my aspire 7741z needed a new hard drive, as well as the optical drive, I got both through Acer, I should have cut my losses and used it as a boat anchor. I didn't I bought to start up system disks and the recovery disks, They will not load, i get missing the operating system.
View 2 Replies
I got a Acer Aspire 5738Z laptop with Windows 7, I created recovery discs and then got windows 2000 installed on it. Now I wanted to get back win 7, so i inserted the first recovery disc and started recovery. On reaching the second disc, i got some error message and recovery failed. On restarting getting message BOOTMGR is missing. I tried reinstalling with first recovery disc but not working. So now I dont have any operating system on my computer and the recovery discs also not working.
View 4 Replies View Relatedcan't find an audio driver for my Acer Travelmate 8100..
Realtek ALC880(D) @ Intel 82801FBM ICH6-M - High Definition Audio Controller [B-2] PCI
any ideas please?
I got a Acer Aspire 5738Z laptop with Windows 7, I created recovery discs and then got windows 2000 installed on it. Now I wanted to get back win 7, so i inserted the first recovery disc and started recovery. On reaching the second disc, i got some error message and recovery failed. On restarting getting message BOOTMGR is missing.I tried reinstalling with first recovery disc but not working. So now I dont have any operating system on my computer and the recovery discs also not working.
View 5 Replies View Relatedmy Acer Aspire 5738G to factory settings. (I've done it before and i never seemed to have a problem). I know it should be simple to do this, by simply pressing "Alt" and "F10" at the Acer Splashpage when you bootup, and going to the acer eRecovery page. But when i do this i get the error message."HDD RECOVERY VALIDATION FAILED" I've tried my hardest, searched all over google for a solution, but every problem seems to be different.And i can't figure out what is particularly wrong with my computer. I am only an amateur when it comes to computers, and disks, partitions, locating partitions, etc etc is not my strong suit. Is there anyway i can check if the hidden partition "PQservice" is still in my drives? If it helps in anyway, i though i might mention that the previous time i restored back to factory settings.When i completed it, i didn't fully complete the windows installation process, and now whenever i log into my computer, it mentions that my "windows is not yet genuine, click here to register it blah blah blah". I didn't bother doing it because i assumed it wasn't vital, i was and have still been able to use my computer fine for the past year or so without having to do it.
View 3 Replies View Relatedmy daughters acer laptop has the following message: windows failed to start. a recent hardware or software change might be the cause.. etc.. insert windows installation disc and restart. we do not have the installation disc.
file: windowssystem32winload.exe
status: OxcOOOOOOf
info: the selected entry could not be loaded because the application is missing or corrupt.
How can I get a boot disc?
how to find missing acer files from start menu
View 1 Replies View Relatedhow to solve the missing operating system error in acer laptop
View 2 Replies View Relatedi want to download the drivers how can i download
View 1 Replies View Relatedmy acer aspire 5551g laptop lacks both network controller and ethernet controller where can i get these drivers
View 1 Replies View RelatedI have a Compaq Presario CQ56 64-Bit (Windows 7 Home Premium) laptop that I bought before the summer, today a Windows Update has given me an Acer display update published on the 28/12/2011. I thought because I had my vga cable plugged into the TV Windows Update may have become confused but despite checking for updates again it still appears there as optional.
AMD/ATI is recognized by Windows and Windows Update and there had already been a display driver update not so long ago, so I cannnot understand why I'm receiving an update for the wrong machine?
When i turn the computer on i get the screen : setup is starting service. Install Windows. The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install windows, click ok to restart the computer, and then restart the installation. I have contacted acer they tried to help with the ALT and F12. Nothing I have tried works.. They told me to order the recovery discs for $20.00. I did , and they dont work either... I contacted them back, and now they say to send it back to them and for $199.00 plus shipping, they will repair the computer..I do not have the money for that..I have the the system disc, the 3 recovery disc and the language disc , that I just ordered from Acer for $20.00.
View 3 Replies View RelatedWhen I press down f10 and ALT at the same time during boot up from the factory recovery disk when seeing the splash screen, nothing happens and the 'acer laptap just boots from the regular hard drive as usual.
View 1 Replies View RelatedWhich is a better buy? acer 4736z or acer 4736 ?
View 6 Replies View RelatedI just got a computer for free, a Dell Studio 1555. When I got it, it would try to boot, then come to a screen that said that bootmgr.exe was missing. Sometimes I got a message that said something like mpio.sys was corrupted or missing. I have a Win 7 disk, so I put it in and tried to repair the installation. Each time I ran it, it said that the repair had failed. I tried to reinstall windows 7, and It made it to the first restart in the process. It showed the "Starting Windows" screen, but the colors of the windows logo never appeared, then I got the missing bootmgr screen. I decided to install Ubuntu and see if that worked, and it did (I installed it alongside the Windows installation). It was Ubuntu 10.04. I thought, "OK, so i'll just use this as a Linux machine"...and I decided to go back and reinstall so that I could use the entire hard drive. It never worked correctly again. Each subsequent time that I installed Ubuntu, I was told something along the lines of "Gnome Power Manager did not install correctly" and got a slow and choppy Ubuntu installation.Tried to install 11.10, and it failed completely. I opened the Ubuntu live from my usb drive, and opened the disk utility. I now cannot format, reformat, partition, or delete partitions on the drive. Is all of this just a case of a hard drive on its last legs, or is there something else going on here?
