so i've got an hp pavilion dv4 laptop with vista 64 with on board ati 3200 using shared memory. the laptop has 4gb of ram with 1.5gb allocated to the on board video. how can i reduce that amount?
View 4 Replies
I have Vista 64 with 4 gigabytes of memory. Vista shows that I have 4 gigabytes of memory in the system properties and welcome screen but my Winver command and the Task Manager displays that I have only 2.7 gigabytes of memory? I recently installed a Radeon 3870 HD 1 GB graphics card. Could my GPU could be eating up the rest of the memory. My motherboard is a DFI Lan Party UT NF4 Ultra D. I am fairly certain it has the latest BIOS firmware. I am confused.
View 5 Replies View RelatedI am trying to change the size of Virtual memory on my sisters laptop. It is running vista home and has only 1 gb of RAM. I click on where you change the virtual memory and click CUSTOM (on the C drive, which is only hard drive she has). And i set it to 2048 min and 2048 max. I Click set then ok. then ok again, and once again ok. Then it prompts me to Restart the computer, so I do. But after I restart and check to see if it worked, it still shows that the custom size wasn't added.
View 8 Replies View RelatedI currently have 4GB of RAM installed, of which in real terms, only 3.07GB is actually being used by my system.
I am wondering, given that my RAM is sitting at max. levels, if there are any reasons, advantages or benefits to be had in changing the Virtual Memory - Paging File Size for all Drives, from the current size of 3369MB to the recommended size of 4603MB, or more....say 4950MB??
Would changing the video card on my pc improve the quality of video on my extender. I get pixelation on skin and some motion drag when I am watching my videos through my 360.
View 6 Replies View Related[Reading around it seemed the General Forum was more appropriate that the one for Graphics Cards. But please move this thread if needed] Is it literally true that my computer is limited to 2 GB RAM internally? Reason: I need at least 512MB total video graphics memory. With what I have now I was able to get it up to:.....
View 9 Replies View Relatedso i wanted to know what is "shared system video memory" and how to remove it? I learned it was RAM that was used to help the graphic card that is new with windows vista, but am I loosing this ram in the games or is it not important? i have an asus F3JM AK022H with geforcego7600 (512mo dedicated memory) and 2go RAM.
In my graphic card properties it's noticed that i have 512mo dedicated video memory, 0mo system memory, 767mo shared system video memory and 1279mo total graphic memory (the 512 of my GC and the 767 "shared system video memory")
So my question is : do I loose those 767mo of RAM during my games? (i don't think my CG needs more memory since it already has 512mo dedicated), and I have only 2go RAM so if I loose 767mo i don't have much RAM left. And can I change this setting or disable it?
I've bought the pc, whose I'm writing, 3 weeks ago. I found that the unit C: has 70.7 GB of free space, but I haven't put in my HD this amount of memory (73.3GB). If I go to "My computer", then in directory C: and I press 'Select All and then Properties', it appear that I've used "only" 50.3GB. I ask you what is the source, of the "lose" of 20.4GB And I find this so uncommon, because I think that I haven't putted 50 GB (including the OS) in my main HD.
View 4 Replies View RelatedMemory DiagnosticsIf Vista detects a memory problem in your system such as a faulty RAM module, it will display a notification asking if you want Vista to try to diagnose the problem.Then again you may also recieve the sudden BSOD with the error MEMORY MANAGMENT at the top. You can manually run this tool anytime just typememory in the search box inside the start menu.This tool offers you two options: restarting immediately and checking for problems, or running next time you reboot your machine (the memory diagnostic tool must run at boot time).
Network DiagnosticsWindows Vista also allows you to check the connectivity of your network connection using the Network Diagnostics Framework: An infrastructure and a set of built-in and extensible components that attempts to automatically diagnose and correct network connectivity problems. The usual way to run this check is to open Network Center and click the Diagnose Internet Connection link on the left Vista will either identify ............
I had 4GB physical memoryon the PC. With Windows vista 32 bit, available memory is shown as 3.3GB. I asked and was told that only under 64 bit windows, will the available memory be 4GB. When I upgraded to windows 7, I chosed 64 bit, but the available memory shown in the system is still 3.3 GB. Why is this and is there a way to make the full 4GB available? It's possible that my video card is using RAM instead of its own RAM. If I install a video card with its own RAM, will the full 4GB be available?
View 9 Replies View RelatedI have a problem with Vista Ultimate x64 SP1, I always seem to lose all my free RAM within an hour regardless of system activity, even while idling. I have noticed an svchost.eve process runs each time I reboot which seems to bloat constantly although when I close it down it only frees up about 800MB, what's happening to the rest of my 8GB??? When I launch Task Manager it says I'm only using 10% Memory but free RAM sits at 0?!?!
