I have a workstation that was originally a member of a network. The computer has several programs that now cannot be "uninstalled" because there is no access to the network.
Is there a way to uninstall without being able to access the network where it was originally installed?
So a few months back I got myself an Asus G60VX with Windows 7 64bit on it. Everything was going good until one day it wouldn't go past the Windows graphic loading screen. For hours. It was very frustrating.
In order to backup my hard drive, I brought in an Ubuntu Live CD to temporarily run Linux and backup my files on an external hard drive. Then I used the CDs provided for me by Asus to recover/wipe the system. Came with 2 discs: One titled "Windows 7 Recovery for Windows 7 Products," the other, "Driver&Utility Ver 1.0 G60VX."
I booted up the Recovery CD, it booted up. After a few tries with it freezing up along the way, I finally made it through the recovery, and the computer requested the "support CD," so I put in the Driver/Utility CD. Again, after multiple tries with it freezing up along the way, I FINALLY made it through the driver installations, and it brought me to the screen: "Setup is preparing your computer for first use."
There is now nothing I can do to get past it. I've tried F8, starting in safe mode, no matter what I do. The reason this is pissing me off so much is because I'm totally going the legit route and everything.
How can I find Microsoft inc.'s Spider Solitaire in Windows 7?
View 3 Replies View RelatedI have a brand new acer aspire notebook and I'm trying to connect to my airport extreme card built into my iMac desktop. The laptop sees the signal just fine, but it will not connect to the Internet and I get "limited access". What can I do to connect?
View 1 Replies View RelatedLast night I was on the internet at home absolutely fine and my laptop automatically downloaded an update, since then I have been unable to connect to my wi-fi. I deleted the updates and was still unable to connect, so I tried to used a system recovery restore point and every one I use starts but fails to complete.So, I did a factory reset after around 8 hours of trying to sort it out today and I STILL have the same problem. I can plug in the cable to connect and my housemate is having absolutely no issues connecting and neither is my phone so now I am at a total loss what I should do to resolve this. Prior to the factory reset I was able to connect to the wi-fi but it was stating no network access/limited access and now it simply won't connect to my internet at all. It finds my full strength signal but will not connect.My drivers for the Broadcom 4313 802.11b/g/n card are the most up to date and the laptop (HP G62) says it is working fine.
View 2 Replies View RelatedToday, I managed to redecorate my bedroom; where my computer sat on top of a shaky, wooden desk. That desk is now gone, caput, and replaced by a much bigger, sturdier and prettier glass replacement.Before I dissasembled the computer to re-decorate, I was able to browse the internet at ease. There were no problems at all...However, after the new desk was setup - and all wires replaced in their correct slots, I find that I am unable to connect to the internet, or even the house's network! For the past year, I have been wired to the router using a RTL8168C(P)/8111C(P) Family PCI-E Gigabit Ethernet NIC. It was plugged into an extension cord, in my room, into the Ethernet port in the back of my computer. Downstairs, it's twin was situated no less than 2 feet away from the router - plugged into the first port.Now, when I boot up the computer, the network notification presents the following message: "Unidentified Network. No network access", and sometimes presents a yellow ! next to it. So, I am reduced to typing on my mother's laptop - which has no problems connecting to the network.I am able to use the ipconfig /release command, but unable to use the /renew - it hangs in the command prompt, then tells me that the DHCP server cannot be located. The IP, beforehand, was reverted to 169.254.223.117 - before all of this, I was 192.168.0.5?
View 2 Replies View RelatedI installed openvpn correctly but I can't access internet using it.
View 1 Replies View Relatedi had aproblem of getinf my e-mail now since i install windw7 ultemate ,so i like to know how to seti it in order to get my e-mails
View 1 Replies View RelatedI have just installed Thunderbird to access Gmail for my emails.When I 'Getmail' my emails in T'bird it doesn't find any but if I go to Gmail website they are in my inbox. I can then forward them to myself (gmail address) and Thunderbird reads them ok.
View 3 Replies View RelatedI have 2 different laptops. both running Windows7 and connecting to the internet wirelessly. within a few days of each other they both began to display "Currently connected to: Unidentified network No network access" and they will not let me get on the internet. It is not my router becuase It shows the same thing no matter where I try to connect. I have tried my gym and a local restaurant that I have always had success connecting to before. Furthermore my WindowsXP desktop is directly connected and is connecting to the internet without any problems. My laptops are both running AVG for antivirus.
View 4 Replies View Relatedmy laptop doesn't connect to my wireless network, neither by cable (wired).
View 9 Replies View RelatedYesterday it worked and when I booted today it didn't I have absolutely no idea what the problem is and I have checked everything I know with no use.
