I just subscribed as I can not find the reason for many BSOD I am having in the past months.First I have to say that the cause is likely to be hardware as in the same rig I have Linux in another hard disk and also suffer the same type of crash.The BSOD happens mainly following this sequence of events:
- mcreen starts to show some artifacts, (small squares in groups and 4 small lines over the pointer in the screen)
- mouse freezes - display freezes (sounds work) for 5-8 seconds
- display resets
- then (sometimes) a message appears at bottom right of screen"display driver has failed and succesfully recovered..."
- few seconds later the process starts again. This can be happening from 2 to 10 times and finally the BSOD appears and the computer restart.
My guess is the graphic card but also could be memory (RAM) or who knows what. I just would like an expert opinion before buying anything new. [code]
I've completed a new custom build, but have had problems with BSOD from the beginning with any installation of Intel Graphics drivers or the installation of any graphics card.
When I first completed the build, the XFX-7950 Black was installed. I booted to BIOS without issue, but when I inserted the Windows 7 (64 bit) it would boot through the windows logo screen but immediately BSOD right after going to the first install screen.
I removed the graphics card, and was able to complete the full Windows install without issue. I updated Windows and the drivers on the system but as soon as I installed the Intel 3000 Graphics driver, it would BSOD on every restart. I recovered back prior to the Graphics driver install and installed all other drivers. I updated the BIOS to the latest version.
I have reattempted the XFX 7950 multiple times in different slots, but with the same results. I also attempted my Radeon HD 4550 from my old computer but it gave the same results. It always boots through the Windows logo screen, but BSOD within a few seconds of reaching the password screen.
I broke down and installed Driver Whiz, which did detect multiple outdated drivers that I had not caught, but none of these fix the issues.
I've attached the requested zip. I don't think all BSOD's are showing up, as I've had to use recovery points after installed drivers didn't work. The last .dmp on 19 JUL was a Intel Graphics driver install attempt that I pulled off in safe mode before recovering back to the pre-driver point.
System: ASUS P8Z68-V Pro/GEN 3 Intel 2600K XFX R7950 Black Edition OCZ 850W Crucial 128 GB SSD Seagate Barracuda 1 TB HD Corsair H100 Windows 7 64 bit (full)
So i was trying to use my TV as my monitor duo display and was having problems getting a picture on the tv after a while of changing the cables i noticed a bsod on my computer after looking what may of caused it and finding nothing i once again tried to set up the tv as a monitor i tried changing the resolution of the screen size and i got another bsod i wasn't able to take down the information in time and the PC restarted i noticed that when windows came up the color scheme of the monitor was messed up (colors and dark lines on the screen) iv shut it down in case something else happens and iv had a look inside but i cant figure out what is the problem any ideas
I have recently been having a few problems with my graphics card running at a high temperature so i read a few things online on how to clean it and then i did so. Now when i start up my computer normally "start windows normally" i get blue screen and the computer re-starts. When i run dxdiag it says i have no graphics card so im not really sure if its broken or if i have re installed it incorrectly.
I present a dilemma and acquire some assistance with anyone who is tech savvy in computers. Before I describe my problem, I just want to let you know that I have searched for this error and received no solution. But, I believe I have narrowed down what the problem is and I have a strong feeling it has something to do with or revolving around my graphics card(?). I have a report that I saved in my notepad here after the BSOD and it states that it will help describe my problem but I cannot locate it within my computer files(?) (Doesn't show up.)Any game I try to run will crash randomly, even with the settings on low, so I figured it's graphics related(?) I hope anyone can decipher this, it's very confusing and certainly frustrating. I have tried anti-virus scans, registry cleaners, even cleaning out my computer, everything seems to be in place and running fine, the whole nine yards. [code]
I am running a first gen Alienware M11x netbook: Processor: SU7300 Ram: 4 GB Graphics: integrated and GT 335m OS: Windows 7 home premium 64 bit
Last night, for the first time since I performed a driver update for the graphics card, I switched to integrated graphics to watch a video (mp4) while I had it unplugged. Upon running the video I got the BSOD with the information below:
Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.768.3 Locale ID: 4105
Additional information about the problem: BCCode: 3b BCP1: 00000000C0000005 BCP2: FFFFF8800410EDBC BCP3: FFFFF88008CD2CF0 BCP4: 0000000000000000 OS Version: 6_1_7601 Service Pack: 1_0 Product: 768_1
Files that describe the problem: C:WindowsMinidump123111-18673-01.dmp C:UsersSeanAppDataLocalTempWER-40295-0.sysdata.xml
I tried it again to make sure it would still happen (it did, not a great idea) and tried with the discrete card active which let it run. I also noticed the laptop having some minor issues in other places as well.
