Bios Upgrades
Mar 4, 2010when is the optimal time to flash a new bios update. do you do it then reinstall windows? or does windows even need to be installed at all to upgrade a bios?
View 3 Replieswhen is the optimal time to flash a new bios update. do you do it then reinstall windows? or does windows even need to be installed at all to upgrade a bios?
View 3 RepliesI just got my Windows 7 pro 64bit today and before i installed it i searched on the net if there any problem with the p5QL PRO MotherBoard,(Bios Version) anyway
right now my bios version/date 0902, 28/11/2008.
i never updates a bios before i don't want to blow up my motherboard either lol
i looked on support.asus and i found updates, version 1001 or higher 1004
but i don't want to upgrades it if i don't need too , anyones know if i really need to upgrades it to support win 7
cause i saw many thread here talking about win 7 64bit that don't work well with 9800GT
i dunno if the driver are the cause or the motherboard itself,
Have a bunch of machines waiting for the pre-order upgrade disks coming Oct 22. Several posts have said that the RTM is the same installer that will be shipped as upgrade. Is it possible to do the upgrades from XP and Vista now without waiting for the activation, then input it when it arrives shortly?
I started to try this last night and wasn't prompted for any key after starting RTM disk from desktop, selecting custom and selecting partition to install. Is this because the Upgrade disks have special code required for reading the XP/Vista activation when asking for Windows 7 upgrade key?
Also if upgrade can be installed to a different partition, then it seems there is a way to get a completely clean install running the installer from the XP/Vista desktop on HDD and installing to another HDD? I am trying to figure out how to get the cleanest possible install here without overwriting if poss.
I've done a lot of Windows 7 upgrades for people and I've noticed that I've never had to enter any kind of key when upgrading a properly activated copy of Vista, I think even during clean installs...
Does it activate automatically or is it just a matter of it waiting a week before yelling at you about it?
Since a re-install of Win 7, everytime I boot I get a UAC pop up asking if I want to allow Windows 7 Upgrade Advisor to make changes to my system. Even though I select NO it keeps coming up at each boot. Do I really need to have this program installed and/or how do I stop that from coming up each time?
View 3 Replies View RelatedEvery time I shutdown I get the same updates occurring. It seems to have got in a loop.
View 14 Replies View RelatedI am considering upgrading my laptop cpu, but I am not sure what CPU upgrades are compatible with my board, and when I try to look I draw a complete blank. [code]
View 4 Replies View RelatedEvery time I get an automatic update from Microsoft, it changes my home page and I usually go to restore my computor to a previous setting, and my home page comes back to where I had it.How can I stop or block these updates, or receive the updates with changing my home page to the default plain jane google home page?
View 6 Replies View Relatedpinpoint the EXACT how-to on upgrading a windows 7 basic system to ultimate (both x64bit) without losing any of the softwares and any other data on disk.Overview of issue:I've bought a new lenovo Z580 ideapad series laptop which came pre-installed with windows 7 home basic (x64) which I absolutely loathe as it has no aero themes and I'd like to change my windows to ultimate. My laptop came pre installed with some softwares and features for which I wasn't provided any driver/SW CD so the only way to keep these softwares intact is to upgrade (from what I understand, upgrading windows doesn't wipe off your softwares and program files?)What I've already tried:It seems windows basic can't be directly upgraded to ultimate using windows anytime upgrade. I tried and upgrade failed.I have windows 7 ultimate 64bit installation CD and product key, is there any way to upgrade my system using that and not do a clean windows install?If everything fails, is there any safe to use program or method to get setup files of my existing program files so I can reinstall them after clean windows install?
View 2 Replies View RelatedI've got an Acer Model As5742 Laptop with an i5 480M processor and 8 GB of good Ram. I'm running Win 7 Pro 64 Bit. It's only about 5 months old and this started about a month ago. I have no other problems. IE: Blue Screens or Lockups or anything, just the Bios clock changes to a random date and time after every restart. I replaced the Bios battery twice and it only effects the chore of having to reset the time in Windows every time I boot.
