Can`t Install Windows 7 On Macbook Pro
Dec 15, 2010
i`ve tried to install Windows 7 Ultimate x64 on my Macbook Pro 13" (mid 2010) with a brand new "Intel X-25-M 80Gb SSD" which i have just replaced from the older Hitachi HDD.I had no problems at all installing win 7 on the HDD so the problem came after i put the SSD in the Macbook.This is what i have done so far,
1. Created a windows partion in Bootcamp from OS X.
2. Starting the win 7 installation DVD and choose language, time etc.
3. When asked for upgrade or custom i choose custom install.
Now here`s the problem, when i`m asked where i wan`t to install windows there are no drives at all in the list, it`s completely empty and it`s also asking me for the needed drivers?I have done some research myself and have found that several others having the same problem, that the installation manager isn`t detecting any disk. There is more info in this thread from Apple support forum: Apple - Support - Discussions - 2010 13" MBP 2.4GHz. No support for 3rd ...
View 2 Replies
ADVERTISEMENT
Feb 8, 2012
I am considering installing Windows 7 Professional on a Macbook Pro using Bootcamp and partitioning the hard drive. I understand that when you do that your computer is then prone to viruses. But I was wondering, if you get a virus using Windows 7 on a Mac, does it only effect the Windows Partition or does it effect the whole Hard Drive?
View 1 Replies
View Related
Jul 19, 2009
I have the latest macbook pro 15 inch. I have installed windows 7 build 7100 on it via bootcamp. Most things are working but the box is running very hot. At idle I see 75C on the GPU and 60C on the processor. The fans will not come on until 80C. I don't want to run my computer at 80C. I talked to Apple and they told me that there was no way to change the EFI settings. They also told me that Windows 7 had no way to manage the fan settings via Apple's EFI. Is this true?
I downloaded speedfan and it was not able to control the fans.
View 8 Replies
View Related
Feb 24, 2010
i've got a macbook running Windows 7, and i want to dualboot it and get osx back on there. should be easy, osx on a macbook, right? **** me.
i did a bit of homework first, and reviewed what other people have done for dualbooting, but all of the threads are ancient and address different specific issues so here are the steps i went through:
-created a second partition in Windows 7, ntfs, made it active
-rebooted with an authentic osx snow leopard disc
-osx installation startup began
-went into disk utility to format it to "journalled" and get this error: "Volume Erase failed with the error: Could not modify partition map"
it won't let you install until the disk is formatted correctly..
View 4 Replies
View Related
Sep 14, 2012
Which sound drivers supported for win7 apple macbook 13"
View 1 Replies
View Related
Nov 28, 2012
i just formatted my MacBook with windows 7 but finding it difficult to download it's sound drivers.
View 1 Replies
View Related
Aug 15, 2011
I'm having a very hard time finding wireless drivers for my macbook pro running windows 7?
View 2 Replies
View Related
Apr 7, 2012
how it work right click on macbook pro on running win 7 os
View 1 Replies
View Related
Nov 4, 2012
while trying to install windows 7 on a separate partition on my macbook pro, i somehow managed to format the whole hdd, then i went on and installed the windows. now i need to get back my os x (the mac didn't come with a boot cd).
View 3 Replies
View Related
Jan 30, 2011
I have my mbp for 9 months, snow leopard should find automatically every pc on the network but It never found my home desktop everytime, only some times.
but I could easily connect to it using automount maker or in finder with go -> connect to server. I haven't change anything (at least as far as i know) and now my mac can't find or connect to my Windows 7 desktop...!
my desktop see's my mac on the network and can connect to its shared folders but my mac can't see the desktop. my other laptops at home runing windows xp and ubuntu can see the desktop too, so i don't know what is wrong! workgroup is the same.
this is definitely a problem from my desktop as my mac can connect to other pcs too.
View 1 Replies
View Related
Feb 24, 2012
i need a sound driver macbook pro a1278 for w7 64bit??
View 2 Replies
View Related
Sep 28, 2012
I have a Macbook Pro with a US keyboard. When I run Windows 7 which sadly I need to do...how can I get the euro symbol? Is it possible to assign a key to do this, or change the dollar key to give a euro symbol.
