write protected.
So I am wiping my hard drive by booting with the Windows disk and going to command prompt. I successfully formatted drive C:, about 100 MB of system files and D:, about 500 GB or the bulk of my hard rive. These were the same hard drive, but separate partitions apparently. In Windows it just appears as C: altogether hiding the system files so you don't do something stupid. After I had cleared those two drives, I thought everything was gone until I remembered that it started me out in X:sources. I went back to it and was like what the heck is this? I went to the root directory, X: and typed dir for directory. There was an executable setup file, and four directories including the "sources" one, Program files, Windows, and Users. The whole drive was about 30,000,000 bytes which is I guess 30 MB. It's volume label was called "Boot". I tried to format it, and it said "Cannot format. This volume is write protected." What is this X: drive and is there a command to remove the write protection? Also, what would happen if I did eliminate this data? Could I still install Windows back from the DVD or would that not be possible without those them?
I have an external harddisk that is encrypted using TrueCrypt. Each time I plug it in Windows prompts me to format the disk because it doesn't have any recognizable file system. Vista didn't use to do this. I suppose it's because of the UAC changes and a user couldn't normally do this in Vista. How to disable this prompt in Windows 7?
Can I format a Hard Drive with Windows 7 using a 2000 format disk. If so, what are the prompts i see and action on boot-up before I use the format C. Done it before but just forgot
how i can format my pen drive if window 7 and XP is unable to format it. they are saying files are in use. i have kept window xp, photoshop and some other software in it. Now please tell me how can i delete these items or format it.
My computer (Toshiba Satellite running Windows 7 Home Premium) acquired some sort of terrible virus and shut itself down. When I try to turn it on, it goes into startup repair, and startup repair always fails. I have tried every single system restore point, and that fails too. When I try to start it in any of the safe modes, it simply goes back to startup repair and fails again.
He was able to access C: in command prompt. All my files are in their original locations and haven't been corrupted, but there are also four folders with names like xisdfl83lkd02 (seriously) which definitely weren't there before and presumably contain whatever has crippled my precious laptop. Whenever he tried to delete those folders, the command prompt looked like it had accepted the delete command, but then when he went back into C they were still there. So the bad files are immortal or something.
He said he was able to move things around, so I should get an external hard drive to back up my files, wipe the computer back to factory settings, then put my files back on it from the external hard drive. Well, now I have an external hard drive but don't have him around to do this.
I have absolutely no experience with command prompt, and I've read a bunch of tutorials on how to use it, but they aren't dumbed down enough for me to understand them. I need someone to walk me through it.
I can access the command prompt, but it goes into X:\sources\recovery\Tools> as a starting line. The thing at the top says Administrator: X:\windows\system32\cmd.exe. I didn't even know X was a real drive. I try to get it to C and it just goes back to X. When I type cd E:\ or cd F:\ trying to figure out where my external hard drive is, E says "The device is not ready" and F takes me right back to X:\sources\recovery\Tools>.
How do I get to the directory where I can find my files and move them to the hard drive?
I have a fresh install of Windows 7 x64 Ultimate on my PC and there are times that when I reboot my computer or turn it on from an off state I get the Autoplay prompt for my External HDD. This occurrence is totally random and it doesn't happen sometimes. It just gets annoying that when you boot up you see that prompt and you have to close it every now and then.I have an Asus P8Z68-V motherboard.
there are alot of turorials on how to make a custom backround on your usb drive (and everyone who plugs it in will see this backround). I have read that this wont work on vista so i wonder if it works on Windows 7?
also:
how can i disable this annoying prompt where it asks about scanning the flash driver for errors? I get it everytime i plug some usb device in and when i scan i get "no errors" anyway.
This might be a silly question, but I'm having a terrible time trying to access files on the host machine (Windows 7) through the command prompt within the Virtual Machine (XP). I can see the drives in Explorer (e.g. C on VAULT_CORE_I&) and I see sclientc in the prompt, but I have no idea how to access the drive from the prompt.
I'm trying to help out a colleague who runs an old FORTRAN compiler and does alot of his engineering calcs with it, and would not work in Windows 7 (but it is working in XP Mode). However, I'd like to keep the files on his Windows 7 machine and not contain them inside the virtual machine.
I have two hard disks-500GB and 80GB,so installed win 7 on 500GB HDD and 80GB was kept as slave.And i locked a drive present in 80GB using Bitlocker.Since week when i use win 7 ,after 20 min the display screen turned to black screen.So installed XP on 80GB drive.Now when i try to open the drive which i locked using Bitlocker is asking for format,that drive has important information.How can i retrieve the data from that drive?