I'm going to send it to Acer to be repaired within a week or two, but maybe it's not a bad timing mechanism in the motherboard and one of you people have a correct solution to it. Which will save me the trouble of sending it in for a motherboard replacement.
I do have all the drivers and bios updates installed. Oh yes I've ran about 15 different virus Etc. Malware scans with several different products and they all come back clean. I ran System File Checker SFC /scannow from the command prompt several times that also comes back OK.
so i did a bios update, and it wont boot after the update.its a asus m4a79xtd evo (rev 1.01g)i dont have a backup of the bios
View 3 Replies View RelatedI have a five-month old HP Compaq Presario Laptop, which has been working fairly decently (I've had a few virus scares, and my Norton quarrentined something a twenty days ago). On HP's advice, I just updated the BIOS on my laptop. It's currently stuck at Verifying New Bios Image, and it's at 100% - It's been stuck that way for a half-hour plus.
View 14 Replies View RelatedMy Samsung series 3 laptop has been sending out popup messages telling me I need a bios update, I go to the Samsung software update site and this bios update has been failing, I have made several calls and chats to techs at Samsung who tell me to do what I have already done, they tell to ask for tier 2 tech, who can go in my computer and fix it , When I finally got a tier 2 tech, they told me the same thing, I told him what I had been told about him and what he could do, He said, is it working , I said yes, but settings on computer change on their own,like wifi turns itself on and that concerns me. Anyway, He said that it didn't need a bios update,even the Samsung website said this computer needed a bios update. I posted this on hardware,firmware concerns, and they told me to post here, I was going to go to a site ,that had a download that checked drivers,
View 3 Replies View RelatedWhat are the types of BIOS over years up to present BIOS types ? What make each BIOS unique and better then the previous ?
View 3 Replies View RelatedI have a Toshiba Satellite, A305 S6905 with a New Install of Windows 7 Home Premium 64 bit.Bios was updated to latest 2.20 version. I put two new, matched 2 GB ram modules in it. It does not show but 2 GB installed even in the Bios. I checked both modules by putting each one seperately in the primary ram slot and both were showing up as good. I even put the old 2 GB and 1 GB modules I had before under Vista and it still only shows 2 GB installed.It only shows 2 GB installed and 1.87 useable..It boots OK and seems to run fairly smoothly but I have not put it to the test under some memory hog programs yet.
View 9 Replies View Relatedi want to update my bios ( i have asrock motherboard N68-VS3 FX ) and i am a gamer who interested in performance i have bios ver 1.20 can i use the last bios update 1.70 ? or i have to download all the previous updates first what i mean is the update cumulative?
View 11 Replies View RelatedNew system build with Gigabyte GA-990FXA-UD3(v1.1), AMD FX8350 4.0Ghz/8coreVertex4SSD, Gigabyte GeForce GTX660 2GB video, 500wPSU, Win7 Home Premium/64.System ran/loaded/updated fine for about 6 hours then crashed during game play.BIOS/Windows unable to recognize SSD, unable to re-install Windows - get as far as "No drives were found. Click Load Driver to provide a mass storage driver for installation"that is followed by:"To install the device driver needed to access your hard drive, insert the installation media containing the driver files, and then click OK"I have burned CD\DVD's and USB flash drive files for a couple of days now looking for the "device driver", but I still hang up at the same screen.I have switched SATA/power cables, reseated memory (crucial Ballistic 2x(2x4)DDR3 PC3-1(16GB total)/video card, installed a WD Caviar Black 1T HDD (not recognized), (re)Flashed the BIOS to F9 from the Gigabyte sight (system had the most current version/flash was successful - no problems with that)but.
View 3 Replies View RelatedTried pressing DEL ESC f2 and basically every key on the keyboard during startup.. but no BIOS..