View 2 Replies
View Related
Jan 2, 2010
I have MacBook Pro (lastest one-Snow Leopard installed)
Using Boot Camp, I install Windows 7 build 7600 Ultimate 32 bit
What I know, I have 4GB RAM but why, in the system properties, it shows that only 2.72GB RAM is usable?Why this is happening? I can't enjoy 4GB RAM for my works (e.g GAMES )
Any idea anybody?
View 9 Replies
View Related
May 1, 2009
I downloaded the RC ISO and burned it to a DVD and tried to install it on my MacBook Pro, but the DVD won't boot. I hold down C during boot, they gray screen comes up and the disc spins real fast for a while, but nothing happens.
I have read that the ISO created isn't ISO compliant so you have to create an ISO that is. I followed the instructions here to do that. This didn't make a difference.
I didn't have any problems installing the Beta, but the RC won't boot.
View 1 Replies
View Related
Aug 29, 2010
I already have the envy, you can see my specs. I want to know if it would be worth switching to a MacBook Pro. If I did, I would want windows 7 on it for sure. Is it worth it? I love windows 7, but I also love the compatibility that Apple makes with all its stuff. Apple makes decent hardware, HP seems like their machines are cheap and not well built.
View 6 Replies
View Related
Nov 24, 2010
I would like to dual boot Windows 7 and Mac OS X 10.6 on my Macbook Laptop. I want Windows 7 to be the main OS on the laptop with the Mac OS on a smaller partition. I've done dual booting before but never on a Mac.
View 2 Replies
View Related
Dec 3, 2009
I have had a Windows workgroup for years, linking PCs and Macs as well as a Linkstation Network Drive through a Time Capsule Router/Hard Drive Combo. Immediately after upgrading from Vista Business to Windows 7 Professional on my Sony Vaio VGN-Z750D, I can see the Time Capsule and MacBook but can not access the MacBook Pro. I am able to access the Linkstation and the Time Capsule. However, the system does not ask me for a username and password when I try to access the MacBook Pro, and I get an error message that Windows cannot access the MacBook. The problem seems to be on the Windows 7 end, for I am able to access the Sony on the MacBook Pro.
The workgroup name is the same on all computers. I had to reset the workgroup name on the Sony, because for some reason the Windows 7 upgrade renamed the workgroup name to WORKGROUP without asking. I reset it to the name used on all our mchines. The only variable changed is the Windows 7 upgrade.
View 1 Replies
View Related
Sep 13, 2011
driver for magic mouse for macbook air for windows 7 operating
View 1 Replies
View Related
Apr 28, 2012
I am trying to access my wife's macbook hard drive via my Windows computer using the Vantec SATA/IDE to USB 2.0 Adapter. The Apple techs said they could not get the drive to register when they hooked it up. However, we gave it a good drying with blow dryerThe adapter works fine and all the correct drivers installedI am in disk management and the 250GB drive seems to be showing up. However, it is not showing up in My Computer and right click shows "assign a letter" is grayed out.
View 2 Replies
View Related
Feb 13, 2013
I am getting an error "cannot install" 0x80070714 when I try to install windows 7 into a clean disk and the installation just stops..
View 3 Replies
View Related
Apr 6, 2012
After I tried to make a dual boot with Ubuntu and Windows 7 Ultimate (64-bit), Windows now does not boot. I have tried to reinstall and repair the HDD but the disc fails to recognize my HDD (Western Digital Scorpio Black 500 GB). My HDD is Basic, has 3 primary partitions and 1 extended (3 logical). Ubuntu 11.10 can boot fine.
View 2 Replies
View Related
Feb 20, 2011
Per microsoft I need to do try a repair install from original disk. Is there a difference between running repair install from Windows or booting from original disk then selecting upgrade install? Is one or the other preferred? Directions say both attempt to preserve installed programs, but not all drivers, and both require reinstalling all the 60 or so windows updates released after my disk. so no differences there.
View 9 Replies
View Related
Jan 2, 2011
I've built a brand new PC and decided that I would like to install windows 7 64 bit on my SSD, I got a disk+key from my university before christmas so that'd i'd be ready once i'd built it.
