I have Vista x64 and a HP DeskJet 820Cxi. Vista x64 has the driver for the printer in his database. I installed the driver and used the printer. But the printer only pulls the paper to the paper beginning in the printer. And nothing else happens. Thats all with the printer.
View 8 Replies
First you'd have to activate your roll of toilet paper. Then you'd need to validated it. Of course the license will state that you can only use your roll of toilet paper on the first ass it was used on. If your roll of toilet paper was installed on an older toilet paper dispenser, it won't work, or work so slow that you have to sh*t again by the time you've pulled out enough toilet paper.
The toilet paper would of course be full of bugs and nonfunctional for a lot of people until the first Service Pack, that is if they can install it at all because there are no drivers for your older TP dispensers. But of course, because the original installation is so screwed up, SP1 will fail, and they just have an unusable roll of TP.
So MS would make a easy thing into a chore, and many users will just switch to using a shower to wipe their ass, as that is now easier, or they'll want to install the old XP version of TP that works both faster and easier.On the bright side, public restrooms could be converted in bath houses for Republicans & Fundamentalist Christians.
We got a new computer yesterday and so far not bad as far as setting up. The only problem I'm having which is taking hours to work on is that I use Incredimail. On my old computer, XP as with Vista we each have our own desktop (5 in the family) and we each have our own email account with charter, our high speed internet provider, With Incredimail it's just a service I guess the best way to describe it. It pulls the emails off charter and gives it to us by sync up. I don't know if I'm using the right terminology but hopefully you get the idea.
I went to Incredimail and downloaded from their site and we each have our own icons. On mine, it 's pretty much fine, I can get it and receive and send emails but the other 4 users cannot. I get this message all the time. Incredimail installtion is not complete you must reboot your computer before using Incredimail. I've rebooted at least half dozen times and at least 3 times I've unistalled and reinstalled the program.
I've called charter and spoke with a young man who says he just got Vista and he had some of the same problems (not necessarily with Incredimail) but only the administrator can use the programs and not any other users. My question is how can I get this program to work with all users? This is what I've tried.. I've tried to set them all as administrators and that only makes them get my emails not theirs. I've gone to control panel and users accounts to turn User Acct Control off.
I have a new printer that prints 13x19 inch photos. I would like to buy some
plain non-photo paper to practice with before I use the actual photo paper.
I can't find any plain paper in that size at my computer or office stores.
On my elderly friends' computer, when they go to "page setup" in WordPad that came with Vista, the only two options there are "4X6" and "automatic". This narrows the printable area a lot. The margins will not adjust. They asked me if I can fix it, I said I was not sure, need to ask around. Sounds like a registry problem. Is there a fix? What needs to be done? This is the first time they tried to use Word Pad, and no restore points to go back to, would not know where to go back to anyway or when the problem started. It's a Christmas gift PC.
View 5 Replies View RelatedThis is something that has kind of annoyed me for a while now and can't figure out how to fix. When I manually change the default program for a file type, like I have set my PDFs to open with eCopy Desktop, the icon for each PDF shows up as a paper icon with the eCopy icon contained within. It should just show the eCopy icon. I have noticed this whenever I change the default program for a file type. Is there anyway to get these to show the application icon only, not contained within a paper icon?
View 4 Replies View RelatedThe paper clip ikon shows when there is not any attachment. I understand that this is caused by using AVG Free to scan the incoming e-mail. Does anyone know if I upgrade to the full paid version of AVG will this be corrected? I have Vista 64 home premium and explorer for e-mail.
View 6 Replies View RelatedCould anyone tell me why some of my desk top and menu icons have changed from the originals to just blank pieces of paper? Only some of my icons have changed such as my Internet Explorer, Firefox, Microsoft Office, Adobe Photoshop, etc. but not all. I have tried to change the icons through the properties menu but do not see the original icon available as an option and could not locate it in the system files anywhere. I have researched somewhat online and found threads in other forums that indicate the IconCache.db needs to be either deleted or rebuilt but at the same time found comments to both fixes that say neither one really works.
I did try to follow one of these instructions just to see if I could locate this cache file but could not find it in my UserAppDataLocal file they indicate it should be in. I am far from being a computer tech type so I've been unable to figure this out and apparently need some expert assistance! Does anyone know of an easy fix to my problem that does work?