View 9 Replies View RelatedI had 4GB physical memoryon the PC. With Windows vista 32 bit, available memory is shown as 3.3GB. I asked on usenet and was told that only under 64 bit windows, will the available memory be 4GB. When I upgraded to windows 7, I chosed 64 bit (I did clean install of course), but the available memory shown in the system is still 3.3 GB. This is show in both task manager under performance->Physical memory->total, and 'property of My Computer'->Installed memory (4GB/3.3 GB usable)........
View 7 Replies View RelatedDVD Ripper rocks your life What other advantages of *'DVD Ripper'Select DVD subtitle and audio track Select any available subtitle and audio track provided your DVD movie offers. Advanced Video Encoding Settings Video encoding settings: video resolution, frame rate, encoder, and bit rate. Audio output settings: sample rate, channel, encoder and bit rate. Merge into One file Support join several chapters/titles into a signal file with "Merge into one file" option. Trim any DVD title chapter Convert any clips of DVD chapter/title which you like most. Customize cropped video Cut out the unwanted video area, like black sides. Customize the video frame size according to the scale of cropped video.
Adjust DVD Video Effect Apply video brightness, contrast, saturation, gray/emboss/old film effect, horizontal/vertical turning. Video Snapshot Support takes snapshots of the playing video, and save them as jpeg, bmp, or png. Auto Shutdown Computer Tick "Shutdown your PC when conversion finished", you won?t wait around your computer. Lifetime free upgrade and technical support We provide free software upgrade service periodically; this is privilege only for registered members. No adware and spamware No ad and spam disturbance. All the products listed support free download, it?s free to try until you think they are you wanted of then buy later. Each product has a user guide page of it own with detailed step by step describtion and you will find how simple and fun it is. have a nice day.
I am fairly new to the forums, and VERY new to Vista x64. The machine is new, and I was trying out some apps and games, I was in Secondlife when I got an error messege saying I was out of memory and needed to free up memory. I shut down the app and restarted it. Runs but I watched Task manager and saw my free memory down to almost nothing after an hour or so. The cached seems very high.
I did alittle research and decided to set a second page file on my 1TB hard drive, (OS is on the other HHD's )( regulated by system for size ) I'm not really sure whats going on. Example of just task manager and this page openis attached. Again, any help would be great in getting the memory set up on here optimal.
I have 6gigs of DDR3 memory at 1600hz. Running on Vista 64bit and every now and again my memory performance just maxes out. The problem can occur around the time when I am installing something but I dont think its always this way. I have read forums where it could be the hardrives performing self diagnostics. I have all the latest patches for vista.
View 7 Replies View RelatedI have a quad-boot Intel CoreDuo machine with 4 GB of memory and an ATI AIW X1900 Radeon (multi-booting courtesy of EasyBCD). To put the matter as quickly as possible, all four systems (Vista 32, Vista 64, XP, and Ubuntu) have been happily coexisting for a long time. I haven't used Vista 64 for about 10 days and went in to do some work on it this morning. To my surprise, the video disappeared immediately after the green startup wait indicator. Eventually, after about the usual amount of time and hard disk activity, the startup sound came on but absolutely no video. I restored my full backup of the Vista 64 partition from last Sunday=97 same problem!
I went in on safe mode but it is impossible to change video settings or install new drivers in safe mode so that was a dead end. I tried the repair utility that comes with Vista but it could find no problem with startup. My working hypothesis is that something has gone wrong with the video drivers although that may not be the case. Even if it were, I can think of no way of fixing it short of completely rebuilding the Vista 64 system checked desperately do not want to do
who has purchased a JVC Everio HDD video camera has probably learned that they chose to use some god forsaken proprietary video format - the .MOD extension. Apparently this is some sort of MPEG2 encoding, however, most major video editing suites prefer not to accept this format? what we need is something more common? such as .AVI or .MPG. I would be happy with the .MOD file format if the software that came with the JVC Everio actually worked.
I have tried many video converters software with no luck so far, it?ll get halfway through the process, and then something will fail. Now a type of converter called *'Mod Converter' appears. Here I want to share the one regarded as the best on the market by most people. I also want to share the instructions about how to use it. Step 0: Free download *'4easysoft Mod Converter 'and install it. ...........
I am running Windows Vista Ultimate and when I stream videos from websites like Gametrailers.com as either a Windows Media or a Quicktime file the video is choppy and has sound issues. If I download the same video there is no choppyness and once the stream is no longer on HTTP and is on CACHE it is fine. I know i have enough bandwidth for the video and under statistics I does not show any errors .I have all the latest drivers and service packs. I have reinstalled Vista as both 32 bit and 64 bit to see if there was some difference. I also have this same issue on my Laptop running Vista.
