Vista 64 Goes To Sleep: Tcpip.sys Errors
Aug 26, 2008
Vista 64 goes to sleep or coma while on the web using various bit torrent clients. Always requires a hard reboot. Happens even at night when unattended. Goes in spurts, OK for a couple of weeks and then quite often. Flashget is the worst, tried just about all the bit torrent clients available. Something has to present a conflict or it has something to do withh ATT Dsl (maybe). Had a lot of tcpip.sys errors in event viewer. There are ways to patch this but it is not something I want to do. I would just like to prevent these errors, if they really precipitated the coma.
View 6 Replies
ADVERTISEMENT
Jul 4, 2008
I am having a problem with my Windows Mail. I have had to do a restore using the Packard Bell restore feature on the advice of my tech guy and have encountered a problem. Prior to the restore everything worked fine.
The problem is in the send/receiving of mail. When I press the Send/Receive button the Windows Mail dialogue box (showing the error tab) comes up a tells me;
Some errors occurred while processing the requested tasks. Please review the list of errors below for more details?
No errors are showing and at the bottom of the box it shows ?0 of 3 tasks completed successfully?.
At the bottom right hand corner of my screen it shows the number of the last messages received. I can still send messages if I go to; Tools, Send and Receive and Send.
On starting up my PC and Windows Mail, mail is received and sent in the normal way but when I try Send/Receive any time after that the problem occurs.
I have checked my ISP mailbox and there are no outstanding messages.
I have checked all my setting against my laptop and they match, I have three e-mail addresses and am operating Windows Vista Premium, all updates are downloaded automatically.
View 9 Replies
View Related
Jun 15, 2009
from the first day I have seen plenty of errors in Event Viewer Acer Support even sent me System and Recovery Disc,s. I did a Recovery to Factory Default and there are 24 errors Errors in Event Viewer right after the Recovery was done, BEFORE I connect to the Internet for Updates. The only options this disc,s give me is Recovery to Factory default or recovery from back up, I don't have besides what good is it to make a backup when the first install is full of errors and I don't get to chose which applications or program s to install. In my older Computer, Vista home basic I get to Install Windows with no errors and get to chose which application to Install.
View 4 Replies
View Related
Sep 2, 2008
i have been getting issues with lock ups in vista, not sure what is causing the issue but suspect its driver related possibly with video drivers. I am sure this has been talked about previously but have tried lots of other peoples fixes but still get the same problem. Clean install vista 64 with no problems or event log errors, do a create system restore point. Install crucial updates only restart and check event viewer with no errors, create system restore.
Install latest Nvidia mobo drivers restart and check event viewer no errors, create a restore point. Install Nvidia beta drivers restart and check event viewer with lots of errors seemingly appear unrelated to driver so uninstall drivers and do a system restore point to before the install of drivers. Cleaned log of errors and restarted to make sure logs are still clean. Installed signed Nvidia drivers 177.41 and restarted and checked logs to find i still got some new errors but not as many, during the point of loading video drivers the first time i get errors and random lockups.
I was going to uninstall the drivers again but it locked up so after reboot when i got back to the desktop it was as if i didnt install the video drivers at all only the directory on C: was there but no interface or anything wierd? I then installed the drivers again and restarted, it seem to shut down and boot up much faster this time and seem to work fine at this point but still get random lock ups with no info in event viewer or BSOD?
View 4 Replies
View Related
Feb 6, 2009
this is my first post here and i dont know if i posted it in the right
section.
i used a tweaked tcpip.sys file and now that file is causing a BSOD
every time i boot up my windows. i m using windows vista ultimate x64. i
ve seen a similar problem on this forum and somebody attached the
original tcpip.sys file but now the file is removed.
i m so dumb and i didnt do any backup to the file...
View 9 Replies
View Related
Mar 7, 2009
I downloaded the lastest updates for Vista, upon reboot, got the following error Boot Critical file: C......Tcpip.sys is corrupt. Will not boot at all, even in safe mode. Inserted my DVD and attempted a "repair", it failed on TCPIP.sys and said there it was not able to complete the repair.
View 7 Replies
View Related
May 25, 2008
I would like to check the memory for errors BEFORE I load/install Windows Vista Home Premium x64 to avoid install hang-ups. Can you make an ISO CD of this program, load it in your CD/DVD drive and check your memory for errors? I recently updated the BIOS on the board (DP35DP) and it does show all of the 4GB of Kingston ValueRam PC800 1.8v (2x2gb) installed. I have good reason to believe that it's from a respectable manufacturer. Just want to make sure the memory is good before I load up the OS.
View 9 Replies
View Related
Oct 31, 2007
I use uTorrent and get some quite good speeds, but upon reading many tweak guides I'd guess you'd call them. They all recommend tweaking the TCPIP.sys file. Now I did this on XP Pro went I had it and noticed an improvement. Brilliant.
But I have done it, maybe three times now on Vista 64. Every time, following guides people have raved about and once I've followed them to the T, upon reboot, I have had no internet and the only way I seem to be able to fix this, is by reinstalling the OS.
I had tried using the untweak reg file that some come with, backing up the original reg and trying to restore it. Basicly I've tried many things. Now I say I've done this 3 times as each time I thought that I must have done something wrong for it not to work. So I would redo it. Does anyone have this tweaking working in Vista 64? All I get is a loss of internet connection to my computer.
View 6 Replies
View Related
May 26, 2009
I turned my PC on today and a black screen came on saying that windows could not be started because this file (tcpip.sys) was missing or corrupted. When I try using my install disk (as the black screen recommends) it tells me that it's the wrong version or something (I gather that it needs to be set up to be able to restore). I did however find a way to use this screen like Windows Explorer so I can copy files etc. Is there a solution to this? If not could you please send me a copy of the tcpip.sys file so that i could try overwriting my existing file?
View 8 Replies
View Related
Oct 12, 2008
I have an event that I would like to learn more about and Microsoft Technet nor google has helped me in this one. Event ID: 4228 Source: TCPIP Message: TCP/IP has chosen to restrict the scale factor due to a network condition. This could be related to a problem in a network device and will cause degraded throughput. Could this be a driver issue?
View 5 Replies
View Related
Sep 1, 2009
I have a WAN in my office made up of certificate security enabled different LANs. Windows file and printer sharing is disabled on this network and the network addresses are alotted using DHCP.Is it possible to share a printer attached to a PC on this network using TCPIP without using Windows printer sharing. What are the required settings for sharing?
View 4 Replies
View Related
Apr 15, 2009
I have the computer set to sleep after 5 minutes, needs to be that way for various reasons. The burning and verification of a DVD take over 20 minutes. Is there a way to prevent sleep during this process, since it aborts the burn process?
View 9 Replies
View Related
Apr 11, 2009
My machine is having some problems with Vista's hybrid sleep. When it wakes up my partitioning software (True Image) fails to read the partitions on my external USB drives correctly. The last time it woke up, Windows Mail hung while booting up and had to be restarted, and my sidebar clock had stopped. Is it best to avoid hybrid sleep?
View 6 Replies
View Related
Aug 17, 2008
I really like the vista sleep mode, but I have a question. Would using sleep mode often cause a slow down? I don't want my computer to be noticeably slower. I have vista ult. 3 gig ram, 9800 GTX, Intel e6400. also how can I make a shortcut for sleep...like win key+s for example.
View 9 Replies
View Related
Mar 23, 2008
I have both Vista 64 Home Premium and Vista 64 Ultimate )on two exactly the same Asus computers. After I have put the computers into the sleep mode they immediately restart.::
View 4 Replies
View Related
Nov 6, 2009
Could anyone explain to me from a theoretical or practical point of view what exactly is the difference between the Windows Vista Sleep and Hibernate options on the shutdown menu from the start button?
View 6 Replies
View Related
Oct 5, 2009
I have our wireless router hooked up to my computer at home. When I shut down my computer, the router stays up and working fine, allowing our wireless laptops access to the internet. The ethernet light stays lit and everything is fine. However, when I put my computer in sleep mode - something I would prefer to do rather than shutting it down when I'm not using it - the ethernet light goes out and the laptops can't connect to the internet. It even says no network connection is available. Does anyone know if there is something I can do? Change a setting in Vista or in the system BIOS ? Is it something to do with the router? The router is pretty old - Actiontec (GT704WG) but we've never had any problems with it. I'm running Vista Home Premium 64 bit on a custom built system with an E8500 @ 4.0 Ghz and 8 megs of RAM Motherboard - Gigabyte GA-X48-DS4
View 2 Replies
View Related
Oct 7, 2009
I'm having errors and bluescreens with my computer recently. Sometimes it will run and operate normally, others it will stop running applications, and give a bluescreen then shutdown. From reading others posts I have learned I need to give a description and a dump file, so I hope I can do both correctly. If any solutions posted please give specific directions, I am pretty good with the operating system, but fixing problems can be troublesome for me.
View 8 Replies
View Related
Oct 20, 2009
I would like to put my wireless mouse in inactive mode during sleep mode. As it is an mouse movement, usually accidental, wakes up the computer. I looked for a way but couldn't find this facility.
View 4 Replies
View Related
May 25, 2009
Have been using spybot S&D for a while now on my Vista Laptop, but lately it does not fix the errors it finds. Something to do with Administrator rights.
I am the only user and the administrator.
View 9 Replies
View Related
Oct 21, 2008
I have been living with rundll32 errors for a while on my video files, I upgraded from xp to vista. It has not caused any real problems. However a few months ago I seemed to lost ability to deal with windows personalization. Can not change anything in windows color, theme or icon's said admin had turned off.. I was logged in as admin. I could live with this also as I could change my background and had set the colors to what I liked.
Well now things are worse two days ago the rundll32 errors started to happen a lot, Firefox crashed completely, would not run.. windows problem reporting told me to upgrade would crash with rundll32 error. My recyle bin went away, and can not replace, change icon's causes rundll32 error. Yesterday vista would no start.. took two times of repairing with upgrade disk and now seems to be fine. Went to cmd.com in run to do a file check. got the error NTVDM.exe and command com will not load. NOw in personalize change color get rundll32 error. Checked event log they all seem to be the same error....
View 9 Replies
View Related
Dec 3, 2008
I explored my Event Viewer for the first time and noticed 1,000's of errors on it.
View 9 Replies
View Related
Mar 23, 2008
I've been battling an e-mail problem for quite some time, with little success. The below error presents itself, I've tried every available solution I ould find online, diabled firewalls, e-mail scanning, contacted my ISP etc..zero results. REcipt of e-mail is fine, I just cannot send, any thoughts out there?The connection to the server has failed. Subject 'test', Account: 'Home', Server: 'smtphm.sympatico.ca', Protocol: SMTP, Port: 25, Secure(SSL): Yes, Socket Error: 10060, Error Number: 0x800CCC0E
View 5 Replies
View Related
Sep 13, 2008
I went to perform a Norton Ghost backup of the Maxtor XP partion, with the destination of the WDC small partition, and ghost got disk errors somewhere, and so i have done chkdsk, crap cleaning and defragmentation to the Maxtor XP partition. when I tried a third ghost sesson, i got a BSOD, and now XP sees the WDC Vista partion as RAW. However, if I flip over to WDC Vista x64 partition and use that as the operating system, everything appears normal and runs normal. so what can i do to have XP see the WDC Vista partition as NOT RAW! (obviously, I can't format or reformat it from XP.) or do i just live with XP missing the Vista partion?
View 7 Replies
View Related
Jun 29, 2009
I just built a new desktop, installed Windows Vista Ultimate x64, and then after installing the drivers for my Logitech G15 keyboard,the software for running the LCD on the keyboard errors out upon startup, showing a MS Visual C++ run-time error. What's really starting to tick me off is that once this started occurring, (about 3-5 days ago), I have emailed Logitech Technical support, but so far, NO response. Not even an automatic response acknowledging they got the email.......
View 4 Replies
View Related
Apr 5, 2009
Some advise in how to build my i7 rig. Well a few things changed, and I don't have the i7. I got a few different parts here and there, and just finally put the rig together last night.
First thing is first. My computer is saying my CPU is only 2.0Ghz! It states the name of the chip, but in the bios and benchmark test, it says it's only running at 2.0Ghz. What is the deal there? How does that even happen? Do I have a bad chip? Or is my chip somehow being under clocked? Now for the FUN stuff. Ever since I first booted my computer up, I've had COUNTLESS BSOD errors here and there. By the way I'm running Vista Ultimate. As well as the errors I've encountered I've been having some odd graphic errors too. After around 20 minutes of use, all the images on my screen get changed back into like 1000 color mode (instead of Millions of Colors) so everything looks just horrible. And things like clicking on the Start Menu give me only half the menu. I thought maybe it was the Card overheating, so I downloaded Riva Tunner and cranked the fan up to 100% to test it out, and I still get the same issues. Then I figured it was my drivers, since the ones that were on the CD were obviously old. So when I try to go to Nvidia's site and download the correct drivers, and install them, Windows says that the .EXE is corrupt. And that happens no matter what, no matter how many times I download the proper drivers....................
View 7 Replies
View Related
May 23, 2008
I will be doing a few upgrade on the forums today....expect things to get funky. If you find any errors, please report them here so I can get them fixed.
View 9 Replies
View Related
Feb 21, 2009
I thought I saw a post from someone who was having this same issue but couldn't find it. I am trying to check an ext hard drive for errors and when I try to "safely remove it" and keep getting the message that it is still in use when there is nothing using it, the light is steady. This happens for both my drives often. What gives?
View 5 Replies
View Related
Apr 23, 2008
i had to upgrade my PC's so much to get it to work well, but it worked and the office 2007, amazing!, not once have I spent hours arguing with customers about why things that worked amazingly well in office 97 no longer work or having to explain the layout change... It really make's my life so much easier.. God bless Microsoft.. but after installing SP1 on my notebook I get numerous Visual C errors..I do however notice like 1000% performance gain in copy files over the network..Cause I was bored, I installed Windows 3.1 on a virtual machine (VMWARE).. And OH MY GOD! i think we've forgotten... On new hardware it loaded instantly.. It takes you longer to double click than it does to load the programs.. I'm starting to wonder if I should suggest DOS and Windows 3.1 to customers because it performs amazingly on current hardware.
View 4 Replies
View Related
Mar 23, 2008
I have installed Vista Ultimate. I've networked it and loaded Office 2007, adobe, cuteFTP and AutoCAD 2008. Everything worked great. I moved it to the work station area, and the only thing different I connect was a new 24" HP monitor. I found and installed the drivers for the monitor. I get no ? or errors in device management. But upon bootup every time I get this error message. "This computer must be restarted before updating can continue. Would you like to restart now." All of the MS updates have been done. I can still access the network, all programs seem to run correctly. I can surf the internet with no problems.
View 4 Replies
View Related
Oct 14, 2009
First off, after restarting my computer one day, I found it to either not get past the loading screen or freeze 5 minutes after if i could log on. I tried a few things that did not work and went to do a system restore from the windows repair tools upon booting up. When i tried to restore i get the message that a system restore cannot be done because the C drive had errors. It prompted me to do a disk consistency check upon restart which i did. After trying a few times i find that it always freezes at 7% through, and will not move. Finally, i tried booting into safe mode, only to find that it too freezes when it is loading files, always at windows/system32/drivers/crcdisk.sys. The computer is only 2 months old, bought brand new at best buy. A rocketfish 550watt power supply and Geforce 9800 video card were installed by the employees, but no other hardware was replaced or tampered with.
View 4 Replies
View Related
