Can't Access Internet Although Connect - IE Terminates?
Dec 14, 2012
I had a problem on my Windows 7 desktop earlier this week - Windows crashed on startup. I managed to get round it by selecting the option to start windows at the last good point (sorry can't remember the exact wording). Windows is up and running, but I can't connect to the internet - although:
- My desktop icon (and TP-Link) both say I'm connected to the internet
- when I troubleshoot (from inside the control panel) - it says that there's not a problem
- when I select Internet options -> Connections -> set-up it replys with "You are already connected to the internet"?
But:
- when I start internet explorer - it pauses for a few seconds then crashes.
- when I start Chrome - any website gives me a error 137 (err_Name_resolution_failed).
anyway, after charging it up and turning it on, i started to install programmes and other bits and bobs. e.g ituens, flash player. just the usual essentials. i used the laptop to watch videos on Internet, genenral browing such as facebook, so in short, the internet was working fine. just before i went to bed that night i installed avg security (free version) and ran a full scan. when the scan finished, i put the laptop into hibernate, and went to sleep! happy in the knowledge my new gizmo was running smoothly!
just before i woke up i heard the laptop turn off as it had run out of charge. so i plugged it in and charged it up, then turned it on. this is where the problem starts...i connected via wifi however the logo at the bottom right of the screen showed the signal strength meter on empty, with a yellow star covering it. i clicked the icon, and it said, 'not connected, connections are available' and below shows im connected with 5/5 signal strength, but on 'limited access'.
1) there might be a problem with the driver for the local area connection adapter
2)there might be a problem with the driver for the wireless network connection adapter
there are 28 updates, but im unable to update them as i have no internet connection. i also cant connect via the ethernet cable.i cant roll back the drivers as there are no previously installed ones, and i cant update them as i am already up to date.my other laptop (acer aspire 5630 running on vista) works perfectly fine using wifi and the ethernet cable, so i honestly dont know whats wrong. after reading things on my acer about ways to fix the problem i came to the decision to restore the laptop to the time of my first installation which was adobe flash player (which i installed the day before.) i was unable to do a full factory reset as the only options available are to either restore to a backup, or re-install windows (which requires a disc, which i dont have). i also didnt configure a backup as i had only had the laptop a day!
My laptop will connect perfectly fine to my home network, other private networks, and many public hotspots. But there seems to be an issue recently with a few local hotspots around town here (Starbucks, McDonalds). I can go to one Starbucks and connect perfectly fine, then drive right down the street to another and while I am connected, it says I have no internet access. I've been able to connect perfectly fine here before, but suddenly this problem has continued. I'm completely at a loss for what to do. I've rebooted, disabled and re-enabled the network card, tried to troubleshoot the problem (which results in no information). The darned thing shows me that I am connected with terrific signal strength, but no internet access.
Windows: Microsoft Windows 7 Home Edition, Version 6.1.7600 Internet Explorer: 8.0.7600.16385 Memory (RAM): 2943 MB CPU Info: Pentium(R) Dual-Core CPU T4400 @ 2.20GHz CPU Speed: 111.1 MHz Sound Card: Speakers (Realtek High Definiti Display Adapters: NVIDIA GeForce 8200M G | NVIDIA GeForce 8200M G | RDPDD Chained DD | RDP Encoder Mirror Driver | RDP Reflector Display Driver Monitors: 1x; Generic PnP Monitor | Screen Resolution: 1366 X 768 - 32 bit Network: Network Present Network Adapters: Microsoft Virtual WiFi Miniport Adapter | 802.11bgn 1T1R Mini Card Wireless Adapter | NVIDIA nForce 10/100 Mbps Ethernet CD / DVD Drives: E: HL-DT-STDVDRAM GT10N COM Ports: NOT Present LPT Ports: NOT Present Mouse: 5 Button Wheel Mouse Present Hard Disks: C: 133.7GB | D: 89.1GB Hard Disks - Free: C: 89.4GB | D: 88.5GB USB Controllers: 4 host controllers. Firewire (1394): Not Detected PCMCIA (Laptops): Not Installed Manufacturer: American Megatrends Inc. Product Make: A4000 AC Power Status: OffLine BIOS Info: | | Time Zone: Pacific Standard Time Battery: High Motherboard: Micro-Star International A4000 Modem: Not detected
Everywhere in my house my internet works but the second i go in my room it stops. It is still connected it just says no internet access. My parents computer works in my room. Is there like a setting I can change to help make it work or is it something with my actual internet?
So yesterday my internet was working fine, but today when I returned and got it out of standby, I could not connect to the internet. It says "limited access" when I try to connect to the wireless, and when I try to connect with an ethernet cable nothing happens.If I troubleshoot, Windows is unable to resolve it. The problem it says is:There might be a problem with the driver for the Wireless Network Connection adapter.There might be a problem with the driver for the Local Area Connection Adapter.
