I had to format my HDD and re-instal Vista Ultimate OEM... it wont install. Gets to the final stages of install and then just never completes it. Does anyone know what I need to do to get my media centre working again?
View 9 RepliesI was just wondering if it's possible to format or atleast re-installWindows Vista on my Laptop without the CD and Serial Number? (unlessthat's the serial number under my computer,)I really want to do this, but I have no clue how-to and what's needed and such.
,
how do you format HD in Vista. I searched in HELP section. these are entries in results:
How often do I need to be concerned with formatting disks?
What do I need to do to format a hard disk?
What file system should I use?
What's a quick format?
What are partitions and volumes?
How do I create more partitions?
How do I add a new hard disk?
under 2nd entry it says something like you need to create partitions first, then format each partition, this is RETARDED.. (ah yes, nothing with Vista is simple.. as soon as I have money I will purchase Windows XP, and ditch Vista for good...) in any other OS you right-click on drive you want to format and then hit "format"
I want to reformat my computer and install Vista Ultimate 64-bit as my operating system. I'd rather not spend a couple hundred dollars to do this when I already own Vista Ultimate 32-bit. My computer came with Home Premium and I purchased a Vista Ultimate Upgrade CD (32 bit). Now what I want to know is if I buy the $30 non liscensed Vista Ultimate (64 bit) CD, can I use my Ultimate (32 bit) Activation key to activate it? This would save me around $150. I talked to the Microsoft guys via chat but we just kept going around and around and they never really answered whether or not the Ultimate 64 bit would accept my Ultimate 32 bit upgrade key.
View 8 Replies View Relatedi am having trouble installing itunes on Vista ultimate 32 bit edition. i get the following message when i click on itunessetup file: "the application has failed to start because its side-by-side configuration is incorrect.
View 2 Replies View RelatedCan Windows XP Pro be installed AFTER Vista Ultimate to create a dual boot system?
View 9 Replies View RelatedI have a multi-boot computer with Vista Ultimate x64 installed. I have an upgrade for Windows 7 Ultimate but I want to keep my Vista Ultimate x64 bootup. So I try to install a second copy of Windows Ultimate x64 so I can use that to install the Windows 7 upgrade.
When I attempt to install the second copy of Vista Ultimate x64, by booting from the Vista x64 boot CD and directing it to install itself in a separate area on my first hard drive, it starts up, says it is loading the drivers, goes to 100% on the progress bar, and just hangs there without going on. Is there any solution so that I can keep my Windows Vista x64 and still install the Windows 7 upgrade in another partition ?
I recently built a computer with a SATA hdd and a IDE disk drive. I had also bought vista ultimate 64 bit. I cannot install vista. the screen just freezes, about 20-50% through the expanding files part. when I boot the hdd up, I get the missing bootmgr thing, several times. I tried the tip by lifehacker to use the repair settings thing. I cannot seem to install vista. I even tried to make a copy of the dvd from the comp I am typing with now.
View 5 Replies View RelatedI installed Windows Vista Ultimate on several machines without incident. Yesterday I installed it onto my desktop. A Gateway that was previously running Win XP I had backed up my hard drive to an external becuase I wanted to do a clean setup. I chose those uptions as they appeared in the setup screen. The os set up fine. I then ran Windows Update. AFter everything downloaded I let the system install the 87 updates. The computer shyt down. I restaeted it and re-ran updates again. After downloading it installed about 7 more updates and shut down. Now when I turn on the machine. I get the "Splash Screen" tehn a black screen and in the top left corner it says: Booting "Windows Vista".....
That hangs for about two minutes then I get a screen that says Setup is inspecting your hardware configuration. Then a screen that says: The file ARFSPK0N could not be found Press any key to continue. I press a key and I get a Setup Failed and it just basically goes back to the beginning. I have tried installing the Original XP setup disc that came with my computer however it reads it then I get a message saying that Drive "R" could not be read and then my CD drive door opens. There is no disc in that drive as the setup disk is a DVD so it is in the DVD drive. I went into the whole setup screen and chnaged the boot order but nothing seems to work.
finally after way to much research, I bought my HP Pavillion Elite m1950f, which comes with Vista Home Premium loaded. About 3-4 months ago, I bought Ultimate Upgrade version and its been sitting idle. So, I try to upgrade today and 3/4 of the way through it says, stopped compatiability problem, restarts, rollbacks, back to square one! I run the MS compat as suggested and it finds a device issue with a driver. So I uninstall the driver, rerun the compat and NO problems, says all GREEN! Attempt 2 time to upgrade, 3/4 through, bingo same problem. Restart, rollback, comp test again, NO problems All Green! The 3rd try same thing. So here I come to the Guru's for your knowledge and wisdom!What am I missing here? Upgrade from Prem to Ultimate I would think would be a walk in the park! When I upgraded my older system from XP to Ultimate, went though first time, not even a hiccup. So can someone show me the light at the end of the tunnel.................
