My problem:-Computer restarted itself while I was working (I believe I had awindows update installed, and it restarted by itself)-Rebooting never gets past the Gateway logo.-What I see: Blinking cursor, even AFTER pressing F8.What I did:I tried F8 (to get into system restore) but all I can do it so into F2 and F12. When I press and hold down F8, the computer beeps 3 times. After that, any key I press will beep.My computer:-I have a Gateway netbook laptop, running on 64-bit Windows 7-I do not have a CD-ROM drive in my netbookI do not know what to do.
I started IT for a company a couple weeks ago. I get this tower with no idea what OS is installed.Is there a file that I can load through Trinity Rescue Kit that will tell me what version of Windows is installed on the system?
So I installed Windows 7 on my HD. The installation process went well. I chose my Username, password, etc, and then Windows prepares the Desktop for the first use, and then the PC automatically reboots.
The problem is that when the pc reboots after the final stage of the installation, Windows won't boot up and I get stuck with a blinking cursor. The only way I can boot up is when I turn on the PC and keep pressing F5 and then it takes me to a GRUB 0.4.4 Red Window like this one
When I chose the "alternative method", Windows boots with no problem. Is there a way to choose the alterative method as the default?
i have a lenovo thinkpad edge 14" running 64-bit windows 7 home premium. the laptop didn't come with any CD's, everything was pre-loaded on. all i get when i boot it is a black screen with a blinking cursor , when it boots all it shows is the thinkpad splash screen then straight to the blinking cursor. i have access to a lenovo x220 running the same (i.e. 64-bit Windows 7 home premium) however no CD drive, the edge 14" does have a cd drive. looked at multiple articles on seven forums but none of them help because i dont have a cd burner
My PC had been running sweet for about 2 years heavy gaming and music production then my psu blew up which i replaced and everything was gravy again. about 2 weeks later i was playing battlefield and i got a bsod citing pfn list, the first ever bsod with this pc. from then i was getting bsods with various different reasons pfn list and others i cant remember which. after much faffing getting nowhere i decided to try a fresh install of windows 7 64 on a new partition. at this point i had an old xp partition on one hard drive as well as on old win7 64 partition and my current win7 64 partition on a separate drive. i created a new partition on the same drive as my win7 partitions whilst in windows and shutdown to start the new install. everything looked to be going fine but then the windows install stopped saying files were missing. after this point my pc no longer shows my old partitions and i only get a blinking cursor when i try to boot from any drive other than the dvd drive. ive tried pulling ram, yanking the graphics card, pulling the battery out.
I used to have win xp installed after which i decided to try out the win 7 so i installed it on another HDD. After thhe install everything worked fine so i decided i can format the drive on which xp was installed before. Althought win 7 did let me format it because it was a system drive ( the old xp drive) i used some other tools to get rid of it thinking i can just do a fixboot and restore win 7 boot files. Now that the old system partition is gone win 7 wont boot, all i get isa black screen and a blinking cursor. I tried to boot from the win 7 dvd and do startup repair but still get the same issue.
i really dont want to reformat win 7 and install it again?
for some reason I can't even get into windows 7, after I get pass the screen that says "asus" , my laptop brand, It goes into a black screen with a blinking cursor in the left hand corner like this:
I'm unable to do anything at that point, it just blinks. I can't even boot into safe mode now, the only think I'm able to get into is the Bios Setup Utility menus and Asus' express gate, which is just a media/internet/gaming/skype thing that doesn't allow .exe files to run...
This came factory installed so I don't have a windows 7 disc to help run fixes or anything.
two day ago i turned on my pc as usual. But it did not boot, instead i got a black screen with blinking cursor, so is there any way to make my pc recover from this issue.
I've tried the f8 , it has No effect I even re installed the os but it does not work.. It does all installation work asks for my name and pc name . Then it does the video and perfomance testing . Then it restarts and i again get the blank screen with blinking cursor.
I have a new Dell Optiplex 790 that I'm trying to install Windows 7 Enterprise onto. It installs no problem, but afterwards, after post, it will just display a blinking cursor. If I hit F12 during post to go to the One-Time Boot Menu, there is an option for "Windows Boot Manager" and if I choose this, it boots fine. I have tried multiple disks, multiple hard drives, updating the BIOS version, both ATA and AHCI configurations in the BIOS, and even multiple machines, all brand new 790s. This problem seems to be hit or miss, as Windows 7 will install fine on some and will cause this problem on others. Also, I have tried installing EasyBCD and there are some issues with that. It will not display an option for Windows 7, so the boot menu is completely blank. It won't let me add any entries there either.
Can't get into windows, black screen with blinking cursor for some reason I can't even get into windows 7, after I get pass the screen that says "asus", my laptop brand, It goes into a black screen with a blinking cursor in the left hand corner like this: Click this bar to view the full image. I'm unable to do anything at that point, it just blinks. I can't even boot into safe mode now, the only think I'm able to get into is the Bios Setup Utility menus and Asus' express gate, which is just a media/internet/gaming/skype thing that doesn't allow .exe files to run. This came factory installed so I don't have a windows 7 disc to run fixes.