I have sony laptop, i have install the internet driver, but i cant access network. i connect through wifi and i have all info of wifi eg. Username and pasword but that shows no internet access so
I have a Dell Laptop and use a MiFi internet connection. For some reason I can't connect to the internet since last night. I see that it says my IPV4 and IPV6 connections have "no Internet and Network access".
For some reason my router and modem will not show correctly on my dell inspirion one desktop. Im running windows 7 and here are the net work connection deatils
Connection -specific DNS Belkin Description Realtek PCIe GBE Family Controller Physical Address 00-00-00-00-00-00 DCHP Enabled Yes Ipv4 Address 192.168.2.2 Ipv4 Subnet Mask 255.255.255.0 Lease obtained Wednesday, November 10, 2010 9:45 PM Lease Expires Sunday, December 18, 2146 4:17 AM IPv4 Default Gateway 192.168.2.1 Ipv4 DHCP Server 192.168.2.1 Ipv4 DNS Server 192.168.2.1 IPv4 WINS Server NetBIOS over Tcpip enabled Yes
The Connection was working about ten days ago and then suddenly stopped and read as an unidentified network no internet access. at one point is was not receiving packets but now it is but it still says no internet access on the IPv4 Connectivity. Media state is also enabled and the speed is 100.0 Mbps when i troubleshoot it says windows cant identify problem but in the details it says default gateway is available. when i use the cmd prompt ipconfig/all my local ethernet adapter has a physical address of all zeros.
My internet is connected to a laptop downstairs as well as mine (sometimes but rarely). I often cant connect. It comes up with a box that says "Connect to a Network" and for options, "Troubleshoot problems" or "Tell me more about Internet connection problems". I click "Troubleshoot problems" about 5,000 times a day (no joke) and about 20 of those times it fixes the problem. The other times it does nothing and I have to go shut off the downstairs computer and unplug and plug back in the router about 10 times. Then sometimes is works for 10 minutes or so, and sometimes it doesn't. If I ever do get it working, it never ever stays working. Most times when the internet does connect, it works for about 30 seconds then shows a yellow triangle warning said with an exclamation mark stating "limited access". My SGS2 phone connects just fine. So does the laptop downstairs and any other gadgets except for my desktop! This is frustrating as anything!
I am trying to configure Remote Desktop Access to work over the internet. Remote Desktop Access works on my local network.
Both of my computers are on Windows 7 Professionnal. My router is a Belkin F9K1002.
I followed the official widows tutorial. I forwarded the necessary port on my router (I switched from port 3389 to 50000, in case 3389 was blocked by my isp).
Every time I try to connect I get
"Remote Desktop can't connect to the remote computer for one of these reasons:
1)Remote access to the server is not enabled
2)The remote computer is turned off
3)The remote computer is not available on the network Make sure the remote computer is turned on and connected to the network, and that remote access is enabled."
For the past few months, I have been accessing the internet with my laptop's wifi through my neighbor's password-protected network (with his permission). I also sometimes go online using another neighborhood network which does NOT have a security key.As of today, I can view networks and connect to both of these (as well as others), but I can't get online. I get the "No Internet access" message when I connect to any network.When I go to the command prompt and type ipconfig /all, I get this for IPv4 address: 192.168.1.9(Preferred) and I cannot successfully ping any ip addresses.
[code] I never had this issue on Windows Vista, occasionally my internet will randomly dropout. Limited Internet Access". When it does I can do a few things to get it working again:
- Disable, then enable my wireless card and reconnect. - Uninstall the card, then re-install and reconnect. - Disconnect from the internet myself and reconnect.
Either way it gets super frustrating. There is 1 other computer plugged directly into the router that does not experience any issues. In addition, I have 1 laptop (windows 7) that works great and 1 laptop (Windows XP) which works great.
I'm facing some problems with my C drive. Errors were said to be found in C drive during Error checking. However, I could not auto fix system errors when C drive is in use. Thus I've assigned a chkdsk upon start up. Here's the catch, the Chkdsk appeared for a sec and was automatically terminated abnormally by the system itself. I've tried to system restore, but was prompted that there's error, so I can't restore the system. I didn't have much knowledge regarding the backing up of the system, thus i did not create any backup entries. I'm using Lenovo Win7 Laptop, 64 bit.
