Admin Account Set To Standard And Unable To Change
Dec 3, 2012
I was at my Math class and my roommate texted me telling me my computer started to freak out. The computer turned itself on and the fans went extremely loud and a clicking noise started. I have a Sager Clevo P150. So I get back to the room and my computer was off and everything seemed fine. I started it up and my sticky keys were not set. This happened before though, sethc.exe was not in the right spot. I fixed this before by putting it where it correctly goes and allowing full control to my admin account. I tried to do this again and it would not let me. I went to User account and found out my only account on this computer is set to Standard. Don't ask me how this is possible, so now I have no admin account on my own computer and I don't have full control over it. I tried bringing up the command prompt and manually activating an administrator account by doing: net user administrator /active:yes and my access is denied because I am not an admin account. I then booted my computer in safe mode and tried to access the admin account that way. Which there was an admin account but a password attached to it. The password is not what my password is and I did not set any other password because there was always only 1 user. So what the hell do I do?
i have accidently changed all my accounts to standard and cant change back to a admin account. i'm required to put in an admin password for permission but there is no where to put password.
I have always been running admin and even until now I run as admin. But, I have been doing a little bit of research and realize that using a standard account is a safer practice. I have never even used a standard account.Is using a standard account a better practice? Also, how does doing average task such as installing programs and updating work through the standard user account?
I basically had 3 accounts on my computer, one being "Administrator" (w Admin rights), one "test" (Standard User rights) and one more "User" that is the one I use most frequently (with Admin rights). When I last used it last Friday the User account was still present and all my programs were working fine.
However, when I came back to office today, I found that the User account was missing from the welcome screen, and only the "Administrator" and "test" account were there. Somehow, I could not login to the "Administrator" account. When I logged into the "test" account, all the program shortcuts were blank (Firefox, Adobe Reader Etc) and only IE and the default windows programs would work. I suspected that there might be a virus, but I couldn't install anything because I did not have the admin privileges.
My question is: 1. How do I get back into my admin account? 2. is there any way to install anti-virus programs (by going around the admin account) to solve this issue?
I'm basically stuck with a standard user account and I can't do anything with it. I tried using System Restore on the Standard account, but when I click "Open System Restore" nothing happens.
Ive accidentally deleted/disabled admin account through standard user.Now I cant get it back, so I cant run anything which needs admin right, even enabling admin account What now? I wanted to format partition and install windows again, but another problem, I get error that windows install process cannot find drivers for my dvd rom! LOL! but windows was already booted from that dvd. wtf.
for ACER 5740 G WIN 7 home premiumi enabled the administrator in WIN 7 Home Premium with a password and hide this for the log in. All other users are standard users. Now I am unable to login to the administrator log in opiton. How can I unhide the administrator log in. Since I did this I have administrator password.
I recently logged onto my account about 2 days ago to finish a project. The music file I used for the account was could not be found and when I went to locate it I was told I didn't have administrator rights. I went to Control Panel because I was sure I was an Administrator, but sure enough, I was set as a Standard User. I tried changing it up but it wouldn't change. I tried changing the account name also, and it wouldn't change. I could only change account picture. I can't open UAC, I click it and it blinks but nothing opens. I deleted any recent program installations,I booted in safe mode, however I was still not able to change my account,I tried activating the hidden administrator account but I received an "access denied" message,I tried creating a new account but I received the following message:"The specified account name is not valid, because account names contain the following characters: /[]":;|<>=+,?*Please type a different name."I didn't use any of those characters in the account name.I ran 2 different virus scans, and they came up with nothing,I turned the computer off, unplugged everything, and pressed the power button for 30 seconds, and rebooted, but still nothing!My roommate shares this computer with me, and her account is still an administrator. However she has traveled and I haven't been able to get hold of her yet. We share music files and the file I was trying to use is in her account.why my account was changed and how I can change it back?
My account was changed from admin to non admin, and now can't access my account. Unable to install programs, tho I can save files, burn ISO images, etc. Need some help, or ideas to recovery, not remove the password.
I am using Windows 7 Pro 64x and apparently the default user account (Owner) that I use is not working correctly. Unless I have UAC set to Never Notify, I cannot open Control Panel or UAC again. I have created a second user account as Administrator and it works correctly.
I would like to know if there is any way to fix this problem short of a clean install of Windows. If not, is it possible to move all of my settings to the user account that works correctly and delete the one that does not.
I am trying to change the folder properties of a applications folder from read only. I am doing this per instructions from the apps provider to prevent crashes.
When I go to change the permissions it states I need admin privileges. The only account I have on the box is the admin however I did change the name to something besides admin. The account is definitely an admin account.
I put a folder in my admin acct it also appears in the guest acct which is dangerous. I need both acct's but how can I put is only in admin. When I delete it from the guest acct is disappears from the admin acct too.
My friend and I share my laptop. Recently I found out that he was watching porn on my computer. So I promptly confronted him, and told him to stop. Weeks later, he did it again. So I downloaded Norton's Safety Minder to prevent it. So this sneaky prick goes around and enables the guest account, and lo and behold, porn fest again.What can I do? I don't want to keep him off the admin account, because he plays games on here, but I don't want him watching porn on my laptop either. Is there a way to put parental settings on the guest account? I know you can disable it, tried that, he just re-enables it, then disables it before he gets off. I'm really frustrated about this.
been about week i kept trying to get firefox to download onto my pc. But when i get it to download after that done.i go to run the installer a pop says i need to have admin rights when im on a admin account. im running win 7 64bit . i have a image of the screen that requires me to have admin rights.
