Configuring Updates, Recieved Black Screen

May 22, 2008

I just recently purchased a new game, and it said it would help the game's performance to install Vista Service Pack 1. While doing this, at the end of configuring updates, I recieved a black screen and "0xc0190036" with some message like keyboard. after it. It never changed from this screen. From different websites online, I read my best bet is to reinstall Vista. I have an Acer computer, and I am not positive that I recieved a back-up CD with my purchase. If I did, it must be lost, as my house is organized like an OCD freak would do. I was able to find XP OS disk, and quickly put that in, only to soon realize this was a Dell OS. This basically was a whole bunch of fail, and now it seems my only option is to boot "CD-ROM" with the Vista CD which I do not have in there...

View 6 Replies


ADVERTISEMENT

Windows Screen Says 'Configuring Updates: Stage 3 Of 3. 0% Complete'

Mar 23, 2008

I have a Dell laptop with Vista Home Premium installed. Everything was going fine today until I clicked for updates to be installed and then to re-start after the updates, as normal. However, now when I start the computer the Windows screen says 'Configuring Updates: Stage 3 of 3. 0% complete' then it shuts down and automatically restarts with the same message. This has been going on for hours and I cannot get into Windows or do anything else. Is this a virus?

View 7 Replies View Related

Black Screen Of Death: (no Updates Or Installations)

Sep 23, 2009

So I've read so many pages all around the web about this problem, with no explainable reason (no updates or installations) I booted up yesterday to find that after login my desktop was black with only my cursor visible. I wait some 5 or 6 minutes and the desktop appears but explorer.exe is slower than slow and takes the same amount of time to action any click. Painstakingly, I went through msconfig and disabled everything, one by one I re-enabled each item, rebooted and tested the results. Rinse and repeat for every process. All worked fine until I came across 'Shell Hardware Detect'. If this process is enabled then I get the error described above.

So a cursory search around the web doesn't seem to yield many resolutions to this problem. I only seem to be able to find similar issues on Win XP SP2 - however i'm running Vista Premium X64 SP2. I'm angling towards SP2 as ever since I installed it I've noticed a few bugs. Typically, searching on Microsoft's support website the term Shell Hardware Detection yields nothing whatsoever. Anyone have any ideas how I can get this process functioning properly again?

View 4 Replies View Related

Configuring Updates-3 Of 3

May 4, 2009

I am having trouble with my windows updates. Updates history shows that all updates have successfully been installed. However, when I turn on and off my computer, I get a screen "configuring updates - 3 of 3". The computer takes ages to start or turn off....

View 7 Replies View Related

How Stop Configuring Updates

Nov 6, 2009

how to stop configuring updates because i am tired of my stupid anti virus saying that the program is broken after each update and when the update happens it stays at 3of3 0% then i have to go to safe mode restart computer then it doesent do the updates which i am tired of this..and i do not have the disk of the vista it came with my computer when i bought it.

View 7 Replies View Related

Configuring Windows Updates

Jul 15, 2009

I received 4 updates today and all 4 installed however one update KB961371 showed error 800703F9. While configuring updates it would show Stage 1 of 3-0%complete. Then it would show updates not configured propertly. I tried this several time, same results. I did a system restore and then tried installing only the security update, same results. After this I reinstalled the other 3 update with no problem. This is the first time I have had a update not to install. I am using AVG Internet Security 8.5 version, however I don't think this is the problem as I have received over 130 windows updates inthe past. I do have windows set to install updates automatically every day. I have contacted MS with this information but have not received a answer. To tell the truth I trust the forum more. I look up some information and this update applies to 2008 windows server Itanium-based system. I have a HP Pavilion s3120n with AMD 64 live processor.

View 4 Replies View Related

Configuring Updates On Startup

Mar 23, 2008

everytime I start my pc i says vista keeps saying configuring updates and i'm not online right now so how can it update i'm useing a friends pc to type this.

View 4 Replies View Related

Gets To 'configuring Updates Stage 3 Of 3' And FREEZES At 0%

Mar 23, 2008

Sure enough, after waiting impatiently for months, I tried to install SP1 today and it was a disaster.

1) It gets to 'configuring updates stage 3 of 3' and FREEZES at 0%.
2)This forces reboot, same freeze.
3) So I reboot in safe mode, and it resumes installation of stage 3
and gets to 98% - whoo - hoo!
4) And then, after two hours of this, it says 'Service Pack could not
install; reverting changes'
5) Back to square 1, an entire evening wasted.