Last night I was on the internet at home absolutely fine and my laptop automatically downloaded an update, since then I have been unable to connect to my wi-fi. I deleted the updates and was still unable to connect, so I tried to used a system recovery restore point and every one I use starts but fails to complete.So, I did a factory reset after around 8 hours of trying to sort it out today and I STILL have the same problem. I can plug in the cable to connect and my housemate is having absolutely no issues connecting and neither is my phone so now I am at a total loss what I should do to resolve this. Prior to the factory reset I was able to connect to the wi-fi but it was stating no network access/limited access and now it simply won't connect to my internet at all. It finds my full strength signal but will not connect.My drivers for the Broadcom 4313 802.11b/g/n card are the most up to date and the laptop (HP G62) says it is working fine.
I have been having problems with my new computer running Win7 Ultimate and have had to do an upgrade install. Now IE8 and Incredimail are unable to connect to the internet although Norton, Windows, System Mechanic, etc.,can all download updates
I CAN connect to internet just fine using my wifi BUT I CAN NO LONGER connect to 198.192.1.1!!! Any idea how to solve this problem? I'm using a Dell Insprion 1545 and Win7 32-bit. I never had this issue before, jut popped up when I tried using ICS on a different laptop, an IBM thinkpad T42 also using Win7 and connected to the same network via wifi. Again I can connect to the internet just fine on all my laptops, but 192.168.1.1 (for my netgear router) returns "unable to connect" page!!! have verified (via ipconfig) that my gateway ip is 192.168.1.1. I have valid IPs on all the laptops, but cannot connect to router setup page.
When my computer says Internet Access, I am having trouble browsing.Most pages do not load.Right now, It says no internet access for over 15 minutes and I am able to brose so much better and still going on downloading around 400 kb/s.(I am on a wired connection from a cable internet with NetGear CGD24G Cable Modem (I don't think it is a wireless router). There is wireless connection on the modem, but I am on a wired connection, and I am posting this while it still says no internet access).
I have a Dell Inspiron N5110, Intel core 3 processor, and Windows 7 ultimate 64 bit os. I have recently reinstalled windows 7 from the windows 8 os. I can't access my wireless internet, I can only get to the internet via hard wire. I have searched Dell and Intel for the network controller driver and the sm bus controller driver, but to no avail.
Recently, a "Limited Access" signal has been coming up beside my internet access signal, even though it's got full access and the wireless connection is fine .
laptop so I reformatted his laptop and when I try to to connect to the internet via WiFi I could connect but I would have limited access. I can connect to the internet with my old laptop, iphone and xbox. But I cant connect to my newly reformatted laptop
internet connection sharing: No internet access!?I am trying to setup internet connection sharing between my laptop (Connected to WiFi) and my pc which has no wireless connection. I've spent a day or two troubleshooting problems such as 'LAN' doesn't have valid configuration and such, i found a solution and I've got the two connections to be able to see each other, but i can't get an internet connection to go through.I have my ipconfig /all for both computers available: (Both have had excess trimmed off to save on character limit)[CODE]
Am using dell inspiron laptop with windows 7 home premium 64 bit , i have a free wifi in our collage when i give connect it was getting connected but there is no internet access i had tried with trouble shoot it was giving problem regarding DNS
A few days ago the public wireless internet i used worked fine and i had no problems with my computer. Now when i try to connect to it, it isn't allowing me access. It works just fine on my sisters laptop that is the same model and brand as mine.
I am trying to setup internet connection sharing between my laptop (Connected to WiFi) and my pc which has no wireless connection. I've spent a day or two troubleshooting problems such as 'LAN' doesn't have valid configuration and such, i found a solution and I've got the two connections to be able to see each other, but i can't get an internet connection to go through.I have my ipconfig /all for both computers available: (Both have had excess trimmed off to save on character limit) [code]
i'm trying to connect 2 laptops via ad hoc so that i could share the internet the server computer is a xp sp 2, the client is the default 7 starter of my laptop.the ad hoc seems to be fine, and i can share files between them, but win 7 can not access the internet and says "no internet access"
For some reason my hp notebook will not connect to the internet, its just stopped working recently and I cant seem to find the problem.It says I have signal to my router.When I open the browser it says I am not connected, if I try and run the connection wizard/ diagnosis it says an error occured while troubleshooting an unexpected error has occurred, the troubleshooting wizard can't continue.
This is a problem that has probably been solved but I have spent some time looking for the solution without success.
Windows 7 (6.1.7100 build 7100) indicates that I have no Internet connection in spite of the fact that I can browse without any problems (see attached image).
Mostly this is not a problem except that I want to connect to an external server to upload files. Normally I use map network drive for this. When I attempt this, I fail because it doesn't see the Internet connection.
I have tried the following solutions which haven't worked Disabling link scanning in AVG Disabling all other network connections
How do you connect to another PC using remote access, I can connect to another computer at my house but I want to connect to my uncle's from Arizona to California. What IP adress do you write down because everyone has the same 192.168.1.1 so if i put that it will connect to another one in my house. Is there some other IP adress that I can use. How can i connect to his PC.