Trying to install windows 7 on my new hard drive since my old one died on me, I set it to boot from disc and it just loads up the cmd prompt. I'm sure I just have to enter a cmd but I can't seem to find anything that works. I've searched around of course but haven't had any luck so I give up.
My system got infected with some kind of virus, which severely slowed down the PC and caused me a lot of frustration. So I simply installed Win 7 on my H: drive. Now I want to completely format the C: drive, the location of the previous Win 7 install. During the install itself, for some reason there was no option to format the C: drive and re-install the windows there. And now that I'm trying to format C: drive, I get an error message: 'Windows was unable to complete the format'.
How can I wipe clean the C: drive and keep it for general use, with the Win7 now on my H: drive?
i had windows xp pro before and i had my c drive cleaned out and windows 7 starter installed by someone. it never worked good since then. after much frustration now i want to remove windows 7 starter and reinstall xp pro. is there any way i can perform thsi myself.
When I try to access drive D it says this "you need to format the disk in drive d before you can use it". I don't even know whats in Drive D, my computer is new. But when I right click properties for used space it says 0 bytes and free space 0 bytes. But it still says its full. [URL]. After I press cancel [URL]. Drive Space [URL]. What should I do?
I have 2 format programs recommended by GEEK, easus and mini tool partition...they will not allow me to do partition...The disk layout is C: system and files D: hp recovery data E:hp files...When I start I can do resize and get an allocated file, then on the allocated file I click create and then I get message this is not a primary, and I cannot find a way to change it....and if I use the other program(mini) it says there is no boot files.
Every 5 minutes or so , a pop up saying "You need to format the disk in drive g before you can use it" comes up. Problem is, I have no disk in drive g, and nothing connected to my usb ports. So i have no idea what this means. Add to this that the device manager keeps refreshing and will not let me click anything.
With the new pc parts I just got I also got a wd 1TB hardrive I want to use the whole drive as a single formatted drive can Windows 7 do this because I am told that XP can't handle that large of a single format.
C drive contains vista home basic...D drive contains some data and E drive contains new Windows 7 7260
now...i am not using vista anymore..so can i format my c drive directly...
and one more thing..i have lenovo y510 laptop...and it has a one key recovery option...so if i format my c drive....will i be able to use that one key recovery feature in future ???
and apart from 3 partition...i have one more partition which is hidden...in computer management tool...it shows "OEM".
so what do you say ??? is it safe to format my C drive now to get more hdd space ??? but please...i should be able to use "one key recovery".
I am getting this popup: "You need to format the disk in drive x before you can use it". In my case it's drive H:. I have unchecked "Use AutoPlay for all media and devices" in the Control Panel. I did this a week ago when I started getting these popups and it seemed to work till today when it all started up again. I just noticed that the popup is not appearing, but the drive is appearing and disappearing from my file manager (I use Q-dir).
This weekend a installed the windows 7 64bit over a vista 32bit. During the installation I left my Samsung S2 HD 500gb plugged in.After the installation the windows didn't find a mass storage controller drive and my HD appeared as Local Drive ( F: ). When I try to access it, this msg comes up: you need to format the disk in drive f before you can use it. I tried plugging in all usb port I could find. And even the win xp 32bit showed the same msg. I also tried the "Easy Recovery Pro". But it didn't worked. When a click on any of the recovery option the software doesnot find any hard drive in my pc. Then I tried the "GetDataBack for NTFS". After 24 hours of scanning, it didn't find any of my files. Tonight, I will try the "diskdigger" and the "Recuva". But I am not putting too much faith on those software due some post I read here. I really need to recover same work data.
It ran okay for a while, but started to freeze up. Anything that was in the RAM would load fine, but nothing new would load from the HDD.I decided to install Windows 7 x32 on the machine to see if anything changed. It seemed to run normally, so I thought that maybe something went awry in the first installation.I tried installing x64 again, but this time, when I went to format the drive, I got the following error:"Windows cannot format your drive (0x80070057)"I've tried this several times, deleted all partitions on the drive, and tried again. I get the same error each time. I'm beginning to think maybe the drive is faulty.
i had window 7 RC at drive C, msdn window 7 at drive D, everytime i booted, i have three option, two 7,one early os. is anyone can tell me how to uninstall RC? i tried to format drive C,but it did not sucessful.