Windows 7 x64 Ultimate 2 250gb Seagate Barracudas 7200 > Raid 0 AMD Athlon II X3 450 Rana 3.2GHz Socket AM3 95W Asus M4A78LT-M Mobo 2 Crucial 2GB 240-Pin SDRAM DDR3 1600 1 2GB G. Skill 240 pin DDR3 Memory
Ok computer has been doing scandsks for the last week all of a sudden when starting up and now it splashes the boot screen and hangs on the black screen with a blinking cursor at the top left.
heres what i have done so far:
1-booted from windows cd and did STARTUP REPAIR, it found my windows installation and finished without no problems - PROBLEM STILL EXISTS
2-command propmpt and fixboot command unsuccessful since it stays on x: dir and i cant find the c: dir for the right commands
3-SYSTEM RESTORE found no earlier restore points which i found odd but it is what it is.. lol..
4- went ahead and tried installation of windows to see if it recognized my drive on array and it did with the correct size and data.
I tried installing the regrun reanimator to see if it maybe was a root kit problem but the boot up disk didnt recognize my c drive either.
I have purchased an OEM pc yesterday and I installed windows 7 x64 on it. Everything went great with installation. No errors or anything. But when I restarted my computer, after the motherboard splash screen a black screen with a blinking cursor top left appears and windows doesn't boot. But sometimes, especially when I wait a few minutes to turn it on it boots normally till I shut it down. It is so random.
My specs are: Motherboard: gigabyte 970a d-3 Memory: CORSAIR 4GB VENGEANCE DDR3 1600MHZ CL9(*2) CPU: AMD phenom ii x6 1100t black edition 3 .3ghz GPU: Sapphire hd 6870 1GHZ PSU:700watt OS: Windows 7 Ultimate x64
About a month and a half a go my laptop was infected with 2 trojan viruses and ever since I haven't been able to start it up as it stays on a black screen with a blinking cursor after the toshiba splash screen. I am able to use my computer by booting with Hiren's boot cd and have since cleaned up my computer and gotten rid of any viruses..but have to continue booting via disc and it is getting sickening to do so.
I built my own computer last year. The computer boots up just fine but before it bios screen comes up there is a blinking cursor that runs for almost 20 seconds and then bios kicks in and everything goes on normally form there.
I just rebuilt my computer, but reused my old WD HDD, OS and all. It used to be hooked up to an AMD rig, but my new CPU is an i5-2500k and mobo is an MSI P67A-GD53 (B3). So when I hooked everything up and booted for the first time, the computer showed an error saying that the memory or cpu had been changed and that I needed to run the setup, which I did. That led me to the blinking cursor on a blank screen.It stayed that way for several hours before I decided to reboot. That time "A3" "99" "B4" flash on the screen, then it goes straight to the cursor. So I decided to give a new hard drive a try. I went out and got an SSD, hooked it up, same problemMy best guess right now is that the mobo was DOA. I'm still kinda new at this PC building thing
I have a sony vaio vpceb11fm laptop. the moment i turn it on i get the vaio sign and then a black screen with a flashing cursor on the top left hand corner i tried f10 to recover the system but come across the same problem.
I upgraded to Win-7 64 bit and now my mouse cursor blinks with the busy icon about every 6 seconds. I also see the processor is running at a constant 4% to 6%.
When I had Vista the solution was to disable the HD Audio device and it solved the problem. Now this isn't working at all.
I also installed a new video card: ATI Radeon HD 5770.
I recently dualbooted Linux Mint and Windows 7 on my laptop. Yesterday I removed the Linux partition without thinking, and forgetting about the GRUB bootloader. I'm at a stump now. When I try and turn on my computer, the Toshiba logo appears, then the screen goes blank with a blinking cursor. I searched the internet all of today and most of yesterday, all that did was tell me to do the bootsect /nt670 /fixmbr and all it's variations[CODE]
I just made my first PC and after entering UEFI and choosing the CD drive as the boot disk I am led to a black screen with a blinking icon. Now I tried to boot from a USB, but this also led me to the black screen.
Specs: Intel i5 3570k ASUS P8Z77-V WD 500GB OCZ Vertex 3 120GB EVGA GTX 670 FTW Edition Rosewell 750w Bronze Certified Lite-on CD drive Zalman 2 Ball CPU Cooler
My computer would not get past the start up screen � it just froze at the Windows 7 logo. Prior to this, I had absolutely no problems. I shut it down one night and came to start it the next morning and it wouldn't load. I format the drive and tried to reinstall Windows 7. It seemed to load everything fine and got to the "Completing Install" part, then just flicked to a completely black screen with a blinking line in the top left-hand corner.I did read on one forum that perhaps it was a RAM issue, so I removed one stick and the process actually completed! I thought I had nailed it. After setting my computer back up and with everything working just fine, I put the RAM back in. On restart, it locked at the logo again, so I figured it was definitely bad RAM, HOWEVER!! Even with the RAM now removed, I cannot get Windows 7 to reinstall. I am still getting this awful black screen with a blinking cursor.
