Bizarre - Unable To Connect To Internet?
Jan 13, 2013
friend has just taken delivery of a Virgin Media all-in-one hub and can't access the internet via the ethernet connection but can via wireless.I've got the pc here. Here's the state of play:Her pc can access the internet via MY cable modem.My pc can access the internet via HER all-in-one hub.I cannot get her pc to access the internet via HER all-in-one hub (which mirrors her experience).So, there's nothing wrong with her pc because she can access the internet just fine via my connection; her all-in-one hub seems fine as I can access the internet via it.....it's just her pc and her hub that don't seem to like each other!'ve tried ipconfig/release etc to no avail.If I type 192.168.0.1 into a browser window, I can get into the all-in-one hub's setup but there's nothing unusual in there.
View 3 Replies
ADVERTISEMENT
Nov 17, 2011
i recieved my new lenovo z570 ideapad yesterday...i'll just put some of the spec down incase you want to know.
proccessor: intel i5 (second gen)
graphics: nvidia geforce
os: windows 7 64bit
yadayadayada...
anyway, after charging it up and turning it on, i started to install programmes and other bits and bobs. e.g ituens, flash player. just the usual essentials. i used the laptop to watch videos on Internet, genenral browing such as facebook, so in short, the internet was working fine. just before i went to bed that night i installed avg security (free version) and ran a full scan. when the scan finished, i put the laptop into hibernate, and went to sleep! happy in the knowledge my new gizmo was running smoothly!
just before i woke up i heard the laptop turn off as it had run out of charge. so i plugged it in and charged it up, then turned it on. this is where the problem starts...i connected via wifi however the logo at the bottom right of the screen showed the signal strength meter on empty, with a yellow star covering it. i clicked the icon, and it said, 'not connected, connections are available' and below shows im connected with 5/5 signal strength, but on 'limited access'.
1) there might be a problem with the driver for the local area connection adapter
2)there might be a problem with the driver for the wireless network connection adapter
there are 28 updates, but im unable to update them as i have no internet connection. i also cant connect via the ethernet cable.i cant roll back the drivers as there are no previously installed ones, and i cant update them as i am already up to date.my other laptop (acer aspire 5630 running on vista) works perfectly fine using wifi and the ethernet cable, so i honestly dont know whats wrong. after reading things on my acer about ways to fix the problem i came to the decision to restore the laptop to the time of my first installation which was adobe flash player (which i installed the day before.) i was unable to do a full factory reset as the only options available are to either restore to a backup, or re-install windows (which requires a disc, which i dont have). i also didnt configure a backup as i had only had the laptop a day!
View 9 Replies
View Related
Jul 7, 2012
I have been having problems with my new computer running Win7 Ultimate and have had to do an upgrade install. Now IE8 and Incredimail are unable to connect to the internet although Norton, Windows, System Mechanic, etc.,can all download updates
View 10 Replies
View Related
Jan 17, 2012
When I first reinstalled the windows 7 it worked fine and I was connected to the Internet using my belkin USB adapter. But after moving my computer to a new room the Internet connection stopped working. Ive ran trouble shooters over and over and it says its a router or adapter issue, but all the other computers in the house are connected to the Internet just fine. I've reconfigured everything, restored and I was told to post here!I also want to add that it connects to the Internet but after about a minute it gets the triangle with the ! And acts connected but I cannot open any web pages or open any online games.When I trouble shoot it still tells me that Its in the adapter, router, modem, gateway or related issue.
View 2 Replies
View Related
Apr 4, 2011
i have installed windows 7 on hp pavillion dv65000 laptop. there is a yellow triangle on the network driver(NVIDIA nForce networking Controller). it not able to connect to the internet even though the wireless is a able to connect to the internet. i try to update it through the internet and it tells me i have the latest drivers and yet it is not able to connect to internet through wire(RJ45 connection
View 10 Replies
View Related
Oct 22, 2011
I am using a lenovo thinkpad x100e running wins 7 32bit.The problem is that im unable to connect to the internet explorer....I have been able to connect to my router using cable and on wireless.Have been able to download windows updates and java updates without any issues.