View 4 Replies View Relatedhow to convert both DVD and video to PSP video/PSP movie Part1. How to rip DVD and convert MOV/AVI/WMV/ASF/Divx/Xvid/MPEG/RM to PSP MP4 video. Part2. How to upload/transfer PSP files to your PlayStation Portable (PSP). How to rip DVD and convert AVI/WMV/MPEG to PSP 1.You can download this software from ' Share : how to convert dvd and video to psp ' (http://tinyurl.com/2ytw9d) for free. Run Cucusoft PSP Video Converter Suite. If you want to rip DVD movie to PSP MP4 Video, press the first button to open "DVD to PSP Converter". Then click the "Open DVD" button to load your DVD files and click start to rip your DVD to MP4 video.
Click "Open file" to import your video files which you want to convert to PSP video. Modify your output file settings.On "Audio/Video Output Settings" panel you can chose output format for you files such as H.264 Movie Note: If you cannot find "Audio/Video Output Settings" press "Profile" button. And you can change some Audio/Video Options and save to a new output format. Click "Output" button to chose where you want to put your converted PSP files.
I'm running Vista 64 Home (SP1) Premium on a homebuilt machine w/8GB (4 X 2GB modules). Windows is reporting 8 GB of Installed Physical Memory but is reporting only 4 GB of Total Physical Memory. I first noticed this when, after installing a game, the game system specs said 3092 MB of RAM.
I have checked the BIOS and it recognizes 8 GB. Memory Remapping is Enabled. Under Memory Remapping is "PCI MMIO Allocation: 4GB to 3328 MB" (?). MSConfig Boot Options shows Max Memory is not checked and no value in the box below. I tried enabling it and using 8192 as the value, but it made no difference. DxDiag shows 8 GB installed RAM. how I can get windows to make available all 8 GB of RAM? (Motherboard is ASUS Maximus II Extreme w/Intel Q9550 processor running at Q9650 clock speed, memory running at 1127 MHz
My question: can I simply install the 64 bit version over the current 32 bit? Can I just put the discs back into the machine and let Vista take it's course by ticking the 64 bit option when it appears on the load up screen?
Or, do I have to go through the entire process of re-formatting/wiping the drives and start from scratch? I am using the Ultimate version, and am not sure about these things.
I bought a new computer and it came with Vista Premium 64bit, can I have it run on 32bit, instead of changing my printer and some of my software.
View 9 Replies View RelatedI have a newer computer purchased in August 2008, HP Pavilion a6530F. It came with Windows Vista Home Premium Edition (64bit)
Hard to find software to work on it, occassionally I can make something work by changing the compability mode or running as administrator. Had I known all this when I got the computer, I would not have bought it.
How much trouble (cost too) to have someone change from Vista 64 to Vista 32. I am guessing that entails new drivers etc. I am just a normal user, don't play games, only the granddaughter age 11 plays games like Nancy Drew. I have a 640GB hard drive which is way more than I ever needed. Was not aware of software issues like I can't use my Photo shop Sofware and other things I have.
I have Windows Vista 64 bit. I need to download Adobe Flash Player, I receive message cannot run on 64 bit must change to 32 bit. How do I change?
View 5 Replies View RelatedRef. Windows Vista. I have noticed that when viewing Network that my router displays its type and most of the password. I'd like to remove the password information from the icon information. File - Rename is greyed.
View 9 Replies View RelatedI currently own a Vista premium 64bit laptop.....I'm trying to install Empire total war, which requires Directx 10. In order to install that I need to activate .Net 3.0. I attempted to do this by going to Control Panel....Turn On/Off Windows Features....checked all of the boxed under .Net 3.0.....then it configues but then displays the message "an error has occurred. not all of the features were successfully changed" I have no idea what to do....I attempted to see if I could uninstall .Net 3.0 but I couldn't find it anywhere.
View 9 Replies View RelatedI have to delete the affected favourite sites then 'delete all' from internet properties then add the sites again.
View 9 Replies View RelatedI didn't see this exact problem in previous threads, so I'm asking for help with it.
I recently mistakenly put a DVD-RW disc in my computer's E Drive. It was the first time I ever used a DVD-RW, and I bought a box of them by mistake thinking they were CD-RW discs. (I wanted to save money that day, so I thought I'd get the discs rather than a USB stick.) Now when I go to Computer> E Drive> Properties> Recording I have some options, but see no way to make the E Drive have CD-RW as the default rather than DVD-RW. I checked all the other tabs in E Drive> Properties as well, but can see no way to do it. This is a problem, because I just tried to format a CD-RW disc, and it went through the process only to open a window at the end saying the disc was unable to be formatted. I don't know if the change in E Drive from CD-RW drive to DVD-RW drive is related to the problem I had formatting the disc, but I suspect it might be.
My dad's laptop has a HDD which has 2 partitions. Both are WinXP which correctly shows on boot. My question is can I remove the first XP and install Windows 7 RTM instead without messing up the boot.
View 6 Replies View RelatedCan someone tell me to ip change.. I have tried diffrent ways to change but i cant seem to figure it out.. Several ppl online can do it.. I have Windows Vista and Dsl
View 4 Replies View RelatedI have a problem with my icons changing at will. Does anyone have a fix for this.
View 4 Replies View Related