I'm trying to boot up this HP laptop that shows a black screen with a blinking cursor after the HP logo. I've tried using a windows 7 recovery disc to repair start up.I've restored the computer to an earlier date that it was working correctly. I've ran every test in the computer's built in diagnostics, and every single one has passed, and no errors in any part of the system were reported. Also, the computer will not start up in safe mode or anything like that.
I use an Asus Bamboo U43 series running Genuine Windows 7 Home Premium x64. I was using it as usual and what I thought was a normal update occurred. When computer went into a typical update restart, upon reboot a black screen with a blinking cursor appeared (normal for start-up I know) but then the cursor dropped down a few lines as a cursor would do if you hit enter a few times, and that is it. The computer will not continue to the windows start-up screen. Pressing F8 or F9 during reboot does not respond. I can us ESC or F2 options and that is it.
Ok so recently I got a black screen with a blinking cursor on the top left. The computer starts up normally with the toshiba logo but then it goes to this black screen with a blinking cursor. I tried almost everything. I tried doing system startup repair, /fixboot /fixmbr, The "0" key, F8 doesnt work and so forth.I cant even reinstall windows 7 onto the computer because after it restarts to finish the installation it just goes back to the black screen with the blinking cursor on the top left. The computer is a Toshiba Satellite A205 - S5825 windows 7 32 bit.
Tech-savvy superior beings, I humbly come before you because my rig is having a fit. Whenever I start her up, I get as far as the splashscreen that reminds me which mobo I have, followed by a cursor blinking on a black field for eternity.
[code]...
Lovingly jumbled together based on my perusal of this very site. It has brought me much happiness until now. A thousand pardons if this problem has been resolved in another thread. I have been forced to look for solutions on a smart phone, which is trying my patience
I'm having regarding my Dell with Windows 7 x64. Initially I got the message "Loading PBR for descriptor 2... Done". That's all it said, and did not continue to boot. I researched the error message and found many users with similar problems that solved it by booting the Windows 7 dvd and running bootrec.exe from the command prompt, so I attempted this. I tried bootrec with the /fixmbr, /fixboot, and /rebuildbcd options. After trying to fix my problem with bootrec, the "loading pbr" message no longer appears, all I get is a blank screen with a blinking cursor after the BIOS. I'm not sure what the problem or solution is at this point. I'm not sure if I've made things better or worse. I tried running chkdsk /r but it won't run, complaining that the disk is write protected. Edit: I just realized that System Recovery Options is showing "Operating system: Unknown on (Unknown) Local Disk"
I have a gateway computer that is infected with a virus. I was able to load the computer in safe mode a couple of times before it no longer loaded login screen for my computer. Now when I cut the computer on there is only a black screen with a white blinking cursor. I have the avira rescue cd and have changed the seetings to boot straight from the cd rom but even after running the rescue disc the computer will not allow me to use the (f) function keys. When I press down on any of the (f) function keys there is a beeping sound but no action. I tried to use a windows reboot cd made from another computer but it does not load on the start up like the avira resue disk does.
Dell Inspiron laptop, working fine, shut itself down last night mid work and now will kind of start up but only go so far. am left with Black screen with a blinking cursor in the top left hand corner. Managed to get f8 to work after a while. It runs the pre-boot system assessment build 4116 - everything gets a "pass" except The hard drive which gets a "running". All memory tests "pass" also. After this it will go no further, no more screens. Running windows 7....F2 and F12 will not work either so cannot start in safe!
Sometimes when I turn on my computer, the screen will turn on as usual, and there is like a cursor that blinks in the top left corner of the screen, again, as usual. However, it will sometimes stop, and stay on this screen for upwards of a minute or more. The laptop sounds like it's still working, as the fan is going pretty fast and everything sounds like it's spinning, however it doesn't show anything on the screen. After around the minute duration, the screen will go black and the normal boot up process is proceeded with. From what I've read of other people, they can't even get past this screen, which is why I think my problem is slightly different, or the same, just not as severe. Does my problem also sound like it's the MBR, as indicated by other people's questions on the Internet?
If so, is there any easy way to repair it without having to use a windows 7 disc, as I have a laptop and didn't get a disc with it...
Today I tried to boot up my laptop but I am stuck at a blinking cursor on a black screen. To make matters work my keyboard doesn't work either so I can't use F2 or F12 before it boots to the black screen.
I have a Dell Inspiron, not always but sometimes on start up it restarts to a black screen with a white cursor. Safe mode does work.I don't know why it sometimes does this or what makes it stop. I have tried just letting it try to load up for as long as an hour with no change, sometimes restarting has fixed it but sometimes (like now, it has done nothing no matter how many times I've tried).