Around the new year, I installed new RAM. Ever since, I have been getting BSOD at various times. I ran memtest86 and it came back clean. Unfortunately I left the old RAM a few thousand miles away so I can't test it with that. I also started playing a couple of more graphics intensive games (Star Trek Online and BFBC2) around that same time. At first, the BSOD would only occur during gameplay. Lately, the games have been running better but I get random blue screens while web browsing about once a week. The ones during games usually said atimpag.sys or dxgmms.sys. The ones during browsing usually say ntfs.sys or fltmgr.sys. ntoskrnl.exe seems to occur with both. I've attached a file with the dmps and some screen shots of cpuz.
I was playing Skyrim last weekend, and the game froze on a black screen just as it was cutting to a kill animation. I had to restart the computer but when Windows loaded I had a BSOD. The computer booted fine up till this point.I've been looking up causes and fixes all week, and the dump files seem to suggest a 0x116 Video_TDR_error. I've attached all the requested information.I've already tried installing several different graphics drivers - the newest, the one supplied with the card, and one between. Windows and DirectX were fully up to date. I've also tried formatting the hard drive and installing Windows fresh, twice. I've had the computer back to the state it arrived in, when the drivers worked fine, and I've tried it with only the video drivers installed. Everything I try now is still resulting in the same BSOD.I can only get Windows to load in Safe Mode, or if I go into Device Manager and disable my graphics card. I am now fairly convinced the card itself is the problem, and I'm looking for confirmation before I go and get a new one fitted.The computer was new at the end of November. I had the same Windows install since then, but now I'm running a fresh install.
I installed a new graphics card (MSI N670 PE 2GD5/OC) and since then my computer has been very unstable and is crashing a lot. The card is factory overclocked and I think it is faulty. Do you know of a way to underclock the card, so I can test if it is the overclock?
PSU: Enermax EMG700AWT
*edit*So I used Afterburner to set my core clock to -104 and my power limit to 72% and this causes my card to boost to about 980MHz. With these settings the crashing has stopped. So the card cannot be used with the factory OC settings. So should I RMA?
Since the past 6 months i have been using my PC using my onboard graphics which is HD4200 (must be ATI), but prior to that i used to have my GTX 460 installed in this PC but it was on a 32 bit windows 7. On 6th Sept 2012 i re fitted my GTX 460 with the latest drivers of that day ( first i uninstalled the ATI drivers from device manager and then used driver sweeper in safe mode) but soon after installing the GTX in 5 minutes got a BSOD but all i could see was a percentage counter like 0-5-10-15... 100 and a reboot. All this happened in 5 seconds max i guess. I reformatted the PC and this time installed the previous WHQL drivers from nvidia namely 295.xx something but they didnt work either.All i had left to do was to remove the GPU and reinstall the onboard drivers and without my gpu pc worked great.
I'm using an Alienware M17x R4 with an Nvidia GeForce GTX 660m.
I've been using this laptop for about 3 months now and everything has been running fine. Yesterday, I was playing Skyrim testing out a new mod from nexusmods. I've read on the description and comments and there were no problems associated with the mod. While I was using it a received a BSOD. When I restarted the computer my resolution was reset. I right clicked on the desktop and the options for my Nvidia control panel were gone along with the other options for the Intel Graphics control panel.
After a while my first display adapter came back which was the Intel(R) HD Graphics 4000. I looked up as much as I could about the problem and it was usually associated with the display adapters being reverted to something like Standard VGA Adapter. This applied to the Intel graphics, but that was all. It was as if my graphics card vanished and I can't find it under device manager. When I try installing/reinstalling the Nvidia drivers it says that there is no Nvidia hardware. I've tried waiting a couple of hours with the laptop shut down, finding it in safemode, and searched for even more solutions. I can't seemed to find any. The last thing I did was check the BIOS and it said that the Discrete Graphics Card was not detected.
