I have a Lexmark Z515 printer connect to a Desktop via a USB cable. I am looking to share the printer connection so that my laptop (Vista Home Premium 32-bit) can print from it. Whenever I try to add the shared printer via the add network printer option on my laptop I get the error message: "Windows cannot connect to the printer Operation could not be completed (error 0x0000000d)".
View 4 RepliesI've got a problem connecting to Hewlett Packer LaserJet 1020. Vista x64 connects fine and the printer works but Vista 32bit refuses. I'm constantly getting this error message: "Windows cannot connect to the printer. Operation could not be completed (error 0x000003eb). I installed Vista 32bit drivers from HP's website. Strange that Vista x64 works and 32bit doesn't.
View 4 Replies View RelatedI'm trying to access 64bit printer share that have been installed on a Windows 2003 x86 server to my Vista Ultimate x64, but I continually get "Windows cannot connect to the printer. Operation could not be completed. (error 0x0000007e)". I have added the x64 drivers by doing the following: From my Vista x64 machine, surf to the \serverprinters. Right clicked and went to server properties. On the driver tab, added a new x64 driver. Pointed to the fresh downloaded driver for HP LaserJet 4250 made May 6th. After doing this, I still get that error message above when I try to add the printer share to my Vista machine.
View 4 Replies View RelatedOn several Windows Vista Enterprise 32-bit computers, we get the following error message: Windows cannot connect to the printer. Operation could not be completed (error 0x0000007e). when we try to install the network printer \PrintServerUSB-Imagistics2330.
The printer will install and print on both Windows XP and Windows Vista The GPO Deployment per machine reports:.......... Description:
Group Policy was unable to add per computer connection prospectorcreekUSB- magistics2330. Error code 0x8007007e. This can occur if the name of the printer connection is incorrect, or if the print spooler cannot contact the print server.Event Xml:
1037
3
0
0x80000000000000
217777
Application
cs-Nameofcomputer.boisestate.edu\PrintServerUSB-Imagistics2330 0x8007007e...............
I have an XP Pro PC on my home network and am trying to connect to a Lexmark X215 printer that is shared off of the XP Pro machine. I am connecting with a new Vista Home Premium Dell XPS M1530 laptop. The rest of the network is working fine - shared files, folders, access to the Internet, etc.
The message I get when I try to connect is that Windows cannot connect to the printer.
They were sharing a printer but now Vista is not seeing the printer. When I try to "add a printer" on Vista I get the following message: windows cannot connect to the printer. Make sure that you typed the name correctly and that the printer is connected to the network.
View 4 Replies View Relatedhey guys another thing here i have a Lexmark X1185 that i have networked for along time with xp on my desktop and vista on the laptop, now since i installed vista x64 on the desktop i can no longer print from the laptop, yes i know i need to reinstall it on the laptop one problem though i can't do that. i can find the printer but it wont connect to it.
i keep getting "windows cannot connect to the printer. operation could not be completed (error 0x0000000d). i do have both the x64 drivers and the x86 drivers installed on the x64 desktop.
I can connect to the home network that I set up previously, I can "see" the HP220dtn printer attached to the XP desktop, but I cannot connect to the printer. I continue to get the error, "wrong printer driver" as I've seen in other posts..................
View 5 Replies View Relatedwhat does this mean? and what do I do about it? I have 4g of memory. The message is . . . Windows cannot connect to the printer. There is not enough memory to comlete the operation. Please close some programs and try again. I'm running vista ultimate x64.
View 5 Replies View RelatedSo I can connect to the network with no issues....but the rest of my computers are all either XP or Vista 32. My problem comes into my server...that is XP. I have my files and printer on this server, and I connect off of it thru the wireless network. I cant see my printer or the files on the server. The only other computer that shows in my network, besides the lynksys, is the other Vista computer in the office.....which currently does show the server and printer.
My old laptop crashed and I just got a new Toshiba, so this is how/why I have an issue. I checked and its setup as private, Im thinking the 64bit is my problem can anyone hopefully NOT confirm this. Im hoping there is something else that I am missing and its not the 64 bit...I hope to not be here too long as that means issues, but I will be watching the forums from a distance to chime in if I can add anything
I do an add printer on my wireless connected laptop. It finds the printer on my XP desktop but when I click OK it say it cannot connect, access denied. This works fine on my other desktop and I am stumped. The printer works fine directly connected to this VISTA laptop as does file sharing.