View 3 Replies
View Related
May 24, 2011
I have a problem. i cant connect to internet. I cant connect everywhere what is with internet (skype , steam , windows live messenger and more) . In the right down corner shows Network Internet Access. What should i do?
View 6 Replies
View Related
Mar 12, 2012
I recently got Windows 7 on one of my desktops. I plugged in my Logitech 5.1 speaker system and I am getting absolutely nothing out of them. I went through the obvious checks (not muted). I was then searching my computer for evidence of the speakers even being recognized, and as far as I can tell they are not. I have Realtek High Definition Audio, and I've tried disabling/enabling this several times accompanied with a couple restarts of the computer.I understand I may need to update my drivers but at this point I'm unable to connect to the internet (Will have access in a couple days). I have searched this problem on my other computers and I'm getting mixed answers. I've heard my soundcard may not be compatible, the drivers are out dated, or I may want to use something other than Realtek.
View 7 Replies
View Related
Oct 21, 2012
i run network diagnostics. Below message is displayed, Wireless network connection doesnot have a valid IP configuration
View 2 Replies
View Related
Jun 24, 2012
I am unable to connect to the internet in wireless mode. It shows the available networks, but does not connect when I type in my router password. I have tried everything I know of. Uninstalled/Reinstalled the driver - I have an Intel 5100 AGN wireless driver installed. I disabled and enabled it. Didn't work. Running command prompt and typing in ipconfig /all doesn't detect my adapter device - says "Media Disconnected".I also did these by running command prompt as an administrator: Reset WINSOCK entries to installation defaults: netsh winsock reset catalogReset IPv4 TCP/IP stack to installation defaults. netsh int ipv4 reset reset.logReset IPv6 TCP/IP stack to installation defaults. netsh int ipv6 reset reset.logand restarted my computer. I have a Dell Studio 1555 with Win 7 (32-bit) Professional.What am I supposed to do now? Please help!PS: I know this is a problem with my Windows as the wireless works seamlessly in my Ubuntu.
View 2 Replies
View Related
Dec 1, 2011
I am trying to get on websites via chrome, IE.. Etc however it just won't connect. I have checked all my settings like the proxy settings etc and it sill don't work. Program's like Steam and Dropbox are still able to connect to the Internet though. I have also tried a reboot of the router.
View 1 Replies
View Related
Dec 19, 2011
I've been having connection problems for the last year, it's really annoying and so hard to understand whats happening. The internet connection is my dads, he lives in the garage beside me. He's with talk-talk fibre optic. The small modem type thing that connects is in the garage along with the main router that connects to the small thing, not sure what this is but it obviously connects to the fibre optic.His PC is connected to the router by wire, there is then a wire that runs from that router up through the garage and into the house through the wall in one of the bedrooms, this is were I have a router or two, (i've tried two routers with mixed results.) I'm connected via wireless through the second router in a room upstairs and get full signal when connected. I have a belkin 54g and a netgear dg834n. Now this morning after leaving my computer on all night, i woke up and it wasn't connected. Although this happens everyday when i turn my laptop on, i have to connect via wireless to the main router in the garage, then reconnect to the router up stairs to get the connection to come on. This time round it wont work at all. The netgear gives me - "Windows Networking TroubleShoot Error: The connection between your access point, router, or cable modem and the internet is broken."
View 2 Replies
View Related
Feb 5, 2012
I just restored Windows 7 Home Premium and for some reason I can't connect to the internet anymore. When I run my Diagnostic Tool it says that the computer is properly set up but that the following ressource "(w w w. microsoft. com)" seems to be unrespnsive. Drivers are up to date and network card is 802.11n Wireless LAN card from Ralink technology Corp.