- I am using d-Lan (PowerLan) and have had no problems with it until today.
- My router, modem and the d-lan devices are functioning properly which I have tested multiple times so I'm sure the problem lies with my computer.
- I have tried Troubleshooting with no effect
- It isn't an IP conflict
- It isn't a 3rd party program (I started it in safe mode, same problem)
- Internet still works over my W-Lan but is incredibly slow and unstable
For boxing day, I bought myself a new Computer case, a Cooler Master HAF 932. After setting it up and booting my computer, without any problems, my Internet would not work.
I attached the Network & Sharing Centre screen to show you what it says. I've tried many things, switching cables, direct input from modem (I use a router), and all sorts of guides that have similar problems.
I'm new here. I bought my eMachines ET1331 desktop with pre-installed Windows 7 Home Premium 64-bit a year ago. However, three months ago these lag-spikes started. I've been told by many that re-installing original network drivers can fix this problem. And, it makes sense, as these lag-spikes never occurred for just shy of a year. Is there a way to re-install a pre-installed driver without the CD? If not, is there a way to identify my pre-installed driver and download off the Internet?
View 3 Replies View RelatedI've recently came on my desktop and i realized that the internet connection was off it had a red XBut it was working fine before? im not sure what happened. Anyways i cannot seem to find the driver to download it nor do i know what it is.Amd Athlon ii x2 245 processor 2.9ghz4.00 gb64 bitati radeon 4200insiprion 570dell
View 3 Replies View RelatedI am working on my bosses personal desktop. It had windows xp 32bit. Due to a virus the hard drive had to be wiped. He purchased windows 7 (32bit) to be installed.It's an older hp (about 3-4 years) with a intel pro VE 100 network card.the hard drive was completely wiped (including the partitions) and windows 7 32bit was installed.dispite what i select as the network type, it conitnues to set it as an unidentified network. I have tried reinstalling, wiping it again and reinstalling. It conitnues to set it as unidentified
View 1 Replies View RelatedWindwos did not show any network connections in the network connections window. I tried everything that I could find online but nothing worked. As a last resort I decided to reinstall the driver for my Intel 82566DC-2 Gigabit network connection. I uninstalled the old driver and then installed the latest drivers but now I get code 31 (cannot find the driver software) in device manager and the connection doesn't work.
View 8 Replies View RelatedI just installed Windows 7 onto a Dell Vostro 230. After installing, the internet has a red X on it and it says no network adapter. I have no idea what to do.
View 1 Replies View RelatedThe network is connected and working fine (well not fine, but will get there).Bat the Network and Sharing Center is not recognizing that it is connected or that there even is a NIC installed.I can surf the net and connect to other computers, but, any program that depends on the information from that specific component Seams to not be able to connect (IE Logmein) and also I'm unable to configure my network as a "work network" so I had to remove the windows firewall so I will be able to connect 2 my SQL server and network shares from other computers on the company's network.Solutions I have already tried:1.Reinstall NIC driver from gigabyte website.2.Install Realtek Ethernet Diagnostic Utility3.Installed FixItCenter from Microsoft.4.Netsh winsock reset (As admin)[CODE]
View 3 Replies View RelatedI just reinstalled windows 7 ultimate 32 bit (I have the disc) but I cant connct to internet for it says there is no properly installed network adapter. o.Windows 7 Ultimate x32Version 6.1.7600 build 6700Intel Pentium (r) dual core cpu E5700 @ 3.0GHzBios version/date : American megatrends Inc. 080015,1/17/2011Problem Devices thernet Controlled PCIVEN_1969&Dev .. Etc..The drivers for this device are not installed
View 1 Replies View RelatedI booted up my Win 7 (32 bit) PC this morning and noticed that it was not connecting to my wireless network. I went to check the network settings in device manager and I got the message "The specified service does not exist as an installed service". I can see the file devmgmt.msc in the C:WindowsSystem32 folder, but when I run it from there I get the same message "The specified service does not exist as an installed service". I am also seeing this same message when I insert my Windows 7 CD and try and re-run the setup. Even if I try to run anything as an administrator, I get this message "The specified service does not exist as an installed service". Is this some sort of Malware? Is there any way of recovering from this?
View 9 Replies View RelatedI reinstalled windows 7 and upgraded from 32 bit to 64 bit. everything went well but my drivers for the ethernet, network, and pci simple communications controllers are not installed and i can not connect to the internet. please help
dell vostro 430
windows 7 64 bit
The company that i work for has just bought five new HP Compaq 6000 Pro running Win7 64bit (one for each department i.e. Trade Finance, Operations, Compliance, Accounts & Credit). I created standard user account for each member of the respective departments as well as admin account for myself. I setup a workgroup to connect all PCs to share a printer that is connected directly to one of the PC (Credit dept).