View 6 Replies View RelatedI bought my HP Pavillion Elite m1950f, which comes with Vista Home Premium loaded. About 3-4 months ago, I bought Ultimate Upgrade version and its been sitting idle. So, I try to upgrade today and 3/4 of the way through it says, stopped compatiability problem, restarts, rollbacks, back to square one! I run the MS compat as suggested and it finds a device issue with a driver. So I uninstall the driver, rerun the compat and NO problems, says all GREEN! Attempt 2 time to upgrade, 3/4 through, bingo same problem. Restart, rollback, comp tes again, NO problems All Green! The 3rd try same thing. So here I come to the Guru's for your knowledge and wisdom!
View 6 Replies View RelatedI have a Aspire AM5620-E5301A Acer computer. On Acer it has Windows Vista Premium Home. I bought Windows Ultimate software to put on my Acer computer. It starts to load up OK, put in the key number in than next step is. To pick custom install or upgrade install, but upgrade choice is grey out. It is disable from using the upgrade choice, I want to choose to pick. I did not purchase Windows Ultimate through Acer anytime upgrade option. It was a store bought software it was cheaper than Acer price they offer. What is the problem with installing Ultimate with Acer computer?
View 9 Replies View Relatedok so vista doesnt let me format my comp from the desktop.
i still have the recovery disk i made like 2 mins after setting up my PC.
the only problem is will the recovery disk help reinstall vista?? or will my comp just stop working completely?
apart from the above questions i also have no idea how to format my computer, i know during the boot up process its in one of the TAB, DEL OR ESC menus what what one? and once i get into it then where do i go?
I need to format my computer. I have four partitions and would like to move my o/s to a larger partition and make it my new c:. I'm running Vista business 64. I new how to do it with xp, but not sure about Vista. I could use some pointers if you have them.
View 9 Replies View RelatedI now have figured out how to format a DVD-R Disk, I only have to insert the DVD and the Autoplay box comes up and I pick burn files to disk using Windows and click on Show formatting options and select Mastered Formatting option. do the same with a DVD-R Disk, I insert the DVD-R Disk and nothing happens, the Autoplay box does not come up so I can't select the format option, I go into My Computer and click on the E: DVD DRIVE and if I go and click on format it only gives me one option to fast format the DVD disk but then it will format it (Live File Format) and I want Mastered Format, How do I format the DVD +R Disk as Mastered? Sorry for all the stupid questions but I am new to using DVD'S and am
struggling to figure this out.
I bought a used system and there is no vista install disk ,so to make things right can i buy a copy of 32 ultimate ,install it then use the new liscence and will it pick up the programs i am running ,or will i have to re-install right from scratch re-formatting etc. Xp was like ,you could run it over top of an old copy and all data and programs would come back
View 4 Replies View RelatedI was reading how to format my HP computer and it says "Disconnect all connected devices (such as the Personal Media Drive, USB drives, printer, and fax), remove media from drives, and remove any recently added internal hardware. Do not disconnect the monitor, keyboard, mouse, and power cord." Do I really need to disconnect anything I recently put into my computer to upgrade it. This step they call for seems useless?
View 5 Replies View RelatedI installed a new, second HDD. I initialized it and began formatting it on Disk Management. When I just came back after being away from the computer for a few minutes, I noticed that the whole HDD, not to mention its formatting process, had completely disappeared from Disk Management! The HDD is still physically connected, it wasn't taken away by a fairy. What caused this and how to prevent it from happening?
View 4 Replies View RelatedWhen I format a CD-RW disk which is 700MB the dialog box says that it is only 473MB in size. I am trying to copy photo's which should easily fit into 700MB but the disk is full after only half have been burnt.
View 4 Replies View RelatedI have a160GB external HD with three partitions. I took it out of a laptop (I was using it to run Windows on that laptop), formatted the 'main' partition (approx. 145GB), and installed Linux on it. The machine I was running Linux in is 'dead' now, so I want to format this 'main' partition again (in Windows), so I can use it for storage or whatever. The problem is that when I plug it into my machine running Vista, it 'sees' the 'recovery' partition (still there from when I was using it in the original laptop), but it doesn't 'see' that 'main' partition (the one I had Linux on). I went into Disk Management, and I can see all three partitions, but when I try to access that 'main' partition,it won't let me do anything with it. Right-clicking the partition brings up my options, but they're all grayed out. I realize that I can't open the partition in Windows, since it has Linux on it, but why can't I format it in Disk Management? I have no way to get into the Linux OS to try to uninstall or format it that way, since the machine is 'dead'.
How can I go ahead and format this partition?