View 9 Replies View Relatedi have 2 computers and one laptop in my home the main computer is xp, laptop is xp. the hp printer is attached to main computer. my daughters computer is vista. i can see all computers on the network and had no problem in adding the printer to my xp laptop, but cannot add the printer to the vista computer. i have norton on all computers and have removed it and still same problem. when adding the printer on the vista computer, i can see the printer but when i add it produces this error "Windows cannot connect to the printer. Operation could not be completed (error 0x0000046a)"
View 5 Replies View RelatedWhen I try to Connect to a Shared Printer I get the Message: Windows Cannot connect to the printer. Operation Could not be Completed : error 0x000003eb.
View 4 Replies View RelatedI just purchased two new identical machines. I have a home LAN running W2k Server. (downgraded from a domain to a workgroup). One machine sees the server no problem. I can connect to drives and use the printer. One machine refuses to see the server. When I go Run and type in \ipaddress, it shows up. When I try to browse for it, it never shows up. Both machines on same LAN, same WORKGROUP. I've clicked everything I can find but the one machine just won't find the server. I'm baffled.
View 7 Replies View RelatedVista Home Premium SP1 - trying to connect Brother HL-2142 laser printer as a _local_ printer with USB cable connection. I have installed exactly as instructed in printer manual. When I go to print, file appears in print queue until it finally errors. When I look in Device Manager->Universal Serial Bus Controllers->USB Root Hub properties->Power tab, the description shows "Unknown USB Device". Not sure if this is what the problem is. If it is, why would the USB Device be unknown? Also in Device Manager->Other devices, I see the HL-2140 printer with a yellow key hole. Printer manual says using drivers and so on for HL-2140 is fine for the HL-2142. When I try to add the printer manually, I can't work out which is the USB port. Doesn't seem to be one. I've attached document with screen shot of existing ports to choose from....
View 4 Replies View RelatedI was able to load Vista SP1 RC Refresh 2 without a problem. I was in hopes that it would help me with the issue of trying to print to a networked printer on a shared XP machine from my Vista laptop where I have the SP1 loaded but that was a crock. Still getting error 0x0000000d when trying to connect to the printer after install. I am about to go back to XP and dump this OS. I just can't see how MS can justify not fixing these BIG problems that have been around for a majority of the users since the OS was released. Anybody got a pocket sized printer they will sell me cheap?
View 4 Replies View RelatedI?m trying to install a network printer on a Vista machine. Vista is able to locate the printer on the network but when I select it for installation, for some time, Vista tries to connect and then pops up this message: "Failed Connecting to Printer - Access Denied" And then another window pops up with this message: "Spooler Subsystem Application stopped woring and has been closed." In fact the spooler service always stops, so I have to restart it on the services windows, within Administrative Tools of the Control Panel. The machine is new and has been installed yesterday. Everything else works fine. The printer I am trying to install is on a Windows XP Professional machine within the same network (naturally).
View 9 Replies View RelatedI have a Dell PC with XP Home and a Dell A960 Printer attached to it. I also have a new HP Laptop with Vista premium that has also had the same printer attached to it at times so the drivers are installed on HP laptop. I recently installed a router so I can use laptop wirelessly. That works fine. However, I am unable to print to the host printer wirelessly. I get message saying printer cannot communicate with computer. I tried everything I found on Google searches. I have enabled printer sharing on both. Do I have to make the Workgroup names the same and if so do I change the Dell with XP or the HP with Vista? I changed the Dell once to no avail so I changed back. Do computer names have to be same? I am a novice at networking.
View 6 Replies View RelatedDose anyone knows if they make a printer cable: I received a new lab top and it didn't come with the older printer jack on the computer. I guess I need to use one of the usb ports? My Epson 660 still works I hate the idea of getting a new printer when my old one works.
View 4 Replies View RelatedJust installed Vista SP2. Everything seems to work OK except for my Dell 1720 printer. It now prints an extra page before the actual document to be printed. There are just a few spurious characters printed at the top of this unwanted page. The following "proper" pages are OK. I have, so it seems, the lastest driver available.
View 7 Replies View RelatedI cannot set the default printer in Vista Business with SP1. I am connected to a domain trying to set a network printer hosted from a server as the default printer. I have seen a dozen or more questions similiar to this in this group as well as on other forums and found no answer. I see a MS-MVP come on and tell people to remove local printers such as the XPS and adobe printers. This is a ridiculous solution. Sure it may allow you to connect to a network printer but you have removed printers that you are going to need to use again. Unacceptable.