Here's the problem:
Three of the PCs (Trade Finance, Operations & Compliance) can access Credit PC and vice versa without any problem. However, Accounts PC will get an error message: "Logon failure: the user has not been granted the requested logon type at this computer" everytime trying to access Credit PC when login as standard user. But when I login as admin, I don't get any error whatsoever. Same thing happen when I login from Credit PC and access Accounts PC. No error.
I have disabled the firewall for both Accounts & Credit PCs and even changed all user accounts for Accounts PC to admin but still keep geeting the same error message.
I have Windows 7 Pro 64 and I am trying to access an XP machine that is on the wireless network and when I click on that machine's name, I get a Windows Security box asking "Enter Network Password" and it has fields for User name and Password.
I've never seen this box before and I don't remember ever setting a password for the XP machine. I can access my Windows 7 laptop successfully. How can I access the XP machine?
I set up a new wireless connection and its done perfectly but I can't access from other device ( Ipod touch) the access type: no network access whereas the assess type it must be internet who do I solve this problem.
View 7 Replies View RelatedI have this machine and an XP machine on my network. The XP machine has the link layer hotfix installed for SP3. Both machines are fully updated.
Now I had a couple of hard drives shared and the XP machine had access to them without any issues at all. I needed more space on the music drive which was an external USB drive. I bought a Western Digital 500Gb internal sata drive and installed it. I moved the music to the new drive and shared the drive the same as the other drives were shared.
This is where it gets weird. The new drive shows up as a network location on the XP machine however it cannot be accessed. I get an error saying I need to make sure I have proper privileges. I do have them because the drive has full access for everyone assigned to it in permissions. The XP machine can still access the other drive I have shared with all my videos on it. So the problem is only with the new drive and all of the settings check out.
Anyone else have this kind of problem?
I have two internet connections, BSNL Broadband and Reliance Netconnect. I have been using both connections since last year and I have never faced this problem of "Unidentified network" and "No network connection". It was only in June this year that I began facing this problem. When my BSNL is connected, my PC does not detect it yet I can access internet. The networking icon in the task bar shows a Yellow Caution sign. When I use Reliance Netconnect, I can access internet but now, the yellow caution does not even appear, in fact there is a red cross. I have tried numerous trouble shooting steps like the cmd commands, disabling and enabling network adapters, etc but to no avail. However, when I put this in cmd "netsh winsock reset catalog", Reliance suddenly showed as active when I rebooted my PC. The Origin service of Electronic Arts happily went online. Then I disconnected Reliance and tried BSNL but no luck there. I reverted to Reliance and again the same problem. I repeated the steps again but still the same problem.
View 1 Replies View RelatedI have installed windows 7 RTM build 7600 and I have a yellow triangle with exclamation mark saying no network access but I can connect to internet. I am directly connected to internet via DSL modem D-Link 360 R and do not have router. This is on desktop computer. When I disconnect from net the exclamation mark shows and it's very annoying so can somebody help me?
View 9 Replies View RelatedHave 2 nics, 1 for INTERNET and 1 for intranet. Internet works fine until I set up #2 with default gateway then I get a error message when leaving properties box. something about redundant default gateways. If I leave this in place #1 network stops working. I have tried to just setting #2 to auto both ip and gateway. I can't even ping the server. It doesn't leave the computer.
I thought it was the nic card because i riped it out of the old computer and the driver wouldn't work for the Windows 7. So I bought a new one that was compatible with Windows 7. Nothing has worked. The problem is that this is not my computer it's my wifes, and she's not a happy camper. This set-up worked on the XP that was taken out of service and replaced with the Windows 7.
I have very common problem (as i see on the forums) but I still haven't found the solution.. I have 2 computers ... the old one (with win XP installed) and brand new one (with win 7 x64 ultimate inastalled). The problem is ... on the old computer internet works fine, but on the new one i Just can't get it work. It allways says "No network access".
I have no router ... computer is wired directly to my cable modem. I tried nearly everything ... but still no succses Network card (realtek ) is integrated to my motherboard and have installed the latest driver. Here are some snapshots...
I can snapshot&attach any other window, just tell me wich one.
Currently I have an internal network (no internet access), with a few XP workstations conencted via a hub, working fine. When I added a Win 7 computer, it cannot connect to the network. It says "unidentified network" and when I run troubleshooter, result is "does not have a valid IP configuration." Note that all the XP computers are using the NetBIOS protocol; TCP/IP is not selected.
View 9 Replies View Related