View 9 Replies
View Related
Jul 25, 2011
I cannot connect to the internet windows 7
View 2 Replies
View Related
Jan 19, 2012
I have a hp pavilion windows 7 home premium that will not connect to the internet. When i ping google.com i get "ping request could not find host google.com. please check name and try again.". however, when i ping 74.125.224.176 i get "PING: transmit failed. General failure. 100% loss". I have also tried to connect while in safe-mode but not luck and i also reset all setting in IE. I have two other computers connecting to my 2wire modem and they are both working fine. The last attempt was installing a new network pci card. I have also swapped out the cable but i still get "Identifying... No internet access."
View 7 Replies
View Related
Jan 19, 2012
I have a hp pavilion windows 7 home premium that will not connect to the internet. When i ping google.com i get "ping request could not find host google.com. please check name and try again.". however, when i ping 74.125.224.176 i get "PING: transmit failed. General failure. 100% loss". I have also tried to connect while in safe-mode but not luck and i also reset all setting in IE. I have two other computers connecting to my 2wire modem and they are both working fine. The last attempt was installing a new network pci card. I have also swapped out the cable but i still get "Identifying... No internet access."
View 5 Replies
View Related
Jun 6, 2011
i have bsnl broadband connection.whenever i tried to connect it through my win 7 it gives me error 651 with pppoe.. I am on a wired connection through a modem,..modem is workng well with win xp..but not with win 7.
View 2 Replies
View Related
May 20, 2012
I am not able to connect to the Internet from my laptop on Sundays wirelessly.I can connect to Internet from my other devices without any issues...
View 3 Replies
View Related
Sep 22, 2012
I've recently changed hard drives as the last one failed. I've got windows home premium running fine but it won't connect to the internet.It says 'plug an ethernet cable into this computer', i press the button to 'keep trying to fix problem' and it comes up with 'a network cable is not properly plugged in or may be broken.All i want is to connect to the wireless internet at home but it won't pick up any??
View 1 Replies
View Related
Aug 12, 2011
i am not able to connect internet through my phone using samsung
View 1 Replies
View Related
Jan 20, 2012
I have a hp pavilion windows 7 home premium that will not connect to the internet. When i ping google.com i get "ping request could not find host google.com. please check name and try again.". however, when i ping 74.125.224.176 i get "PING: transmit failed. General failure. 100% loss". I have also tried to connect while in safe-mode but not luck and i also reset all setting in IE. I have two other computers connecting to my 2wire modem and they are both working fine. The last attempt was installing a new network pci card. I have also swapped out the cable but i still get "Identifying... No internet access."
View 1 Replies
View Related
Jul 10, 2012
tried to install ilivid to downloads some music and now cannot connect to the internet.aving done an avg scan it found faxcool.exe and moved it to the virus vault. However i can still not connect to the internet or any network. I bought my pc a few months ago refurbished off a private seller with Windows 7 installed on it.
View 3 Replies
View Related
Aug 15, 2012
I am unable to connect to the internet, ethernet & network drivers are not installed Unablet to connect to internet drivers not installed
View 1 Replies
View Related
Oct 15, 2012
My laptop is 1 year old and has worked great until a month ago. I was unable to connect to the internet and thru troubleshooting got a "missing network adapter". I have since upgraded the driver. I also purchased Registry cleaner program that supposedly found over 400 registry errors.I found by accident that I was able to connect normally if I turned the PC off by holding the power button. Then restarting, I got a message to start windows normally. When I did, and then it connected to the internet normally.Now, each night if I leave the power connected to the laptop and shut down windows from the Start command it works fine. I do not want to have to leave the power connected. Toshiba tech support is unable to help other that suggesting I return the PC to the "out of the box' status which is totally unacceptable to me.
View 2 Replies
View Related
Aug 9, 2012
i cleaned my machine of anti virus and it cannot just hook up to the internet again
View 1 Replies
View Related
Jan 28, 2011
My windows 7 machine is unable to connect to my internet through the wireless bridge I've set up on my WRT54G using DD-WRT. It seems to be connected to the network as it sees the other computers that are on it but there is no internet access. Every once in awhile it gains access and then abruptly loses it in a matter of minutes. The router supplies internet to anything else I plug into it, be it my Xbox or laptop running XP.