I built the PC yesterday and realised that I'd left my external DVD drive at my university accommodation, I'm at my parents house for christmas break so that's a few weeks left. I can't really wait that long so I used my parents laptop (which I'm posting from now) to turn the disk into an .iso and use the microsoft USB utility to make a USB stick that i could install from.
However when I tried the install gets to 'installing features' and gives 'windows cannot install required files' error code 0x80070570 I looked the code up on google which sent me to a lot of threads here, so far I've tried:
Taking all but 1 stick of ram out and the graphics card. Reseting the bios to default Installing again without rebooting after error. using cmd to select the right partition
View 4 Replies
View Related
Sep 7, 2012
First off this is a newly built computer, all fresh components. aftercleaning/activating the hdd via shift +f10 at Windows 7 setup,(which took me a day to figure out) i was very excited to see my hdd available for Windows 7 installation. as i proceed windows does its thing, after installing its time for the first restart. it restarts right back to the initial windows 7 setup ive done a lot of research, and majority of the problems seem to be the boot priority in bios. so i made sure that it was usb-hdd, then hard drive. (Windows 7 on flash drive for me, no dvd burner available). still the same thing, right back to initial setup. i tried maybe to remove the flash drive during the 10 second countdown to restart, but when it restarts, the windows splash screen comes up and then blue screens and restarts real quick. cant see what the error is on bsodthere have been a couple different start up issues, "windows did not start properly" "select version of windows to start from" (or something to that effect.) but its all the same outcome. windows 7 just wont finish installation
View 3 Replies
View Related
Jan 30, 2012
I'm working on a re-install of all components following a complete corruption of the boot sector on my drive which could not be fixed with repairs. The last time I installed everything fresh, I had no issues. Between then and now, there have been no hardware changes on my system, but now I am having issues installing the IDT Codecs. I keep getting an error along the following lines: Quote: ExitError: Error=Device Object not present, restart the system and run setup again. Running under compatibility mode, and running drivers from both the motherboard CD and the manufacturer website both have the same effect. The CD, when booted, says "This OS not support!" and only contains 32-bit vista codecs. ECS' website download indicates the IDT drivers as being compatible with Windows 7. Both do not work. It is almost as if the hardware "disappeared," despite the fact that I was using the drivers quite successfully till just 2 days ago, when the boot sector went kaput.
Windows has installed its own default set, which do nothing to power the 8mm jacks which I use with my speakers, but instead put sound through the HDMI, which is useless because I use a dedicated graphics card. I have tried uninstalling this codec and re-installing IDT, to no effect. Windows replaces with its own default codec.I have referenced this thread here, but offered solutions do not seem to work for me: Intel IDT Audio Driver will not install
View 5 Replies
View Related
Nov 24, 2011
How do I install a Super Multi Drive to a mini computer HP 110? I have the device and the installation disk, however, the computer does not seem to be detecting it or providing an installation wizard for me to proceed.
View 3 Replies
View Related
Feb 3, 2010
Does anyone know whether there is a difference in performance between doing a clean install of Windows 7 vs upgrading Vista? Any better stability? I'm just wondering whether it's worth the trouble of the clean install.
View 3 Replies
View Related
May 28, 2012
NT Kernel & System rises to top of list in task manager and then just totally stops installs from proceeding. I have fought NT Kernel & System on 3 computers running Win 7 x64 ever since Win 7 has been out. No one yet that I know of has been able to solve the issue. I now need to install Java and can't because of NT Kernel & System stops it. I have tried everything on every forum and sites l find with Google searches. Nothing has worked yet.
View 2 Replies
View Related
Feb 6, 2013
Install LG Super multi drive install disc for windows
View 1 Replies
View Related
Feb 13, 2013
I am part of a large organization that has a large amount of computers on our domain controller. I have Administrative rights to the computers only, and network access rights on our network. I keep a number of computers up to date, including various 3rd-party programs (i.e. java, flash, etc), and I currently manually remotely connect to each computer and install the updates to the programs from a network share, then run Windows update, select all the critical updates (as well as all the applicable optional updates), then disconnect and move on to the next one. Needless to say, time quickly adds up.
View 3 Replies
View Related
Jun 7, 2011
you will need VISTA install disc and a windows 7 install disk..first upgrade XP to vista then upgrade XP to windows 7
View 1 Replies
View Related
