Recently i was inherited a relatively new computer from a store (they had to change it fast, so no time for repairing, they bought a new one) the computer has a "NTLDR not found"problem, there is nothing useful in the hard drive so i chose to just delete everything and install Win7 to get a fresh start.So... after ages of loading i start the setup and i get a message telling me that the driver for the optical unit is not found, requesting me toinstall a new one, the drive is a "Lite-On iHAS124-04 Y" and the only driver i could fin is this one:[URL]X.EXE.htmlI put the BL0X.exe file in a pen drive and the windows installerdoesn't recognize the driver, the file runs on my other computer (but i get an error saying that i don't have the right hard drive, because i don't), and the installation won'tcontinue
I have recently finished building my computer and brought a copy of windows 7 (home premium) 64bit to go with it. But when I try to install I never get past "collecting information" where I am being asked to "Select A Driver To Install" as a driver for my "DVD Device" is missing (apparently). I assumed that the driver I needed would be on my motherboard driver disk. I clicked the disk and told it to "rescan" and it only said "There's no device drivers were found. Make sure that the installation media contains the correct drivers". When I navigate directly to the sata,raid & ide drivers sometimes I get a: nVidia nForce Serial ATA Controller on the screen but when I click on that it says the same thing after about 10 seconds or tells me it cannot install and I need to get a new driver from my distributor (I have tried the drivers of the Asus website but the same result). What do I do?
I've completed a new custom build, but have had problems with BSOD from the beginning with any installation of Intel Graphics drivers or the installation of any graphics card.
When I first completed the build, the XFX-7950 Black was installed. I booted to BIOS without issue, but when I inserted the Windows 7 (64 bit) it would boot through the windows logo screen but immediately BSOD right after going to the first install screen.
I removed the graphics card, and was able to complete the full Windows install without issue. I updated Windows and the drivers on the system but as soon as I installed the Intel 3000 Graphics driver, it would BSOD on every restart. I recovered back prior to the Graphics driver install and installed all other drivers. I updated the BIOS to the latest version.
I have reattempted the XFX 7950 multiple times in different slots, but with the same results. I also attempted my Radeon HD 4550 from my old computer but it gave the same results. It always boots through the Windows logo screen, but BSOD within a few seconds of reaching the password screen.
I broke down and installed Driver Whiz, which did detect multiple outdated drivers that I had not caught, but none of these fix the issues.
I've attached the requested zip. I don't think all BSOD's are showing up, as I've had to use recovery points after installed drivers didn't work. The last .dmp on 19 JUL was a Intel Graphics driver install attempt that I pulled off in safe mode before recovering back to the pre-driver point.
System: ASUS P8Z68-V Pro/GEN 3 Intel 2600K XFX R7950 Black Edition OCZ 850W Crucial 128 GB SSD Seagate Barracuda 1 TB HD Corsair H100 Windows 7 64 bit (full)
After I tried to make a dual boot with Ubuntu and Windows 7 Ultimate (64-bit), Windows now does not boot. I have tried to reinstall and repair the HDD but the disc fails to recognize my HDD (Western Digital Scorpio Black 500 GB). My HDD is Basic, has 3 primary partitions and 1 extended (3 logical). Ubuntu 11.10 can boot fine.
Per microsoft I need to do try a repair install from original disk. Is there a difference between running repair install from Windows or booting from original disk then selecting upgrade install? Is one or the other preferred? Directions say both attempt to preserve installed programs, but not all drivers, and both require reinstalling all the 60 or so windows updates released after my disk. so no differences there.
I have changed the ram and that fixed most NOw this one when w7 starts it looses parts like no disc drives no device manager no modem and so its a restart and they return untiull next time then it all stops again.some programs run slow internet pages are real slow changeing.I cant install word packages it crashes and now on install it comes up with cant find network.
I have a few small .exe files that I received by e-mail. When I click on them to install the program I get a message saying Windows is preventing running the file for security reasons. I know the file is free of viruses and want to install it. I am told there is a setting somewhere to turn this security feature "off"--I am the only user of my PC and want this annoyance turned off.