View 2 Replies
View Related
Dec 4, 2012
My desktop (windows 7 ultimate 64bit) has been able to connect fine to the internet until I got home from work this morning. My laptop is connecting to the same modem fine through wireless (along with my wii). The modem I am using is Motorola SB 901. When I rightclick my connection on my desktop and hit troubleshoot problems, I get 'local area connection 2 doesn't have a valid ip configuration'. Same thing happens when I switch the ethernet cord to local area connection 1. When I go to control panel, network and internet, network and sharing, the connection map at the top stops between my pc and the network (which is now labeled as 'unidentified network'). Here is a list of what I have done so far to try and resolve the issue:
1. Replaced the ethernet cord with one I know is working
2. Full scanned my pc for viruses
3. Disabled all firewalls and virus protection programs
4. Restored my pc to a previous save state
5. Reset winsock with cmd via these prompts: netsh winsock reset catalog and netsh int ip reset reset.log hit
6. This attempt is unfinished as I am getting stuck. I am attempting to setup a static ip to attempt to resolve the issue, but when I open cmd and type ipconfig/all, the default gateway under my local area connection is completely blank.Here is what comes up with ipconfig/all:
C:UsersPaul>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Paul-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
[code]....
View 9 Replies
View Related
Jan 13, 2013
My mom's laptop is detecting that our wireless internet connection is active, but it won't actually connect to the internet. When we troubleshoot the issue, it says that our diagnostic policy service isn't running. Since we can't connect to the internet on the laptop, we can't run any updates or perform any virus scans. We've tried manually adding a network service through cmd.exe, and uninstalling the network adapters and restarting the computer. We've also tried to run a system file check, but it doesn't seem to activate. The sfc box just disappears when we try to initiate a scan. I imagine we might have to back up her important files and just reinstall the operating system, but her laptop came with a preinstalled OS, and no discs.
View 1 Replies
View Related
Feb 7, 2012
I just formatted my entire laptop (Samsung RV511) due to a bug that was in the system my antivirus could not detect or the help of system restore would not get rid of either. My previous 2 laptops came with recovery discs but the samsung had only come with the windows 7. I had installed Windows 7 and after doing so, checked everything out. I realized that Samsung has many specific programs and drivers that come with their computers and in the process of formatting, I had deleted everything. My computer is unable to connect to the Internet and I can't even change the brightness of the screen anymore.
View 14 Replies
View Related
Feb 7, 2012
I recently, well I say recently but it was late 2011 I decided on building a new RIG, the final hardware change was my external HDD which I bought last week and a couple of days ago I connected and copied everything from my old HDD to the new one. It's insanely fast, USB3.0 is really fast. Although, coupled with Buffalo utilities it's even faster.When I restarted my system after configuring everything in the Buffalo utilities I restarted and it was fine everything was working as it should be until I used my PC today and it booted really slow. In fact it was so slow I had to reboot it again and it was even slower than before. I disconnected the HDD and rebooted and it was there in a flash...? Okay, this is odd, I have come across this before with an external HDD but this is the first time that I've encountered a problem with USB3.0.Scratching my head and coatie I pondered on what is potentially causing the problem, I then had a EUREKA moment. The Buffalo utilities use RAMDISK which is basically a virtual HDD which uses RAM. I delayed the boot of Buffalo Utilities and rebooted and it was fine. Whatever is causing the slow boot it's being caused by Buffalo. If I delay the loading of the software it's fine.
View 1 Replies
View Related
Mar 5, 2011
Can anyone advise how I would go about fixing this. I am trying to connect to a network (I have a dell running on windows 7) and it keeps telling me that windows is unable to connect to the network-this is before I can even enter the security key. I know it is not a problem with the wireless because other people are able to connect to it fine.
View 2 Replies
View Related
