Loses IP Config When Undocking
Aug 12, 2008
used to use ThinkVantage's Access Connections to manage my network connection profiles on my Thinkpad. I just recently uninstalled it because I decided to just rely on the Vista has natively.
Since our office requires static IP, I set that up at the LAN properties.
Everything works fine when I start from a clean boot. It's when I undock and redock to the docking station that problem starts.
I lose the static IP configuration. Instead Vista assigns:
IP: 169.254.77.37 (supposed to be 10.11.2.xxx)
Subnet: 255.255.0.0 (supposed to be 255.255.254.0)
Gateway: blank
DNS: correct
I now find myself having to do a reboot everytime I just need to undock and go to a 30 minute meeting when I used to be able to undock and redock without any problems whatsoever.
View 9 Replies
ADVERTISEMENT
Apr 25, 2008
Every time I open outlook it goes to confifuring and half way through say an install is in progress , config runs then says I have to reboot, which I do the next time I open outlook it runs through the same proccess. What has gone wrong I upgraded to office 2007 from 2003.
View 4 Replies
View Related
Nov 30, 2008
How do you turn off mobsync it makes my pc lose smoth performance. And tryed offline files and it still comes on. As in XP you had wireless zero config and turned it off and make my games not lag. But in vista it shuts down your internet when you shut it off. I want to stop the lag spikes while i play games.
And yes i know wireless isent for gaming but we have a dosen pc's here and dont have a finance to have cords all over the place it's a 2 story home with 8 pc's and 4 laptops so i just want a way to stop the wireless from resetting every 60 seconds. Make it every 6 hours if i can.
View 5 Replies
View Related
Jan 11, 2009
I'm a bit of a luddite but i've been trying to get less services to start when i start my computer and thus Vista, and have inadvertantly now turned off my audio services (remarkably, even after turning off loads of other things, this seems to be the only thing that has changed). I can't tell from my active services list (after doing msconfig) which one is affecting my audio. I've made sure the obvious ones are still ticked, of course. Is there anyone who could give me an idea of which one should be ticked in order for the audio service to come back on? I'm loathe to start them all back up again to try and find out...
View 4 Replies
View Related
Feb 16, 2009
The Task Manager shows CPU Usage of around 50%. No apps is being up. The Start Up apps on MS Config are all turned off. Icons shown on the System Tray are speaker, network, AV and IME. The CPU usage of around 50% does not appear any transient phenomina which may be caused by app software automatically running in the background. I have just run AV for full scan but no virus, worm or spyware detected.(AV is Symantec Endpoint Protection 11).
The PC is a dual CPU system running Vista Ultimage SP2b and thus the Task Manager displays two CPU Usage Histories. One of them shows about 30% and other one shows about 75%. The Processes on the Task Manager shows System Idle Process 80% to 97% but the CPU Usage on the status bar shows around 47% to 60%. I think the CPU Usage under the above described condition should be 0 to 3%. I wonder what the problem is. Could anyone shed light on this?
View 5 Replies
View Related
Aug 24, 2008
my freind advised me to come here with my problem before i phoned the manufacturer to see. basicaly iv had my laptop for 2 months now so its rather new running Vista home edition, im having troubles when the Ac/DC cable is plugged in the light on the front flashes saying it is charging but it still loses power at a fast rate. it also wont start charging unless i fiddle with the power cable for 5-10 mins. i know it cant be the cable itself coz i bought a new charger.
View 7 Replies
View Related
Apr 29, 2008
I am having a problem with windows ultimate and the windows fax utility. The windows fax software is is not using my location IE dial 9 for outside line, I can get it to work manually but it will not default to the dial 9 option.
View 5 Replies
View Related
Aug 21, 2009
I'm considering a motherboards swap on my current computer and do not want to reformat and reinstall vista home premium 32bit(oem) plus all my programs. I currently have a G-B p35-ds4 board and would swap to a gb p45 ds4 board. I intend to keep cpu,hdds, gpu and ram all the same and i only have sata drives (no ide drives). I am asking advice on wheather it will work fine due to the simular chipsets, and what i would need to uninstall so that it transitions to the new hardware config smoothly and what errors I can expect to pop up.
View 6 Replies
View Related
Sep 29, 2009
When a Vista computer comes on the LAN, our DNS server has to look to the IP address: 4.2.2.2 (forwarding) for a name server. Is this because the number of computers that are powered-on, changes? It seems that Vista is trying to take priority over DNS.