I am using an Epson Lq-300+ dot matrix printer in Windows Vista. I am trying to print bills sized 12in by 6in. I added the custom paper size in the print server and it is saved correctly, however, when I try to print, the print properties dialog does not show the paper size. In fact, there are many paper sizes in the print manager that do not show up in the list of available paper sizes.
View 5 Replies View RelatedI am running Windows Vista Home premium 64bit with 8gb ram and an hp c309a printer. My problem is that vista take a long time to print even just a 1 word paper using notepad. Also when i right click the printer in the printer folder it also take time to open the properties, aprox 3 minutes. So if i try to print it takes 3 minutes just to open the tab to click print and to select the printer i wish to use. The c309a is connected by usb cable, and i have tried re-installing the latest drivers and firmware for the printer as well as different usb cables and each of my usb ports. Yet for some reason there is a long 3+ minute pause when trying to print. I have also tried using the network feature and I still have same trouble. Also i have checked to make sure print spooling is on in services. HP has a utility to check for issues for both network and for usb, and the printer passes each test fine. I have done so many full uninstalls and installing of the software as well as the cable changes it is driving me nuts. I have been google'ing for days and days and have had no luck in fixing this issue. One last comment every time i try to print the applications I am using freeze for the 3+ minutes and the window application shows "application not responding", but after 3+ minutes i can finally select the printer and hit print, then at that point it freezes again for about 2 minutes and then prints. I have run multiple virus scans and multiple spyware detection programs and have also run online virus scans using bitdefend and trendmicro as well and i have no virus or spyware. I have also ran "hijackThis" and been told my system appears clean.
View 9 Replies View RelatedI deal with megatons of PDF docs e.g. datahseets, manuals, etc. It's mostly text. As I've been doing computers for decades & health is my priority, not something in "background" I have SUPER healthy environment such as all-black background, silver-colored fonts, no distractions/graphics, brightness at zero, contrast at comfortably low setting which is in hardware + nVidia videodriver, my graphics is 512MB nVidia GeForceMobile. It's too long to explain but everything is as good as it gets.
The bright ideas don't arrive into your head in the office, in bright light while a bunch of people swarm around, you can hear peeing in the toilet, PHONES, etc. I use earplugs 34NRR rating, blue things that far exceed so-called noise reduction headphones (which are a ripoff).
Do you kno whwere bright ideas get born? In a park, woods, the bench, MY CAR - the best, I sit alone in total silence, no cellphones, no dorks of my neighborhood - I just drive out to s State/National Park and that's where I work on complex problems. I need all these PDF's with me. Printing is not an option you obviously understand. One Datasheet for Microchip PIC18F4420 is 421 pages, and I need like a dozen of things of this sort with me.
I?m trying to install a network printer on a Vista machine. Vista is able to locate the printer on the network but when I select it for installation, for some time, Vista tries to connect and then pops up this message: "Failed Connecting to Printer - Access Denied" And then another window pops up with this message: "Spooler Subsystem Application stopped woring and has been closed." In fact the spooler service always stops, so I have to restart it on the services windows, within Administrative Tools of the Control Panel. The machine is new and has been installed yesterday. Everything else works fine. The printer I am trying to install is on a Windows XP Professional machine within the same network (naturally).
View 9 Replies View RelatedI have a Dell PC with XP Home and a Dell A960 Printer attached to it. I also have a new HP Laptop with Vista premium that has also had the same printer attached to it at times so the drivers are installed on HP laptop. I recently installed a router so I can use laptop wirelessly. That works fine. However, I am unable to print to the host printer wirelessly. I get message saying printer cannot communicate with computer. I tried everything I found on Google searches. I have enabled printer sharing on both. Do I have to make the Workgroup names the same and if so do I change the Dell with XP or the HP with Vista? I changed the Dell once to no avail so I changed back. Do computer names have to be same? I am a novice at networking.
View 6 Replies View RelatedDose anyone knows if they make a printer cable: I received a new lab top and it didn't come with the older printer jack on the computer. I guess I need to use one of the usb ports? My Epson 660 still works I hate the idea of getting a new printer when my old one works.
View 4 Replies View RelatedJust installed Vista SP2. Everything seems to work OK except for my Dell 1720 printer. It now prints an extra page before the actual document to be printed. There are just a few spurious characters printed at the top of this unwanted page. The following "proper" pages are OK. I have, so it seems, the lastest driver available.