I upgraded my graphics card driver 2-3 days ago with no problems until today when my laptop crashed couple of times when I was playing LeagueOfLegends, and again when playing a video (using VLC). When I disable my graphics card driver all is fine, but when I play a game with the graphics card enabled I get a blue screen.
i have heard a lot of my friends saying that they are unable to play high resolution and high definition games on their pc and told that they are on a low budget to buy a graphics card.here is a solution for that:there is a software named 3-d analyzer available in the internet which acts as a virtual graphics card for playing games. you can enter the graphic card needed from the 4 available graphic cards available and then you can get the attributes of that graphic card..if fine tuned,you can play games at the range of a 128mb ram virutal graphic card on your non graphic card pc. note:graphic intensive games,that requires atleast 512mb of graphics memory can't be played through 3d analyzer if you don't have a graphic card,but you can try running it if you have a 256/128 mb card. steps for using the 3-d analyzer software, *first download the file from here, *then extract that software and open the software, *then,select the exe file of the game that you want to run, *choose the select option, *then you can choose the attributes the options you require to play the game,*the attributes may be pixel shader or disable rendering in the game or emulation or some other options specified, *then,enter the device id and the vendor id for the graphics card you need from the available graphics card on the right.*i would suggest the ati radeon 9800pro to run most of the games like fifa 08/09 or prince of persia two thrones/sands of time, *then choose the run option and then i assure that the game would run for you at a decent/playable speed. note:1.if it shows any error that a file is not found pls reinstall the software.2.if the screen turns black/blank then play with the options in the s/w, by trial and error method,if fortunate,may be,you'll be able to run your favorite game.3.if pixel shader/shader version x.x not found,then select the appropriate shader model and run the game. all the best..happy gaming..if any queries post it below.how to: use 3d analyzer video at Internet
In my windows 7 rating i have got 6.3 in gaming graphics but in graphics i have got only 4.9. Why this is happening? A graphics card which is good for gaming is that not good for desktop aero graphics?
anyone knows how the HD 2500 compares to the 3000 and 4000? I'm mostly looking for improved video transcoding compared to my Pentium G620 and don't really need the "gaming" graphics capabilities. But I haven't been able to find any information as to how the HD 2500 compare.
I am writing this right now because after the last BSOD it said "Windows can not start" and I had to restore to when it was previously working. So up until that point this is what I did.Since working with computers almost my entire life I know most BSOD are due to either bad memory, drivers, or bios. I started there and updated my nvidea drivers but it happened again. I moved to the motherboard bios.I did find a newer one on there and using ASUS tool I flashed the BIOS. Same thing still happened. Next I ran memtestx86 for 8 hours and it returned no errors.At this point I just decided to look for newest drivers for everything. One thing that happened consistently was that my wireless USB adapter from Cisco had to be unplugged and plugged back in for it to work. I went there first, reinstalled the drivers but still the same thing. I thought maybe it was my hard drive. I downloaded Seagates Utility tool and ran all the tests and they all passed fine. I ran defrag just for good measure along with windows version of the mem test and that passed as well. I still continued to get the BSOD and I have to tell you I'm irritated and also stumped.
Next I moved onto software. I have been using AVG free for years but I know virus programs do some crazy stuff and I got rid of that. Turned on windows defender. I decided that since the wireless adapter didn't work after these crashes maybe lets just go to a direct wired connection. I disconnected the cisco wireless adapter and I'm just using a direct connect right to my router.These come at random times.. nothing I do can trigger it. It can stay on for days and not crash and then there are times it can be up for 10 min and crash.Some of you might notice that in the CPU-Z screenshots I had to take the screenshot with the error underneath. Every time I chose either of the two slots it crashed the program.I have not done anything internally besides add some neon to my computer which does not connect to the board at all.I have seen IRQL blue screen once so I even went as far to go into the power settings for windows and make sure the usb and everything never went into any kind of "standby" mode.