View 9 Replies View RelatedAs I mentioned how can I update my BIOS version I download the latest BIOS files from the manufacturing site but cant be able to update it.I have HP Compaq dc5850 Small Form Factor PC and My Current version of BIOS is 2.1 and update is 3.3
View 9 Replies View Relatedhow do you flash a bios for a motherboard using a usb?? I have an Asus P5KPL-CM and need the lastest bios cause it fixers a problem i have with my audio....
if someone could let me know how to go about this i wound be ever so greatful
NOTE: I have the right bios file.... I have no Floppy drive.
Just thought I would mention this as it is the second machine I have bolloxed now due to doing a bios upgrade.
A while ago I did a bios upgrade on a desktop machine and after doing it got a BSOD and windows would not boot. Had to format and do a fresh install to get over it.
This time round I did a bios upgrade on my laptop so that I could put a T9500 processor into it and got the same problem.
Bit of a pig this one though as I have 3 weeks of non backed up emails I will lose amongst other things.
It seems that if you do a bios upgrade windows 7 see's it as a different machine and just errors out without trying to load. There seems to be nothing you can do to recover from it.
Only option I have it to install another oppperating system on it and then see if I can downgrade bios. See if that will work.
Just be aware of this as not something that will show to often as not to common to have to upgrade bios. Hope this helps someone.
i never flashed bios before and have recently noticed there is an update on the Acer web site. The bios mine is running on at the minute is R01-B3 and the new one is R01-B4.
Is it worth updating to the new one?
Will Win 7 take to it?
What will be the benefits of the newly released bios over the one I have?
How do I go about doing it and are there any safety precautions I could take so I can roll back incase I F it up?
my laptop is vaio VGN-FZ31Z, is there any software i can use to update the bios?
View 5 Replies View RelatedI have two SATA hard drives. I was poking around in the BIOS yesterday and noticed that they were setup IDE instead of AHCI. I am not sure what either does and did not want to change anything without asking. When I first got my PC, it had XP installed, so I am thinking that is why IDE is set. Do I need to change it to AHCI? I am not having any problems. Would it be of any great advantage to change it? I understand that after the OS is installed, it is a problem to switch to AHCI.
View 4 Replies View Relatedhow to set bios to from CD. I have dell computer
View 3 Replies View RelatedPC does not boot to the bios.. motherboard is z68x-UD3H-B3F10
View 9 Replies View RelatedI was updating with sp1 and some other updates and when it rebooted the 2nd time it got stuck on the motherboard logo so when I tried to boot with my Window7 disk "nothing" I can not boot into my BIOS so I guess I should go down and get another motherboard? I just put in a new SSD drive and loaded my Windows from scratch a couple of days ago so I hope I haven't lost 10 hours of work?
View 3 Replies View Relatedmy computer when being booted up sits for about 30-45 seconds then goes to the welcome screen and turns on. My BIOS will not work. I need to change my primary graphics adapter and apparently need to do it in bios since its currently disabled. Does anyone know how to fix this? Ive tried pressing the keys to open it and it does nothing. When I force shut down my computer and you would receive the startup menu recommending safe mode etc my keyboard lights up and if I press enter it will bypass the 30 second count down before starting up my computer, but my monitor does not identify until the welcome screen and BIOS will not start.
View 2 Replies View RelatedThere are 2 options in the BIOS for my laptop fan:Silent and Normal.Right now, it is running under option 1 - "Silent".This may well be the reason why I don't hear any sound of the fan (unlike my other laptop that has a relatively noisy fan coming ON and OFF from time to time).Do I need to switch to "Normal" mode?Will there be any problem in the long run if I stay with the existing setting?The touchpad area and its vicinity are sometimes hot (not too much though) under the current setting. Has this anything to do with that BIOS option for the fan?
View 1 Replies View RelatedI have never done this before. My computer is two years old. Is this something that should be done every so often or does it need to be done before I install .
View 5 Replies View RelatedI've built new PC and can't runs in bios
View 9 Replies View Related