Format C Drive Using Command Prompt?
Jun 14, 2012while formatting c dirve by using system repair disk and using command prompt after step 8 ,i am getting message formatting 3M. can't format. drive is write protected.
View 3 Replies
ADVERTISEMENT
Format HDD From Command Prompt / X Drive Or Boot Volume
Dec 3, 2012So I am wiping my hard drive by booting with the Windows disk and going to command prompt. I successfully formatted drive C:, about 100 MB of system files and D:, about 500 GB or the bulk of my hard rive. These were the same hard drive, but separate partitions apparently. In Windows it just appears as C: altogether hiding the system files so you don't do something stupid. After I had cleared those two drives, I thought everything was gone until I remembered that it started me out in X:sources. I went back to it and was like what the heck is this? I went to the root directory, X: and typed dir for directory. There was an executable setup file, and four directories including the "sources" one, Program files, Windows, and Users. The whole drive was about 30,000,000 bytes which is I guess 30 MB. It's volume label was called "Boot". I tried to format it, and it said "Cannot format. This volume is write protected." What is this X: drive and is there a command to remove the write protection? Also, what would happen if I did eliminate this data? Could I still install Windows back from the DVD or would that not be possible without those them?
View 1 Replies View RelatedHow To Format Windows 7 By Command Prompt
Jan 24, 2013how to format windows 7 by command prompt
View 3 Replies View RelatedCan't Get Command Prompt Out Of Drive X
Aug 10, 2011My computer (Toshiba Satellite running Windows 7 Home Premium) acquired some sort of terrible virus and shut itself down. When I try to turn it on, it goes into startup repair, and startup repair always fails. I have tried every single system restore point, and that fails too. When I try to start it in any of the safe modes, it simply goes back to startup repair and fails again.
He was able to access C: in command prompt. All my files are in their original locations and haven't been corrupted, but there are also four folders with names like xisdfl83lkd02 (seriously) which definitely weren't there before and presumably contain whatever has crippled my precious laptop. Whenever he tried to delete those folders, the command prompt looked like it had accepted the delete command, but then when he went back into C they were still there. So the bad files are immortal or something.
He said he was able to move things around, so I should get an external hard drive to back up my files, wipe the computer back to factory settings, then put my files back on it from the external hard drive. Well, now I have an external hard drive but don't have him around to do this.
I have absolutely no experience with command prompt, and I've read a bunch of tutorials on how to use it, but they aren't dumbed down enough for me to understand them. I need someone to walk me through it.
I can access the command prompt, but it goes into X:\sources\recovery\Tools> as a starting line. The thing at the top says Administrator: X:\windows\system32\cmd.exe. I didn't even know X was a real drive. I try to get it to C and it just goes back to X. When I type cd E:\ or cd F:\ trying to figure out where my external hard drive is, E says "The device is not ready" and F takes me right back to X:\sources\recovery\Tools>.
How do I get to the directory where I can find my files and move them to the hard drive?
Access Host Drive From Command Prompt In Xp Mode
Dec 8, 2009This might be a silly question, but I'm having a terrible time trying to access files on the host machine (Windows 7) through the command prompt within the Virtual Machine (XP). I can see the drives in Explorer (e.g. C on VAULT_CORE_I&) and I see sclientc in the prompt, but I have no idea how to access the drive from the prompt.
I'm trying to help out a colleague who runs an old FORTRAN compiler and does alot of his engineering calcs with it, and would not work in Windows 7 (but it is working in XP Mode). However, I'd like to keep the files on his Windows 7 machine and not contain them inside the virtual machine.
Windows 7 Installation On New Hard Drive - Command Prompt Pops Up
Sep 23, 2012Trying to install windows 7 on my new hard drive since my old one died on me, I set it to boot from disc and it just loads up the cmd prompt. I'm sure I just have to enter a cmd but I can't seem to find anything that works. I've searched around of course but haven't had any luck so I give up.
View 4 Replies View RelatedCannot Format C Drive In CMD Prompt
Jun 26, 2012I have a customer's laptop that will not start. Upon start up, it looks like bootmgr is corrupted or missing. I have managed to boot using a Windows 7 disc and get into the CMD promt. However, when I try to run "diskpart" it just gets stuck and will not give me a prompt to start erasing/formatting the drive(s). I have tried re-installing Win7, as well as tried repairing so that I could roll back the drive, and none of those work. This is an HP G72 laptop (Win7 - Core I-3).
View 1 Replies View RelatedCreate A Batch File For Windows 7 To Run A Command (elevated ) In Command Prompt?
Apr 27, 2011Trying to create a batch file for Windows 7 to run a command (elevated ) in command prompt?User: is an administrator or in administrator group ( but actual administrator account may be disabled )essentially need to be able to double click the *****.bat filehave it open up cmd in elevated ( run as administrator ) , run the command in the dos window and reboot the computer.
View 2 Replies View RelatedCommand To Change The Path Using Environment Variable From Command Prompt?
Jun 9, 2012In UNIX, for changing the directory path, there is "cd" command. .This works fine in windows 7 too.. But the problem comes when we are trying to change the path using environment variables. .
In UNIX, cd $JAVA_HOME changes the path to the value set for JAVA_HOME,
Similarly is there any command in Windows which does the trick from command prompt for changing path using Environment variables. .
Run Administrative Command Prompt From Command Prompt
Jul 22, 2011Ok So I got myself into a unique bind here. I was trying to install some custom system files (for a theme) and I did it wrong and now I cant open explorer.exe . I dont want to goto a backup because this is a easy fix. (in my view). So I need to know how to run command prompt with administrative privleges from command prompt.