Damn you, Microsoft. I'm running a simple laptop, nothing special. I disabled the firewall, the antivirus, antispyware, and network before trying to install SP1. Nothing. NADA. How long do you idiots have to work on this thing to get it to succeed on any simple laptop? Years? Decades? Other people are reporting similar problems. Are you gonna respond? Or are you gonna just *&%$ up my machine permanently when you FORCE this stinking, bug-ridden service pack onto it in a few weeks time? And then who do I sue?

View 9 Replies View Related

Updates For Ultimate 32 Bit Not Configuring Properly

Oct 9, 2009

I am running a triple boot system and have just completed installing XP, all updates, and applications. Now I am in the midst of getting Vista Ultimate installed but initally was getting a Code 52 error, when I installed Office 2007 the error disappeared and I was able to update Vista and Office with the exception of these three update which would initally say they were downloaded and installed and then on the reboot configuring after rebooting it would say that these updates were not configured properly and would revert them. I have tried to download them earliest to lastest still same problem occuring. Have deleted all temp files and cookies still nothing.

These are the three update that will not configure correctly. A software update is available for the Windows Vista installation components A June 2008 update is available for the Windows Vista Customer Experience Improvement Program (CEIP) An October 2008 update is available for the Windows Vista Customer Experience Improvement Program (CEIP)

View 4 Replies View Related

Updates Configuring 3 Of 3 - 0% // Then Shutdown" And Repeat

Apr 5, 2009

First of all I would like to say I love this forum if it wasn't for this forum my Desktop/HDtv(as my monitor) would have a keyboard stuck in it. Why you might ask, well I was stuck on "Updates Configuring 3 of 3 - 0% // then Shutdown" and repeat. Also I'm a new Vista owner and so far its been shaky but I plan on over coming it. NOW!, To why I'm here, I keep my desktop empty and use the Dell Dock (Mac style Dock that came with my Dell). I cleaned out and disabled most of the stuff on the startup I don't need. So the problem I'm having is that the Dell Dock is the last thing to load after my antivirus and firewall and spyware programs. My question is, is there anyway to make the Dell Dock load first? Is there anyway to do this even with registry hacking? I want the Dell Dock to load up before most of the other startup programs.

View 4 Replies View Related

Graphic Card: Computer Freeze For 2-5 Second, Next Is Black Screen For 2seconds(as Monitor Is Shuted Down) And Next Is Black Screen While I Don't Stop The Game

Mar 15, 2008

I have a problem with this graphic card, when I run a game with better graphic details. My computer freeze for 2-5 second, next is black screen for 2seconds(as monitor is shuted down) and next is black screen while i don't stop the game. Next I see this-> I hope that you solve my problem(and see that image) BTW: if this problem was solved on this forum sorry, but on system instantForum i was never been and i don't know how it control. Or if this post is in bad category please send message for me when you move it.

View 9 Replies View Related

Recovering Files:, "Configuring Updates"

Apr 12, 2008

when I just turned on the computer the message "Configuring updates" and "Please wait" appeared. Afterwards, when it was completed, all the programs previously open (I kept my session in memory) were closed! When I opened IE, all the tabs were there, but other files I were working on were gone.

View 5 Replies View Related

Install :: Oading Files Screen And Then Screen In Getting Black

Mar 24, 2008

I am building a new system and have a new copy of Vista Home Premium 32bit.

I got it all put together and tried to load Vista. It got to the Windows is loading files screen and then screen in getting black video. Keyboad and mouse stopped working at times. So I updated the board BIO's per intel through iso image and same thing. So I tried installing XP and got to the F8 screen to accept lic. and it just reboots everytime.

Any ideas why Vista would stop? Added the info about the XP install so it may help.

System:

Intel D975XBX2 mobo
Corsair 2048MB PC6400 DDR2 800MHz DHX
BFG GeForce 8800 GTX OC 768MB PCIe
Intel Quad Core Kentsfield 2.4Ghz Q6600 CPU
SoundBlaster xFi XtremeMusic
500GB SATA/300 Baracuda
Siteck Eclipse keyboard
Logitech G5 laser mouse
Viewsonic VX924 LCD
Lite-ON 20X DVDRW SATA LH-20A1S-12 Super-Multi Int
Masscool 8WA741 CPU FAN w/Heat Pipes 775

View 9 Replies View Related

Running The Screen Not Centred & Black Bar On Right Of Screen

May 14, 2008

I have recently bought a new PC running Windows Vista Home Premium. I have loaded the above programs for my son and when they a running the screen is not centred and the is a black bar to the right of the screen approx 3 cm wide. I have tried to run the games in compatibility mode and as adminstrator as recommended with other games but with no success.