So far the only other solution that does not include deleting all the local printers off of the machine is to make sure you have write permissions to the default printer registry key. I have checked this and I do have write permissions(Full Control). SO WHAT NEXT? IS MICROSOFT EVER GOING TO COME OUT WITH ANOTHER FIX FOR THIS?
I had added about 3 printers to my printer (2 via network) but suddenly one day there weren't listed in 'My Printers'. I tried to add them again but it always show a message showing: Windows can't open Add Printer. The local print spooler service is not running. Please restart spooler or restart the machine' So i restarted the machine but still got the same message. what a 'print spooler' is and how to solve this problem
View 5 Replies View RelatedMy set-up is very simple yet I cannot connect to a device. I have a Router which has three connections via ethernet.
1. Vista Machine
2. XP Machine
3. Music Server (systemline)
The problem I have is that my Vista machine will not connect to the music server - I cannot see the shared folders. My XP machine connects to it no problem, e.g. if I enter the location (
i have installed a printer from my main pc which uses xp pro to my new vista lap top ----- it shows the icon for the printer in the tray but i cannot still print any thing
View 7 Replies View RelatedI just upgraded my XP home edition to Vista home premium with an upgrade disk provided by Dell. Before the upgrade I uninstalled my HP 2575 printer and software because it was listed as a compatibility issue. After upgrade I reinstalled new software from HP for my printer from the HP website. I plugged in the USB cable from my printer. Vista recognized the new device but would not put it in the printer folder in the control panel. Vista did find driver software online but could not install it. The HP solution center tells me no HP devices have been detected. When I try to print I get a message that I don’t have a printer hooked up. That’s the back ground here is what I have done.
I have updated Vista; most were successful some security ones failed. I have Service pack 1 I uninstalled and reinstalled HP software many times I started my spooler and reinstalled printer and software many times. I checked Task Manager and the hpqste08 services are running. I uninstalled virus protection and turned off the firewall. I have done everything I can find at HP, Microsoft and here. I tried to reload Vista but got a Worker Thread Returned at Bad IRQL error message so I stopped reload.
The one odd thing I did find was in the Device Manager. In the Device Manager the HP 2575 is listed twice. Once under IEEE 1284.4 compatible printer and once under Other Devices. When I click on the one under IEEE 1284.4 compatible printer and update driver software it finds the driver and says it’s up to date. When I do the same on the one under Other Devices, windows finds the software for this device but encountered an error when trying to install it. It does this when looking online and when looking in C: drive.The printer still does not show up in the printer folder in the control panel.
I have a Vista Home Premium Laptop, an XP Home laptop and an XP Home desktop (and an XBox 360) connected to my Linksys wireless G router and an XP Home desktop connected via CAT5 to the same router. All connect to the internet fine. The XP laptop finds and uses the printer on the desktop fine. I had setup a share of the Canon I560 printer, connected to my XP desktop, on the Vista laptop and it worked fine. I don't believe I made any changes, but now it won't find the printer and I can't seem to install a new copy.
The Vista machine will not detect the printer and won't even find the XP desktop or laptop on the network. The XP machines find each other fine. All machines get their IP address from the router via DHCP. All are in the same workgroup, or it seems so. Strangely the Vista machine shows WORKGROUP and the XP machines show Workgroup, even if I type the name in caps, XP still shows Workgroup and Vista WORKGROUP.............
I have a Vista Desktop that has a wireless router. I have shared a printer, but I would like my Mac laptop to be able to print to it. Do I install the printer driver on the Mac or on the Vista machine? If I install on the Vista machine, is there a special installer? The printer is an HP DeskJet 2445.
View 4 Replies View RelatedWhen I try to scan to email on my all in one printer. The printer does not recognize windows mail as a valid program. This all in one worked fine on XP
View 4 Replies View RelatedI have a WAN in my office made up of certificate security enabled different LANs. Windows file and printer sharing is disabled on this network and the network addresses are alotted using DHCP.Is it possible to share a printer attached to a PC on this network using TCPIP without using Windows printer sharing. What are the required settings for sharing?
View 4 Replies View RelatedFor the past year I have not been able to connect to Windows Mail. When I first got my laptop with Windows Vista I had no problem. Then I began to have problems where I could only connect some of the time and now I cannot connect at all. Does anyone have an answer
View 6 Replies View Relatedwhen i try to send mail from my windows mail it say's it can't connect but im on line with a cable modem
View 4 Replies View Related