I am trying to do this command: copy explorer.exe C:Windows
So if there is also another command I can just tack onto that that gives me admin rights to do it. I would be happy.
Msconfig From Command Prompt / Or Commands For Command Promt?
Jan 9, 2012Does any one know how to get the win.ini missing fixed when opening bootcfg/msconfig not found. Also How to change "forcing changes in msconifg" to "not forcing changes" in msconfig from command prompt, as well as opening msconfig from command prompt w/ dos command(s) / paramteters.
View 1 Replies View RelatedIs The Full Format With Command FORMAT FS=NTFS Overkill
Sep 5, 2011My drive passed SMART extended self test that scans the entire disk surface. Is the full format with command FORMAT FS=NTFS overkill?
View 4 Replies View RelatedHow To Use Command Prompt?
Apr 3, 2011I was just wondering id it was a good idea to have an extensive knowledge on the windows command prompt and how to use it. If so can anyone share some links to where I could see some tutorials?
View 6 Replies View RelatedCommand Prompt
Jan 11, 2009How to Open a Command Prompt in Windows 7 ?
View 0 Replies View RelatedRun CD ROM From Command Prompt?
Jun 23, 2011how do you run CD ROM from command prompt
View 1 Replies View RelatedWhen Try To Run A .jar File Get A Command Prompt
Feb 8, 2012when i try to run a .jar file i get a command prompt that disapeers after about half a second how come?
View 1 Replies View RelatedCommand Prompt Will Not Open?
Jun 23, 2011I'm having an issue on my computer where command prompt will not open. I looked in the system32 folder and cmd.exe is missing, however there is cmd.exe.mui is there. I also tried to run hijackthis to get a log, however the program keeps spitting out a blank log when I click save log.
View 14 Replies View RelatedCommand Prompt Not Appearing?
Aug 28, 2011I am trying to run command prompt in windows 7 professional, but it is not appearing in front of me.
1. I tried to run it from Start --> Accessories --> Command Prompt
2. I tried to run by typing cmd on the start menu and then finding the .exe file
3. I tried to run using Run command by typing cmd in Run dialog box
4. I tried to run it from C:/Windows/system32 folder
5. I also tried to run it using right click and then selecting Run as Administrator
But whatever I tried to do I cannot see the command prompt window.Also, when I run the task manager, I can only see the cmd.exe running in the 'processes tab' and that too one new process for each time I have clicked on the cmd.exe.But it does not show cmd.exe in the 'applications tab' where it should be showing.
Command Prompt Pop-up Not Getting Performance
Jan 6, 2013Alright so for the past few days my girlfriend's computer has been having a very quick command-prompt-looking pop-up within 10 minutes of starting up. We weren't able to catch a glimpse of what it said until today, as the pop up is literally less than a second long.We recorded her screen and were able to pause at the time of the pop up, discovering what the pop up is.
View 3 Replies View RelatedTip For Elevated Command Prompt?
Feb 9, 2012This probably is not new to many, but I find it useful.There are times I want an elevated command prompt. I usually type in "cmd", right click on it and run as administrator. If you need an elevated command prompt now and then, simply create a shortcut to "cmd". Right click on the shortcut, left click on properties. Click the shortcut tab and select "advanced". Finally, you can select "run as administrator".Like I said, just something I didn't think about before, but it's handy to have.
View 6 Replies View RelatedPartition A HDD In Command Prompt?
Apr 30, 2012Trying to partition a HDD to install an OS. All was going well till I tried format the active partition - error: Parameter is incorrect
View 6 Replies View RelatedCommand Prompt Missing?
Nov 11, 2012so today i tried to open my command prompt because i tend to allocate more ram to minecraft whenever i play. I searched for it, and it was not even there. i searched cmd, went into accessories, and even did SHIFT-RC and it said "application not found". so is there any way i can get this back?
View 2 Replies View RelatedElevated Command Prompt Over SSH?
Jan 27, 2013I'm using a SSH server to remotely access my notebook from work. It works well for SFTP and remote command line access using a dedicated, non-admin, user account.Problem is when I want to run something that requires admin permission under that connection. The server runs cmd.exe under the context of a non-admin user I've created for it, so I'm limited in what I can do. Question is, how can I "elevate" that remote command prompt to execute admin-only programs and commands? UAC of course will not help under that conditions.
View 5 Replies View RelatedCommand Prompt - Personalize
Dec 30, 2009How to Personalize the Command Prompt Window ?
View 0 Replies View RelatedCommand Prompt At Startup
Nov 24, 2008How to Open a Command Prompt at Startup in Windows 7 ?
View 0 Replies View RelatedElevated Command Prompt
Jan 20, 2009How to Open a Elevated Command Prompt in Windows 7 ?
View 0 Replies View RelatedLanguage Through Command Prompt?
Feb 23, 2012Is this Possible to check Operating System Language through Command Prompt ?
View 4 Replies View RelatedCMD Command Prompt Not Working
Mar 9, 2011When I type a command in the CMD I get a message saying that the command is not recognized as a internal, external.
View 6 Replies View RelatedHow To Go To Command Prompt While Starting Up First Your Pc
Apr 30, 2011how can i go to command prompt while starting first the pc. because i can't open my pc, its boot manager is missing. my pc cannot boot.
View 4 Replies View RelatedCommand Prompt Not Appearing
Jan 14, 2010When trying to open a CMD prompt it does not appear, even when run as Administrator. When checking in Windows Task Manager it appears in the list of Processes but in list of Applications.
View 15 Replies View RelatedCommand Prompt Appear And Then Disappear?
Apr 17, 2012Why does my command prompt appear and then disappear?
View 3 Replies View Related