I believe this is still under warranty and I would like to go in with good information if I need to challenge and get new hardware if that's what it is.On a side note I have not touched the memory physically. I know some suggestions were to reseed the memory and chip but In my opinion something that has been working for months that never moves off my desk and is never basically touched besides the power button shouldn't mean something just came loose after 4 months of owning it.Again that's just my opinion. I have removed AVG, Ad-Aware, Some webcam motion detector software (which was a joke) and the only thing that was really installed was Skyrim.
1 x Case CoolerMaster HAF 932 Full Tower Gaming Case - Black 1 x Case Lighting Liquid Neon Thunder Pattern Light - Red 0 x iBUYPOWER Labs - Noise Reduction None 0 x iBUYPOWER Labs - Internal Expansion None 1 x Processor Intel� Core� i7-2600K Processor (4x 3.40GHz/8MB L3 Cache) 0 x iBUYPOWER PowerDrive None 1 x Processor Cooling Asetek 550LC Liquid CPU Cooling System (Intel) - ARC Dual Silent High Perfornamce Fan Upgrade (Push-Pull Airflow) 1 x Memory 8 GB [4 GB X2] DDR3-1600 Memory Module - Corsair or Major Brand 1 x Video Card NVIDIA GeForce GTX 580 - 1.5GB - Single Card 1 x Video Card Brand === High Performance === EVGA Brand Video Card Powered by NVIDIA 1 x Free Stuff [Free Game Voucher] - Dungeon Siege 3 - Free with Purchase of NVIDIA GeForce GTX 550 or above 1 x Free Stuff [Free Game Download] - Just Cause 2 - Free with Purchase of NVIDIA Video Card 1 x Motherboard [SLI] ASUS P8Z68-V -- 3x PCI-E 2.0 x16, On-Board Bluetooth, Lucid Virtu Technology 0 x Intel Smart Response Technology None 1 x Power Supply 1000 Watt -- CoolerMaster RSA00-AMBAJ3-US 1 x Primary Hard Drive 1 TB HARD DRIVE -- 32M Cache, 7200 RPM, 6.0Gb/s - Single Drive 0 x Data Hard Drive None 1 x Optical Drive [12X Blu-Ray] LG BLU-RAY Reader, DVD�R/�RW Burner Combo Drive - Black 0 x 2nd Optical Drive None 0 x Flash Media Reader / Writer None 1 x Meter Display NZXT Sentry LX Aluminum Fan Control, Clock, and Temperature Display 0 x USB Expansion None 1 x Sound Card 3D Premium Surround Sound Onboard 1 x Network Card Onboard LAN Network (Gb or 10/100) 1 x Operating System Microsoft Windows 7 Home Premium + Office Starter 2010 (Includes basic versions of Word and Excel) - 64-Bit 1 x Keyboard Thermaltake eSPORTS CHALLENGER PRO Gaming Keyboard 1 x Mouse Thermaltake eSPORTS BLACK Professional Gaming Mouse 1 x Monitor 27" LCD 1920x1080 -- Sceptre X270W-1080P 0 x 2nd Monitor None 0 x Speaker System None 1 x Headset Thermaltake SHOCK Spin Gaming Headset - w/ Ergonomic Shaped Velvet Ear Cushions, Neodymium Magnet Speakers, In-Line Volume Controller & Independent Microphone Box 1 x Video Camera Connectland 1.3MP USB Interface WebCam 1 x Advanced Build Options iBUYPOWER Specialized Advanced Packaging System - Protect your investment during transportation! 1 x Advanced Build Options Professional wiring for all cables inside the system tower - Achieve exceptional airflow in your chassis 1 x Advanced Build Options Professional wiring for all cables inside the system tower - Basic Pro Wiring 1 x Advanced Build Options Professional wiring for all cables inside the system tower - Advanced - Power Package (Individually Sleeved 24-pin ATX, 8-pin CPU, and SATA Drive Power Cabling) 1 x Advanced Build Options Professional wiring for all cables inside the system tower - Advanced - Video Package (Individually Sleeved 8-pin and 6-pin PCI-E VGA Power Cabling) 0 x Case Engraving Service None 1 x Warranty Standard Warranty Service - Standard 3-Year Limited Warranty + Lifetime Technical Support 1 x Rush Service Rush Service Fee (not shipping fee) - No Rush Service, Estimate Ship Out in 5~10 Business Days
This started happening last night while i was playing Borderlands 2, it has happened at idle, playing just about any game in my library, during downloads and just browsing the web. I changed all of my accessible drivers, and it continued to happen, so i moved all of my personal files onto my external HDD. I re installed windows on my SSD (did not reformat) and reformatted my HDD. I re installed my drivers, re-enabled SLI and it ran fine for about an hour, just downloading WoW, and then happened again twice.