View 5 Replies
View Related
Jun 5, 2008
Running Vista Enterprise x86 SP1 with all updates applied as per Windows Update. Machine is a HP 6910p with Intel Wifi Link 4965AGN. All power saving disabled where possible; power management running max performance. Router is Linksys WRT54GS v2 with latest firmware from Linksys installed. SSID broadcast disabled. Connecting using WPA-2 personal, AES encryption. Have a few other notebooks (Tosh, HP, Dell) and all work without problems but they are all running XP. This current problematic notebook runs fine if I boot to XP.
Problem: with no discernable pattern, the Wifi connection would be lost and cannot reconnect even though the network is visible (shows up as unnamed). Tried IPConfig renew, right-click diagnose & repair, disable/reenable (from network setting and soft-button on notebook) and reboot. Nothing helps.
Simple solution: click on the network and provide the correct SSID and Passphrase, all is well again. Of course, each time I do this, it's a new Wifi network registration so I end up with 6-10 every week that I need to clean up (mywifinet, mywifinet 2, mywifinet 2 3, mywifinet 2 3 5, etc...). They're all connected to the same thing but everytime it dies, the same setting will not reconnect and I have to register all over again. Registration is standard and set to remember and auto connect. This isn't my only problem with Vista but it is the most annoying. Why, why, why does Vista hate me?
View 4 Replies
View Related
Oct 7, 2009
A friend had issues with his laptop, the system (Vista Home Premium)came with lots of preinstalled acer software, he had tried getting rid of them but had no luck, anyhow, he ended up turning off all the startup programs in system config, upon rebooting, he had the error no os found, i have since managed to get passed htis, however i cannot get any further.
The HD is recognised in Bios. The repair from a disc was completed Now it will boot into windows but nothing, no user, no task bar, nothing just an arrow on the screen with a background. I have tried removing memory and starting up repair for a second time bootsect via cmd nothing, i cant boot into safe mode, it just loops back to normal boot, it has no restore points.
I only have vista basic and vista business discs, and he does not have a disc, it came with a partition, i have tried recovery but it tells me there is not backup, yet i can get the task manager up and into cmd, this shows me all the files, so i know there is no issue there. I am assuming that the boot file in boot.ini is up the duff. Is there any way i can get this thing to boot up with his user and all back to normal?
View 9 Replies
View Related
Mar 23, 2008
I have a Vista laptop with Home Basic. My other 3 XP laptops can connect to my wireless network ok. I use a Vigor 2600 with firmware v1.06.7.04.2 with wpa/psk 64 bit, mac enabled and hidden ssid. On my Vista laptop from the control panel, network & sharing centre, if i select connect to a network, the following shows; Unamed network - security enabled (there are no other networks round about me). If I select"manage networks" I can see my own named network. I cannot conect to this unless i remove my encrtptionand as numerous forums have reported Vista does not offer PSK when manually configuring a wireless network.
View 4 Replies
View Related
Oct 12, 2008
I have a laptop running Vista Home Premium 32 bit. It's fairly new (~1 month) and has pretty much had this issue since day 1. If you leave the laptop idle for a "fairly long" period of time, it will lose connectivity to other machines on the local network. It will do it frequently overnight, but not always, so it's hard to pinpoint when/how long.
Here are the symptoms:
-Mapped drives still show up in explorer, but if you click on one, it hangs FOREVER. I have let it try to connect for several hours and it never gets through
-Using UNC gives the same result
-I can still ping other machines on my local network
-I can still access the internet
-Disabling/enabling the network connection does not help
-Once the issue starts, Windows explorer can not be shut down. You can task-manager-> end process all day and it will not die.
-Once the issue starts, Windows can not be shut down. It will hang on the "logging off" screen for literally hours. The only way to recover from this is to do a hard power down by holding the power button for 10 seconds or so.
View 4 Replies
View Related
Mar 23, 2008
I have a Viewsonic LCD monitor. i just put a new pc together with an XFXForce 8600GT video card. The problem is when i boot the pc i see the bios screen fine. it's not until i see 'Micrsoft Corporation' and am about to see the status bar going back and forth that the screen goes blank and i then see 'No sginal'. I'm connected using a DVI-I cable. If i unplug the cable from either the card or monitor and plug it back in i then get video. I sent the monitor to Viewsonic which they said they fixed a problem. hmmm anyway i'm still seeing this proble. If i use a VGA cable with a DVI adapter i won't have this problem. While the LCD monitor was away i used an old CRT monitor with a VGA cable and had no problem.