I am running Windows 7 Pro 64-bit on a stand-alone PC with a hardwired Internet connection (no router).
I've built a brand new PC and decided that I would like to install windows 7 64 bit on my SSD, I got a disk+key from my university before christmas so that'd i'd be ready once i'd built it.
I built the PC yesterday and realised that I'd left my external DVD drive at my university accommodation, I'm at my parents house for christmas break so that's a few weeks left. I can't really wait that long so I used my parents laptop (which I'm posting from now) to turn the disk into an .iso and use the microsoft USB utility to make a USB stick that i could install from.
However when I tried the install gets to 'installing features' and gives 'windows cannot install required files' error code 0x80070570 I looked the code up on google which sent me to a lot of threads here, so far I've tried:
Taking all but 1 stick of ram out and the graphics card. Reseting the bios to default Installing again without rebooting after error. using cmd to select the right partition
tell me if a re-install from a system image file on my notebook is as good as a clean install from say a retail disk.I can not format all my drive and start a fresh. Can my System image file become glitchy or infected with a virus.?
First off this is a newly built computer, all fresh components. aftercleaning/activating the hdd via shift +f10 at Windows 7 setup,(which took me a day to figure out) i was very excited to see my hdd available for Windows 7 installation. as i proceed windows does its thing, after installing its time for the first restart. it restarts right back to the initial windows 7 setup ive done a lot of research, and majority of the problems seem to be the boot priority in bios. so i made sure that it was usb-hdd, then hard drive. (Windows 7 on flash drive for me, no dvd burner available). still the same thing, right back to initial setup. i tried maybe to remove the flash drive during the 10 second countdown to restart, but when it restarts, the windows splash screen comes up and then blue screens and restarts real quick. cant see what the error is on bsodthere have been a couple different start up issues, "windows did not start properly" "select version of windows to start from" (or something to that effect.) but its all the same outcome. windows 7 just wont finish installation
I'm working on a re-install of all components following a complete corruption of the boot sector on my drive which could not be fixed with repairs. The last time I installed everything fresh, I had no issues. Between then and now, there have been no hardware changes on my system, but now I am having issues installing the IDT Codecs. I keep getting an error along the following lines: Quote: ExitError: Error=Device Object not present, restart the system and run setup again. Running under compatibility mode, and running drivers from both the motherboard CD and the manufacturer website both have the same effect. The CD, when booted, says "This OS not support!" and only contains 32-bit vista codecs. ECS' website download indicates the IDT drivers as being compatible with Windows 7. Both do not work. It is almost as if the hardware "disappeared," despite the fact that I was using the drivers quite successfully till just 2 days ago, when the boot sector went kaput.
Windows has installed its own default set, which do nothing to power the 8mm jacks which I use with my speakers, but instead put sound through the HDMI, which is useless because I use a dedicated graphics card. I have tried uninstalling this codec and re-installing IDT, to no effect. Windows replaces with its own default codec.I have referenced this thread here, but offered solutions do not seem to work for me: Intel IDT Audio Driver will not install
How do I install a Super Multi Drive to a mini computer HP 110? I have the device and the installation disk, however, the computer does not seem to be detecting it or providing an installation wizard for me to proceed.
Does anyone know whether there is a difference in performance between doing a clean install of Windows 7 vs upgrading Vista? Any better stability? I'm just wondering whether it's worth the trouble of the clean install.
NT Kernel & System rises to top of list in task manager and then just totally stops installs from proceeding. I have fought NT Kernel & System on 3 computers running Win 7 x64 ever since Win 7 has been out. No one yet that I know of has been able to solve the issue. I now need to install Java and can't because of NT Kernel & System stops it. I have tried everything on every forum and sites l find with Google searches. Nothing has worked yet.
I am part of a large organization that has a large amount of computers on our domain controller. I have Administrative rights to the computers only, and network access rights on our network. I keep a number of computers up to date, including various 3rd-party programs (i.e. java, flash, etc), and I currently manually remotely connect to each computer and install the updates to the programs from a network share, then run Windows update, select all the critical updates (as well as all the applicable optional updates), then disconnect and move on to the next one. Needless to say, time quickly adds up.