I'm building a Windows 7 PRo PC for a local club and want to lock down the PC. I have setup an Admin account, and set the main user account as a Standard account. I also want them to be able to use W7 Backup/Restore to backup the Standard Users "My Documents" folder to memory stick on a weekly basis. However, Backup/Restore will only run:
1. From the Administrator account , or 2. When executed from the Standard account it requests the administrator Password.
So in other words, it appears that for a Standard user to run a backup they need Admin rights? Kind of defeats the purpose of having a Standard account in this scenario. Is there any way to confer specific "rights" to a User account or Profile to access/execute specific programs? In this case allow a Standard User account the normal access, plus Backup/Restore (only) with conferred Admin rights?
I run Windows 7 on a Sony Vaio, and never had issues.recently I had this situation where some software doesn't run properly on my main account (admin) but only in a secondary account I had created the software is installed without problems, but then it fails to run properly as an example I have a small car speed detector which has a software to download journeys. it doesn't run as it should on the main account no matter what I try. similarly i bought a Sony Bloggie and its portable software as well as the main software that came with it don't work properly, but they do on the other account, so I (annoyingly) have to switch users, and run the software there, and then go back to my main account.I suspect some anti-virus or other stuff from my main account is "blocking" things somehow. I also had a number of instances where I get alerts like "windows cannot open this file for security reasons". I have tried to change security settings, firewall settings but nothing worked.there was a general security level that required admin status to lower, yet although I obviously am admin, windows wouldn't allow me to do.
I set up four Dell Computers with Windows 7 Home Premium. Used my administrative account to install software (Microsoft Office Suite), Microsoft Security Essentials, Ccleaner, and Malawarebytes. All programs installed properly. As these computers are going to be used in a public place by junior and senior high school students, I thought it would be best to set up a standard user account for each of the four computers. I have it set up but when I log in as a standard use (non administrative) all the programs that were installed are not available. Tell me if I'm wrong. I think the programs would still be listed in program files when the standard user is open. Can I go to each of the programs and right click to open and then be prompted to key in my administrative password. I would think this should allow the program to be run in the standard user desktop.
I occasionally come across some functions that I can't access through my standard user account. The latest one is Start/Default Programs/Set program access and computer defaults. It tells me I do not have permission, no opportunity to elevate rights, so I had to log into the admin account.
I tried starting Control Panel using Run as administrator and going in through there, did the same thing.
how to gain access in way that allows the UAC elevation?
I have set up a standard user account on my Son's laptop, but there are software programs I would like him to have access to, without me having to log on with Administrator ever time.When he try's to run said program it says Parental Controls has blocked this program the Administrator can grant access. I don't have any programs blocked under Parental Controls. Is there a way to grant access to certain programs without having to log in as administrator every time while using a standard user account?
In one of my user account( standard User account) i cant see folder icons ,thumbnails etc but iam able to see all folder icons etc in my admin user account? .even,my computer icon in desktop is corrupted and not properly visible.in windows explorer also,it is the same case.
Okay so i dont have access to any administrator accounts due to the fact that our admin forgot his password and the rest of us are standard users. So can we enable it as a standard user to use the admin account in safe mode?
I'm having a problem with this known bug in UAC related with subst and mapped drives and can't find a workaround.
I have a standard user account (NOT in the administrators group) which I use every time and another which is an admin which I use only to elevate processes though UAC when prompted. I'm used to have a drive mapped with the "subst" command to point at a local directory in my hard disk, which is run at each logon with a bat file placed in the startup menu.
Problem is that, whenever I elevate any program with UAC, that program doesn't sees the mapped drive. Moreover, if I try to elevate a program whose executable lies in the subst'ed drive, after prompting for my password it says the .exe I just double-clicked doesn't exists.
Has anyone solved this problem in some "elegant" way? I don't really like to get rid of that drive for convenience, and using the full path to the real file is just a pain.
So I have an administrator account for maintenance purposes and I also have my frequently used standard account. Usually, when you right click on a program, for example: Spybot S&D There is an option to "Run as Administrator". And if you click it, it prompts for an admin password.but for me, it does not ask for an admin password, it just ignores the fact that I clicked that completely, and runs it as a standard user.
This happens whenever I need admin privileges for something. I cannot elevate my privileges on a standard user account.It used to work properly, until I changed my account type to standard, and enabled the Administrator account.
Is is possible for an administrator to create a Scheduled Task for a standard user and prevent the standard user from deleting the task? If yes, can you explain or post a link to a tutorial?
how to Remote Desktop Connection connect to a Windows 7 standard account?All attempts to Remote Desktop Connection connect to a Win 7 standard account fail with:Attempts to the same account change to administrator succeed. But I cannot afford the risk of this account being administrator.The machine running RCD is Win XP, on the same switch.
I set up a standard user account on my desktop and it worked. I did the same thing with my laptop and when I try to enter a password in my standard user account on the laptop, it says the logon feature will not support it. Is there something I am overlooking seeing that it works on the desktop?