View 9 Replies
View Related
May 31, 2008
I have been troubleshooting this problem for about a week with no success. I have a Westell DSL modem with a static IP from ATT running in bridged mode to a D-Link DGL-4100 Router running in PPoE mode into a Netgear JGS-524 24 port switch. Connected to the 24 port switch are 3 XBOX 360's and 5 PC's. Four PC's are running Vista 64 Ultimate and one is running Vista Home 32 bit. All PC's and XBOX 360 units have Static IP's.
Many times a day my network loses the internet connection at all 360 units and all PC's. When I diagnose the Vista Network connection it says cannot find the DNS server and mentions this is a problem Vista cannot repair. All settings are entered manually on all equipment including the DNS settings. If I go into the D-Link router settings and look at the status it shows a working internet connection.
To get the internet working again, I disconnect the internet connection through the router settings, wait a few seconds, then reconnect to the internet. Once it shows connected I go back and Diagnose the network connection in Vista again. This time it will not say cannot find DNS server, It will now say no problem found and give me the option to reset the network connection. Once I reset the network connection, I will get my internet back.......
View 9 Replies
View Related
Mar 23, 2008
Has anybody encountered a problem where when you click send/recieve, Mail informs you that it is downloading x of x mails but the mails never appear in the Inbox? The problem does not happen all the time. I have check all the usual things like spam filters etc, but I still have this annoying problem!
View 7 Replies
View Related
Mar 1, 2009
my apologies for not using the quote on my prior message of "Have a new laptop with vista home premium 64bit can not stay logged in to remote dektop at workplace running vista business (?32 or 64?) lose connection
in 1 to 5 minutes". I tried to use the quote button nd it sid my message was to short I tried to add text and the quote button when pushed threw out a pop up that said message to short even with added text
View 5 Replies
View Related
Jun 21, 2009
Recently had reason to return my PC to the store because it would not post. After weeks the store said it was a RAM failure. I had 4 GB of Ram installed. Eventually I got my PC returned and they had put 5 MB of RAM in .... The problem is my PC can only see 2 GB of physical memory. I have now got three 1 GB and one 2 GB of ram installed. My PC is preforming worse than ever. I am stating to think my PC can only see or should i say use the 2 GB bar for some reason. I have even tried to change the system config but it will only allow me to select 2048 mb.
View 9 Replies
View Related
Jun 9, 2008
i'm trying to play a game (which i think is 16bit) i downloaded but it keeps coming up with an error message telling me that i'm missing the C:WINDOWSSYSTEM32CONFIG.NT file. i have looked up ways to fix this, but can only find solutions for Windows XP, & when i found a solution here from a user called Josh, he claimed there is an HKLM pathway in regedit but i don't see this my system is Windows Vista Home Premium 32bit.
View 8 Replies
View Related
Oct 11, 2009
When connected to a pptp VPN resources on the local domain are inconsistantly available. Previously with XP they were always available even if connected to a VPN. What has changed?
Printing:
From win 7, I can print to a Lan printer shared on the server (2008) Once connected to a remote VPN (windows 2003 pptp), the print que says "Accessed Denied" when trying to print to the same printer. With XP printing was still possible to the Lan even though connected to a VPN.
Mapped Drives:
Sometime they work, sometimes they don't. If I have a mapped drive to a local file server once connected to the VPN I can't list the contents of drive, or access any of the files.Other times even with a VPN connected I can acess the files. If you access the drive before opening the VPN this seems to help. I thought it may be a DNS issue but I have added the server to my hosts file. The host name resolves correctly even after an "ipconfig /flushdns".
Does windows 7 need to resolve service records on the local AD dns server before passing on credentials? The order of accessing DNS servers is the remote VPN DNS server first and then the local DNS server second. Is this why I can always print to a local printer that I installed using its IP address, whilst connected to a VPN, which then prompted me for credentials. I assume the credentials were stored locally, making them always available no matter what the order of DNS servers were.
Once connected to a VPN why can't Vista/Win7 always print/access local resources?
Connected to the same VPNs XP could always access local recources.
View 7 Replies
View Related
Sep 14, 2009
I have a Vista and XP LAN. The problem is when I open the network screen from the start menu it sometimes shows my XP machine and sometimes it doesn't. any ideas?
View 5 Replies
View Related