View 7 Replies View RelatedI cannot set the default printer in Vista Business with SP1. I am connected to a domain trying to set a network printer hosted from a server as the default printer. I have seen a dozen or more questions similiar to this in this group as well as on other forums and found no answer. I see a MS-MVP come on and tell people to remove local printers such as the XPS and adobe printers. This is a ridiculous solution. Sure it may allow you to connect to a network printer but you have removed printers that you are going to need to use again. Unacceptable.
So far the only other solution that does not include deleting all the local printers off of the machine is to make sure you have write permissions to the default printer registry key. I have checked this and I do have write permissions(Full Control). SO WHAT NEXT? IS MICROSOFT EVER GOING TO COME OUT WITH ANOTHER FIX FOR THIS?
i have installed a printer from my main pc which uses xp pro to my new vista lap top ----- it shows the icon for the printer in the tray but i cannot still print any thing
View 7 Replies View RelatedI just upgraded my XP home edition to Vista home premium with an upgrade disk provided by Dell. Before the upgrade I uninstalled my HP 2575 printer and software because it was listed as a compatibility issue. After upgrade I reinstalled new software from HP for my printer from the HP website. I plugged in the USB cable from my printer. Vista recognized the new device but would not put it in the printer folder in the control panel. Vista did find driver software online but could not install it. The HP solution center tells me no HP devices have been detected. When I try to print I get a message that I don’t have a printer hooked up. That’s the back ground here is what I have done.
I have updated Vista; most were successful some security ones failed. I have Service pack 1 I uninstalled and reinstalled HP software many times I started my spooler and reinstalled printer and software many times. I checked Task Manager and the hpqste08 services are running. I uninstalled virus protection and turned off the firewall. I have done everything I can find at HP, Microsoft and here. I tried to reload Vista but got a Worker Thread Returned at Bad IRQL error message so I stopped reload.
The one odd thing I did find was in the Device Manager. In the Device Manager the HP 2575 is listed twice. Once under IEEE 1284.4 compatible printer and once under Other Devices. When I click on the one under IEEE 1284.4 compatible printer and update driver software it finds the driver and says it’s up to date. When I do the same on the one under Other Devices, windows finds the software for this device but encountered an error when trying to install it. It does this when looking online and when looking in C: drive.The printer still does not show up in the printer folder in the control panel.
I have a Vista Home Premium Laptop, an XP Home laptop and an XP Home desktop (and an XBox 360) connected to my Linksys wireless G router and an XP Home desktop connected via CAT5 to the same router. All connect to the internet fine. The XP laptop finds and uses the printer on the desktop fine. I had setup a share of the Canon I560 printer, connected to my XP desktop, on the Vista laptop and it worked fine. I don't believe I made any changes, but now it won't find the printer and I can't seem to install a new copy.
The Vista machine will not detect the printer and won't even find the XP desktop or laptop on the network. The XP machines find each other fine. All machines get their IP address from the router via DHCP. All are in the same workgroup, or it seems so. Strangely the Vista machine shows WORKGROUP and the XP machines show Workgroup, even if I type the name in caps, XP still shows Workgroup and Vista WORKGROUP.............
I have a Vista Desktop that has a wireless router. I have shared a printer, but I would like my Mac laptop to be able to print to it. Do I install the printer driver on the Mac or on the Vista machine? If I install on the Vista machine, is there a special installer? The printer is an HP DeskJet 2445.
View 4 Replies View RelatedI have a HP Color Laser Jet 3600n already installed on the company network. I just got a new gateway with Windows Vista Home Premium 32bit. When i go to the printer wizard it locates the 3600 printer on the network. Then it asks me to choose the printer software from a list. or choose a disk. I don't have the disk. So, looking through this list, it doesn't even have the HP Color Laser Jet 3600 in there. it's got a 3000 and then jumps to 7000.
View 9 Replies View Relatedi have a printer on my old windows xp computer. but i went to hook it up to my vista, obviously the printer is not compatible which sucks. so is there a way i can connect it through a network? i have no idea where to start or what to do first.
View 4 Replies View RelatedI'm trying to install my Printer Driver for Canon Pixma printer. When I run the executable to install the driver, it come back with "Printer Spooler is not running, Restart Printer Spooler. So I re-start Printer Spooler under Admin. Tools. Then I try to run the executable again. And again the Printer Spooler is stopped. It seems the executable stops the Printer Spooler?