I started getting BSOD two weeks ago. As far as I can remember the first time I had a BSOD was on the day I installed Max Payne 3 (I read somewhere that the some guy had also this problem when he installed max payne). There were two occasions that I got a BSOD upon starting Max Payne 3. But lately I'm getting BSOD when doing low-load stuffs like browsing with no other apps opened. I've already done memtest with 10 passes with no errors. I'm 24 hours prime95 stable. I just don't get it! I've manually set my timings for my ram. I'm not doing any overclock. Everything is on stock settings.
I am brand new to this site so forgive me if I miss a step. I was wondering if someone who is good at debugging dump files could give me a second set of eyes on these 2 I will attach. One BSOD is DRIVER_POWER_STATE_FAILURE (ntoskrnl.exe) and the other is UNEXEPECTED_KERNAL_MODE_TRAP (ntoskrnl.exe).I have this problem across 15 identical laptops with fresh installs of Win 7 Pro 64Now my guess is this will boil down to a BIOS upgrade, but if there are driver conflicts within these dump files
I am the developer of a driver for a network adapter device that does scatter-gather DMA. Driver is not newly developed, but has had some recent changes.My client has a puzzling BSOD on one x64 machine after about 18 hours of successful operation. My x64 Win 7 machine runs fine forever. Client's box crashes in seemingly random places that indicate mem corruption.Mem test on machine was clean. Minidump is attached. WinDbg stack doesn't trace back to my code - it just shows the calls to handle the exception. Any clues y'all can see?System info from WinDbg:Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64Product:WinNt, suite: TerminalServer SingleUserTSBuilt by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506One difference between client's x64 and mine: Theirs has a valid DMA MapRegisterBase pointer from a AllocateAdapterChannel call, where mine (and my x86 systems) always have a null DMA MapRegisterBase
My computer has been stable for years, however recently I have been getting BSOD when doing any task. Windows will sometimes load to the desktop and I am able to watch video, run windows score, check email, etc before it will BSOD. Other times, it will BSOD before getting to the windows login screen.When I use safe mode, it logs in and stays there - no BSOD.I have tried removing all extra hardware in the machine, however this has had no affect. I have also tried one stick of RAM, then another, both BSOD.
Windows 7, 64bit, volume license (though OEM on the machine is also windows 7 64bit)1 month old hardware (10 days since I added memory). 18 month old OS install (backed up and restored, and drivers updated to new hardware)(Note that the older BSODs in the zip file are from old hardware)
I was having many random bluescreens on my old home build. I upgraded my Videocard to an Nvidia GTX 550 Ti thinking that it was videocard related. After fresh install I'm still getting BSODs.
Over the past months I have encountered a BSOD roughly every month and I want to get rid of it. The BSOD happens at random (at least as far as I know), not with specific tasks.This morning I started looking for the error and found that turning verifier ON might help in identification. I did this and rebooted a couple of times, every time with the same BSOD occuring during the boot stating something about dne64x.sys
System specs:
Windows 7 Professional x64 full retail version +/- 8 months old system, OS age is the same
I never used it heavily at the start and assumed it was just a driver and that i'd figure it out later.Well; now is later and I can't figure it out.I've done a re-install of the OS (HP recovery)This system is about a year old and is an HP Pavilion dv6 laptop with AMD Phenom II N850 Triple Core @2.2 ghz 6 gig memory 64 bit Windows 7 Home Premium.
I just bought all my parts, and I can't seem to get the computer stable. It is constantly BSOD or freezing and crashing during games. I've attached the SF diagnostic report for one of the dumps i guess.