I have a Vista Premium PC where I installed a trial version of a program,let it expire and now I bought the full version but cannot seem to get it to install since the ghost of the old trial version seems to be haunting my PC. Before I start formatting the drive (and lose all my other programs and settings) and attempt to reinstall Vista, I was wondering whether there was some easy way to wipe all traces of the trial program? I am no great tech expert, so protracted brain surgery with registry settings may not be an option for me!
View 6 Replies View RelatedWhy does Vista format CDR and CDRW disks before they can be used? Is there any way of stopping this?
View 7 Replies View RelatedI'm finding that cell formatting (eg, dates) will no longer work in Excel 2000. Whether it is an existing spreadsheet or a new one, cell formatting does not work, and all dates entered are treated as text. This applies whether the cell formatting is done before or after the date is entered. It does appear to be a Vista/Excel 2000 conflict of some sort as it did not happen until after I got Vista. And I've just opened (from a Windows XP computer on the same network) some of the offending files, and the problem does not exist.
View 5 Replies View RelatedI have an internal IDE HDD that I have put in an USB external enclosure and connected to my Dell Vista laptop. When I attempt to format the drive in Computer Management, I assign it a letter and format with NTFS. However, the result is a Healthy Partition in RAW format. When I try to attempt to reformat using quick format, sometimes it will format it again as RAW, or it will give me an error message stating that Windows cannot format the drive. Again, the HDD shows up as a Simple, Basic, Healthy(Primary Partition) with a RAW File System. I cannot access the drive and put files on it.
View 5 Replies View RelatedI wish to create a (1. floppy or 2. CD) boot disk (with support software) to allow me to initialize (partition) and format my HDD drives before I actually install Vista (am not using any IDE drives). From all the (unthinkable) problems being discussed about Vista, I wish to eliminate the possibility of Windows not recognizing nor allowing use of my new drives. Is this possible? If so, How? And if not, Why not?
View 8 Replies View RelatedI'm using Vista Home Premium on an Acer Aspire laptop, and recently I lost access to half my hard drive. I rang my manufacturers support line, and they told me how to create a new vloume using disk management. However, when i double click it, it says it needs to be formatted. After waiting a long time (twice!) for the volume to format, it reaches 100% completion and then an error message apears saying 'Windows cannot complete the format'. This happens when i try Quick Format too. Upon clicking OK, i get a further message saying 'Check to see that the disk and drive are connected properly, and make sure the disk is not read only'. The disk is certainly not read only, I can see the drive in MyComputer etc. but cannot open or explore it. In Properties, it says the volume is 0 bytes big! And it should be 50GB.
View 6 Replies View RelatedIfsIHA.5472@TK2MSFTNGP06.phx.gbl>I have a Vista Premium PC where I installed a trial version of a program, let it expire and now I bought the full version but cannot seem to get it to install since the ghost of the old trial version seems to be haunting my PC.
Before I start formatting the drive (and lose all my other programs and settings) and attempt to reinstall Vista, I was wondering whether there was some easy way to wipe all traces of the trial program? I am no great tech expert, so protracted brain surgery with registry settings may not be an option for me!
I was wondering, since a system restore is basically restoring your system to a state it was at before, does it have anything to do with files you have deleted/moved etc. (will a system restore undo file deletions?), or does it have only to do with things like the registry? (restoring key entries in the registry) What does it have to do with and not to do with? Secondly let's say you purchased a dell, it's going to be at factory condition, meaning it has windows and a bunch of other stuff on it. You install a fresh copy of windows via a windows cd, thereby deleting every driver and utility on there and have only a seemingly useless thing.
1. Will a system restore bring your computer back to factory condition? (the way it was when you bought it)
2. I also guess you can do a system restore if and only if you have a system restore point. How do you make one and how can you tell you've made one before? (in other words how can you tell you made one at a certain point and how it is like? Or, if someone else made one for you, how can you check this and what the restore point is like?)
Am trying to move some things to a CD-R disc, but nothing comes on screen for formatting when I insert new, clean CD into Dr. E. What am I doing wrong?
View 2 Replies View RelatedI've used this forum A LOT to find answers to the many problems I've had with my pc - now I have one that I can't find a solution for, so here I am posting! I'm trying to format a new Seagate Barracuda 1.5TB hdd but it won't go any further than 73%. Computer Management tells me that its still formatting (i.e. NO error message) but its been there for hours. I've tried formatting from the Vista installation cd during boot but it plain refused (I forget the error message), it won't even do a quick format in Computer Management. Is my drive humped?
View 9 Replies View Relatedi wan't to install another OS in my newly created partition in my Vista. but im not sure which to select in formatting: primary or local? i prevously selected local. can i still change that if i reformat it again? im all set and that's the only thing i wanna know to have a flawless installation.
View 9 Replies View Related