I have seen a lot on clean installs but all guides are from like 2009. Is clean install still a way to install windows 7 with upgrade disc on a new hdd? since i have a hdd with vista on it and i have the licence how do i install 7 with the licence and a black hdd?
I am trying to install office 2007 as part of a system rebuild after installing a new hard drive. I get a window saying install was successful, I can open power point or excel but when I try to open word it hangs up at the word logo page. I have done remove programs in control panel, I have used revo uninstall to try to clean the registry. I suspect a corrupted fragment in the registry but don't know how to get at it.
one of my co-workers wants me to get rid of some viruses and install office 2010 home and student on her computer with the key she bought. her computer runs windows 7 64-bit. after backing up her data, i finally ended up doing a factory reinstall from the backup partition. so i downloaded all windows updates and installed antivirus and firewall software. then i downloaded the office 2010 trial and tried to install it. it seems to begin installing without any problems. then a splash screen for powerpoint appears. it says that its "processing" and does that for about 20 minutes and then there is a balloon that pops up saying that office is downloading files. after all that happens, an error message appears that says something like "powerpoint cannot be opened. please try again later or repair this software in the control panel" with no sort of error code. i then tried repairing it from control panel which claims to complete successfully. so i restart and try to install again and the same thing happens all over again. if i try opening word, excel, powerpoint or onenote the splash screen appears and does the same thing that i described powerpoint was doing. ive tried uninstalling and reinstalling to no avail. i also tried installing the 60 day trial for office 2007 that came preloaded with the computer and then installing office 2010 over it. same thing happened.
I have a problem with my laptop when trying to re-install Office 2013 preview edition - basically the initial install failed for some reason and can I can neither remove or install this software leaving me in some sort of Microsoft limbo.Someone I know suggested logging onto the "my account" section of the Microsoft site and actually deactivating the install however that has not solved the problem?CCleaner has also been run to try and remove any redundant registry entries however again that has not solved my problem.
my Windows 7 professional install seemed kind of lame after some years so I decided to install a new and clean one. I noted down the product-ID from my computers properties because I thought that was the key (right next to it it says change key, so I thought that must be the key).After the new install I realied that it is not equivalent to the key as the ID has less letters.Is there a chance to get the key from the "old" folder that is generated if you install a new windows over an old one?Or is there a chance to get to the key from the product ID? because I have no clue where I put the key..
I get as far as connecting USB - Windows acknowledges the connection but then never finishes the installation. Downloading and installing a driver from HP site didn't help.Know that I had originally following HP's instructions and attempted install w/o CD and with the printer USB connected during first installation. This failed same as all subsequent installs. I'm also running XP mode on this machine but had not started XP at the time of printer install.
I just did a fresh windows 7 reinstall on my laptop, the problem is, it doesn't seem to have any drivers. So the computer also can't recognize USB and there is no WIFI network adapter installed. My laptop has no optic drive, how will I be able to install the proper drivers without internet and without USB access? A friend tried to get bluetooth working, but his phone couldn't find my laptop and vice versa.
I have a Toshiba Satellite Laptop and I installed Windows 7 Build 7100 on it.
However, Open GL games do not work, and I have the ATI 8.56 graphics driver installed and I am trying to upgrade it to the latest 8.61. However, after I run the installer, my screen does not blink and once installation is complete, I do not see a change in the driver version - and catalyst is not installed as well.
However, when i am trying to re-install it says the drivers are already installed. Any ideas as to whats going wrong? Its a 32-bit OS. I cannot run any OpenGL games, they fail saying it could not load OpenGL.
With Win7 I cannot install the HP driver such that I can even install the printer. I point at the file I loaded from HP but the printer installer says this isn't the right file
i have a canon scanner and it keeps having a pop up box that says i need to intall a wia driver i went to the website of canon located my scanner and downloaded something but it must not have been the right thing cause it still not working?