View 7 Replies View Related

Screen Saver To Black Unresponsive Screen

May 2, 2009

I am having a very wierd issue with vista's screen saver. So basically when I leave the comp idle it goes into screen saver then turns off the monitor after 15 mins. Sometimes, more often than not, I come back and move the mouse and hit a few keys on the keyboard and nothing. The monitor wont come out of standby I try turning it off and back on, and nothing. I have the latest drivers for everything in my system and I checked the power management settings and they both are able to wake the computer up. I have a G15 keyboard and I keep the leds on and when this happens the leds are off and the lazer for the mouse is off too.

View 5 Replies View Related

Boot: Screen Hangs On A Black Screen

Nov 13, 2007

i went into my HDD and scheduled an error checking..well windows loaded as normal, but no error checking occurred i guess...now after the green bar is done, the screen hangs on a black screen.

View 7 Replies View Related

Blue Screen Of Death, Screen Going Black

Nov 19, 2009

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6000.2.0.0.768.3
Locale ID: 3081
Additional information about the problem:
BCCode: 1000007e
BCP1: C0000005
BCP2: 98DD3A3D
BCP3: 8837B8FC
BCP4: 8837B5F8.......

My one guess is its something to do with the display driver maybe because that has been stuffing up a bit of late, in the way of the screen going black for a couple of seconds then recovering.

View 4 Replies View Related

Should Not Black Screen Full Screen Mode

Oct 5, 2009

Why do I get black picture after I have pressed PrtSc button? Of course it shouldn't be black and it happens only when the screen is on full screen mode (for an example videos, games etc.). It also doesn't matters if I am using just PrtSc or Alt + PrtSc - the result is the same. It looks like this ---> http://img525.imageshack.us/i/blackba.jpg/ (and, no, I didn't painted it black).

View 4 Replies View Related

Emails Recieved But Not Send

Mar 29, 2008

i'm doing this for mum mum because she has got a new windows mail account but using her old google mail address (i'm not sure how, the man next door set it up for her..!). Emails will come through, but every time she tries to send one it comes up with a big box saying "some errors occured while processing the requested task" and underneath in the details section it says this:

An unknown error has occurred. Subject '?', Account: 'pop.gmail.com', Server: 'smtp.gmail.com', Protocol: SMTP, Server Response: '554 Please check that your outgoing mail server settings are correct. Contact your service provider's technical support for assistance.', Port: 25, Secure(SSL): Yes, Server Error: 554, Error Number: 0x800CCC6F

View 9 Replies View Related

Unable To Recieved Incoming Emails

May 3, 2009

I am with Virgin Media, but suddenly from 29th April I haven't received any emails to my account, my son's account is fine and I sent a test email from his account to mine and nothing, so I tried the other way round I sent him a test email and he received that, so I know I can send emails but just not receive.

View 9 Replies View Related

TV Tuner For List Some Of The Major Channels Recieved

Jan 9, 2008

I was wondering what the best value for money tv tuner? And If you can, list some of the major channels recieved.

View 9 Replies View Related

Cannot Log-on And Black Screen

Jan 30, 2010

windows seems to boot up partially but does not get to the log-on screen and instead goes to a black screen and all you can see is the arrow shaped mouse pointer and thats all. I put the windows cd in to try to repair the installation and booted from that but still the same thing happens

View 6 Replies View Related

Screen Is Black

Apr 21, 2009

Alrighty I went off to work with my pc turned on a few days ago, I come back and the screen is black and nothing I do is responsive to the screen. I then reboot the Pc it leading to a blue screen. Some times when I reboot it will blue screen some times it will just be a black screen that is un responsive. I have tried f8 options in advance boot optiotns, Ive tried re installing windows- it claiming my disk is full. Ive tried system restore it also says I have a disk failure. It wont let me check errors in the properties options on my hard drive. I have done a virus scan(no virus's) and I have 300gigs left of space.

View 8 Replies View Related

Screen Becomes Black

Jul 21, 2008

is that when he tries to delete some files that he previously stored in the C:"Account Name",he gets a message saying that the file is unavailable in the specified location.However,that is not my main problem now,because when I was trying to help fix this problem I typed "msconfig" into the RUN box to get the startup utility box and I unchecked some of the background programs to prevent them from loading automatically when the system starts,in order to speed up the system;but when I restarted the system I can see the first screen, which is by the manufacturer of the labtop;then when vista starts loading, the screen becomes black and don't display anything,although I am sure that Vista is loading successfully but I cannot see it on the screen.