View 1 Replies View RelatedOk i have windows 7, Recently i have found out that i have a full list of errors that happened pretty much overnight:Here's the list 1. I can't go onto Control Panel It say's " This operation has been canceled due to restrictions in effect on this computer. Please contact your system administrator" I AM THE ADMIN.. I am the only account too. 2. My Task bar is missing, When i go ctrl-alt-del i see no option to open up my task bar. [FIXED] 3. I cant RIGHT click on anything on my desktop, as well as my folders and stuff. Although i can right click while playing games or browsing the internet, so my mouse is definitely not broken. So u must be thinking, this guy has a virus for sure... Well if i do have a virus it must be made by ******* Bill Gates. Because i can't find it.I have the FULL version of Trend Micro Cillin as well as Norton 360, I've just recently downloaded Malvare Bytes, and that couldn't find anything as well. I've done a full system scam on both anti-virus programs, i see no viruses. I did get a virus a week ago, but Norton quickly picked it up, I'm thinking it may have changed a few settings in my computer before i managed to delete it.
View 3 Replies View Relatedwhat this notification means and what could be done to rectify matters:--- "Missing Events in Event Log.....19% (3,985) missing"
View 3 Replies View RelatedMy setup had an MBR issue a few days ago after installing Skyrim. I was unable to repair it using the windows 7 instal disc. I tried the automatic fix as well as bootrec.exe. After giving up and reinstalling a fresh windows 7, my rig has not been starting up properly. It insists on waking up from sleepwhen it was shutdown, i.e. Not sleeping. Well after a few days of this with no other problems, bootmgr can't be found again. Now, when I load the repair disc, it can't find my OS to even try a bootrec.exe on. But, when i go to load drivers the explorer window allows me to browse my c:/ drive and the installation is there. I would prefer to fix rather than reinstall due to a symantec DRM issue.
Windows 7 is on a 60 gb raid 0 setup (I know, i know, i deserve this for running raid 0)
i have a 2006 acer laptop that just recently decided not to get onto the internet. it will connect to the network but no internet. i have looked at more forums than i can count but to no avail. i will try to list the problems/symptoms but i am not familiar with programming language and don't know exactly what all the command prompts are suppoed to achieve and the like.-isatap ipv6 adapter is not working (some people say it does'nt matter but???)-ip address starts with 169-ipconfig /release and release6 does not workbecause "an address has not yet been associated with the network endpoint"-ipconfig /flushdns does not work because "function failed during execution"-cannot displaydns because "dns cache is unavailable"-cannot registerdns because "rpc server is unavailable"-checked my services and found some dependant ones that i could not manually start ERROR1075: DNS client service, tcp/ip netbios helper, routing and remote access, internetconnection sharing (ics). all failed to start with the same error code 1075-ERROR 10022- netlogon service-tried "netsh int ip reset" but reset echo request failed. "access denied". i am the admin for this computer. it worked the first time i tried it with no errors. now i get the failed echo message.
-cannot setclassid "as know adapter is in a state permissable for this action"-i saw something about the dhcp-read on one forum that people were having trouble after deleting norton(symantc) programs. i have deleted norton programs and think i got all of them (how to be sure?)-netsh winsock reset successfully-tried regrepair, regseeker, and a few of those "free download" programs that say they will fix your problems after you register/purchase them. i figure if the computer can stop working so easily i can get it to start as easily. maybe that's naivety speaking.-i have scanned my cpu for viruses (naturally) with 3-4 different programs (maybe norton would have found something).clean-thought it might have something to do with the registery since i had a nasty virus everal months ago that i think changed it somehow.-of course my system restore points are dated after this problem occured.-i bought the computer at staples and it did not come with a windows startup disc.
i can't think of any more though i know i've tried more than is listed. the dns and rpc servers seem to be the main coulprits but how do i fix that? also possibly the norton issue? i've read so many forums i'm seeing triple and everyone seems to suggest the same things. i've tried them so many times (to no avail). i've even changed the network adapters ipv6 and ipv4 adresses to 208.67.222.222 with the alternate. nothing. there has to be something i'm overlooking but what
It turned on like it usually does with the ACER logo on the screen, but it goes to a black screen came that said:
We apologize for the inconvenience, but windows did not start successfully. A recent hardware or software change might have caused this.
Followed by some more text, and then it asks how I would like to start windows up, in safe mode(s), last known good configuration, or start windows normally.
So I just select �Start Windows Normally� and it started to boot up, with the Microsoft Windows 7 loading screen. Then KABLAM! The black screen with the different options popped up AGAIN. I then tried every single other boot option, all the safe modes, everything, and every time it would show that black screen with the different boot options(that don't work). So I hit F8 and tried all the options in there, reboot, debugging mode, all of them, they all did the same thing and brought back to that dreaded black screen. I tried everything...except for the obvious destructive restart.I know I will probably have to do a complete restart of my computer, but before I do that, how can I backup data from a non-functioning laptop? Right before this happened, I was going to backup my data, but this happened. I know I need to do a backup all the time, but I was being dumb. I deserve this.
Just noticed they have windows 7 drivers on their website for anyone whos interested.
View 6 Replies View Relatedhow do i fix my acer one wifi i justed download windows 7 and it say that thereis something wrong with the connetion to the wifi
View 2 Replies View Relatedmy acer laptop is not able to tap on anything...
View 1 Replies View Relatedmy laptop is stuck on the following mess " setup is starting services " I have no idea what this means cause its been stuck on this mess for days.. I can shut it down but when i turn it back onit goes right back to same mess and its frozen there. I have tried pushing the F8 button and that doesnt wk either.
View 1 Replies View RelatedEverytime I switch on my Acer 5740 Laptop, after it reaches the POST screen displaying the Acer logo and Setup (F2) and Boot Selection Menu (F12) the laptop restarts over and over again and never stops. It has only been doing this since i installed a new program, after i installed it a blue screen appeared saying "STOP", and a bunch of other text but I couldnt make out what it said as the screen disappeared so fast. It is probably the work of a virus of some sort.I have already tried to boot from my recovery discs, but after the restoring the OS to factory settings, the same restart loop happens again. I cannot even access safe mode as it immediately restarts after displaying the acer logo. But I am however able to access the BIOS setup (f2) and the boot selection menu (f12). I know for certain that I have no hardware problems as the system was working perfectly with no errors up until I ran the program and feel that this may be the work of a virus.Here are the details of my Acer Aspire 5740 laptop that I have acquired via the Setup menu:
CPU Type: Intel (R) Core(TM) i5 CPU M 430 @ 2.27GHz
CPU Speed: 2260 Mhz
IDE0 Model Name : WDC WD6400BEVT-22AORTO-(S1)
IDE0 Serial Number: WD-WXF0AB957752
ATAPI Model Name: Slimtype BD E DS4E1S
[code]....
Will a new W7 (with new hard drive) work on Acer E700? Keeping hearing that there are problems. Acer says to not do it.
View 4 Replies View RelatedI have an Acer external HDD, 750Gb, and I use it plugged into my PS3 to store kids programmes when the Ps3 HD is full. I wanted to add a few other movies I have converted to mpg2, but I can no longer access this drive on either of my laptops (Windows 7) It still runs runs fine on the PS3. It is of course formatted to fat32 to allow the ps3 to access it. when plugged into the laptop, I get "Disk E" rather than "Acer". When I try and access it, I get "Drive E needs reformatting".I have tried to access it in smart mode, and from a DOS prompt.
View 4 Replies View RelatedIve got them from the acer website for my 6935g and it all installed fine but as i go to set up my prints all 6 scan propetly but at the end it says finger enrollment failed. Anyone managed to get them to work?
View 5 Replies View RelatedI have my daughter's Acer 4820T laptop running Windows 7 Home Premium with 4GB DDR3 memory. The original HD failed, and I had to purchase the eRecovery media from Acer as she had not created them when it was working fine. I installed the new HD a 500GB Seagate, but when I run the eRecovery, I am able to choose the UI Language, and on the next screen where the choice of recovery options appear, the only one of the 3 options available is Exit. Both the Restore to Factory Settings and the Restore OS Saving Data options are grayed out. I tried changing the SATA method in the BIOS from ACHI to IDE. I wrote Tech Support but the system is 18 months old and out of warranty, and the only help they offered was to tell me to partition the drive with one partition formatted NTFS, directions to their support link.
View 1 Replies View RelatedI have just brought acer M7200 with vista 64 so I am entitled to a Windows 7
upgrade disc, now what's the best way to upgrade it, just upgrade then if ok just delete the windows.old file after or do a clean install.
if i do the upgrade will it leave loads of rubbish on the computer/registry after to sort out .
I just got a new laptop, Acer 1410 and have gotten my Windows 7 upgrade disk (just did a standard install). I really desire for this thing to be as bare bones as possible without one bit of the preloaded junk on it. I am gathering this is one reason why people do what I see from this website is called a clean install?
I know the basics and catch on to technology well but I am no regular computer wiz, so is this something I should attempt? Will the laptop function fully? Anyting this dummy should know?