View 5 Replies View RelatedProblem:
1) Extremely slow shared printer response
2) application nonresponsive while printing
Network Topography:
1 Vista Home Premium 32 PC
1 Vista Home Premium 64 PC
Cisco SD2008 Switch
1 HP 4050 Laserjet (Parallel connected to Vista 32 Machine above)
Configuration of Printer:
Connected via parallel to Vista 32 machine
Printer is configured for sharing and is installed on both machines
test pages print successfully from both machines
Additional notes:
During printer setup on the Vista 32 machine, I attempted to install
additional 64x drivers, but could not locate them, so I skipped this step.
During printer setup on the Vista 64 machine, the shared printers were
identified successfully, and I added the network printer. I was not asked to
install drivers the way I have in the past when adding a local printer.
Printing using the shared printer on the local machine Vista 32 performs
with normal speeds. Printing from the network computer Vista 64 using the
shared printer installed on Vista 32 is extremely slow. Even typing in print
job changes in the print dialog window takes 30 seconds or so for each key
stroke to register a response onscreen.
I have a new laptop with windows vista and my desktop has XP on my desktop is a printer installed and with my old laptop i could print with that printer. Now I'm trying to get this to work with my new laptop but it doesn't work. On the desktop I have enabled sharing the printer and both computers are in the same workgroup and if i get the vista to detect the printer via the setup of "add printer" it will find it but when i try and
connect it it says "can not connect, acces denied" I've tried some things but
it didn't help. I've installed the driver of the printer and i can still print with my
old laptop.
I am involved with out U3A (Educational charity for retired people) we bought our membership secretary a new Vista computer when her XP system died and of course her old Dell all in one wont work. Does any one have details of a working all in one (printer / scanner fax not essential) which worked "straight out of the box" or with minimum driver download. I have searched the web without much sucess
View 7 Replies View RelatedI have added hp printer deskjet 5850 to vista hame as a 5600 (as told on hp website) It printed. then I added a laserjet 2100 via a parallel to usb. This works fine but the 5850 has stopped working. I tried plugging into a different usb port which has just clogged up the port but not got the printer working.
View 4 Replies View RelatedI have a PC running Vista Ultimate x64. Attached to that PC (via USB) is a HP Photosmart C3180. My wife's laptop is running XP Professional x86. I am trying to allow her to print to the printer attached to my Vista x64 PC. I install the printer properly and confirm it working on my Vista x64 PC. I then share it out under the name HPC3180. I disable password protected sharing and under the security settings of the printer I give "Anonymous Logon" permission to access the printer.
I know generally I would have to specify the x86 version of the driver under the "Additional Drivers" area in the properties of the printer; but in this case I do not know where to get the .INF files. I can download the drivers for the 32 bit version of XP from HP's site, but they aren't self extracting EXE files so I cannot get the INF file out of them to use. I even tried setting it up (on XP x86 laptop) as a "Local Printer" with a "Local Port" that points the printer. I then tried to use a variety of older and generic drivers. At worst it refused to print entirely. At best I got some sort of seemingly random output from the printer.
old computer newbie has desktop with xp hardwire connected and new laptop with vista wireless connected. printed is hardwire connected to old computer. so far I can only create a network showing new laptop and the new router installed between the old external modem and old computer. I really want to be able to use old printer from my new laptop.
View 9 Replies View RelatedUsing HP psc 2510, linksys wrt54g router, and Toshiba laptop with Vista os.Everything is great for a few days, then the printer will not work.Looking at control panel, printers, I see the printer is offline.How do I get it back online? The blue light is on, but it will not print network config page.I have to reset the router and reinstall the printer to get it working again.
View 9 Replies View RelatedI cannot get my 64 bit vista machine to connect to a printer connected to my 32 bit XP machine. I have read all kinds of advice on various forums and the microsoft support site but nothing seems to work. Both computers have been networked for some time, I am able to share files and folders, both computers see the other in their network folder. I have pinged the printer, the other computer back and forth and everything is OK. I can see the network printer connected to the host computer but when I try to connect, I get the message that the server does not have the correct driver(s) installed. The printer prints fine from the XP machine.
When I tried to install the drivers on the Vista machine I was told by HP that they do not have a full version of the drivers for my 64 bit macnhine but could only provide basic drivers which I downloaded and installed. I have tried creating a new port with the host computer name and printer name but all I get is the network path cannot be found. I have followed some of the suggestions for similiar problems on this site where people have had success but those ideas just don't work. The printer is a HP Photosmart 7960 which I have had for several years. Right now I am at my wits end and ready to go back and start over, maybe I missed something minor.