I am assuming that one of the programs that I have unchecked is responsible for displaying. I have tried to do a repair installation by using a bootable Vista DVD but I couldn't because I cannot see anything on the screen.I tried logging in on safe mode but that did not work either. How can I undo the changes that I have made to startup utility.

View 5 Replies View Related

Black Screen After Log In

Jun 12, 2010

I have two users set-up, user K (with Administrator rights I believe and a password) and user N. If I login as user K, after I enter my password my computer will run for a bit (I can see/hear it logging in) but after a few minutes the screen goes black except for my white cursor and nothing else happens. If I then hit ctrl-alt-del I can see the Task Manager and switch users to user N which will start up normally and give me access to my desktop.

View 4 Replies View Related

Black Screen With Games

Jun 27, 2009

I have tried installing many different games on my pc, which are quite new and have been released in the last few years. The installation goes fine, and everything is great. When it comes to launching the game, well, i double click the file to run the game, and i get a black screen. Nothing happens afterwards. It just stays black. 'Ctrl + Alt + Delete' does not work, and neither does 'Alt + Tab', or any other keyboard shortcuts. This results in me having to hold in the power button and turn my pc off like that.

Any idea's on what could be wrong? It is extremely frustrating, due to the fact that i've tried running about 3 - 5 games on my computer, and neither of them work, without a black screen coming up after trying to launch any of them. I've tried numerous things like 'Running as Administrator' and changing compatibillity modes and so on and so forth, but none of that works.

View 9 Replies View Related

XFX 680i SLI Screen Going Black

Apr 26, 2008

I was having a weird problem with my screen going black at random after installing any version of Vista, and kept having to force a restart because there was no way to get the screen to come back on. I searched all the forums and it seemed to be very common, but as with most of the forums everyone was argueing about how to fix the problem instead of helping the people with the problem. So I'm posting this one in the hope that it may just help one or two people with the same problem.

My remedy was simply to update the BIOS to the latest version P32 I think from the XFX website, and the problem was no more, I also updated the High def audio driver from the same site, now my machine has been running flawlessly for three days now.

View 3 Replies View Related

Black Screen After Loading Bar

Jan 18, 2010

I was hoping that some of you guys could help me with a problem. As the title says, my screen goes completely black after the loading screen with the green loading bar, but before the usual windows vista circle is supposed to appear. I have also tried to use a vista x64 recovery disk. Here I only get the blue background a mouse I can move around on the screen, meaning I have no options to choose from. Does anyone know what the problem might be? And if so, how to possibly fix it?

View 9 Replies View Related

Black Screen Right After Bios.

Jun 18, 2008

I have Vista Ulimate 64-bit and everytime that I reboot I get a black screen before the Microsoft Windows scrolling bar.

This is the sequence.
- I reboot.
- I get my bios information screen.
- I get the white, blinking line in the upper left corner of the screen.
- Then the screen goes black with no hard drive activity.

I then can perform a Complete PC restore from my second partition on the same SATA Hard Drive and I will then be able to boot into Vista with no problem.....until I reboot, then I get the Black screen again. It is a vicious cycle.

I have tried to remove video cards (2 x 8800 GTS), memory (4 GB), sound cards (X-Fi Music), load the default bios settings....nothing works. Only a Complete PC Restore cures it, but only until I need to reboot the PC.

View 9 Replies View Related

Screen Goes And Stay Black

Oct 8, 2009

I run Vista HP/SP2. The other day after various installs, updates and maintenance tasks I ran with no problems and ended the day by putting my laptop into hibernate mode. The next day when I powered on, my system would not come up...my system disk C: was corrupt. I finally got System Repair to run and it appeared to fix and recover my C: disk to the point that I can see my files still exist via Recovery command prompt. However when I
restart, my screen goes and stays blank (black) with my cursor usable but to no purpose. I tried System Repair again but it tells me it can find nothing to repair. I tried starting in safe mode and it loads two screens worth of windows files before going to a blank (black) screen with my cursor usable but to no purpose. The last windows file loaded is a crcdisk driver file.

View 9 Replies View Related

Black Screen After Login

Mar 27, 2009

When I login all I get is a black screen and "my documents" is open. Basically, the OS has GONE! I can still use the computer, ctrl alt delete etc.. run tasks, just that there is no desktop or toolbars etc.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved