I have just installed Vista Ultimate 64 Bit (on my 500 GB Seagate hard disk, the main hard disk). Then, I added 2 more hard disks (a 1 TB Hitachi and another 500 GB Seagate), so now I have 3 SATA hard disks installed. However, Vista cannot start. Sometimes, it stuck on the boot screen (the one with the scrolling green bar), sometimes it just show black blank screen. I then tried to disconnect, completely, the 2 hard disks I just installed. Vista can boot properly, I can access my data from both hard disks without problem.
When only the 1 TB Hitachi and the main hard disk are connected, Vista can boot properly and I can access my data from both hard disks without problem. When only the other 500 GB Seagate and the main hard disk are connected, Vista can boot properly, I can access my data from both hard disks without problem. However, if I connect the 3 hard disks at the same time, vista doesn't want to boot. I already installed the SATA controller driver from the CD that comes with the motherboard.
My system spec:
- Motherboard: Asus Striker Extreme
- Processor: Intel Core2Duo Dual Core 2.4 Ghz
- RAM: 4 GB (4x1 GB) DDR2
- Graphic Card: Nvidia 8800GTS, from ASUS
- 2 DVD Writers (LG and Sony), both IDE
- 1 Floppy Disk Drive
I've been running my Vista machine with a Seagate hard disk. Works fine in paralell. I tried to hook it up with Firewire on both ends and Vista never recognized the HD. Is there something I am doing wrong?
I have an hp desktop that came with vista home premium preinstalled. It will not boot up now. So I tried the emrgency recovery disks that I was told to createwhen I first got the computer and they didn't work. I thought I would have to boot from windows vista disks to repair this. No Vista disks came with the computer. My question is can I buy the upgrade SP1 disk to both improve the system and resolve the boot problem or am I forced to get the Full system
How do I stop Vista from chewing on my disks. I have had a failure of my C: hard disk and i want to stop Vista from chewing on my disk. Had to replace it and reinstall everything
There are many articles on how to dual boot Vista and XP, but I want to dual boot Vista and Vista, with an existing installation, on 2 Hard Drives. Currently I switch these in the BIOS, but I'd much rather chose at a later stage, can this be done? Why? Because I keep one of the drives for random software that I rarely use.
I have a Toshiba laptop and it has come with a single 120Gb hard disk. However it is partitioned into a C drive and an E drive split 50:50. I don't really need to have two seperate areas in this way and would like to combine them together to have a single logical drive on the laptop. Can I do this from within Windows Vista that is installed on the laptop?
I've recently been struck down with a trojan. I restored my computer to factory defaults, thinking this would do the trick. It did. However, I'm at Ohio State, and they're policy is that you have to totally reformat your hard drive before you'll be able to use the wireless internet. The problem is, i have an HP HDX16, and HP does not ship with Vista install disks, they have a hidden partition. I tried doing a system restore 3 times, and it didnt work. I backed dup the system defaults to an external hard drive,
My question is, how do i format my hard drive without the Vista Disks?
I have two, 1 is a dvd rom, the other is a cd rom, the dvd says that ANYthing that I put in must be formated (dvd, game, drivers... you name it), the cdrom says nothing when I put a disk in. what can I do to fix this?
The tech at HP told me that I need to use the exact same hard drive (Fujitsu 120G) that came with the notebook originally to use the recovery disks to reinstall Vista. Is that true? I wanted to use a Western Digital 160G HD instead.
I want to reinstall Vista using the provided recovery disks using my laptop, and then set up 7 as a dual boot. You know, have Vista for those games, and have 7 for everything else.
I have an Asus G51VX-RX05, which also is referred to as simply G51VX (Best Buy). Yes, I've heard it a million times, don't buy a computer at best buy. I know, I know. I won't do it again, I promise. So I want to use the provided recovery discs from my laptop to reinstall Vista. When I was installing 7 over Vista, I followed this: Clean Install Windows 7 - How to Perform a Clean Installation of Windows 7 - Part 1 of 3...........
I have hp laptop with Vista Home Premium (OEM) installed. I've made Recovery Disks using the Recover Manager. I wish to have a clean install of Vista instead of using the Recovery Disks. I've read previous threads but I have to say I am only getting more confused.
- Can I perform clean install of my Vista OEM? - Can I use any copy of Vista OEM cd and use the Product Key sticked behind my laptop?.........
I have windows xp installed right now and I dual booted with vista by re-partitioning my hard drive. After encountering problems with vista I delted the vista partition and resized the xp partition back to it's original size. I am now stuck with the windows vista boot loader which persistantly telling me that the windows vista files are not present etc. etc. Is there any way that I can delted the vista bootloader and go back to using the xp bootloader?
I have an Existing Vista install on HD1 and want to install Windows 7 on HD2.Was going to make HD2 the Primary Drive. Is there a way I can alternately boot to the HD1 Drive if I need to?
I have a dual boot system - XP on the boot drive and Vista on a slave drive. The boot drive is failing (clicking on boot and often preventing the computer from passing the bios splash screen). The Vista install modified the boot header on the XP boot drive. This means that I cannot just buy a new boot drive and install XP on it because the boot information allowing for dual boot will need to be re-written to it. How do I do this?
Is it possible for me to make a backup of the dual boot information installed by Vista so that when I replace the boot drive I can copy at least some parts of the information to the boot drive? Will I have to reinstall both XP and Vista on the slave drive? It has taken me ages to get a stable Vista install on the legacy mobo and I have finally managed it - I wouldn't want to reinstall Vista from scratch just because the boot drive which contains XP and the dual boot information is dying.
I am planning on putting ubuntu on an external hard drive. If I install Ubuntu on it, can I boot to it? I don't want to change any settings in bios, I just want to boot to ubuntu occasionally.
The only way I am able to boot his with a political CD/DVD in the drive, wait for the "press any key to boot from CD or DVD" prompt comes up, do not hit any key whatsoever and then the normal user prompt/enter password screen comes up. Additionally if I try to "Safe Mode Boot" I Blue Screen.
I was reading the speed up boot time performance tutorial (by a now banned member, no less) and saw that it had an option to improve disk speed by enabling advanced performance for the disk. Is it wise to do this on an installed hard drive? I noticed the optimize disk option was already enabled on my C drive and was wondering if it would be a good idea to enable the advance performance option as well.I just don't want to lose information if I am forced to, say, hard boot the system when if it freezes up.
Issue: Its seen that computer having a samsung hard drive of 320 GB and 500 GB will give black screen with a cursor at the top left corner and it wont boot.
The reason behind this is these hard drives contains a scanner inside them which periodically scans the hard drive to check for error and tries to recover them. Resolution: Enter the Boot device menu(By pressing the F12 or F9 key on the manufacturer logo).
Change the Boot Device
Select HARD DRIVE as the 1st boot priority and press enter. The system may or may not boot...
Here is my situation: I have XP installed on a SATA drive in a computer I just put together (AMD x2 5600+, ASUS M2N-SLI Deluxe, 2Gig Ram) and I want to install another SATA drive with Vista Ultimate 64 bit and I want the ability to dual-boot like some people do when they have 2 operating systems on the same drive but in different partitions. I originally install Vista Ultimate 64 bit as the O/S but it was incompatible with many of the programs I use so I installed XP Pro.Otherwise I liked Vista.
I have built a new system to game with and have 2 new hard drives, on one I put XP Pro and then on the other I loaded Vista. I have more or less completed all the driver upgrades and windows updates but I keep getting repeated boot failures of Vista. I can always get into Safe mode but in Normal mode the boot fails just after the first spash screen at the point when the screen goes blank to be replaced by the small circular
Vista logo. After 2 or 3 attempts it succeeds to load but then the problem seems to reoccur, particularly when I have been back to XP for a while. I had a similar problem with XP but that seems to have sorted itself out. I have tired looking in the logs for faults and failures but no clues there.
I noticed my system getting rather sluggish over the past several days and giving errors at boot-up. I ran a disk cleanup and Check Disk with both options selected. The problem persisted, and CPU utilization was normal, so I started going through the event logs and found a slew of the following errors even after having done everything above:
Log Name: System Source: disk Date: 1/6/2009 2:13:54 PM Event ID: 7 Task Category: None Level: Error...............
I read in the news, this past January, that MSFT was not going to support XP after June 30, 2008. I don't remember the extent of support downside. My concern was that I wanted to be ready and updated. I like having the latest gadgets, especially if helps organize my life. I had the machine to upgrade on, too. I have a HP Media Center PC, Pentium D (dual), and a decent and adequate graphics card. I souped it up to 3.5GB RAM and added a PCI slot for SATA connection. I added the SATA connection because I had just purchased a 750GB external hard drive. I got it for storage and back up. At the time I did not know I could do a dual boot install. I found that out on HP's site.
So I thought that would be the best choice for me, in case Vista did not work out. That made me feel a lot better about the transition. As I started to do the dual set up, I saw my new external drive there with all that room and thought, why not see what happens?????! It???s been a little rocky, I have to say. I like Vista now that the serious stuff is behind me. Microsoft was very helpful. I still lose my connection when I connect through my router.My never ending anxiety is this. Did I do the right thing? Is my external drive sturdy enough to handle the rigors of the Operating System drive? The tech guys said it could not be done. I went ahead and tried and it DID work. I worry that the drive is going to crash. Does anyone have any thoughts about this? The external drive is Western Digital MY Book Home Edition, 750GB, USB, FireWire and SATA connections. The RAID PCI slot I installed is 1.50mbs. I had no PCI express available that would have given it 3mbs. (I think I have the standards right, if not, I bet most who know understand.)The graphics was installed there....
I am running Vista on a Dell D630. My docking station works fine if I boot up with the notebook docked. And my system works fine if I un-dock it. However, if I re-dock the system while the system is turned on (either in standby or awake), some of the time the re-dock will be unsuccessful. By "unsuccessful," I mean that nothing comes up on my monitor (CRT), and there is no way to "wake up" my screen so I can resume working on my system. Even if I undock my system at this point, I can't get the LCD screen to turn back on. So I end up needing to hold down the power button and do a cold re-boot. It drives me crazy. Yesterday it happened FOUR times (every time I came back to my desk and re-docked my system). Does anyone have any recommendations?
my husband's computer won't boot at all. The green light comes on but the hard drive just beeps. It looks at the cd drive but that is it. Is there anything I can do to fix this. I don't have any recovery disks.
I am curious if Vista can be run from one of those portable external hard drives that I see in Staples, etc. rather than have to install another internal hard drive. I want to dual-boot with XP (already installed on an internal HD) and it would also be great if I can bring that external HD with us when we travel and hook it up to my wife's XP laptop and be able to boot up in Vista too. We need something for testing our software in Vista.
When I've installed vista, the installation have set the boot manager to be on a different disk than the the boot loader. Now, if I want to remove the hard drive containing the boot manager, the system won't load, which is reasonable given these conditions, nonetheless I DO want to remove this hard drive and still be able to boot, therefore I've searched and queried everywhere and done the following: Physically disconnected the hard drive with the boot manager on it (d and boot with the Vista DVD to run startup repair -> this didn't help, the startup repair found the operation system but didn't recognize any problem, when trying to boot the system would not load, the error I'm getting when booting is disk read error occurred press ctrl+alt+del to restart.
(reconnected d:, and system boots flawlessly, then) I've manually changed the boot manger (and memory diagnostic, the only other bcd entry on the d: drive) location with bcdedit to c:, and now bcdedit (and VistaBootPro) show the boot manager (and memory diagnostic) in the c: drive, HOWEVER, if I try to boot from that drive I get the same error: disk read error.................
I have installed Vista on my C: disk. After that I installed XP on D: disk. Now I can't boot Vista anymore. I tried with boot.ini. I've read that there's a program called bcdedit.exe. I tried to make that one work on XP, but I failed. I don't have Vista's DVD, and I'm trying to avoid installing XP again. If there's any way around...I would be gratefull! (Is there any way I can edit bcdedit.exe in XP?)
I searched all over the internet for this simple (I think) problem, but I couldn't find any solutions. I have installed Vista on my C: disk. After that I installed XP on D: disk. Now I can't boot Vista anymore. I tried with boot.ini. I've read that there's a program called bcdedit.exe. I tried to make that one work on XP, but I failed.
I had an Vista 32 bit version installed and which was used fine.
3 days before I had upgrade my PC's memory to 4G, then I find Vista 32 Bit version can not recognize all the memory.So I try to install an Vista 64 Bit version for the test to check if the 64 bit system is ok for me.
The problem is, Vista 32 was installed on to the 3rd partition of the harddisk,usually the drive letter will be E in Windows XP and previous version windows, although it in Vista it display as C drive. I tried to install the 64 Bit Vista in to the 4th partiton. After all the drivers and applications install completed,that seems so far so good. Then I find my previous F drive now names C. The Drive C in Vista 32 Bit names E now. When I try to boot into Vista 32, the error message : winload.exe could not find.
I used bcdedit try to redirect the device and osdevice to E drive, Vista 32 still could not start normally, the system will hang up in the blue desktop background,seems can not load user profile or sth like that.
I have check the E drive, all the files of Vista 32 are still there.Anyone have any good idea about fix the Vista 32 bit boot and keep the Vista 64 bit also?
I just installed a new hd WD500g sata to my box. Vista "sees" the new hd in device manager, but doesnt see it in "my computer. It is freshly installed and straight out of the bubble wrap,I was thinking gee, maybe it needs formatted...but i dont see that option anywhere...maybe im missing something.... i donno...first time i've run into this....usually the drives are "seen" right away.....
I am trying to do a clean install on a newly built system but Vista can not see my SATA hard drive. I have a Seagate 7200 barracuda 320 GB SATA HD and a Giga-byte P35 Mobo. Not knowing if it was a Vista issue or a hardware issue, I put in a XP installation disk and XP could recognize the drive. I stopped the install and tried loading some drivers off of the disk from Gigabyte. Vista still can not see the hard drive, but now when I throw the XP install disk back in, it can not see the hard drive either.
